/*
 * Xilinx ML510 Reference Design support
 *
 * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
 * The reference design contains a bug which prevent PCI DMA from working
 * properly.  A description of the bug is given in the plbv46_pci section. It
 * needs to be fixed by the user until Xilinx updates their reference design.
 *
 * Copyright 2009, Roderick Colenbrander
 */

/dts-v1/;
/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
	dcr-parent = <&ppc440_0>;
	DDR2_SDRAM_DIMM0: memory@0 {
		device_type = "memory";
		reg = < 0x0 0x20000000 >;
	} ;
	alias {
		ethernet0 = &Hard_Ethernet_MAC;
		serial0 = &RS232_Uart_1;
	} ;
	chosen {
		bootargs = "console=ttyS0 root=/dev/ram";
		linux,stdout-path = "/plb@0/serial@83e00000";
	} ;
	cpus {
		#address-cells = <1>;
		#cpus = <0x1>;
		#size-cells = <0>;
		ppc440_0: cpu@0 {
			#address-cells = <1>;
			#size-cells = <1>;
			clock-frequency = <300000000>;
			compatible = "PowerPC,440", "ibm,ppc440";
			d-cache-line-size = <0x20>;
			d-cache-size = <0x8000>;
			dcr-access-method = "native";
			dcr-controller ;
			device_type = "cpu";
			i-cache-line-size = <0x20>;
			i-cache-size = <0x8000>;
			model = "PowerPC,440";
			reg = <0>;
			timebase-frequency = <300000000>;
			xlnx,apu-control = <0x2000>;
			xlnx,apu-udi-0 = <0x0>;
			xlnx,apu-udi-1 = <0x0>;
			xlnx,apu-udi-10 = <0x0>;
			xlnx,apu-udi-11 = <0x0>;
			xlnx,apu-udi-12 = <0x0>;
			xlnx,apu-udi-13 = <0x0>;
			xlnx,apu-udi-14 = <0x0>;
			xlnx,apu-udi-15 = <0x0>;
			xlnx,apu-udi-2 = <0x0>;
			xlnx,apu-udi-3 = <0x0>;
			xlnx,apu-udi-4 = <0x0>;
			xlnx,apu-udi-5 = <0x0>;
			xlnx,apu-udi-6 = <0x0>;
			xlnx,apu-udi-7 = <0x0>;
			xlnx,apu-udi-8 = <0x0>;
			xlnx,apu-udi-9 = <0x0>;
			xlnx,dcr-autolock-enable = <0x1>;
			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
			xlnx,dcu-rd-touch-plb-prio = <0x0>;
			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
			xlnx,dcu-wr-flush-plb-prio = <0x0>;
			xlnx,dcu-wr-store-plb-prio = <0x0>;
			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
			xlnx,dma0-control = <0x0>;
			xlnx,dma0-plb-prio = <0x0>;
			xlnx,dma0-rxchannelctrl = <0x1010000>;
			xlnx,dma0-rxirqtimer = <0x3ff>;
			xlnx,dma0-txchannelctrl = <0x1010000>;
			xlnx,dma0-txirqtimer = <0x3ff>;
			xlnx,dma1-control = <0x0>;
			xlnx,dma1-plb-prio = <0x0>;
			xlnx,dma1-rxchannelctrl = <0x1010000>;
			xlnx,dma1-rxirqtimer = <0x3ff>;
			xlnx,dma1-txchannelctrl = <0x1010000>;
			xlnx,dma1-txirqtimer = <0x3ff>;
			xlnx,dma2-control = <0x0>;
			xlnx,dma2-plb-prio = <0x0>;
			xlnx,dma2-rxchannelctrl = <0x1010000>;
			xlnx,dma2-rxirqtimer = <0x3ff>;
			xlnx,dma2-txchannelctrl = <0x1010000>;
			xlnx,dma2-txirqtimer = <0x3ff>;
			xlnx,dma3-control = <0x0>;
			xlnx,dma3-plb-prio = <0x0>;
			xlnx,dma3-rxchannelctrl = <0x1010000>;
			xlnx,dma3-rxirqtimer = <0x3ff>;
			xlnx,dma3-txchannelctrl = <0x1010000>;
			xlnx,dma3-txirqtimer = <0x3ff>;
			xlnx,endian-reset = <0x0>;
			xlnx,generate-plb-timespecs = <0x1>;
			xlnx,icu-rd-fetch-plb-prio = <0x0>;
			xlnx,icu-rd-spec-plb-prio = <0x0>;
			xlnx,icu-rd-touch-plb-prio = <0x0>;
			xlnx,interconnect-imask = <0xffffffff>;
			xlnx,mplb-allow-lock-xfer = <0x1>;
			xlnx,mplb-arb-mode = <0x0>;
			xlnx,mplb-awidth = <0x20>;
			xlnx,mplb-counter = <0x500>;
			xlnx,mplb-dwidth = <0x80>;
			xlnx,mplb-max-burst = <0x8>;
			xlnx,mplb-native-dwidth = <0x80>;
			xlnx,mplb-p2p = <0x0>;
			xlnx,mplb-prio-dcur = <0x2>;
			xlnx,mplb-prio-dcuw = <0x3>;
			xlnx,mplb-prio-icu = <0x4>;
			xlnx,mplb-prio-splb0 = <0x1>;
			xlnx,mplb-prio-splb1 = <0x0>;
			xlnx,mplb-read-pipe-enable = <0x1>;
			xlnx,mplb-sync-tattribute = <0x0>;
			xlnx,mplb-wdog-enable = <0x1>;
			xlnx,mplb-write-pipe-enable = <0x1>;
			xlnx,mplb-write-post-enable = <0x1>;
			xlnx,num-dma = <0x0>;
			xlnx,pir = <0xf>;
			xlnx,ppc440mc-addr-base = <0x0>;
			xlnx,ppc440mc-addr-high = <0x1fffffff>;
			xlnx,ppc440mc-arb-mode = <0x0>;
			xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
			xlnx,ppc440mc-control = <0xf810008f>;
			xlnx,ppc440mc-max-burst = <0x8>;
			xlnx,ppc440mc-prio-dcur = <0x2>;
			xlnx,ppc440mc-prio-dcuw = <0x3>;
			xlnx,ppc440mc-prio-icu = <0x4>;
			xlnx,ppc440mc-prio-splb0 = <0x1>;
			xlnx,ppc440mc-prio-splb1 = <0x0>;
			xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
			xlnx,ppcdm-asyncmode = <0x0>;
			xlnx,ppcds-asyncmode = <0x0>;
			xlnx,user-reset = <0x0>;
		} ;
	} ;
	plb_v46_0: plb@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
		ranges ;
		FLASH: flash@fc000000 {
			bank-width = <2>;
			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
			reg = < 0xfc000000 0x2000000 >;
			xlnx,family = "virtex5";
			xlnx,include-datawidth-matching-0 = <0x1>;
			xlnx,include-datawidth-matching-1 = <0x0>;
			xlnx,include-datawidth-matching-2 = <0x0>;
			xlnx,include-datawidth-matching-3 = <0x0>;
			xlnx,include-negedge-ioregs = <0x0>;
			xlnx,include-plb-ipif = <0x1>;
			xlnx,include-wrbuf = <0x1>;
			xlnx,max-mem-width = <0x10>;
			xlnx,mch-native-dwidth = <0x20>;
			xlnx,mch-plb-clk-period-ps = <0x2710>;
			xlnx,mch-splb-awidth = <0x20>;
			xlnx,mch0-accessbuf-depth = <0x10>;
			xlnx,mch0-protocol = <0x0>;
			xlnx,mch0-rddatabuf-depth = <0x10>;
			xlnx,mch1-accessbuf-depth = <0x10>;
			xlnx,mch1-protocol = <0x0>;
			xlnx,mch1-rddatabuf-depth = <0x10>;
			xlnx,mch2-accessbuf-depth = <0x10>;
			xlnx,mch2-protocol = <0x0>;
			xlnx,mch2-rddatabuf-depth = <0x10>;
			xlnx,mch3-accessbuf-depth = <0x10>;
			xlnx,mch3-protocol = <0x0>;
			xlnx,mch3-rddatabuf-depth = <0x10>;
			xlnx,mem0-width = <0x10>;
			xlnx,mem1-width = <0x20>;
			xlnx,mem2-width = <0x20>;
			xlnx,mem3-width = <0x20>;
			xlnx,num-banks-mem = <0x1>;
			xlnx,num-channels = <0x2>;
			xlnx,priority-mode = <0x0>;
			xlnx,synch-mem-0 = <0x0>;
			xlnx,synch-mem-1 = <0x0>;
			xlnx,synch-mem-2 = <0x0>;
			xlnx,synch-mem-3 = <0x0>;
			xlnx,synch-pipedelay-0 = <0x2>;
			xlnx,synch-pipedelay-1 = <0x2>;
			xlnx,synch-pipedelay-2 = <0x2>;
			xlnx,synch-pipedelay-3 = <0x2>;
			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
			xlnx,tavdv-ps-mem-1 = <0x3a98>;
			xlnx,tavdv-ps-mem-2 = <0x3a98>;
			xlnx,tavdv-ps-mem-3 = <0x3a98>;
			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
			xlnx,tcedv-ps-mem-1 = <0x3a98>;
			xlnx,tcedv-ps-mem-2 = <0x3a98>;
			xlnx,tcedv-ps-mem-3 = <0x3a98>;
			xlnx,thzce-ps-mem-0 = <0x88b8>;
			xlnx,thzce-ps-mem-1 = <0x1b58>;
			xlnx,thzce-ps-mem-2 = <0x1b58>;
			xlnx,thzce-ps-mem-3 = <0x1b58>;
			xlnx,thzoe-ps-mem-0 = <0x1b58>;
			xlnx,thzoe-ps-mem-1 = <0x1b58>;
			xlnx,thzoe-ps-mem-2 = <0x1b58>;
			xlnx,thzoe-ps-mem-3 = <0x1b58>;
			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
			xlnx,tlzwe-ps-mem-1 = <0x0>;
			xlnx,tlzwe-ps-mem-2 = <0x0>;
			xlnx,tlzwe-ps-mem-3 = <0x0>;
			xlnx,twc-ps-mem-0 = <0x1adb0>;
			xlnx,twc-ps-mem-1 = <0x3a98>;
			xlnx,twc-ps-mem-2 = <0x3a98>;
			xlnx,twc-ps-mem-3 = <0x3a98>;
			xlnx,twp-ps-mem-0 = <0x11170>;
			xlnx,twp-ps-mem-1 = <0x2ee0>;
			xlnx,twp-ps-mem-2 = <0x2ee0>;
			xlnx,twp-ps-mem-3 = <0x2ee0>;
			xlnx,xcl0-linesize = <0x4>;
			xlnx,xcl0-writexfer = <0x1>;
			xlnx,xcl1-linesize = <0x4>;
			xlnx,xcl1-writexfer = <0x1>;
			xlnx,xcl2-linesize = <0x4>;
			xlnx,xcl2-writexfer = <0x1>;
			xlnx,xcl3-linesize = <0x4>;
			xlnx,xcl3-writexfer = <0x1>;
		} ;
		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "xlnx,compound";
			ethernet@81c00000 {
				compatible = "xlnx,xps-ll-temac-1.01.b";
				device_type = "network";
				interrupt-parent = <&xps_intc_0>;
				interrupts = < 8 2 >;
				llink-connected = <&Hard_Ethernet_MAC_fifo>;
				local-mac-address = [ 02 00 00 00 00 00 ];
				reg = < 0x81c00000 0x40 >;
				xlnx,bus2core-clk-ratio = <0x1>;
				xlnx,phy-type = <0x3>;
				xlnx,phyaddr = <0x1>;
				xlnx,rxcsum = <0x0>;
				xlnx,rxfifo = <0x8000>;
				xlnx,temac-type = <0x0>;
				xlnx,txcsum = <0x0>;
				xlnx,txfifo = <0x8000>;
			} ;
		} ;
		Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
			compatible = "xlnx,xps-ll-fifo-1.01.a";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 6 2 >;
			reg = < 0x81a00000 0x10000 >;
			xlnx,family = "virtex5";
		} ;
		IIC_EEPROM: i2c@81600000 {
			compatible = "xlnx,xps-iic-2.00.a";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 9 2 >;
			reg = < 0x81600000 0x10000 >;
			xlnx,clk-freq = <0x5f5e100>;
			xlnx,family = "virtex5";
			xlnx,gpo-width = <0x1>;
			xlnx,iic-freq = <0x186a0>;
			xlnx,scl-inertial-delay = <0x5>;
			xlnx,sda-inertial-delay = <0x5>;
			xlnx,ten-bit-adr = <0x0>;
		} ;
		LCD_OPTIONAL: gpio@81420000 {
			compatible = "xlnx,xps-gpio-1.00.a";
			reg = < 0x81420000 0x10000 >;
			xlnx,all-inputs = <0x0>;
			xlnx,all-inputs-2 = <0x0>;
			xlnx,dout-default = <0x0>;
			xlnx,dout-default-2 = <0x0>;
			xlnx,family = "virtex5";
			xlnx,gpio-width = <0xb>;
			xlnx,interrupt-present = <0x0>;
			xlnx,is-bidir = <0x1>;
			xlnx,is-bidir-2 = <0x1>;
			xlnx,is-dual = <0x0>;
			xlnx,tri-default = <0xffffffff>;
			xlnx,tri-default-2 = <0xffffffff>;
		} ;
		LEDs_4Bit: gpio@81400000 {
			compatible = "xlnx,xps-gpio-1.00.a";
			reg = < 0x81400000 0x10000 >;
			xlnx,all-inputs = <0x0>;
			xlnx,all-inputs-2 = <0x0>;
			xlnx,dout-default = <0x0>;
			xlnx,dout-default-2 = <0x0>;
			xlnx,family = "virtex5";
			xlnx,gpio-width = <0x4>;
			xlnx,interrupt-present = <0x0>;
			xlnx,is-bidir = <0x1>;
			xlnx,is-bidir-2 = <0x1>;
			xlnx,is-dual = <0x0>;
			xlnx,tri-default = <0xffffffff>;
			xlnx,tri-default-2 = <0xffffffff>;
		} ;
		RS232_Uart_1: serial@83e00000 {
			clock-frequency = <100000000>;
			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
			current-speed = <9600>;
			device_type = "serial";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 11 2 >;
			reg = < 0x83e00000 0x10000 >;
			reg-offset = <0x1003>;
			reg-shift = <2>;
			xlnx,family = "virtex5";
			xlnx,has-external-rclk = <0x0>;
			xlnx,has-external-xin = <0x0>;
			xlnx,is-a-16550 = <0x1>;
		} ;
		SPI_EEPROM: xps-spi@feff8000 {
			compatible = "xlnx,xps-spi-2.00.b";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 10 2 >;
			reg = < 0xfeff8000 0x80 >;
			xlnx,family = "virtex5";
			xlnx,fifo-exist = <0x1>;
			xlnx,num-ss-bits = <0x1>;
			xlnx,num-transfer-bits = <0x8>;
			xlnx,sck-ratio = <0x80>;
		} ;
		SysACE_CompactFlash: sysace@83600000 {
			compatible = "xlnx,xps-sysace-1.00.a";
			interrupt-parent = <&xps_intc_0>;
			interrupts = < 7 2 >;
			reg = < 0x83600000 0x10000 >;
			xlnx,family = "virtex5";
			xlnx,mem-width = <0x10>;
		} ;
		plbv46_pci_0: plbv46-pci@85e00000 {
			#size-cells = <2>;
			#address-cells = <3>;
			compatible = "xlnx,plbv46-pci-1.03.a";
			device_type = "pci";
			reg = < 0x85e00000 0x10000 >;

			/*
			 * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
			 * 0 which means that a read/write to the memory mapped
			 * i/o region (which starts at 0xa0000000) for pci
			 * bar 0 on the plb side translates to 0.
			 * It is important to set this value to 0xa0000000, so
			 * that inbound and outbound pci transactions work
			 * properly including DMA.
			 */
			ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
				  0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;

			#interrupt-cells = <1>;
			interrupt-parent = <&xps_intc_0>;
			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
			interrupt-map = <
				/* IRQ mapping for pci slots and ALI M1533
				 * periperhals. In total there are 5 interrupt
				 * lines connected to a xps_intc controller.
				 * Four of them are PCI IRQ A, B, C, D and
				 * which correspond to respectively xpx_intc
				 * 5, 4, 3 and 2.  The fifth interrupt line is
				 * connected to the south bridge and this one
				 * uses irq 1 and is active high instead of
				 * active low.
				 *
				 * The M1533 contains various peripherals
				 * including AC97 audio, a modem, USB, IDE and
				 * some power management stuff. The modem
				 * isn't connected on the ML510 and the power
				 * management core also isn't used.
				 */

				/* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
				0x3000 0 0 1 &xps_intc_0 3 2
				0x3000 0 0 2 &xps_intc_0 2 2
				0x3000 0 0 3 &xps_intc_0 5 2
				0x3000 0 0 4 &xps_intc_0 4 2

				/* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
				/*
				0x11800 0 0 1 &xps_intc_0 5 0 2
				0x11800 0 0 2 &xps_intc_0 4 0 2
				0x11800 0 0 3 &xps_intc_0 3 0 2
				0x11800 0 0 4 &xps_intc_0 2 0 2
				*/

				/* According to the datasheet + schematic
				 * ABCD [FPGA] of slot 5 is mapped to DABC.
				 * Testing showed that at least A maps to B,
				 * the mapping of the other pins is a guess
				 * and for that reason the lines have been
				 * commented out.
				 */
				/* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
				0x2800 0 0 1 &xps_intc_0 4 2
				/*
				0x2800 0 0 2 &xps_intc_0 3 2
				0x2800 0 0 3 &xps_intc_0 2 2
				0x2800 0 0 4 &xps_intc_0 5 2
				*/

				/* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
				/*
				0x11000 0 0 1 &xps_intc_0 4 0 2
				0x11000 0 0 2 &xps_intc_0 3 0 2
				0x11000 0 0 3 &xps_intc_0 2 0 2
				0x11000 0 0 4 &xps_intc_0 5 0 2
				*/

				/* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
				0x0800 0 0 1 &i8259 7 2

				/* IDSEL 0x1b / dev=11, bus=0 / IDE */
				0x5800 0 0 1 &i8259 14 2

				/* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
				0x7800 0 0 1 &i8259 7 2
			>;
			ali_m1533 {
				#size-cells = <1>;
				#address-cells = <2>;
				i8259: interrupt-controller@20 {
					reg = <1 0x20 2
							1 0xa0 2
							1 0x4d0 2>;
					interrupt-controller;
					device_type = "interrupt-controller";
					#address-cells = <0>;
					#interrupt-cells = <2>;
					compatible = "chrp,iic";

					/* south bridge irq is active high */
					interrupts = <1 3>;
					interrupt-parent = <&xps_intc_0>;
				};
			};
		} ;
		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
			reg = < 0xffff0000 0x10000 >;
			xlnx,family = "virtex5";
		} ;
		xps_intc_0: interrupt-controller@81800000 {
			#interrupt-cells = <0x2>;
			compatible = "xlnx,xps-intc-1.00.a";
			interrupt-controller ;
			reg = < 0x81800000 0x10000 >;
			xlnx,num-intr-inputs = <0xc>;
		} ;
		xps_tft_0: tft@86e00000 {
			compatible = "xlnx,xps-tft-1.00.a";
			reg = < 0x86e00000 0x10000 >;
			xlnx,dcr-splb-slave-if = <0x1>;
			xlnx,default-tft-base-addr = <0x0>;
			xlnx,family = "virtex5";
			xlnx,i2c-slave-addr = <0x76>;
			xlnx,mplb-awidth = <0x20>;
			xlnx,mplb-dwidth = <0x80>;
			xlnx,mplb-native-dwidth = <0x40>;
			xlnx,mplb-smallest-slave = <0x20>;
			xlnx,tft-interface = <0x1>;
		} ;
	} ;
}  ;