/*
 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * EXYNOS - CPU frequency scaling support for EXYNOS series
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>

#include <plat/cpu.h>

#include "exynos-cpufreq.h"

static struct exynos_dvfs_info *exynos_info;

static struct regulator *arm_regulator;

static unsigned int locking_frequency;
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);

static int exynos_cpufreq_get_index(unsigned int freq)
{
	struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
	int index;

	for (index = 0;
		freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
		if (freq_table[index].frequency == freq)
			break;

	if (freq_table[index].frequency == CPUFREQ_TABLE_END)
		return -EINVAL;

	return index;
}

static int exynos_cpufreq_scale(unsigned int target_freq)
{
	struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
	unsigned int *volt_table = exynos_info->volt_table;
	struct cpufreq_policy *policy = cpufreq_cpu_get(0);
	unsigned int arm_volt, safe_arm_volt = 0;
	unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
	unsigned int old_freq;
	int index, old_index;
	int ret = 0;

	old_freq = policy->cur;

	/*
	 * The policy max have been changed so that we cannot get proper
	 * old_index with cpufreq_frequency_table_target(). Thus, ignore
	 * policy and get the index from the raw frequency table.
	 */
	old_index = exynos_cpufreq_get_index(old_freq);
	if (old_index < 0) {
		ret = old_index;
		goto out;
	}

	index = exynos_cpufreq_get_index(target_freq);
	if (index < 0) {
		ret = index;
		goto out;
	}

	/*
	 * ARM clock source will be changed APLL to MPLL temporary
	 * To support this level, need to control regulator for
	 * required voltage level
	 */
	if (exynos_info->need_apll_change != NULL) {
		if (exynos_info->need_apll_change(old_index, index) &&
		   (freq_table[index].frequency < mpll_freq_khz) &&
		   (freq_table[old_index].frequency < mpll_freq_khz))
			safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
	}
	arm_volt = volt_table[index];

	/* When the new frequency is higher than current frequency */
	if ((target_freq > old_freq) && !safe_arm_volt) {
		/* Firstly, voltage up to increase frequency */
		ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
		if (ret) {
			pr_err("%s: failed to set cpu voltage to %d\n",
				__func__, arm_volt);
			return ret;
		}
	}

	if (safe_arm_volt) {
		ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
				      safe_arm_volt);
		if (ret) {
			pr_err("%s: failed to set cpu voltage to %d\n",
				__func__, safe_arm_volt);
			return ret;
		}
	}

	exynos_info->set_freq(old_index, index);

	/* When the new frequency is lower than current frequency */
	if ((target_freq < old_freq) ||
	   ((target_freq > old_freq) && safe_arm_volt)) {
		/* down the voltage after frequency change */
		ret = regulator_set_voltage(arm_regulator, arm_volt,
				arm_volt);
		if (ret) {
			pr_err("%s: failed to set cpu voltage to %d\n",
				__func__, arm_volt);
			goto out;
		}
	}

out:
	cpufreq_cpu_put(policy);

	return ret;
}

static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
{
	struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
	int ret = 0;

	mutex_lock(&cpufreq_lock);

	if (frequency_locked)
		goto out;

	ret = exynos_cpufreq_scale(freq_table[index].frequency);

out:
	mutex_unlock(&cpufreq_lock);

	return ret;
}

#ifdef CONFIG_PM
static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
{
	return 0;
}

static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
{
	return 0;
}
#endif

/**
 * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
 *			context
 * @notifier
 * @pm_event
 * @v
 *
 * While frequency_locked == true, target() ignores every frequency but
 * locking_frequency. The locking_frequency value is the initial frequency,
 * which is set by the bootloader. In order to eliminate possible
 * inconsistency in clock values, we save and restore frequencies during
 * suspend and resume and block CPUFREQ activities. Note that the standard
 * suspend/resume cannot be used as they are too deep (syscore_ops) for
 * regulator actions.
 */
static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
				       unsigned long pm_event, void *v)
{
	int ret;

	switch (pm_event) {
	case PM_SUSPEND_PREPARE:
		mutex_lock(&cpufreq_lock);
		frequency_locked = true;
		mutex_unlock(&cpufreq_lock);

		ret = exynos_cpufreq_scale(locking_frequency);
		if (ret < 0)
			return NOTIFY_BAD;

		break;

	case PM_POST_SUSPEND:
		mutex_lock(&cpufreq_lock);
		frequency_locked = false;
		mutex_unlock(&cpufreq_lock);
		break;
	}

	return NOTIFY_OK;
}

static struct notifier_block exynos_cpufreq_nb = {
	.notifier_call = exynos_cpufreq_pm_notifier,
};

static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
	policy->clk = exynos_info->cpu_clk;
	return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
}

static struct cpufreq_driver exynos_driver = {
	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
	.verify		= cpufreq_generic_frequency_table_verify,
	.target_index	= exynos_target,
	.get		= cpufreq_generic_get,
	.init		= exynos_cpufreq_cpu_init,
	.exit		= cpufreq_generic_exit,
	.name		= "exynos_cpufreq",
	.attr		= cpufreq_generic_attr,
#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
	.boost_supported = true,
#endif
#ifdef CONFIG_PM
	.suspend	= exynos_cpufreq_suspend,
	.resume		= exynos_cpufreq_resume,
#endif
};

static int exynos_cpufreq_probe(struct platform_device *pdev)
{
	int ret = -EINVAL;

	exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
	if (!exynos_info)
		return -ENOMEM;

	if (soc_is_exynos4210())
		ret = exynos4210_cpufreq_init(exynos_info);
	else if (soc_is_exynos4212() || soc_is_exynos4412())
		ret = exynos4x12_cpufreq_init(exynos_info);
	else if (soc_is_exynos5250())
		ret = exynos5250_cpufreq_init(exynos_info);
	else
		return 0;

	if (ret)
		goto err_vdd_arm;

	if (exynos_info->set_freq == NULL) {
		pr_err("%s: No set_freq function (ERR)\n", __func__);
		goto err_vdd_arm;
	}

	arm_regulator = regulator_get(NULL, "vdd_arm");
	if (IS_ERR(arm_regulator)) {
		pr_err("%s: failed to get resource vdd_arm\n", __func__);
		goto err_vdd_arm;
	}

	locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;

	register_pm_notifier(&exynos_cpufreq_nb);

	if (cpufreq_register_driver(&exynos_driver)) {
		pr_err("%s: failed to register cpufreq driver\n", __func__);
		goto err_cpufreq;
	}

	return 0;
err_cpufreq:
	unregister_pm_notifier(&exynos_cpufreq_nb);

	regulator_put(arm_regulator);
err_vdd_arm:
	kfree(exynos_info);
	return -EINVAL;
}

static struct platform_driver exynos_cpufreq_platdrv = {
	.driver = {
		.name	= "exynos-cpufreq",
		.owner	= THIS_MODULE,
	},
	.probe = exynos_cpufreq_probe,
};
module_platform_driver(exynos_cpufreq_platdrv);