mx6_qsb
#hid/bulk,[old_header,]max packet size, {ram start, ram size}(repeat valid ram areas)
hid,1024,0x10000000,1G,0x00907000,0x31000
#file:dcd,plug,load nnn,jump [nnn/header/header2]
#jump nnn - header is after last downloaded word
#            entire file is loaded before jump, needs load nnn as well
# i.e. file:load nnn,jump nnn
#jump header - only length parameter is downloaded
#header - uses existing header(error if none), but clears plug and dcd values unless plug also specified
#header2 - uses 2nd header found(error if none)
#plug - without jump uses header but clears plug flag to stop after plug execution
#load nnn - load entire file to address
#../u-boot-imx6/u-boot.bin:dcd,plug,jump header
#:modify,020e02a8,7,1
#:modify,020e00bc,7,4
#:read,020e02a8
#:read,020e00bc
#:read,020c4078
#:modify,020c407c,0,0f000000
#:modify,020c4080,0,c00
#:read,020c4084
#../imx_utils/mx6_ddr_init_xm.bin:dcd
#../u-boot-imx6/u-boot.bin:load 0x13effc00
#../u-boot-imx6/u-boot.imx:load 0x13f00000
#../u-boot-dirk/u-boot.imx:load 0x13f00000
#u-boot-6w.bin:load 0x13effc00
#u-boot_1103.bin:load 0x13effc00
#u-boot_1103.bin:jump header
#../imx_utils/mx6_ecspi_ram_write_xm.bin:clear_dcd,plug
#../imx6_obds/output/mx61/bin/diag-obds-mx61qsb-rev1.bin:jump header