Blame view

kernel/linux-rt-4.4.41/arch/arm/boot/dts/dra7x-evm-lcd-auo-g101evn01.0.dtsi 2.22 KB
5113f6f70   김현기   kernel add
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
  /*
   * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
   *
   * Display panel details:
   * The base display is Apollo UP-02-096.
   * http://store.apollodisplays.com/store/Resources/en/ItemDocuments/UP_02_096/UP-02-096_Datasheet.pdf
   */
  
  / {
  	aliases {
  		display0 = &lcd;
  		display1 = &hdmi0;
  	};
  
  	backlight {
  		compatible = "led-backlight";
  		leds = <&backlight_led>;
  		brightness-levels = <0 2 38 74 110 146 182 218 255>;
  		default-brightness-level = <8>;
  
  		enable-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>;
  	};
  
  	lcd: display {
  		compatible = "auo,g101evn01.0", "panel-dpi";
  
  		enable-gpios = <&pcf_lcd 13 GPIO_ACTIVE_LOW>; /* P15, CON_LCD_PWR_DN */
  
  		label = "lcd";
  
  		panel-timing {
  			clock-frequency = <68930000>;
  			hactive = <1280>;
  			vactive = <800>;
  
  			hfront-porch = <48>;
  			hsync-len = <32>;
  			hback-porch = <48>;
  
  			vfront-porch = <4>;
  			vsync-len = <4>;
  			vback-porch = <8>;
  
  			hsync-active = <0>;
  			vsync-active = <0>;
  			de-active = <1>;
  			pixelclk-active = <1>;
  		};
  
  		port {
  			lcd_in: endpoint {
  				remote-endpoint = <&dpi_out>;
  			};
  		};
  	};
  };
  
  &i2c1 {
  	pcf_display_board: gpio@27 {
  		compatible = "nxp,pcf8575";
  		reg = <0x27>;
  		gpio-controller;
  		#gpio-cells = <2>;
  	};
  
  	touchscreen: goodix-gt9271@14 {
  		status = "okay";
  		compatible = "goodix,gt9271";
  		reg = <0x14>;
  
  		interrupt-parent = <&gpio1>;
  		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
  		touchscreen-size-x = <1280>;
  		touchscreen-size-y = <800>;
  		touchscreen-inverted-y;
  
  		/* Reset gpio line is inverted before going to touch panel */
  		reset-gpios = <&pcf_display_board 5 GPIO_ACTIVE_LOW>;
  		irq-gpios = <&pcf_display_board 6 GPIO_ACTIVE_HIGH>;
  	};
  
  	/* TLC chip for LCD panel power and backlight */
  	tlc59108@40 {
  		#address-cells = <1>;
  		#size-cells = <0>;
  		compatible = "ti,tlc59108";
  		reg = <0x40>;
  
  		backlight_led: bl@2 {
  			label = "backlight";
  			reg = <0x2>;
  		};
  	};
  };
  
  &dss {
  	ports {
  		#address-cells = <1>;
  		#size-cells = <0>;
  
  		dss_port: port {
  			dpi_out: endpoint {
  				remote-endpoint = <&lcd_in>;
  				data-lines = <24>;
  			};
  		};
  	};
  };