#
  #	EDAC Kconfig
  #	Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
  #	Licensed and distributed under the GPL
  
  config EDAC_ATOMIC_SCRUB
  	bool
  
  config EDAC_SUPPORT
  	bool
  
  menuconfig EDAC
  	bool "EDAC (Error Detection And Correction) reporting"
  	depends on HAS_IOMEM && EDAC_SUPPORT
  	help
  	  EDAC is designed to report errors in the core system.
  	  These are low-level errors that are reported in the CPU or
  	  supporting chipset or other subsystems:
  	  memory errors, cache errors, PCI errors, thermal throttling, etc..
  	  If unsure, select 'Y'.
  
  	  If this code is reporting problems on your system, please
  	  see the EDAC project web pages for more information at:
  
  	  <http://bluesmoke.sourceforge.net/>
  
  	  and:
  
  	  <http://buttersideup.com/edacwiki>
  
  	  There is also a mailing list for the EDAC project, which can
  	  be found via the sourceforge page.
  
  if EDAC
  
  config EDAC_LEGACY_SYSFS
  	bool "EDAC legacy sysfs"
  	default y
  	help
  	  Enable the compatibility sysfs nodes.
  	  Use 'Y' if your edac utilities aren't ported to work with the newer
  	  structures.
  
  config EDAC_DEBUG
  	bool "Debugging"
  	help
  	  This turns on debugging information for the entire EDAC subsystem.
  	  You do so by inserting edac_module with "edac_debug_level=x." Valid
  	  levels are 0-4 (from low to high) and by default it is set to 2.
  	  Usually you should select 'N' here.
  
  config EDAC_DECODE_MCE
  	tristate "Decode MCEs in human-readable form (only on AMD for now)"
  	depends on CPU_SUP_AMD && X86_MCE_AMD
  	default y
  	---help---
  	  Enable this option if you want to decode Machine Check Exceptions
  	  occurring on your machine in human-readable form.
  
  	  You should definitely say Y here in case you want to decode MCEs
  	  which occur really early upon boot, before the module infrastructure
  	  has been initialized.
  
  config EDAC_MM_EDAC
  	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
  	select RAS
  	help
  	  Some systems are able to detect and correct errors in main
  	  memory.  EDAC can report statistics on memory error
  	  detection and correction (EDAC - or commonly referred to ECC
  	  errors).  EDAC will also try to decode where these errors
  	  occurred so that a particular failing memory module can be
  	  replaced.  If unsure, select 'Y'.
  
  config EDAC_GHES
  	bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
  	depends on ACPI_APEI_GHES && (EDAC_MM_EDAC=y)
  	default y
  	help
  	  Not all machines support hardware-driven error report. Some of those
  	  provide a BIOS-driven error report mechanism via ACPI, using the
  	  APEI/GHES driver. By enabling this option, the error reports provided
  	  by GHES are sent to userspace via the EDAC API.
  
  	  When this option is enabled, it will disable the hardware-driven
  	  mechanisms, if a GHES BIOS is detected, entering into the
  	  "Firmware First" mode.
  
  	  It should be noticed that keeping both GHES and a hardware-driven
  	  error mechanism won't work well, as BIOS will race with OS, while
  	  reading the error registers. So, if you want to not use "Firmware
  	  first" GHES error mechanism, you should disable GHES either at
  	  compilation time or by passing "ghes.disable=1" Kernel parameter
  	  at boot time.
  
  	  In doubt, say 'Y'.
  
  config EDAC_AMD64
  	tristate "AMD64 (Opteron, Athlon64)"
  	depends on EDAC_MM_EDAC && AMD_NB && EDAC_DECODE_MCE
  	help
  	  Support for error detection and correction of DRAM ECC errors on
  	  the AMD64 families (>= K8) of memory controllers.
  
  config EDAC_AMD64_ERROR_INJECTION
  	bool "Sysfs HW Error injection facilities"
  	depends on EDAC_AMD64
  	help
  	  Recent Opterons (Family 10h and later) provide for Memory Error
  	  Injection into the ECC detection circuits. The amd64_edac module
  	  allows the operator/user to inject Uncorrectable and Correctable
  	  errors into DRAM.
  
  	  When enabled, in each of the respective memory controller directories
  	  (/sys/devices/system/edac/mc/mcX), there are 3 input files:
  
  	  - inject_section (0..3, 16-byte section of 64-byte cacheline),
  	  - inject_word (0..8, 16-bit word of 16-byte section),
  	  - inject_ecc_vector (hex ecc vector: select bits of inject word)
  
  	  In addition, there are two control files, inject_read and inject_write,
  	  which trigger the DRAM ECC Read and Write respectively.
  
  config EDAC_AMD76X
  	tristate "AMD 76x (760, 762, 768)"
  	depends on EDAC_MM_EDAC && PCI && X86_32
  	help
  	  Support for error detection and correction on the AMD 76x
  	  series of chipsets used with the Athlon processor.
  
  config EDAC_E7XXX
  	tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
  	depends on EDAC_MM_EDAC && PCI && X86_32
  	help
  	  Support for error detection and correction on the Intel
  	  E7205, E7500, E7501 and E7505 server chipsets.
  
  config EDAC_E752X
  	tristate "Intel e752x (e7520, e7525, e7320) and 3100"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction on the Intel
  	  E7520, E7525, E7320 server chipsets.
  
  config EDAC_I82443BXGX
  	tristate "Intel 82443BX/GX (440BX/GX)"
  	depends on EDAC_MM_EDAC && PCI && X86_32
  	depends on BROKEN
  	help
  	  Support for error detection and correction on the Intel
  	  82443BX/GX memory controllers (440BX/GX chipsets).
  
  config EDAC_I82875P
  	tristate "Intel 82875p (D82875P, E7210)"
  	depends on EDAC_MM_EDAC && PCI && X86_32
  	help
  	  Support for error detection and correction on the Intel
  	  DP82785P and E7210 server chipsets.
  
  config EDAC_I82975X
  	tristate "Intel 82975x (D82975x)"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction on the Intel
  	  DP82975x server chipsets.
  
  config EDAC_I3000
  	tristate "Intel 3000/3010"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction on the Intel
  	  3000 and 3010 server chipsets.
  
  config EDAC_I3200
  	tristate "Intel 3200"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction on the Intel
  	  3200 and 3210 server chipsets.
  
  config EDAC_IE31200
  	tristate "Intel e312xx"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction on the Intel
  	  E3-1200 based DRAM controllers.
  
  config EDAC_X38
  	tristate "Intel X38"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction on the Intel
  	  X38 server chipsets.
  
  config EDAC_I5400
  	tristate "Intel 5400 (Seaburg) chipsets"
  	depends on EDAC_MM_EDAC && PCI && X86
  	help
  	  Support for error detection and correction the Intel
  	  i5400 MCH chipset (Seaburg).
  
  config EDAC_I7CORE
  	tristate "Intel i7 Core (Nehalem) processors"
  	depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
  	help
  	  Support for error detection and correction the Intel
  	  i7 Core (Nehalem) Integrated Memory Controller that exists on
  	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
  	  and Xeon 55xx processors.
  
  config EDAC_I82860
  	tristate "Intel 82860"
  	depends on EDAC_MM_EDAC && PCI && X86_32
  	help
  	  Support for error detection and correction on the Intel
  	  82860 chipset.
  
  config EDAC_R82600
  	tristate "Radisys 82600 embedded chipset"
  	depends on EDAC_MM_EDAC && PCI && X86_32
  	help
  	  Support for error detection and correction on the Radisys
  	  82600 embedded chipset.
  
  config EDAC_I5000
  	tristate "Intel Greencreek/Blackford chipset"
  	depends on EDAC_MM_EDAC && X86 && PCI
  	help
  	  Support for error detection and correction the Intel
  	  Greekcreek/Blackford chipsets.
  
  config EDAC_I5100
  	tristate "Intel San Clemente MCH"
  	depends on EDAC_MM_EDAC && X86 && PCI
  	help
  	  Support for error detection and correction the Intel
  	  San Clemente MCH.
  
  config EDAC_I7300
  	tristate "Intel Clarksboro MCH"
  	depends on EDAC_MM_EDAC && X86 && PCI
  	help
  	  Support for error detection and correction the Intel
  	  Clarksboro MCH (Intel 7300 chipset).
  
  config EDAC_SBRIDGE
  	tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC"
  	depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
  	depends on PCI_MMCONFIG
  	help
  	  Support for error detection and correction the Intel
  	  Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
  
  config EDAC_MPC85XX
  	tristate "Freescale MPC83xx / MPC85xx"
  	depends on EDAC_MM_EDAC && FSL_SOC
  	help
  	  Support for error detection and correction on the Freescale
  	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
  
  config EDAC_MV64X60
  	tristate "Marvell MV64x60"
  	depends on EDAC_MM_EDAC && MV64X60
  	help
  	  Support for error detection and correction on the Marvell
  	  MV64360 and MV64460 chipsets.
  
  config EDAC_PASEMI
  	tristate "PA Semi PWRficient"
  	depends on EDAC_MM_EDAC && PCI
  	depends on PPC_PASEMI
  	help
  	  Support for error detection and correction on PA Semi
  	  PWRficient.
  
  config EDAC_CELL
  	tristate "Cell Broadband Engine memory controller"
  	depends on EDAC_MM_EDAC && PPC_CELL_COMMON
  	help
  	  Support for error detection and correction on the
  	  Cell Broadband Engine internal memory controller
  	  on platform without a hypervisor
  
  config EDAC_PPC4XX
  	tristate "PPC4xx IBM DDR2 Memory Controller"
  	depends on EDAC_MM_EDAC && 4xx
  	help
  	  This enables support for EDAC on the ECC memory used
  	  with the IBM DDR2 memory controller found in various
  	  PowerPC 4xx embedded processors such as the 405EX[r],
  	  440SP, 440SPe, 460EX, 460GT and 460SX.
  
  config EDAC_AMD8131
  	tristate "AMD8131 HyperTransport PCI-X Tunnel"
  	depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
  	help
  	  Support for error detection and correction on the
  	  AMD8131 HyperTransport PCI-X Tunnel chip.
  	  Note, add more Kconfig dependency if it's adopted
  	  on some machine other than Maple.
  
  config EDAC_AMD8111
  	tristate "AMD8111 HyperTransport I/O Hub"
  	depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
  	help
  	  Support for error detection and correction on the
  	  AMD8111 HyperTransport I/O Hub chip.
  	  Note, add more Kconfig dependency if it's adopted
  	  on some machine other than Maple.
  
  config EDAC_CPC925
  	tristate "IBM CPC925 Memory Controller (PPC970FX)"
  	depends on EDAC_MM_EDAC && PPC64
  	help
  	  Support for error detection and correction on the
  	  IBM CPC925 Bridge and Memory Controller, which is
  	  a companion chip to the PowerPC 970 family of
  	  processors.
  
  config EDAC_TILE
  	tristate "Tilera Memory Controller"
  	depends on EDAC_MM_EDAC && TILE
  	default y
  	help
  	  Support for error detection and correction on the
  	  Tilera memory controller.
  
  config EDAC_HIGHBANK_MC
  	tristate "Highbank Memory Controller"
  	depends on EDAC_MM_EDAC && ARCH_HIGHBANK
  	help
  	  Support for error detection and correction on the
  	  Calxeda Highbank memory controller.
  
  config EDAC_HIGHBANK_L2
  	tristate "Highbank L2 Cache"
  	depends on EDAC_MM_EDAC && ARCH_HIGHBANK
  	help
  	  Support for error detection and correction on the
  	  Calxeda Highbank memory controller.
  
  config EDAC_OCTEON_PC
  	tristate "Cavium Octeon Primary Caches"
  	depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
  	help
  	  Support for error detection and correction on the primary caches of
  	  the cnMIPS cores of Cavium Octeon family SOCs.
  
  config EDAC_OCTEON_L2C
  	tristate "Cavium Octeon Secondary Caches (L2C)"
  	depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
  	help
  	  Support for error detection and correction on the
  	  Cavium Octeon family of SOCs.
  
  config EDAC_OCTEON_LMC
  	tristate "Cavium Octeon DRAM Memory Controller (LMC)"
  	depends on EDAC_MM_EDAC && CAVIUM_OCTEON_SOC
  	help
  	  Support for error detection and correction on the
  	  Cavium Octeon family of SOCs.
  
  config EDAC_OCTEON_PCI
  	tristate "Cavium Octeon PCI Controller"
  	depends on EDAC_MM_EDAC && PCI && CAVIUM_OCTEON_SOC
  	help
  	  Support for error detection and correction on the
  	  Cavium Octeon family of SOCs.
  
  config EDAC_ALTERA_MC
  	bool "Altera SDRAM Memory Controller EDAC"
  	depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA
  	help
  	  Support for error detection and correction on the
  	  Altera SDRAM memory controller. Note that the
  	  preloader must initialize the SDRAM before loading
  	  the kernel.
  
  config EDAC_SYNOPSYS
  	tristate "Synopsys DDR Memory Controller"
  	depends on EDAC_MM_EDAC && ARCH_ZYNQ
  	help
  	  Support for error detection and correction on the Synopsys DDR
  	  memory controller.
  
  config EDAC_XGENE
  	tristate "APM X-Gene SoC"
  	depends on EDAC_MM_EDAC && (ARM64 || COMPILE_TEST)
  	help
  	  Support for error detection and correction on the
  	  APM X-Gene family of SOCs.
  
  config EDAC_KEYSTONE_MC
  	bool "Keystone DDR3 MC ECC handler"
  	depends on ARCH_KEYSTONE
  	help
  	  Support for double bit error detection by DDR3 Memory
  	  controller. This is a simple handler that can panic on double
  	  bit error.
  
  endif # EDAC