x1205.c
4.05 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
/*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* based on a the Linux rtc-x1207.c driver which is:
* Copyright 2004 Karen Spearel
* Copyright 2005 Alessandro Zummo
*
* Information and datasheet:
* http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Date & Time support for Xicor/Intersil X1205 RTC
*/
/* #define DEBUG */
#include <common.h>
#include <command.h>
#include <rtc.h>
#include <i2c.h>
#if defined(CONFIG_CMD_DATE)
#define CCR_SEC 0
#define CCR_MIN 1
#define CCR_HOUR 2
#define CCR_MDAY 3
#define CCR_MONTH 4
#define CCR_YEAR 5
#define CCR_WDAY 6
#define CCR_Y2K 7
#define X1205_REG_SR 0x3F /* status register */
#define X1205_REG_Y2K 0x37
#define X1205_REG_DW 0x36
#define X1205_REG_YR 0x35
#define X1205_REG_MO 0x34
#define X1205_REG_DT 0x33
#define X1205_REG_HR 0x32
#define X1205_REG_MN 0x31
#define X1205_REG_SC 0x30
#define X1205_REG_DTR 0x13
#define X1205_REG_ATR 0x12
#define X1205_REG_INT 0x11
#define X1205_REG_0 0x10
#define X1205_REG_Y2K1 0x0F
#define X1205_REG_DWA1 0x0E
#define X1205_REG_YRA1 0x0D
#define X1205_REG_MOA1 0x0C
#define X1205_REG_DTA1 0x0B
#define X1205_REG_HRA1 0x0A
#define X1205_REG_MNA1 0x09
#define X1205_REG_SCA1 0x08
#define X1205_REG_Y2K0 0x07
#define X1205_REG_DWA0 0x06
#define X1205_REG_YRA0 0x05
#define X1205_REG_MOA0 0x04
#define X1205_REG_DTA0 0x03
#define X1205_REG_HRA0 0x02
#define X1205_REG_MNA0 0x01
#define X1205_REG_SCA0 0x00
#define X1205_CCR_BASE 0x30 /* Base address of CCR */
#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
#define X1205_SR_RTCF 0x01 /* Clock failure */
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
#define X1205_DTR_DTR0 0x01
#define X1205_DTR_DTR1 0x02
#define X1205_DTR_DTR2 0x04
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
static void rtc_write(int reg, u8 val)
{
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1);
}
/*
* In the routines that deal directly with the x1205 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
* Epoch is initialized as 2000. Time is set to UTC.
*/
int rtc_get(struct rtc_time *tm)
{
u8 buf[8];
i2c_read(CONFIG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
__FUNCTION__,
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
tm->tm_sec = bcd2bin(buf[CCR_SEC]);
tm->tm_min = bcd2bin(buf[CCR_MIN]);
tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
tm->tm_mon = bcd2bin(buf[CCR_MONTH]); /* mon is 0-11 */
tm->tm_year = bcd2bin(buf[CCR_YEAR])
+ (bcd2bin(buf[CCR_Y2K]) * 100);
tm->tm_wday = buf[CCR_WDAY];
debug("%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__FUNCTION__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
return 0;
}
int rtc_set(struct rtc_time *tm)
{
int i;
u8 buf[8];
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
buf[CCR_SEC] = bin2bcd(tm->tm_sec);
buf[CCR_MIN] = bin2bcd(tm->tm_min);
/* set hour and 24hr bit */
buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
/* month, 1 - 12 */
buf[CCR_MONTH] = bin2bcd(tm->tm_mon);
/* year, since the rtc epoch*/
buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
buf[CCR_WDAY] = tm->tm_wday & 0x07;
buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100);
/* this sequence is required to unlock the chip */
rtc_write(X1205_REG_SR, X1205_SR_WEL);
rtc_write(X1205_REG_SR, X1205_SR_WEL | X1205_SR_RWEL);
/* write register's data */
for (i = 0; i < 8; i++)
rtc_write(X1205_CCR_BASE + i, buf[i]);
rtc_write(X1205_REG_SR, 0);
return 0;
}
void rtc_reset(void)
{
/*
* Nothing to do
*/
}
#endif