/* * External connector (extcon) class driver * * Copyright (C) 2012 Samsung Electronics * Author: Donggeun Kim * Author: MyungJoo Ham * * based on switch class driver * Copyright (C) 2008 Google, Inc. * Author: Mike Lockwood * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef __LINUX_EXTCON_H__ #define __LINUX_EXTCON_H__ #include #include #include #define SUPPORTED_CABLE_MAX 32 #define CABLE_NAME_MAX SUPPORTED_CABLE_MAX #define EXTCON_DEV_NAME "extcon-muic" /* * The standard cable name is to help support general notifier * and notifiee device drivers to share the common names. * Please use standard cable names unless your notifier device has * a very unique and abnormal cable or * the cable type is supposed to be used with only one unique * pair of notifier/notifiee devices. * * Please add any other "standard" cables used with extcon dev. * * You may add a dot and number to specify version or specification * of the specific cable if it is required. (e.g., "Fast-charger.18" * and "Fast-charger.10" for 1.8A and 1.0A chargers) * However, the notifiee and notifier should be able to handle such * string and if the notifiee can negotiate the protocol or identify, * you don't need such convention. This convention is helpful when * notifier can distinguish but notifiee cannot. */ enum extcon_cable_name { EXTCON_USB = 0, EXTCON_USB_HOST, EXTCON_TA, /* Travel Adaptor */ EXTCON_FAST_CHARGER, EXTCON_SLOW_CHARGER, EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */ EXTCON_HDMI, EXTCON_MHL, EXTCON_DVI, EXTCON_VGA, EXTCON_DOCK, EXTCON_LINE_IN, EXTCON_LINE_OUT, EXTCON_MIC_IN, EXTCON_HEADPHONE_OUT, EXTCON_SPDIF_IN, EXTCON_SPDIF_OUT, EXTCON_VIDEO_IN, EXTCON_VIDEO_OUT, EXTCON_MECHANICAL, EXTCON_HV_PREPARE, EXTCON_HV_TA, /* High Voltage Charger(9V) */ EXTCON_HV_TA_ERR, /* Out of range HV Charger(5~9V) */ EXTCON_DESKDOCK, EXTCON_DESKDOCK_VB, EXTCON_AUDIODOCK, EXTCON_SMARTDOCK, EXTCON_SMARTDOCK_TA, EXTCON_SMARTDOCK_USB, EXTCON_MULTIMEDIADOCK, EXTCON_JIG_UARTOFF, EXTCON_JIG_UARTOFF_VB, EXTCON_JIG_UARTON, EXTCON_JIG_USBOFF, EXTCON_JIG_USBON, EXTCON_INCOMPATIBLE, EXTCON_CHARGING_CABLE, #if defined(CONFIG_MUIC_SUPPORT_HMT_DETECTION) EXTCON_HMT, #endif EXTCON_HV_TA_1A, /* UNDEFINE but charging */ EXTCON_NONE, }; extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; struct extcon_cable; /** * struct extcon_dev - An extcon device represents one external connector. * @name: The name of this extcon device. Parent device name is * used if NULL. * @supported_cable: Array of supported cable names ending with NULL. * If supported_cable is NULL, cable name related APIs * are disabled. * @mutually_exclusive: Array of mutually exclusive set of cables that cannot * be attached simultaneously. The array should be * ending with NULL or be NULL (no mutually exclusive * cables). For example, if it is { 0x7, 0x30, 0}, then, * {0, 1}, {0, 1, 2}, {0, 2}, {1, 2}, or {4, 5} cannot * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. * @print_name: An optional callback to override the method to print the * name of the extcon device. * @print_state: An optional callback to override the method to print the * status of the extcon device. * @dev: Device of this extcon. * @state: Attach/detach state of this extcon. Do not provide at * register-time. * @nh: Notifier for the state change events from this extcon * @entry: To support list of extcon devices so that users can search * for extcon devices based on the extcon name. * @lock: * @max_supported: Internal value to store the number of cables. * @extcon_dev_type: Device_type struct to provide attribute_groups * customized for each extcon device. * @cables: Sysfs subdirectories. Each represents one cable. * * In most cases, users only need to provide "User initializing data" of * this struct when registering an extcon. In some exceptional cases, * optional callbacks may be needed. However, the values in "internal data" * are overwritten by register function. */ struct extcon_dev { /* Optional user initializing data */ const char *name; const char **supported_cable; const u32 *mutually_exclusive; /* Optional callbacks to override class functions */ ssize_t (*print_name)(struct extcon_dev *edev, char *buf); ssize_t (*print_state)(struct extcon_dev *edev, char *buf); /* Internal data. Please do not set. */ struct device dev; struct raw_notifier_head nh; struct list_head entry; int max_supported; spinlock_t lock; /* could be called by irq handler */ u32 state; /* /sys/class/extcon/.../cable.n/... */ struct device_type extcon_dev_type; struct extcon_cable *cables; /* /sys/class/extcon/.../mutually_exclusive/... */ struct attribute_group attr_g_muex; struct attribute **attrs_muex; struct device_attribute *d_attrs_muex; }; /** * struct extcon_cable - An internal data for each cable of extcon device. * @edev: The extcon device * @cable_index: Index of this cable in the edev * @attr_g: Attribute group for the cable * @attr_name: "name" sysfs entry * @attr_state: "state" sysfs entry * @attrs: Array pointing to attr_name and attr_state for attr_g */ struct extcon_cable { struct extcon_dev *edev; int cable_index; struct attribute_group attr_g; struct device_attribute attr_name; struct device_attribute attr_state; struct attribute *attrs[3]; /* to be fed to attr_g.attrs */ }; /** * struct extcon_specific_cable_nb - An internal data for * extcon_register_interest(). * @internal_nb: A notifier block bridging extcon notifier * and cable notifier. * @user_nb: user provided notifier block for events from * a specific cable. * @cable_index: the target cable. * @edev: the target extcon device. * @previous_value: the saved previous event value. */ struct extcon_specific_cable_nb { struct notifier_block internal_nb; struct notifier_block *user_nb; int cable_index; struct extcon_dev *edev; unsigned long previous_value; }; #if IS_ENABLED(CONFIG_EXTCON) /* * Following APIs are for notifiers or configurations. * Notifiers are the external port and connection devices. */ extern int extcon_dev_register(struct extcon_dev *edev); extern void extcon_dev_unregister(struct extcon_dev *edev); extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name); /* * get/set/update_state access the 32b encoded state value, which represents * states of all possible cables of the multistate port. For example, if one * calls extcon_set_state(edev, 0x7), it may mean that all the three cables * are attached to the port. */ static inline u32 extcon_get_state(struct extcon_dev *edev) { return edev->state; } extern int extcon_set_state(struct extcon_dev *edev, u32 state); extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); /* * get/set_cable_state access each bit of the 32b encoded state value. * They are used to access the status of each cable based on the cable_name * or cable_index, which is retrieved by extcon_find_cable_index */ extern int extcon_find_cable_index(struct extcon_dev *sdev, const char *cable_name); extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index); extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, bool cable_state); extern int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name); extern int extcon_set_cable_state(struct extcon_dev *edev, const char *cable_name, bool cable_state); /* * Following APIs are for notifiees (those who want to be notified) * to register a callback for events from a specific cable of the extcon. * Notifiees are the connected device drivers wanting to get notified by * a specific external port of a connection device. */ extern int extcon_register_interest(struct extcon_specific_cable_nb *obj, const char *extcon_name, const char *cable_name, struct notifier_block *nb); extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb); /* * Following APIs are to monitor every action of a notifier. * Registrar gets notified for every external port of a connection device. * Probably this could be used to debug an action of notifier; however, * we do not recommend to use this for normal 'notifiee' device drivers who * want to be notified by a specific external port of the notifier. */ extern int extcon_register_notifier(struct extcon_dev *edev, struct notifier_block *nb); extern int extcon_unregister_notifier(struct extcon_dev *edev, struct notifier_block *nb); #else /* CONFIG_EXTCON */ static inline int extcon_dev_register(struct extcon_dev *edev) { return 0; } static inline void extcon_dev_unregister(struct extcon_dev *edev) { } static inline u32 extcon_get_state(struct extcon_dev *edev) { return 0; } static inline int extcon_set_state(struct extcon_dev *edev, u32 state) { return 0; } static inline int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state) { return 0; } static inline int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name) { return 0; } static inline int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index) { return 0; } static inline int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, bool cable_state) { return 0; } static inline int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name) { return 0; } static inline int extcon_set_cable_state(struct extcon_dev *edev, const char *cable_name, int state) { return 0; } static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) { return NULL; } static inline int extcon_register_notifier(struct extcon_dev *edev, struct notifier_block *nb) { return 0; } static inline int extcon_unregister_notifier(struct extcon_dev *edev, struct notifier_block *nb) { return 0; } static inline int extcon_register_interest(struct extcon_specific_cable_nb *obj, const char *extcon_name, const char *cable_name, struct notifier_block *nb) { return 0; } static inline int extcon_unregister_interest(struct extcon_specific_cable_nb *obj) { return 0; } #endif /* CONFIG_EXTCON */ #endif /* __LINUX_EXTCON_H__ */