bf609-ezkit.c
1.38 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
/*
* U-boot - main board file
*
* Copyright (c) 2008-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <netdev.h>
#include <asm/blackfin.h>
#include <asm/io.h>
#include <asm/sdh.h>
#include <asm/portmux.h>
#include "soft_switch.h"
int checkboard(void)
{
printf("Board: ADI BF609 EZ-Kit board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
}
int board_early_init_f(void)
{
static const unsigned short pins[] = {
P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
};
peripheral_request_list(pins, "smc0");
return 0;
}
#ifdef CONFIG_DESIGNWARE_ETH
int board_eth_init(bd_t *bis)
{
int ret = 0;
if (CONFIG_DW_PORTS & 1) {
static const unsigned short pins[] = P_RMII0;
if (!peripheral_request_list(pins, "emac0"))
ret += designware_initialize(EMAC0_MACCFG, 0);
}
if (CONFIG_DW_PORTS & 2) {
static const unsigned short pins[] = P_RMII1;
if (!peripheral_request_list(pins, "emac1"))
ret += designware_initialize(EMAC1_MACCFG, 0);
}
return ret;
}
#endif
#ifdef CONFIG_BFIN_SDH
int board_mmc_init(bd_t *bis)
{
return bfin_mmc_init(bis);
}
#endif
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
printf("other init\n");
return setup_board_switches();
}