twl6030-irq.c 13.8 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485
/*
 * twl6030-irq.c - TWL6030 irq support
 *
 * Copyright (C) 2005-2009 Texas Instruments, Inc.
 *
 * Modifications to defer interrupt handling to a kernel thread:
 * Copyright (C) 2006 MontaVista Software, Inc.
 *
 * Based on tlv320aic23.c:
 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
 *
 * Code cleanup and modifications to IRQ handler.
 * by syed khasim <x0khasim@ti.com>
 *
 * TWL6030 specific code and IRQ handling changes by
 * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
 * Balaji T K <balajitk@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */

#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <linux/suspend.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/of_device.h>

#include "twl-core.h"

/*
 * TWL6030 (unlike its predecessors, which had two level interrupt handling)
 * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
 * It exposes status bits saying who has raised an interrupt. There are
 * three mask registers that corresponds to these status registers, that
 * enables/disables these interrupts.
 *
 * We set up IRQs starting at a platform-specified base. An interrupt map table,
 * specifies mapping between interrupt number and the associated module.
 */
#define TWL6030_NR_IRQS    20

static int twl6030_interrupt_mapping[24] = {
	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/
	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/
	PWR_INTR_OFFSET,	/* Bit 2	BAT_VLOW		*/
	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/
	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/
	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/
	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/
	SMPSLDO_INTR_OFFSET,	/* Bit 7	VMMC_SHORT		*/

	SMPSLDO_INTR_OFFSET,	/* Bit 8	VUSIM_SHORT		*/
	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/
	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/
	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/
	RSV_INTR_OFFSET,  	/* Bit 12	Reserved		*/
	MADC_INTR_OFFSET,	/* Bit 13	GPADC_RT_EOC		*/
	MADC_INTR_OFFSET,	/* Bit 14	GPADC_SW_EOC		*/
	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/

	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/
	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/
	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/
	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/
	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/
	CHARGERFAULT_INTR_OFFSET,	/* Bit 21	EXT_CHRG	*/
	CHARGERFAULT_INTR_OFFSET,	/* Bit 22	INT_CHRG	*/
	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/
};

static int twl6032_interrupt_mapping[24] = {
	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/
	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/
	PWR_INTR_OFFSET,	/* Bit 2	SYS_VLOW		*/
	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/
	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/
	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/
	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/
	PWR_INTR_OFFSET,	/* Bit 7	SPDURATION		*/

	PWR_INTR_OFFSET,	/* Bit 8	WATCHDOG		*/
	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/
	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/
	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/
	MADC_INTR_OFFSET,	/* Bit 12	GPADC_RT_EOC		*/
	MADC_INTR_OFFSET,	/* Bit 13	GPADC_SW_EOC		*/
	GASGAUGE_INTR_OFFSET,	/* Bit 14	CC_EOC			*/
	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/

	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/
	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/
	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/
	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/
	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/
	CHARGERFAULT_INTR_OFFSET,	/* Bit 21	EXT_CHRG	*/
	CHARGERFAULT_INTR_OFFSET,	/* Bit 22	INT_CHRG	*/
	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/
};

/*----------------------------------------------------------------------*/

struct twl6030_irq {
	unsigned int		irq_base;
	int			twl_irq;
	bool			irq_wake_enabled;
	atomic_t		wakeirqs;
	struct notifier_block	pm_nb;
	struct irq_chip		irq_chip;
	struct irq_domain	*irq_domain;
	const int		*irq_mapping_tbl;
};

static struct twl6030_irq *twl6030_irq;

static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
				   unsigned long pm_event, void *unused)
{
	int chained_wakeups;
	struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq,
						  pm_nb);

	switch (pm_event) {
	case PM_SUSPEND_PREPARE:
		chained_wakeups = atomic_read(&pdata->wakeirqs);

		if (chained_wakeups && !pdata->irq_wake_enabled) {
			if (enable_irq_wake(pdata->twl_irq))
				pr_err("twl6030 IRQ wake enable failed\n");
			else
				pdata->irq_wake_enabled = true;
		} else if (!chained_wakeups && pdata->irq_wake_enabled) {
			disable_irq_wake(pdata->twl_irq);
			pdata->irq_wake_enabled = false;
		}

		disable_irq(pdata->twl_irq);
		break;

	case PM_POST_SUSPEND:
		enable_irq(pdata->twl_irq);
		break;

	default:
		break;
	}

	return NOTIFY_DONE;
}

/*
* Threaded irq handler for the twl6030 interrupt.
* We query the interrupt controller in the twl6030 to determine
* which module is generating the interrupt request and call
* handle_nested_irq for that module.
*/
static irqreturn_t twl6030_irq_thread(int irq, void *data)
{
	int i, ret;
	union {
		u8 bytes[4];
		__le32 int_sts;
	} sts;
	u32 int_sts; /* sts.int_sts converted to CPU endianness */
	struct twl6030_irq *pdata = data;

	/* read INT_STS_A, B and C in one shot using a burst read */
	ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3);
	if (ret) {
		pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);
		return IRQ_HANDLED;
	}

	sts.bytes[3] = 0; /* Only 24 bits are valid*/

	/*
	 * Since VBUS status bit is not reliable for VBUS disconnect
	 * use CHARGER VBUS detection status bit instead.
	 */
	if (sts.bytes[2] & 0x10)
		sts.bytes[2] |= 0x08;

	int_sts = le32_to_cpu(sts.int_sts);
	for (i = 0; int_sts; int_sts >>= 1, i++)
		if (int_sts & 0x1) {
			int module_irq =
				irq_find_mapping(pdata->irq_domain,
						 pdata->irq_mapping_tbl[i]);
			if (module_irq)
				handle_nested_irq(module_irq);
			else
				pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",
				       i);
			pr_debug("twl6030_irq: PIH ISR %u, virq%u\n",
				 i, module_irq);
		}

	/*
	 * NOTE:
	 * Simulation confirms that documentation is wrong w.r.t the
	 * interrupt status clear operation. A single *byte* write to
	 * any one of STS_A to STS_C register results in all three
	 * STS registers being reset. Since it does not matter which
	 * value is written, all three registers are cleared on a
	 * single byte write, so we just use 0x0 to clear.
	 */
	ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
	if (ret)
		pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");

	return IRQ_HANDLED;
}

/*----------------------------------------------------------------------*/

static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
{
	struct twl6030_irq *pdata = irq_get_chip_data(d->irq);

	if (on)
		atomic_inc(&pdata->wakeirqs);
	else
		atomic_dec(&pdata->wakeirqs);

	return 0;
}

int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
{
	int ret;
	u8 unmask_value;
	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
			REG_INT_STS_A + offset);
	unmask_value &= (~(bit_mask));
	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
			REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
	return ret;
}
EXPORT_SYMBOL(twl6030_interrupt_unmask);

int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
{
	int ret;
	u8 mask_value;
	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
			REG_INT_STS_A + offset);
	mask_value |= (bit_mask);
	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
			REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
	return ret;
}
EXPORT_SYMBOL(twl6030_interrupt_mask);

int twl6030_mmc_card_detect_config(void)
{
	int ret;
	u8 reg_val = 0;

	/* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
						REG_INT_MSK_LINE_B);
	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
						REG_INT_MSK_STS_B);
	/*
	 * Initially Configuring MMC_CTRL for receiving interrupts &
	 * Card status on TWL6030 for MMC1
	 */
	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
	if (ret < 0) {
		pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
		return ret;
	}
	reg_val &= ~VMMC_AUTO_OFF;
	reg_val |= SW_FC;
	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
	if (ret < 0) {
		pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
		return ret;
	}

	/* Configuring PullUp-PullDown register */
	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
						TWL6030_CFG_INPUT_PUPD3);
	if (ret < 0) {
		pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
									ret);
		return ret;
	}
	reg_val &= ~(MMC_PU | MMC_PD);
	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
						TWL6030_CFG_INPUT_PUPD3);
	if (ret < 0) {
		pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
									ret);
		return ret;
	}

	return irq_find_mapping(twl6030_irq->irq_domain,
				 MMCDETECT_INTR_OFFSET);
}
EXPORT_SYMBOL(twl6030_mmc_card_detect_config);

int twl6030_mmc_card_detect(struct device *dev, int slot)
{
	int ret = -EIO;
	u8 read_reg = 0;
	struct platform_device *pdev = to_platform_device(dev);

	if (pdev->id) {
		/* TWL6030 provide's Card detect support for
		 * only MMC1 controller.
		 */
		pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
		return ret;
	}
	/*
	 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
	 * 0 - Card not present ,1 - Card present
	 */
	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
						TWL6030_MMCCTRL);
	if (ret >= 0)
		ret = read_reg & STS_MMC;
	return ret;
}
EXPORT_SYMBOL(twl6030_mmc_card_detect);

static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
			      irq_hw_number_t hwirq)
{
	struct twl6030_irq *pdata = d->host_data;

	irq_set_chip_data(virq, pdata);
	irq_set_chip_and_handler(virq,  &pdata->irq_chip, handle_simple_irq);
	irq_set_nested_thread(virq, true);
	irq_set_parent(virq, pdata->twl_irq);

#ifdef CONFIG_ARM
	/*
	 * ARM requires an extra step to clear IRQ_NOREQUEST, which it
	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
	 */
	set_irq_flags(virq, IRQF_VALID);
#else
	/* same effect on other architectures */
	irq_set_noprobe(virq);
#endif

	return 0;
}

static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq)
{
#ifdef CONFIG_ARM
	set_irq_flags(virq, 0);
#endif
	irq_set_chip_and_handler(virq, NULL, NULL);
	irq_set_chip_data(virq, NULL);
}

static struct irq_domain_ops twl6030_irq_domain_ops = {
	.map	= twl6030_irq_map,
	.unmap	= twl6030_irq_unmap,
	.xlate	= irq_domain_xlate_onetwocell,
};

static const struct of_device_id twl6030_of_match[] = {
	{.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
	{.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
	{ },
};

int twl6030_init_irq(struct device *dev, int irq_num)
{
	struct			device_node *node = dev->of_node;
	int			nr_irqs;
	int			status;
	u8			mask[3];
	const struct of_device_id *of_id;

	of_id = of_match_device(twl6030_of_match, dev);
	if (!of_id || !of_id->data) {
		dev_err(dev, "Unknown TWL device model\n");
		return -EINVAL;
	}

	nr_irqs = TWL6030_NR_IRQS;

	twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL);
	if (!twl6030_irq) {
		dev_err(dev, "twl6030_irq: Memory allocation failed\n");
		return -ENOMEM;
	}

	mask[0] = 0xFF;
	mask[1] = 0xFF;
	mask[2] = 0xFF;

	/* mask all int lines */
	status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
	/* mask all int sts */
	status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
	/* clear INT_STS_A,B,C */
	status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);

	if (status < 0) {
		dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status);
		return status;
	}

	/*
	 * install an irq handler for each of the modules;
	 * clone dummy irq_chip since PIH can't *do* anything
	 */
	twl6030_irq->irq_chip = dummy_irq_chip;
	twl6030_irq->irq_chip.name = "twl6030";
	twl6030_irq->irq_chip.irq_set_type = NULL;
	twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake;

	twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;
	atomic_set(&twl6030_irq->wakeirqs, 0);
	twl6030_irq->irq_mapping_tbl = of_id->data;

	twl6030_irq->irq_domain =
		irq_domain_add_linear(node, nr_irqs,
				      &twl6030_irq_domain_ops, twl6030_irq);
	if (!twl6030_irq->irq_domain) {
		dev_err(dev, "Can't add irq_domain\n");
		return -ENOMEM;
	}

	dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num);

	/* install an irq handler to demultiplex the TWL6030 interrupt */
	status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread,
				      IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq);
	if (status < 0) {
		dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
		goto fail_irq;
	}

	twl6030_irq->twl_irq = irq_num;
	register_pm_notifier(&twl6030_irq->pm_nb);
	return 0;

fail_irq:
	irq_domain_remove(twl6030_irq->irq_domain);
	return status;
}

int twl6030_exit_irq(void)
{
	if (twl6030_irq && twl6030_irq->twl_irq) {
		unregister_pm_notifier(&twl6030_irq->pm_nb);
		free_irq(twl6030_irq->twl_irq, NULL);
		/*
		 * TODO: IRQ domain and allocated nested IRQ descriptors
		 * should be freed somehow here. Now It can't be done, because
		 * child devices will not be deleted during removing of
		 * TWL Core driver and they will still contain allocated
		 * virt IRQs in their Resources tables.
		 * The same prevents us from using devm_request_threaded_irq()
		 * in this module.
		 */
	}
	return 0;
}