/*
 * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block
 *
 * Created by:	Nicolas Pitre, May 2012
 * Copyright:	(C) 2012-2013  Linaro Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/of_address.h>
#include <linux/vexpress.h>
#include <linux/arm-cci.h>

#include <asm/mcpm.h>
#include <asm/proc-fns.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/cp15.h>


#define RST_HOLD0	0x0
#define RST_HOLD1	0x4
#define SYS_SWRESET	0x8
#define RST_STAT0	0xc
#define RST_STAT1	0x10
#define EAG_CFG_R	0x20
#define EAG_CFG_W	0x24
#define KFC_CFG_R	0x28
#define KFC_CFG_W	0x2c
#define DCS_CFG_R	0x30

/*
 * We can't use regular spinlocks. In the switcher case, it is possible
 * for an outbound CPU to call power_down() while its inbound counterpart
 * is already live using the same logical CPU number which trips lockdep
 * debugging.
 */
static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED;

static void __iomem *dcscb_base;
static int dcscb_use_count[4][2];
static int dcscb_allcpus_mask[2];

static int dcscb_power_up(unsigned int cpu, unsigned int cluster)
{
	unsigned int rst_hold, cpumask = (1 << cpu);
	unsigned int all_mask = dcscb_allcpus_mask[cluster];

	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
	if (cpu >= 4 || cluster >= 2)
		return -EINVAL;

	/*
	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
	 * variant exists, we need to disable IRQs manually here.
	 */
	local_irq_disable();
	arch_spin_lock(&dcscb_lock);

	dcscb_use_count[cpu][cluster]++;
	if (dcscb_use_count[cpu][cluster] == 1) {
		rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
		if (rst_hold & (1 << 8)) {
			/* remove cluster reset and add individual CPU's reset */
			rst_hold &= ~(1 << 8);
			rst_hold |= all_mask;
		}
		rst_hold &= ~(cpumask | (cpumask << 4));
		writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
	} else if (dcscb_use_count[cpu][cluster] != 2) {
		/*
		 * The only possible values are:
		 * 0 = CPU down
		 * 1 = CPU (still) up
		 * 2 = CPU requested to be up before it had a chance
		 *     to actually make itself down.
		 * Any other value is a bug.
		 */
		BUG();
	}

	arch_spin_unlock(&dcscb_lock);
	local_irq_enable();

	return 0;
}

static void dcscb_power_down(void)
{
	unsigned int mpidr, cpu, cluster, rst_hold, cpumask, all_mask;
	bool last_man = false, skip_wfi = false;

	mpidr = read_cpuid_mpidr();
	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
	cpumask = (1 << cpu);
	all_mask = dcscb_allcpus_mask[cluster];

	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
	BUG_ON(cpu >= 4 || cluster >= 2);

	__mcpm_cpu_going_down(cpu, cluster);

	arch_spin_lock(&dcscb_lock);
	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
	dcscb_use_count[cpu][cluster]--;
	if (dcscb_use_count[cpu][cluster] == 0) {
		rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
		rst_hold |= cpumask;
		if (((rst_hold | (rst_hold >> 4)) & all_mask) == all_mask) {
			rst_hold |= (1 << 8);
			last_man = true;
		}
		writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
	} else if (dcscb_use_count[cpu][cluster] == 1) {
		/*
		 * A power_up request went ahead of us.
		 * Even if we do not want to shut this CPU down,
		 * the caller expects a certain state as if the WFI
		 * was aborted.  So let's continue with cache cleaning.
		 */
		skip_wfi = true;
	} else
		BUG();

	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
		arch_spin_unlock(&dcscb_lock);

		/* Flush all cache levels for this cluster. */
		v7_exit_coherency_flush(all);

		/*
		 * This is a harmless no-op.  On platforms with a real
		 * outer cache this might either be needed or not,
		 * depending on where the outer cache sits.
		 */
		outer_flush_all();

		/*
		 * Disable cluster-level coherency by masking
		 * incoming snoops and DVM messages:
		 */
		cci_disable_port_by_cpu(mpidr);

		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
	} else {
		arch_spin_unlock(&dcscb_lock);

		/* Disable and flush the local CPU cache. */
		v7_exit_coherency_flush(louis);
	}

	__mcpm_cpu_down(cpu, cluster);

	/* Now we are prepared for power-down, do it: */
	dsb();
	if (!skip_wfi)
		wfi();

	/* Not dead at this point?  Let our caller cope. */
}

static const struct mcpm_platform_ops dcscb_power_ops = {
	.power_up	= dcscb_power_up,
	.power_down	= dcscb_power_down,
};

static void __init dcscb_usage_count_init(void)
{
	unsigned int mpidr, cpu, cluster;

	mpidr = read_cpuid_mpidr();
	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);

	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
	BUG_ON(cpu >= 4 || cluster >= 2);
	dcscb_use_count[cpu][cluster] = 1;
}

extern void dcscb_power_up_setup(unsigned int affinity_level);

static int __init dcscb_init(void)
{
	struct device_node *node;
	unsigned int cfg;
	int ret;

	if (!cci_probed())
		return -ENODEV;

	node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb");
	if (!node)
		return -ENODEV;
	dcscb_base = of_iomap(node, 0);
	if (!dcscb_base)
		return -EADDRNOTAVAIL;
	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
	dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1;
	dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1;
	dcscb_usage_count_init();

	ret = mcpm_platform_register(&dcscb_power_ops);
	if (!ret)
		ret = mcpm_sync_init(dcscb_power_up_setup);
	if (ret) {
		iounmap(dcscb_base);
		return ret;
	}

	pr_info("VExpress DCSCB support installed\n");

	/*
	 * Future entries into the kernel can now go
	 * through the cluster entry vectors.
	 */
	vexpress_flags_set(virt_to_phys(mcpm_entry_point));

	return 0;
}

early_initcall(dcscb_init);