nv_tco.h
2.01 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
/*
* nv_tco: TCO timer driver for nVidia chipsets.
*
* (c) Copyright 2005 Google Inc., All Rights Reserved.
*
* Supported Chipsets:
* - MCP51/MCP55
*
* (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
* Reserved.
* http://www.kernelconcepts.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Neither kernel concepts nor Nils Faerber admit liability nor provide
* warranty for any of this software. This material is provided
* "AS-IS" and at no charge.
*
* (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
* developed for
* Jentro AG, Haar/Munich (Germany)
*
* TCO timer driver for NV chipsets
* based on softdog.c by Alan Cox <alan@redhat.com>
*/
/*
* Some address definitions for the TCO
*/
#define TCO_RLD(base) ((base) + 0x00) /* TCO Timer Reload and Current Value */
#define TCO_TMR(base) ((base) + 0x01) /* TCO Timer Initial Value */
#define TCO_STS(base) ((base) + 0x04) /* TCO Status Register */
/*
* TCO Boot Status bit: set on TCO reset, reset by software or standby
* power-good (survives reboots), unfortunately this bit is never
* set.
*/
# define TCO_STS_BOOT_STS (1 << 9)
/*
* first and 2nd timeout status bits, these also survive a warm boot,
* and they work, so we use them.
*/
# define TCO_STS_TCO_INT_STS (1 << 1)
# define TCO_STS_TCO2TO_STS (1 << 10)
# define TCO_STS_RESET (TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \
TCO_STS_TCO_INT_STS)
#define TCO_CNT(base) ((base) + 0x08) /* TCO Control Register */
# define TCO_CNT_TCOHALT (1 << 12)
#define MCP51_SMBUS_SETUP_B 0xe8
# define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25)
/*
* The SMI_EN register is at the base io address + 0x04,
* while TCOBASE is + 0x40.
*/
#define MCP51_SMI_EN(base) ((base) - 0x40 + 0x04)
# define MCP51_SMI_EN_TCO ((1 << 4) | (1 << 5))