#
# Intel network device configuration
#

config NET_VENDOR_INTEL
	bool "Intel devices"
	default y
	---help---
	  If you have a network (Ethernet) card belonging to this class, say Y.

	  Note that the answer to this question doesn't directly affect the
	  kernel: saying N will just cause the configurator to skip all
	  the questions about Intel cards. If you say Y, you will be asked for
	  your specific card in the following questions.

if NET_VENDOR_INTEL

config E100
	tristate "Intel(R) PRO/100+ support"
	depends on PCI
	select MII
	---help---
	  This driver supports Intel(R) PRO/100 family of adapters.
	  To verify that your adapter is supported, find the board ID number
	  on the adapter. Look for a label that has a barcode and a number
	  in the format 123456-001 (six digits hyphen three digits).

	  Use the above information and the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  to identify the adapter.

	  For the latest Intel PRO/100 network driver for Linux, see:

	  <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e100.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called e100.

config E1000
	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
	depends on PCI
	---help---
	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called e1000.

config E1000E
	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
	depends on PCI && (!SPARC32 || BROKEN)
	select CRC32
	select PTP_1588_CLOCK
	---help---
	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
	  use the regular e1000 driver For more information on how to
	  identify your adapter, go to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called e1000e.

config IGB
	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
	depends on PCI
	select PTP_1588_CLOCK
	select I2C
	select I2C_ALGOBIT
	---help---
	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called igb.

config IGB_HWMON
	bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
	default y
	depends on IGB && HWMON && !(IGB=y && HWMON=m)
	---help---
	  Say Y if you want to expose thermal sensor data on Intel devices.

	  Some of our devices contain thermal sensors, both external and internal.
	  This data is available via the hwmon sysfs interface and exposes
	  the onboard sensors.

config IGB_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IGB && DCA && !(IGB=y && DCA=m)
	---help---
	  Say Y here if you want to use Direct Cache Access (DCA) in the
	  driver.  DCA is a method for warming the CPU cache before data
	  is used, with the intent of lessening the impact of cache misses.

config IGBVF
	tristate "Intel(R) 82576 Virtual Function Ethernet support"
	depends on PCI
	---help---
	  This driver supports Intel(R) 82576 virtual functions.  For more
	  information on how to identify your adapter, go to the Adapter &
	  Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/e1000.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called igbvf.

config IXGB
	tristate "Intel(R) PRO/10GbE support"
	depends on PCI
	---help---
	  This driver supports Intel(R) PRO/10GbE family of adapters for
	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
	  instead. For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/ixgb.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called ixgb.

config IXGBE
	tristate "Intel(R) 10GbE PCI Express adapters support"
	depends on PCI
	select MDIO
	select PTP_1588_CLOCK
	---help---
	  This driver supports Intel(R) 10GbE PCI Express family of
	  adapters.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called ixgbe.

config IXGBE_VXLAN
	bool "Virtual eXtensible Local Area Network Support"
	default n
	depends on IXGBE && VXLAN && !(IXGBE=y && VXLAN=m)
	---help---
	  This allows one to create VXLAN virtual interfaces that provide
	  Layer 2 Networks over Layer 3 Networks. VXLAN is often used
	  to tunnel virtual network infrastructure in virtualized environments.
	  Say Y here if you want to use Virtual eXtensible Local Area Network
	  (VXLAN) in the driver.

config IXGBE_HWMON
	bool "Intel(R) 10GbE PCI Express adapters HWMON support"
	default y
	depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
	---help---
	  Say Y if you want to expose the thermal sensor data on some of
	  our cards, via a hwmon sysfs interface.

config IXGBE_DCA
	bool "Direct Cache Access (DCA) Support"
	default y
	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
	---help---
	  Say Y here if you want to use Direct Cache Access (DCA) in the
	  driver.  DCA is a method for warming the CPU cache before data
	  is used, with the intent of lessening the impact of cache misses.

config IXGBE_DCB
	bool "Data Center Bridging (DCB) Support"
	default n
	depends on IXGBE && DCB
	---help---
	  Say Y here if you want to use Data Center Bridging (DCB) in the
	  driver.

	  If unsure, say N.

config IXGBEVF
	tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
	depends on PCI_MSI
	---help---
	  This driver supports Intel(R) PCI Express virtual functions for the
	  Intel(R) ixgbe driver.  For more information on how to identify your
	  adapter, go to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/sb/CS-008441.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  More specific information on configuring the driver is in
	  <file:Documentation/networking/ixgbevf.txt>.

	  To compile this driver as a module, choose M here. The module
	  will be called ixgbevf.  MSI-X interrupt support is required
	  for this driver to work correctly.

config I40E
	tristate "Intel(R) Ethernet Controller XL710 Family support"
	select PTP_1588_CLOCK
	depends on PCI
	---help---
	  This driver supports Intel(R) Ethernet Controller XL710 Family of
	  devices.  For more information on how to identify your adapter, go
	  to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called i40e.

config I40E_VXLAN
	bool "Virtual eXtensible Local Area Network Support"
	default n
	depends on I40E && VXLAN && !(I40E=y && VXLAN=m)
	---help---
	  This allows one to create VXLAN virtual interfaces that provide
	  Layer 2 Networks over Layer 3 Networks. VXLAN is often used
	  to tunnel virtual network infrastructure in virtualized environments.
	  Say Y here if you want to use Virtual eXtensible Local Area Network
	  (VXLAN) in the driver.

config I40E_DCB
	bool "Data Center Bridging (DCB) Support"
	default n
	depends on I40E && DCB
	---help---
	  Say Y here if you want to use Data Center Bridging (DCB) in the
	  driver.

	  If unsure, say N.

config I40E_FCOE
	bool "Fibre Channel over Ethernet (FCoE)"
	default n
	depends on I40E && DCB && FCOE
	---help---
	  Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
	  in the driver. This will create new netdev for exclusive FCoE
	  use with XL710 FCoE offloads enabled.

	  If unsure, say N.

config I40EVF
	tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
	depends on PCI_MSI
	---help---
	  This driver supports Intel(R) XL710 and X710 virtual functions.
	  For more information on how to identify your adapter, go to the
	  Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/sb/CS-008441.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called i40evf.  MSI-X interrupt support is required
	  for this driver to work correctly.

config FM10K
	tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
	default n
	depends on PCI_MSI
	select PTP_1588_CLOCK
	---help---
	  This driver supports Intel(R) FM10000 Ethernet Switch Host
	  Interface.  For more information on how to identify your adapter,
	  go to the Adapter & Driver ID Guide at:

	  <http://support.intel.com/support/network/sb/CS-008441.htm>

	  For general information and support, go to the Intel support
	  website at:

	  <http://support.intel.com>

	  To compile this driver as a module, choose M here. The module
	  will be called fm10k.  MSI-X interrupt support is required

config FM10K_VXLAN
	bool "Virtual eXtensible Local Area Network Support"
	default n
	depends on FM10K && VXLAN && !(FM10K=y && VXLAN=m)
	---help---
	  This allows one to create VXLAN virtual interfaces that provide
	  Layer 2 Networks over Layer 3 Networks. VXLAN is often used
	  to tunnel virtual network infrastructure in virtualized environments.
	  Say Y here if you want to use Virtual eXtensible Local Area Network
	  (VXLAN) in the driver.

endif # NET_VENDOR_INTEL