isotp.h
2.86 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
/*
* socketcan/can/isotp.h
*
* Definitions for isotp CAN sockets
*
* $Id: isotp.h 1038 2009-08-21 10:00:21Z hartkopp $
*
* Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
* Copyright (c) 2008 Volkswagen Group Electronic Research
* All rights reserved.
*
* Send feedback to <socketcan-users@lists.berlios.de>
*
*/
#ifndef CAN_ISOTP_H
#define CAN_ISOTP_H
#include <socketcan/can.h>
#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)
/* for socket options affecting the socket (not the global system) */
#define CAN_ISOTP_OPTS 1
#define CAN_ISOTP_RECV_FC 2
struct can_isotp_options {
__u32 flags; /* set flags for isotp behaviour. */
/* __u32 value : flags see below */
__u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */
/* __u32 value : time in nano secs */
__u8 ext_address; /* set address for extended addressing */
/* __u8 value : extended address */
__u8 txpad_content; /* set content of padding byte (tx) */
/* __u8 value : content on tx path */
__u8 rxpad_content; /* set content of padding byte (rx) */
/* __u8 value : content on rx path */
};
struct can_isotp_fc_options {
__u8 bs; /* blocksize provided in FC frame */
/* __u8 value : blocksize. 0 = off */
__u8 stmin; /* separation time provided in FC frame */
/* __u8 value : */
/* 0x00 - 0x7F : 0 - 127 ms */
/* 0x80 - 0xF0 : reserved */
/* 0xF1 - 0xF9 : 100 us - 900 us */
/* 0xFA - 0xFF : reserved */
__u8 wftmax; /* max. number of wait frame transmiss. */
/* __u8 value : 0 = omit FC N_PDU WT */
};
/* flags for isotp behaviour */
#define CAN_ISOTP_LISTEN_MODE 0x01 /* listen only (do not send FC) */
#define CAN_ISOTP_EXTEND_ADDR 0x02 /* enable extended addressing */
#define CAN_ISOTP_TX_PADDING 0x04 /* enable CAN frame padding tx path */
#define CAN_ISOTP_RX_PADDING 0x08 /* enable CAN frame padding rx path */
#define CAN_ISOTP_CHK_PAD_LEN 0x10 /* check received CAN frame padding */
#define CAN_ISOTP_CHK_PAD_DATA 0x20 /* check received CAN frame padding */
#define CAN_ISOTP_HALF_DUPLEX 0x40 /* half duplex error state handling */
/* default values */
#define CAN_ISOTP_DEFAULT_FLAGS 0
#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
#define CAN_ISOTP_DEFAULT_RXPAD_CONTENT 0x00
#define CAN_ISOTP_DEFAULT_TXPAD_CONTENT 0x00
#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0
#define CAN_ISOTP_DEFAULT_RECV_BS 0
#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0
/*
* Remark on CAN_ISOTP_DEFAULT_RECV_* values:
*
* We can strongly assume, that the Linux Kernel implementation of
* CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
* But as we like to be able to behave as a commonly available ECU,
* these default settings can be changed via sockopts.
* For that reason the STmin value is intentionally _not_ checked for
* consistency and copied directly into the flow control (FC) frame.
*
*/
#endif