Blame view

kernel/linux-rt-4.4.41/include/linux/rtc/ds1685.h 13.9 KB
5113f6f70   김현기   kernel add
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
  /*
   * Definitions for the registers, addresses, and platform data of the
   * DS1685/DS1687-series RTC chips.
   *
   * This Driver also works for the DS17X85/DS17X87 RTC chips.  Functionally
   * similar to the DS1685/DS1687, they support a few extra features which
   * include larger, battery-backed NV-SRAM, burst-mode access, and an RTC
   * write counter.
   *
   * Copyright (C) 2011-2014 Joshua Kinard <kumba@gentoo.org>.
   * Copyright (C) 2009 Matthias Fuchs <matthias.fuchs@esd-electronics.com>.
   *
   * References:
   *    DS1685/DS1687 3V/5V Real-Time Clocks, 19-5215, Rev 4/10.
   *    DS17x85/DS17x87 3V/5V Real-Time Clocks, 19-5222, Rev 4/10.
   *    DS1689/DS1693 3V/5V Serialized Real-Time Clocks, Rev 112105.
   *    Application Note 90, Using the Multiplex Bus RTC Extended Features.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
   */
  
  #ifndef _LINUX_RTC_DS1685_H_
  #define _LINUX_RTC_DS1685_H_
  
  #include <linux/rtc.h>
  #include <linux/platform_device.h>
  #include <linux/workqueue.h>
  
  /**
   * struct ds1685_priv - DS1685 private data structure.
   * @dev: pointer to the rtc_device structure.
   * @regs: iomapped base address pointer of the RTC registers.
   * @regstep: padding/step size between registers (optional).
   * @baseaddr: base address of the RTC device.
   * @size: resource size.
   * @lock: private lock variable for spin locking/unlocking.
   * @work: private workqueue.
   * @irq: IRQ number assigned to the RTC device.
   * @prepare_poweroff: pointer to platform pre-poweroff function.
   * @wake_alarm: pointer to platform wake alarm function.
   * @post_ram_clear: pointer to platform post ram-clear function.
   */
  struct ds1685_priv {
  	struct rtc_device *dev;
  	void __iomem *regs;
  	u32 regstep;
  	resource_size_t baseaddr;
  	size_t size;
  	spinlock_t lock;
  	struct work_struct work;
  	int irq_num;
  	bool bcd_mode;
  	bool no_irq;
  	bool uie_unsupported;
  	bool alloc_io_resources;
  	u8 (*read)(struct ds1685_priv *, int);
  	void (*write)(struct ds1685_priv *, int, u8);
  	void (*prepare_poweroff)(void);
  	void (*wake_alarm)(void);
  	void (*post_ram_clear)(void);
  };
  
  
  /**
   * struct ds1685_rtc_platform_data - platform data structure.
   * @plat_prepare_poweroff: platform-specific pre-poweroff function.
   * @plat_wake_alarm: platform-specific wake alarm function.
   * @plat_post_ram_clear: platform-specific post ram-clear function.
   *
   * If your platform needs to use a custom padding/step size between
   * registers, or uses one or more of the extended interrupts and needs special
   * handling, then include this header file in your platform definition and
   * set regstep and the plat_* pointers as appropriate.
   */
  struct ds1685_rtc_platform_data {
  	const u32 regstep;
  	const bool bcd_mode;
  	const bool no_irq;
  	const bool uie_unsupported;
  	const bool alloc_io_resources;
  	u8 (*plat_read)(struct ds1685_priv *, int);
  	void (*plat_write)(struct ds1685_priv *, int, u8);
  	void (*plat_prepare_poweroff)(void);
  	void (*plat_wake_alarm)(void);
  	void (*plat_post_ram_clear)(void);
  };
  
  
  /*
   * Time Registers.
   */
  #define RTC_SECS		0x00	/* Seconds 00-59 */
  #define RTC_SECS_ALARM		0x01	/* Alarm Seconds 00-59 */
  #define RTC_MINS		0x02	/* Minutes 00-59 */
  #define RTC_MINS_ALARM		0x03	/* Alarm Minutes 00-59 */
  #define RTC_HRS			0x04	/* Hours 01-12 AM/PM || 00-23 */
  #define RTC_HRS_ALARM		0x05	/* Alarm Hours 01-12 AM/PM || 00-23 */
  #define RTC_WDAY		0x06	/* Day of Week 01-07 */
  #define RTC_MDAY		0x07	/* Day of Month 01-31 */
  #define RTC_MONTH		0x08	/* Month 01-12 */
  #define RTC_YEAR		0x09	/* Year 00-99 */
  #define RTC_CENTURY		0x48	/* Century 00-99 */
  #define RTC_MDAY_ALARM		0x49	/* Alarm Day of Month 01-31 */
  
  
  /*
   * Bit masks for the Time registers in BCD Mode (DM = 0).
   */
  #define RTC_SECS_BCD_MASK	0x7f	/* - x x x x x x x */
  #define RTC_MINS_BCD_MASK	0x7f	/* - x x x x x x x */
  #define RTC_HRS_12_BCD_MASK	0x1f	/* - - - x x x x x */
  #define RTC_HRS_24_BCD_MASK	0x3f	/* - - x x x x x x */
  #define RTC_MDAY_BCD_MASK	0x3f	/* - - x x x x x x */
  #define RTC_MONTH_BCD_MASK	0x1f	/* - - - x x x x x */
  #define RTC_YEAR_BCD_MASK	0xff	/* x x x x x x x x */
  
  /*
   * Bit masks for the Time registers in BIN Mode (DM = 1).
   */
  #define RTC_SECS_BIN_MASK	0x3f	/* - - x x x x x x */
  #define RTC_MINS_BIN_MASK	0x3f	/* - - x x x x x x */
  #define RTC_HRS_12_BIN_MASK	0x0f	/* - - - - x x x x */
  #define RTC_HRS_24_BIN_MASK	0x1f	/* - - - x x x x x */
  #define RTC_MDAY_BIN_MASK	0x1f	/* - - - x x x x x */
  #define RTC_MONTH_BIN_MASK	0x0f	/* - - - - x x x x */
  #define RTC_YEAR_BIN_MASK	0x7f	/* - x x x x x x x */
  
  /*
   * Bit masks common for the Time registers in BCD or BIN Mode.
   */
  #define RTC_WDAY_MASK		0x07	/* - - - - - x x x */
  #define RTC_CENTURY_MASK	0xff	/* x x x x x x x x */
  #define RTC_MDAY_ALARM_MASK	0xff	/* x x x x x x x x */
  #define RTC_HRS_AMPM_MASK	BIT(7)	/* Mask for the AM/PM bit */
  
  
  
  /*
   * Control Registers.
   */
  #define RTC_CTRL_A		0x0a	/* Control Register A */
  #define RTC_CTRL_B		0x0b	/* Control Register B */
  #define RTC_CTRL_C		0x0c	/* Control Register C */
  #define RTC_CTRL_D		0x0d	/* Control Register D */
  #define RTC_EXT_CTRL_4A		0x4a	/* Extended Control Register 4A */
  #define RTC_EXT_CTRL_4B		0x4b	/* Extended Control Register 4B */
  
  
  /*
   * Bit names in Control Register A.
   */
  #define RTC_CTRL_A_UIP		BIT(7)	/* Update In Progress */
  #define RTC_CTRL_A_DV2		BIT(6)	/* Countdown Chain */
  #define RTC_CTRL_A_DV1		BIT(5)	/* Oscillator Enable */
  #define RTC_CTRL_A_DV0		BIT(4)	/* Bank Select */
  #define RTC_CTRL_A_RS2		BIT(2)	/* Rate-Selection Bit 2 */
  #define RTC_CTRL_A_RS3		BIT(3)	/* Rate-Selection Bit 3 */
  #define RTC_CTRL_A_RS1		BIT(1)	/* Rate-Selection Bit 1 */
  #define RTC_CTRL_A_RS0		BIT(0)	/* Rate-Selection Bit 0 */
  #define RTC_CTRL_A_RS_MASK	0x0f	/* RS3 + RS2 + RS1 + RS0 */
  
  /*
   * Bit names in Control Register B.
   */
  #define RTC_CTRL_B_SET		BIT(7)	/* SET Bit */
  #define RTC_CTRL_B_PIE		BIT(6)	/* Periodic-Interrupt Enable */
  #define RTC_CTRL_B_AIE		BIT(5)	/* Alarm-Interrupt Enable */
  #define RTC_CTRL_B_UIE		BIT(4)	/* Update-Ended Interrupt-Enable */
  #define RTC_CTRL_B_SQWE		BIT(3)	/* Square-Wave Enable */
  #define RTC_CTRL_B_DM		BIT(2)	/* Data Mode */
  #define RTC_CTRL_B_2412		BIT(1)	/* 12-Hr/24-Hr Mode */
  #define RTC_CTRL_B_DSE		BIT(0)	/* Daylight Savings Enable */
  #define RTC_CTRL_B_PAU_MASK	0x70	/* PIE + AIE + UIE */
  
  
  /*
   * Bit names in Control Register C.
   *
   * BIT(0), BIT(1), BIT(2), & BIT(3) are unused, always return 0, and cannot
   * be written to.
   */
  #define RTC_CTRL_C_IRQF		BIT(7)	/* Interrupt-Request Flag */
  #define RTC_CTRL_C_PF		BIT(6)	/* Periodic-Interrupt Flag */
  #define RTC_CTRL_C_AF		BIT(5)	/* Alarm-Interrupt Flag */
  #define RTC_CTRL_C_UF		BIT(4)	/* Update-Ended Interrupt Flag */
  #define RTC_CTRL_C_PAU_MASK	0x70	/* PF + AF + UF */
  
  
  /*
   * Bit names in Control Register D.
   *
   * BIT(0) through BIT(6) are unused, always return 0, and cannot
   * be written to.
   */
  #define RTC_CTRL_D_VRT		BIT(7)	/* Valid RAM and Time */
  
  
  /*
   * Bit names in Extended Control Register 4A.
   *
   * On the DS1685/DS1687/DS1689/DS1693, BIT(4) and BIT(5) are reserved for
   * future use.  They can be read from and written to, but have no effect
   * on the RTC's operation.
   *
   * On the DS17x85/DS17x87, BIT(5) is Burst-Mode Enable (BME), and allows
   * access to the extended NV-SRAM by automatically incrementing the address
   * register when they are read from or written to.
   */
  #define RTC_CTRL_4A_VRT2	BIT(7)	/* Auxillary Battery Status */
  #define RTC_CTRL_4A_INCR	BIT(6)	/* Increment-in-Progress Status */
  #define RTC_CTRL_4A_PAB		BIT(3)	/* Power-Active Bar Control */
  #define RTC_CTRL_4A_RF		BIT(2)	/* RAM-Clear Flag */
  #define RTC_CTRL_4A_WF		BIT(1)	/* Wake-Up Alarm Flag */
  #define RTC_CTRL_4A_KF		BIT(0)	/* Kickstart Flag */
  #if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
  #define RTC_CTRL_4A_BME		BIT(5)	/* Burst-Mode Enable */
  #endif
  #define RTC_CTRL_4A_RWK_MASK	0x07	/* RF + WF + KF */
  
  
  /*
   * Bit names in Extended Control Register 4B.
   */
  #define RTC_CTRL_4B_ABE		BIT(7)	/* Auxillary Battery Enable */
  #define RTC_CTRL_4B_E32K	BIT(6)	/* Enable 32.768Hz on SQW Pin */
  #define RTC_CTRL_4B_CS		BIT(5)	/* Crystal Select */
  #define RTC_CTRL_4B_RCE		BIT(4)	/* RAM Clear-Enable */
  #define RTC_CTRL_4B_PRS		BIT(3)	/* PAB Reset-Select */
  #define RTC_CTRL_4B_RIE		BIT(2)	/* RAM Clear-Interrupt Enable */
  #define RTC_CTRL_4B_WIE		BIT(1)	/* Wake-Up Alarm-Interrupt Enable */
  #define RTC_CTRL_4B_KSE		BIT(0)	/* Kickstart Interrupt-Enable */
  #define RTC_CTRL_4B_RWK_MASK	0x07	/* RIE + WIE + KSE */
  
  
  /*
   * Misc register names in Bank 1.
   *
   * The DV0 bit in Control Register A must be set to 1 for these registers
   * to become available, including Extended Control Registers 4A & 4B.
   */
  #define RTC_BANK1_SSN_MODEL	0x40	/* Model Number */
  #define RTC_BANK1_SSN_BYTE_1	0x41	/* 1st Byte of Serial Number */
  #define RTC_BANK1_SSN_BYTE_2	0x42	/* 2nd Byte of Serial Number */
  #define RTC_BANK1_SSN_BYTE_3	0x43	/* 3rd Byte of Serial Number */
  #define RTC_BANK1_SSN_BYTE_4	0x44	/* 4th Byte of Serial Number */
  #define RTC_BANK1_SSN_BYTE_5	0x45	/* 5th Byte of Serial Number */
  #define RTC_BANK1_SSN_BYTE_6	0x46	/* 6th Byte of Serial Number */
  #define RTC_BANK1_SSN_CRC	0x47	/* Serial CRC Byte */
  #define RTC_BANK1_RAM_DATA_PORT	0x53	/* Extended RAM Data Port */
  
  
  /*
   * Model-specific registers in Bank 1.
   *
   * The addresses below differ depending on the model of the RTC chip
   * selected in the kernel configuration.  Not all of these features are
   * supported in the main driver at present.
   *
   * DS1685/DS1687   - Extended NV-SRAM address (LSB only).
   * DS1689/DS1693   - Vcc, Vbat, Pwr Cycle Counters & Customer-specific S/N.
   * DS17x85/DS17x87 - Extended NV-SRAM addresses (MSB & LSB) & Write counter.
   */
  #if defined(CONFIG_RTC_DRV_DS1685)
  #define RTC_BANK1_RAM_ADDR	0x50	/* NV-SRAM Addr */
  #elif defined(CONFIG_RTC_DRV_DS1689)
  #define RTC_BANK1_VCC_CTR_LSB	0x54	/* Vcc Counter Addr (LSB) */
  #define RTC_BANK1_VCC_CTR_MSB	0x57	/* Vcc Counter Addr (MSB) */
  #define RTC_BANK1_VBAT_CTR_LSB	0x58	/* Vbat Counter Addr (LSB) */
  #define RTC_BANK1_VBAT_CTR_MSB	0x5b	/* Vbat Counter Addr (MSB) */
  #define RTC_BANK1_PWR_CTR_LSB	0x5c	/* Pwr Cycle Counter Addr (LSB) */
  #define RTC_BANK1_PWR_CTR_MSB	0x5d	/* Pwr Cycle Counter Addr (MSB) */
  #define RTC_BANK1_UNIQ_SN	0x60	/* Customer-specific S/N */
  #else /* DS17x85/DS17x87 */
  #define RTC_BANK1_RAM_ADDR_LSB	0x50	/* NV-SRAM Addr (LSB) */
  #define RTC_BANK1_RAM_ADDR_MSB	0x51	/* NV-SRAM Addr (MSB) */
  #define RTC_BANK1_WRITE_CTR	0x5e	/* RTC Write Counter */
  #endif
  
  
  /*
   * Model numbers.
   *
   * The DS1688/DS1691 and DS1689/DS1693 chips share the same model number
   * and the manual doesn't indicate any major differences.  As such, they
   * are regarded as the same chip in this driver.
   */
  #define RTC_MODEL_DS1685	0x71	/* DS1685/DS1687 */
  #define RTC_MODEL_DS17285	0x72	/* DS17285/DS17287 */
  #define RTC_MODEL_DS1689	0x73	/* DS1688/DS1691/DS1689/DS1693 */
  #define RTC_MODEL_DS17485	0x74	/* DS17485/DS17487 */
  #define RTC_MODEL_DS17885	0x78	/* DS17885/DS17887 */
  
  
  /*
   * Periodic Interrupt Rates / Square-Wave Output Frequency
   *
   * Periodic rates are selected by setting the RS3-RS0 bits in Control
   * Register A and enabled via either the E32K bit in Extended Control
   * Register 4B or the SQWE bit in Control Register B.
   *
   * E32K overrides the settings of RS3-RS0 and outputs a frequency of 32768Hz
   * on the SQW pin of the RTC chip.  While there are 16 possible selections,
   * the 1-of-16 decoder is only able to divide the base 32768Hz signal into 13
   * smaller frequencies.  The values 0x01 and 0x02 are not used and are
   * synonymous with 0x08 and 0x09, respectively.
   *
   * When E32K is set to a logic 1, periodic interrupts are disabled and reading
   * /dev/rtc will return -EINVAL.  This also applies if the periodic interrupt
   * frequency is set to 0Hz.
   *
   * Not currently used by the rtc-ds1685 driver because the RTC core removed
   * support for hardware-generated periodic-interrupts in favour of
   * hrtimer-generated interrupts.  But these defines are kept around for use
   * in userland, as documentation to the hardware, and possible future use if
   * hardware-generated periodic interrupts are ever added back.
   */
  					/* E32K RS3 RS2 RS1 RS0 */
  #define RTC_SQW_8192HZ		0x03	/*  0    0   0   1   1  */
  #define RTC_SQW_4096HZ		0x04	/*  0    0   1   0   0  */
  #define RTC_SQW_2048HZ		0x05	/*  0    0   1   0   1  */
  #define RTC_SQW_1024HZ		0x06	/*  0    0   1   1   0  */
  #define RTC_SQW_512HZ		0x07	/*  0    0   1   1   1  */
  #define RTC_SQW_256HZ		0x08	/*  0    1   0   0   0  */
  #define RTC_SQW_128HZ		0x09	/*  0    1   0   0   1  */
  #define RTC_SQW_64HZ		0x0a	/*  0    1   0   1   0  */
  #define RTC_SQW_32HZ		0x0b	/*  0    1   0   1   1  */
  #define RTC_SQW_16HZ		0x0c	/*  0    1   1   0   0  */
  #define RTC_SQW_8HZ		0x0d	/*  0    1   1   0   1  */
  #define RTC_SQW_4HZ		0x0e	/*  0    1   1   1   0  */
  #define RTC_SQW_2HZ		0x0f	/*  0    1   1   1   1  */
  #define RTC_SQW_0HZ		0x00	/*  0    0   0   0   0  */
  #define RTC_SQW_32768HZ		32768	/*  1    -   -   -   -  */
  #define RTC_MAX_USER_FREQ	8192
  
  
  /*
   * NVRAM data & addresses:
   *   - 50 bytes of NVRAM are available just past the clock registers.
   *   - 64 additional bytes are available in Bank0.
   *
   * Extended, battery-backed NV-SRAM:
   *   - DS1685/DS1687    - 128 bytes.
   *   - DS1689/DS1693    - 0 bytes.
   *   - DS17285/DS17287  - 2048 bytes.
   *   - DS17485/DS17487  - 4096 bytes.
   *   - DS17885/DS17887  - 8192 bytes.
   */
  #define NVRAM_TIME_BASE		0x0e	/* NVRAM Addr in Time regs */
  #define NVRAM_BANK0_BASE	0x40	/* NVRAM Addr in Bank0 regs */
  #define NVRAM_SZ_TIME		50
  #define NVRAM_SZ_BANK0		64
  #if defined(CONFIG_RTC_DRV_DS1685)
  #  define NVRAM_SZ_EXTND	128
  #elif defined(CONFIG_RTC_DRV_DS1689)
  #  define NVRAM_SZ_EXTND	0
  #elif defined(CONFIG_RTC_DRV_DS17285)
  #  define NVRAM_SZ_EXTND	2048
  #elif defined(CONFIG_RTC_DRV_DS17485)
  #  define NVRAM_SZ_EXTND	4096
  #elif defined(CONFIG_RTC_DRV_DS17885)
  #  define NVRAM_SZ_EXTND	8192
  #endif
  #define NVRAM_TOTAL_SZ_BANK0	(NVRAM_SZ_TIME + NVRAM_SZ_BANK0)
  #define NVRAM_TOTAL_SZ		(NVRAM_TOTAL_SZ_BANK0 + NVRAM_SZ_EXTND)
  
  
  /*
   * Function Prototypes.
   */
  extern void __noreturn
  ds1685_rtc_poweroff(struct platform_device *pdev);
  
  #endif /* _LINUX_RTC_DS1685_H_ */