/*
 * Copyright (C) 2014 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <asm/cpuidle.h>
#include <asm/fncpy.h>
#include <asm/mach/map.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/tlb.h>

#include "common.h"
#include "cpuidle.h"
#include "hardware.h"

#define MX6_MAX_MMDC_IO_NUM	19

#define PMU_LOW_PWR_CTRL	0x270
#define XTALOSC24M_OSC_CONFIG0	0x2a0
#define XTALOSC24M_OSC_CONFIG1	0x2b0
#define XTALOSC24M_OSC_CONFIG2	0x2c0
#define XTALOSC24M_OSC_CONFIG0_RC_OSC_PROG_CUR_SHIFT	24
#define XTALOSC24M_OSC_CONFIG0_HYST_MINUS_MASK		0xf
#define XTALOSC24M_OSC_CONFIG0_HYST_MINUS_SHIFT		16
#define XTALOSC24M_OSC_CONFIG0_HYST_PLUS_MASK		0xf
#define XTALOSC24M_OSC_CONFIG0_HYST_PLUS_SHIFT		12
#define XTALOSC24M_OSC_CONFIG0_RC_OSC_PROG_SHIFT	4
#define XTALOSC24M_OSC_CONFIG0_ENABLE_SHIFT		1
#define XTALOSC24M_OSC_CONFIG0_START_SHIFT		0
#define XTALOSC24M_OSC_CONFIG1_COUNT_RC_CUR_SHIFT	20
#define XTALOSC24M_OSC_CONFIG1_COUNT_RC_TRG_SHIFT	0
#define XTALOSC24M_OSC_CONFIG2_COUNT_1M_TRG_MASK	0xfff
#define XTALOSC24M_OSC_CONFIG2_COUNT_1M_TRG_SHIFT	0

static void __iomem *wfi_iram_base;
static void __iomem *wfi_iram_base_phys;
extern unsigned long iram_tlb_phys_addr;
extern unsigned long mx6sx_lpm_wfi_start asm("mx6sx_lpm_wfi_start");
extern unsigned long mx6sx_lpm_wfi_end asm("mx6sx_lpm_wfi_end");
extern u32 low_bus_freq_mode;

struct imx6_pm_base {
	phys_addr_t pbase;
	void __iomem *vbase;
};

static const u32 imx6sx_mmdc_io_offset[] __initconst = {
	0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
	0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
	0x60c, 0x610, 0x61c, 0x620, /* B0DS ~ B3DS */
	0x5f8, 0x608, 0x310, 0x314, /* CTL, MODE, SODT0, SODT1 */
	0x300, 0x2fc, 0x32c,	    /* CAS, RAS, SDCLK_0 */
};

struct imx6_cpuidle_pm_info {
	phys_addr_t pbase; /* The physical address of pm_info. */
	phys_addr_t resume_addr; /* The physical resume address for asm code */
	u32 pm_info_size; /* Size of pm_info. */
	u32 ttbr;
	struct imx6_pm_base mmdc_base;
	struct imx6_pm_base iomuxc_base;
	struct imx6_pm_base ccm_base;
	struct imx6_pm_base gpc_base;
	struct imx6_pm_base l2_base;
	struct imx6_pm_base anatop_base;
	struct imx6_pm_base src_base;
	struct imx6_pm_base sema4_base;
	u32 saved_diagnostic; /* To save disagnostic register */
	u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);

static void (*imx6sx_wfi_in_iram_fn)(void __iomem *iram_vbase);

static int imx6_idle_finish(unsigned long val)
{
	imx6sx_wfi_in_iram_fn(wfi_iram_base);

	return 0;
}

static int imx6sx_enter_wait(struct cpuidle_device *dev,
			    struct cpuidle_driver *drv, int index)
{
	imx6q_set_lpm(WAIT_UNCLOCKED);
	if ((index == 1) || (!low_bus_freq_mode && index == 2)) {
		cpu_do_idle();
	} else {
			/* Need to notify there is a cpu pm operation. */
			cpu_pm_enter();
			cpu_cluster_pm_enter();

			cpu_suspend(0, imx6_idle_finish);

			cpu_cluster_pm_exit();
			cpu_pm_exit();
			imx6q_enable_rbc(false);
	}

	imx6q_set_lpm(WAIT_CLOCKED);

	return index;
}

static struct cpuidle_driver imx6sx_cpuidle_driver = {
	.name = "imx6sx_cpuidle",
	.owner = THIS_MODULE,
	.states = {
		/* WFI */
		ARM_CPUIDLE_WFI_STATE,
		/* WAIT MODE */
		{
			.exit_latency = 50,
			.target_residency = 75,
			.flags = CPUIDLE_FLAG_TIME_VALID,
			.enter = imx6sx_enter_wait,
			.name = "WAIT",
			.desc = "Clock off",
		},
		/* LOW POWER IDLE */
		{
			/*
			 * RBC 31us + ARM gating 93us + RBC clear 65us
			 * + PLL2 relock 450us and some margin, here set
			 * it to 650us.
			 */
			.exit_latency = 650,
			.target_residency = 1000,
			.flags = CPUIDLE_FLAG_TIME_VALID,
			.enter = imx6sx_enter_wait,
			.name = "LOW-POWER-IDLE",
			.desc = "ARM power off",
		},

	},
	.state_count = 3,
	.safe_state_index = 0,
};

int __init imx6sx_cpuidle_init(void)
{
	struct imx6_cpuidle_pm_info *cpuidle_pm_info;
	int i;
	const u32 *mmdc_offset_array;
	u32 wfi_code_size, val;

	wfi_iram_base_phys = (void *)(iram_tlb_phys_addr + MX6_CPUIDLE_IRAM_ADDR_OFFSET);

	/* Make sure wfi_iram_base is 8 byte aligned. */
	if ((uintptr_t)(wfi_iram_base_phys) & (FNCPY_ALIGN - 1))
		wfi_iram_base_phys += FNCPY_ALIGN - ((uintptr_t)wfi_iram_base_phys % (FNCPY_ALIGN));

	wfi_iram_base = (void *)IMX_IO_P2V((unsigned long) wfi_iram_base_phys);

	cpuidle_pm_info = wfi_iram_base;
	cpuidle_pm_info->pbase = (phys_addr_t) wfi_iram_base_phys;
	cpuidle_pm_info->pm_info_size = sizeof(*cpuidle_pm_info);
	cpuidle_pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
	cpuidle_pm_info->mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset);
	mmdc_offset_array = imx6sx_mmdc_io_offset;

	cpuidle_pm_info->mmdc_base.pbase = MX6Q_MMDC_P0_BASE_ADDR;
	cpuidle_pm_info->mmdc_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_MMDC_P0_BASE_ADDR);

	cpuidle_pm_info->ccm_base.pbase = MX6Q_CCM_BASE_ADDR;
	cpuidle_pm_info->ccm_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_CCM_BASE_ADDR);

	cpuidle_pm_info->anatop_base.pbase = MX6Q_ANATOP_BASE_ADDR;
	cpuidle_pm_info->anatop_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_ANATOP_BASE_ADDR);

	cpuidle_pm_info->gpc_base.pbase = MX6Q_GPC_BASE_ADDR;
	cpuidle_pm_info->gpc_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_GPC_BASE_ADDR);

	cpuidle_pm_info->iomuxc_base.pbase = MX6Q_IOMUXC_BASE_ADDR;
	cpuidle_pm_info->iomuxc_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_IOMUXC_BASE_ADDR);

	cpuidle_pm_info->l2_base.pbase = MX6Q_L2_BASE_ADDR;
	cpuidle_pm_info->l2_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_L2_BASE_ADDR);

	cpuidle_pm_info->src_base.pbase = MX6Q_SRC_BASE_ADDR;
	cpuidle_pm_info->src_base.vbase = (void __iomem *)IMX_IO_P2V(MX6Q_SRC_BASE_ADDR);

	cpuidle_pm_info->sema4_base.pbase = MX6Q_SEMA4_BASE_ADDR;
	cpuidle_pm_info->sema4_base.vbase =
		(void __iomem *)IMX_IO_P2V(MX6Q_SEMA4_BASE_ADDR);

	/* only save mmdc io offset, settings will be saved in asm code */
	for (i = 0; i < cpuidle_pm_info->mmdc_io_num; i++)
		cpuidle_pm_info->mmdc_io_val[i][0] = mmdc_offset_array[i];

	/* code size should include cpuidle_pm_info size */
	wfi_code_size = (&mx6sx_lpm_wfi_end -&mx6sx_lpm_wfi_start) *4 + sizeof(*cpuidle_pm_info);
	imx6sx_wfi_in_iram_fn = (void *)fncpy(wfi_iram_base + sizeof(*cpuidle_pm_info),
		&imx6sx_low_power_idle, wfi_code_size);

	imx6q_set_int_mem_clk_lpm(true);

	if (imx_get_soc_revision() >= IMX_CHIP_REVISION_1_2) {
		/*
		 * enable RC-OSC here, as it needs at least 4ms for RC-OSC to
		 * be stable, low power idle flow can NOT endure this big
		 * latency, so we make RC-OSC self-tuning enabled here.
		 */
		val = readl_relaxed(cpuidle_pm_info->anatop_base.vbase +
			PMU_LOW_PWR_CTRL);
		val |= 0x1;
		writel_relaxed(val, cpuidle_pm_info->anatop_base.vbase +
			PMU_LOW_PWR_CTRL);
		/*
		 * config RC-OSC freq
		 * tune_enable = 1;tune_start = 1;hyst_plus = 0;hyst_minus = 0;
		 * osc_prog = 0xa7;
		 */
		writel_relaxed(
			0x4 << XTALOSC24M_OSC_CONFIG0_RC_OSC_PROG_CUR_SHIFT |
			0xa7 << XTALOSC24M_OSC_CONFIG0_RC_OSC_PROG_SHIFT |
			0x1 << XTALOSC24M_OSC_CONFIG0_ENABLE_SHIFT |
			0x1 << XTALOSC24M_OSC_CONFIG0_START_SHIFT,
			cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG0);
		/* set count_trg = 0x2dc */
		writel_relaxed(
			0x40 << XTALOSC24M_OSC_CONFIG1_COUNT_RC_CUR_SHIFT |
			0x2dc << XTALOSC24M_OSC_CONFIG1_COUNT_RC_TRG_SHIFT,
			cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG1);
		/* wait 4ms according to hardware design */
		msleep(4);
		/*
		 * now add some hysteresis, hyst_plus=3, hyst_minus=3
		 * (the minimum hysteresis that looks good is 2)
		 */
		val = readl_relaxed(cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG0);
		val &= ~((XTALOSC24M_OSC_CONFIG0_HYST_MINUS_MASK <<
			XTALOSC24M_OSC_CONFIG0_HYST_MINUS_SHIFT) |
			(XTALOSC24M_OSC_CONFIG0_HYST_PLUS_MASK <<
			XTALOSC24M_OSC_CONFIG0_HYST_PLUS_SHIFT));
		val |= (0x3 << XTALOSC24M_OSC_CONFIG0_HYST_MINUS_SHIFT) |
			(0x3 << XTALOSC24M_OSC_CONFIG0_HYST_PLUS_SHIFT);
		writel_relaxed(val, cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG0);
		/* set the count_1m_trg = 0x2d7 */
		val = readl_relaxed(cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG2);
		val &= ~(XTALOSC24M_OSC_CONFIG2_COUNT_1M_TRG_MASK <<
			XTALOSC24M_OSC_CONFIG2_COUNT_1M_TRG_SHIFT);
		val |= 0x2d7 << XTALOSC24M_OSC_CONFIG2_COUNT_1M_TRG_SHIFT;
		writel_relaxed(val, cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG2);
		/*
		 * hardware design require to write XTALOSC24M_OSC_CONFIG0 or
		 * XTALOSC24M_OSC_CONFIG1 to
		 * make XTALOSC24M_OSC_CONFIG2 write work
		 */
		val = readl_relaxed(cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG1);
		writel_relaxed(val, cpuidle_pm_info->anatop_base.vbase +
			XTALOSC24M_OSC_CONFIG1);
	}

	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);
}