**************************
Freescale i.MX25 PDK board
**************************

This file documents the Buildroot support for the Freescale i.MX25 PDK board.

Build
=====

First, configure Buildroot for the i.MX25 PDK board:

make mx25pdk_defconfig

Build all components:

make

You will find in output/images/ the following files:
- imx25-pdk.dtb
- rootfs.ext4
- rootfs.tar
- sdcard.img
- u-boot.imx
- zImage

Create a bootable SD card
=========================

To determine the device associated to the SD card have a look in the
/proc/partitions file:

cat /proc/partitions

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on a SD card. Launch the following
command as root:

dd if=output/images/sdcard.img of=/dev/

*** WARNING! This will destroy all the card content. Use with care! ***

For details about the medium image layout, see the definition in
board/freescale/imx25pdk/genimage.cfg.

Boot the i.MX25 PDK board
=========================

To boot your newly created system:
- insert the SD card in the SD slot of the board;
- put a USB cable into the Debug USB Port and connect using a terminal
emulator at 115200 bps, 8n1;
- power on the board.

Enjoy!