/*
* PCIe host controller driver for Freescale i.MX6 SoCs
*
* Copyright (C) 2014-2015 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2013 Kosagi
* http://www.kosagi.com
*
* Author: Sean Cross <xobs@kosagi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/busfreq-imx6.h>
#include <linux/regulator/consumer.h>
#include "pcie-designware.h"
#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
/*
* The default value of the reserved ddr memory
* used to verify EP/RC memory space access operations.
* The layout of the 1G ddr on SD boards
* [others]0x1000_0000 ~ 0x4FFF_FFFF
* [imx6sx]0x8000_0000 ~ 0xBFFF_FFFF
*
*/
static u32 ddr_test_region = 0, test_region_size = SZ_2M;
struct imx6_pcie {
int reset_gpio;
int power_on_gpio;
struct clk *pcie_bus;
struct clk *pcie_phy;
struct clk *pcie_inbound_axi;
struct clk *ref_100m;
struct clk *pcie;
struct pcie_port pp;
struct regmap *iomuxc_gpr;
struct regulator *pcie_phy_regulator;
void __iomem *mem_base;
int force_detect_state;
};
/* PCIe Root Complex registers (memory-mapped) */
#define PCIE_RC_LCR 0x7c
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1 0x1
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2 0x2
#define PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK 0xf
/* PCIe Port Logic registers (memory-mapped) */
#define PL_OFFSET 0x700
#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16)
#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4)
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
#define PCIE_PHY_CTRL_DATA_LOC 0
#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
#define PCIE_PHY_CTRL_WR_LOC 18
#define PCIE_PHY_CTRL_RD_LOC 19
#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
#define PCIE_PHY_STAT_ACK_LOC 16
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
/* PHY registers (not memory-mapped) */
#define PCIE_PHY_RX_ASIC_OUT 0x100D
#define PHY_RX_OVRD_IN_LO 0x1005
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
static inline bool is_imx6sx_pcie(struct imx6_pcie *imx6_pcie)
{
struct pcie_port *pp = &imx6_pcie->pp;
struct device_node *np = pp->dev->of_node;
return of_device_is_compatible(np, "fsl,imx6sx-pcie");
}
static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
{
u32 val;
u32 max_iterations = 10;
u32 wait_counter = 0;
do {
val = readl(dbi_base + PCIE_PHY_STAT);
val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
wait_counter++;
if (val == exp_val)
return 0;
udelay(1);
} while (wait_counter < max_iterations);
return -ETIMEDOUT;
}
static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
{
u32 val;
int ret;
val = addr << PCIE_PHY_CTRL_DATA_LOC;
writel(val, dbi_base + PCIE_PHY_CTRL);
val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
writel(val, dbi_base + PCIE_PHY_CTRL);
ret = pcie_phy_poll_ack(dbi_base, 1);
if (ret)
return ret;
val = addr << PCIE_PHY_CTRL_DATA_LOC;
writel(val, dbi_base + PCIE_PHY_CTRL);
ret = pcie_phy_poll_ack(dbi_base, 0);
if (ret)
return ret;
return 0;
}
/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
{
u32 val, phy_ctl;
int ret;
ret = pcie_phy_wait_ack(dbi_base, addr);
if (ret)
return ret;
/* assert Read signal */
phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
ret = pcie_phy_poll_ack(dbi_base, 1);
if (ret)
return ret;
val = readl(dbi_base + PCIE_PHY_STAT);
*data = val & 0xffff;
/* deassert Read signal */
writel(0x00, dbi_base + PCIE_PHY_CTRL);
ret = pcie_phy_poll_ack(dbi_base, 0);
if (ret)
return ret;
return 0;
}
static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
{
u32 var;
int ret;
/* write addr */
/* cap addr */
ret = pcie_phy_wait_ack(dbi_base, addr);
if (ret)
return ret;
var = data << PCIE_PHY_CTRL_DATA_LOC;
writel(var, dbi_base + PCIE_PHY_CTRL);
/* capture data */
var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
writel(var, dbi_base + PCIE_PHY_CTRL);
ret = pcie_phy_poll_ack(dbi_base, 1);
if (ret)
return ret;
/* deassert cap data */
var = data << PCIE_PHY_CTRL_DATA_LOC;
writel(var, dbi_base + PCIE_PHY_CTRL);
/* wait for ack de-assertion */
ret = pcie_phy_poll_ack(dbi_base, 0);
if (ret)
return ret;
/* assert wr signal */
var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
writel(var, dbi_base + PCIE_PHY_CTRL);
/* wait for ack */
ret = pcie_phy_poll_ack(dbi_base, 1);
if (ret)
return ret;
/* deassert wr signal */
var = data << PCIE_PHY_CTRL_DATA_LOC;
writel(var, dbi_base + PCIE_PHY_CTRL);
/* wait for ack de-assertion */
ret = pcie_phy_poll_ack(dbi_base, 0);
if (ret)
return ret;
writel(0x0, dbi_base + PCIE_PHY_CTRL);
return 0;
}
/* Added for PCI abort handling */
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
{
return 0;
}
static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
u32 gpr1, gpr12;
if (is_imx6sx_pcie(imx6_pcie)) {
struct device_node *gpc_np;
void __iomem *gpc_reg;
#define GPC_CNTR 0
#define reg32_write(addr, val) __raw_writel(val, addr)
#define reg32_read(addr) __raw_readl(addr)
#define reg32setbit(addr, bitpos) \
reg32_write((addr), (reg32_read((addr)) | (1<<(bitpos))))
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_PD,
IMX6SX_GPR12_PCIE_TEST_PD);
/* Force PCIe PHY reset */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST,
IMX6SX_GPR5_PCIE_BTNRST);
/* map GPC register */
gpc_np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
gpc_reg = of_iomap(gpc_np, 0);
if (gpc_reg)
reg32setbit(gpc_reg + GPC_CNTR, 7);
else
dev_err(pp->dev, "ioremap failed with gpc base\n");
iounmap(gpc_reg);
} else {
/*
* If the bootloader already enabled the link we need
* some special handling to get the core back into a
* state where it is safe to touch it for configuration.
* As there is no dedicated reset signal wired up for
* MX6QDL, we need to manually force LTSSM into "detect"
* state before completely disabling LTSSM, which is a
* prerequisite for core configuration.
*
* If both LTSSM_ENABLE and REF_SSP_ENABLE are active we
* have a strong indication that the bootloader
* activated the link.
*/
regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
(gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
imx6_pcie->force_detect_state = 1;
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0);
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD,
IMX6Q_GPR1_PCIE_TEST_PD);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
}
return 0;
}
static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
int ret;
if (gpio_is_valid(imx6_pcie->power_on_gpio))
gpio_set_value(imx6_pcie->power_on_gpio, 1);
request_bus_freq(BUS_FREQ_HIGH);
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
if (ret) {
dev_err(pp->dev, "unable to enable pcie_phy clock\n");
goto err_pcie_phy;
}
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
if (ret) {
dev_err(pp->dev, "unable to enable pcie_bus clock\n");
goto err_pcie_bus;
}
ret = clk_prepare_enable(imx6_pcie->pcie);
if (ret) {
dev_err(pp->dev, "unable to enable pcie clock\n");
goto err_pcie;
}
if (is_imx6sx_pcie(imx6_pcie)) {
ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
if (ret) {
dev_err(pp->dev, "unable to enable pcie clock\n");
goto err_inbound_axi;
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_PD, 0);
} else {
/* power up core phy and enable ref clock */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0);
/* sata_ref is not used by pcie on imx6sx */
ret = clk_prepare_enable(imx6_pcie->ref_100m);
if (ret) {
dev_err(pp->dev, "unable to enable ref_100m\n");
goto err_inbound_axi;
}
/*
* the async reset input need ref clock to sync internally,
* when the ref clock comes after reset, internal synced
* reset time is too short , cannot meet the requirement.
* add one ~10us delay here.
*/
udelay(10);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN,
IMX6Q_GPR1_PCIE_REF_CLK_EN);
}
/* allow the clocks to stabilize */
udelay(200);
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0);
mdelay(100);
gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);
}
if (imx6_pcie->force_detect_state) {
u32 val;
imx6_pcie->force_detect_state = 0;
val = readl(pp->dbi_base + PCIE_PL_PFLR);
val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
val |= PCIE_PL_PFLR_FORCE_LINK;
writel(val, pp->dbi_base + PCIE_PL_PFLR);
}
/*
* Release the PCIe PHY reset here, that we have set in
* imx6_pcie_init_phy() now
*/
if (is_imx6sx_pcie(imx6_pcie))
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST, 0);
return 0;
err_inbound_axi:
clk_disable_unprepare(imx6_pcie->pcie);
err_pcie:
if (!IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS)
&& !IS_ENABLED(CONFIG_RC_MODE_IN_EP_RC_SYS))
clk_disable_unprepare(imx6_pcie->pcie_bus);
err_pcie_bus:
clk_disable_unprepare(imx6_pcie->pcie_phy);
err_pcie_phy:
return ret;
}
static int imx6_pcie_init_phy(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
int ret;
/* Power up the separate domain available on i.MX6SX */
if (is_imx6sx_pcie(imx6_pcie)) {
/* Force PCIe PHY reset */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST,
IMX6SX_GPR5_PCIE_BTNRST);
regulator_set_voltage(imx6_pcie->pcie_phy_regulator,
1100000, 1100000);
ret = regulator_enable(imx6_pcie->pcie_phy_regulator);
if (ret) {
dev_err(pp->dev, "failed to enable pcie regulator.\n");
return ret;
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_RX_EQ_MASK, IMX6SX_GPR12_RX_EQ_2);
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
/* configure constant input signal to the pcie ctrl and phy */
if (IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS))
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_DEVICE_TYPE,
PCI_EXP_TYPE_ENDPOINT << 12);
else
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_DEVICE_TYPE,
PCI_EXP_TYPE_ROOT_PORT << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_LOS_LEVEL, IMX6Q_GPR12_LOS_LEVEL_9);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
return 0;
}
static int imx6_pcie_wait_for_link(struct pcie_port *pp)
{
int count = 200;
while (!dw_pcie_link_up(pp)) {
udelay(100);
if (--count)
continue;
dev_err(pp->dev, "phy link never came up\n");
dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
return -EINVAL;
}
return 0;
}
static irqreturn_t imx6_pcie_msi_handler(int irq, void *arg)
{
struct pcie_port *pp = arg;
return dw_handle_msi_irq(pp);
}
static int imx6_pcie_start_link(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
uint32_t tmp;
int ret, count;
/*
* Force Gen1 operation when starting the link. In case the link is
* started in Gen2 mode, there is a possibility the devices on the
* bus will not be detected at all. This happens with PCIe switches.
*/
tmp = readl(pp->dbi_base + PCIE_RC_LCR);
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
writel(tmp, pp->dbi_base + PCIE_RC_LCR);
/* Start LTSSM. */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2,
IMX6Q_GPR12_PCIE_CTL_2);
ret = imx6_pcie_wait_for_link(pp);
if (ret)
goto out;
#ifndef CONFIG_PCIE_FORCE_GEN1
/* Allow Gen2 mode after the link is up. */
tmp = readl(pp->dbi_base + PCIE_RC_LCR);
tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
writel(tmp, pp->dbi_base + PCIE_RC_LCR);
#endif
/*
* Start Directed Speed Change so the best possible speed both link
* partners support can be negotiated.
*/
tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
tmp |= PORT_LOGIC_SPEED_CHANGE;
writel(tmp, pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
count = 200;
while (1) {
tmp = readl(pp->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
/* Test if the speed change finished. */
if (!(tmp & PORT_LOGIC_SPEED_CHANGE)) {
/* Make sure link training is finished as well! */
ret = imx6_pcie_wait_for_link(pp);
break;
}
if (count-- == 0) {
dev_err(pp->dev, "Speed change timeout\n");
ret = -EINVAL;
ret = imx6_pcie_wait_for_link(pp);
break;
}
udelay(100);
}
out:
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
clk_disable_unprepare(imx6_pcie->pcie);
if (!IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS)
&& !IS_ENABLED(CONFIG_RC_MODE_IN_EP_RC_SYS))
clk_disable_unprepare(imx6_pcie->pcie_bus);
clk_disable_unprepare(imx6_pcie->pcie_phy);
if (is_imx6sx_pcie(imx6_pcie)) {
/* Disable clks and power down PCIe PHY */
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
release_bus_freq(BUS_FREQ_HIGH);
/*
* Power down PCIe PHY.
*/
regulator_disable(imx6_pcie->pcie_phy_regulator);
} else {
clk_disable_unprepare(imx6_pcie->ref_100m);
release_bus_freq(BUS_FREQ_HIGH);
}
} else {
tmp = readl(pp->dbi_base + 0x80);
dev_info(pp->dev, "Link up, Gen=%i\n", (tmp >> 16) & 0xf);
}
return ret;
}
static int imx6_pcie_host_init(struct pcie_port *pp)
{
int ret;
/* enable disp_mix power domain */
pm_runtime_get_sync(pp->dev);
imx6_pcie_assert_core_reset(pp);
ret = imx6_pcie_init_phy(pp);
if (ret < 0)
return ret;
ret = imx6_pcie_deassert_core_reset(pp);
if (ret < 0)
return ret;
dw_pcie_setup_rc(pp);
ret = imx6_pcie_start_link(pp);
if (ret < 0)
return ret;
if (IS_ENABLED(CONFIG_PCI_MSI))
dw_pcie_msi_init(pp);
return 0;
}
static void imx6_pcie_reset_phy(struct pcie_port *pp)
{
uint32_t temp;
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
udelay(2000);
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &temp);
temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, temp);
}
static int imx6_pcie_link_up(struct pcie_port *pp)
{
u32 rc, debug_r0, rx_valid;
int count = 500;
/*
* Test if the PHY reports that the link is up and also that the LTSSM
* training finished. There are three possible states of the link when
* this code is called:
* 1) The link is DOWN (unlikely)
* The link didn't come up yet for some reason. This usually means
* we have a real problem somewhere. Reset the PHY and exit. This
* state calls for inspection of the DEBUG registers.
* 2) The link is UP, but still in LTSSM training
* Wait for the training to finish, which should take a very short
* time. If the training does not finish, we have a problem and we
* need to inspect the DEBUG registers. If the training does finish,
* the link is up and operating correctly.
* 3) The link is UP and no longer in LTSSM training
* The link is up and operating correctly.
*/
while (1) {
rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP))
break;
if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
return 1;
if (!count--)
break;
dev_dbg(pp->dev, "Link is up, but still in training\n");
/*
* Wait a little bit, then re-check if the link finished
* the training.
*/
udelay(10);
}
/*
* From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
* Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
* If (MAC/LTSSM.state == Recovery.RcvrLock)
* && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
* to gen2 is stuck
*/
pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
debug_r0 = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0);
if (rx_valid & 0x01)
return 0;
if ((debug_r0 & 0x3f) != 0x0d)
return 0;
dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
dev_dbg(pp->dev, "debug_r0=%08x debug_r1=%08x\n", debug_r0, rc);
imx6_pcie_reset_phy(pp);
return 0;
}
static struct pcie_host_ops imx6_pcie_host_ops = {
.link_up = imx6_pcie_link_up,
.host_init = imx6_pcie_host_init,
};
static int __init imx6_add_pcie_port(struct pcie_port *pp,
struct platform_device *pdev)
{
int ret;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
pp->msi_irq = platform_get_irq_byname(pdev, "msi");
if (pp->msi_irq <= 0) {
dev_err(&pdev->dev, "failed to get MSI irq\n");
return -ENODEV;
}
ret = devm_request_irq(&pdev->dev, pp->msi_irq,
imx6_pcie_msi_handler,
IRQF_SHARED, "mx6-pcie-msi", pp);
if (ret) {
dev_err(&pdev->dev, "failed to request MSI irq\n");
return -ENODEV;
}
}
pp->root_bus_nr = -1;
pp->ops = &imx6_pcie_host_ops;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(&pdev->dev, "failed to initialize host\n");
return ret;
}
return 0;
}
static ssize_t imx_pcie_bar0_addr_info(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
struct pcie_port *pp = &imx6_pcie->pp;
return sprintf(buf, "imx-pcie-bar0-addr-info start 0x%08x\n",
readl(pp->dbi_base + PCI_BASE_ADDRESS_0));
}
static ssize_t imx_pcie_bar0_addr_start(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
u32 bar_start;
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
struct pcie_port *pp = &imx6_pcie->pp;
sscanf(buf, "%x\n", &bar_start);
writel(bar_start, pp->dbi_base + PCI_BASE_ADDRESS_0);
return count;
}
static void imx_pcie_regions_setup(struct device *dev)
{
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
struct pcie_port *pp = &imx6_pcie->pp;
if (is_imx6sx_pcie(imx6_pcie) && ddr_test_region == 0)
ddr_test_region = 0xb0000000;
else if (ddr_test_region == 0)
ddr_test_region = 0x40000000;
/*
* region2 outbound used to access rc/ep mem
* in imx6 pcie ep/rc validation system
*/
writel(2, pp->dbi_base + 0x900);
writel(pp->mem_base, pp->dbi_base + 0x90c);
writel(0, pp->dbi_base + 0x910);
writel(pp->mem_base + test_region_size, pp->dbi_base + 0x914);
writel(ddr_test_region, pp->dbi_base + 0x918);
writel(0, pp->dbi_base + 0x91c);
writel(0, pp->dbi_base + 0x904);
writel(1 << 31, pp->dbi_base + 0x908);
}
static ssize_t imx_pcie_memw_info(struct device *dev,
struct device_attribute *devattr, char *buf)
{
return sprintf(buf, "imx-pcie-rc-memw-info start 0x%08x, size 0x%08x\n",
ddr_test_region, test_region_size);
}
static ssize_t
imx_pcie_memw_start(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
u32 memw_start;
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
sscanf(buf, "%x\n", &memw_start);
if (is_imx6sx_pcie(imx6_pcie)) {
if (memw_start < 0x80000000 || memw_start > 0xb0000000) {
dev_err(dev, "Invalid imx6sx sdb memory start addr.\n");
dev_info(dev, "e.x: echo 0xb1000000 > /sys/...");
return -1;
}
} else {
if (memw_start < 0x10000000 || memw_start > 0x40000000) {
dev_err(dev, "Invalid imx6q sd memory start addr.\n");
dev_info(dev, "e.x: echo 0xb1000000 > /sys/...");
return -1;
}
}
if (ddr_test_region != memw_start) {
ddr_test_region = memw_start;
imx_pcie_regions_setup(dev);
}
return count;
}
static ssize_t
imx_pcie_memw_size(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
u32 memw_size;
sscanf(buf, "%x\n", &memw_size);
if ((memw_size > (SZ_16M - SZ_1M)) || (memw_size < SZ_64K)) {
dev_err(dev, "Invalid, should be [SZ_64K,SZ_16M - SZ_1MB].\n");
dev_info(dev, "For example: echo 0x800000 > /sys/...");
return -1;
}
if (test_region_size != memw_size) {
test_region_size = memw_size;
imx_pcie_regions_setup(dev);
}
return count;
}
static DEVICE_ATTR(memw_info, S_IRUGO, imx_pcie_memw_info, NULL);
static DEVICE_ATTR(memw_start_set, S_IWUGO, NULL, imx_pcie_memw_start);
static DEVICE_ATTR(memw_size_set, S_IWUGO, NULL, imx_pcie_memw_size);
static DEVICE_ATTR(ep_bar0_addr, S_IRWXUGO, imx_pcie_bar0_addr_info,
imx_pcie_bar0_addr_start);
static struct attribute *imx_pcie_attrs[] = {
/*
* The start address, and the limitation (64KB ~ (16MB - 1MB))
* of the ddr mem window reserved by RC, and used for EP to access.
* BTW, these attrs are only configured at EP side.
*/
&dev_attr_memw_info.attr,
&dev_attr_memw_start_set.attr,
&dev_attr_memw_size_set.attr,
&dev_attr_ep_bar0_addr.attr,
NULL
};
static struct attribute_group imx_pcie_attrgroup = {
.attrs = imx_pcie_attrs,
};
static void imx6_pcie_setup_ep(struct pcie_port *pp)
{
/* CMD reg:I/O space, MEM space, and Bus Master Enable */
writel(readl(pp->dbi_base + PCI_COMMAND)
| PCI_COMMAND_IO
| PCI_COMMAND_MEMORY
| PCI_COMMAND_MASTER,
pp->dbi_base + PCI_COMMAND);
/*
* configure the class_rev(emaluate one memory ram ep device),
* bar0 and bar1 of ep
*/
writel(0xdeadbeaf, pp->dbi_base + PCI_VENDOR_ID);
writel(readl(pp->dbi_base + PCI_CLASS_REVISION)
| (PCI_CLASS_MEMORY_RAM << 16),
pp->dbi_base + PCI_CLASS_REVISION);
writel(0xdeadbeaf, pp->dbi_base
+ PCI_SUBSYSTEM_VENDOR_ID);
/* 32bit none-prefetchable 8M bytes memory on bar0 */
writel(0x0, pp->dbi_base + PCI_BASE_ADDRESS_0);
writel(SZ_8M - 1, pp->dbi_base + (1 << 12)
+ PCI_BASE_ADDRESS_0);
/* None used bar1 */
writel(0x0, pp->dbi_base + PCI_BASE_ADDRESS_1);
writel(0, pp->dbi_base + (1 << 12) + PCI_BASE_ADDRESS_1);
/* 4K bytes IO on bar2 */
writel(0x1, pp->dbi_base + PCI_BASE_ADDRESS_2);
writel(SZ_4K - 1, pp->dbi_base + (1 << 12) +
PCI_BASE_ADDRESS_2);
/*
* 32bit prefetchable 1M bytes memory on bar3
* FIXME BAR MASK3 is not changable, the size
* is fixed to 256 bytes.
*/
writel(0x8, pp->dbi_base + PCI_BASE_ADDRESS_3);
writel(SZ_1M - 1, pp->dbi_base + (1 << 12)
+ PCI_BASE_ADDRESS_3);
/*
* 64bit prefetchable 1M bytes memory on bar4-5.
* FIXME BAR4,5 are not enabled yet
*/
writel(0xc, pp->dbi_base + PCI_BASE_ADDRESS_4);
writel(SZ_1M - 1, pp->dbi_base + (1 << 12)
+ PCI_BASE_ADDRESS_4);
writel(0, pp->dbi_base + (1 << 12) + PCI_BASE_ADDRESS_5);
}
#ifdef CONFIG_PM_SLEEP
static int pci_imx_suspend_noirq(struct device *dev)
{
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
struct pcie_port *pp = &imx6_pcie->pp;
if (is_imx6sx_pcie(imx6_pcie)) {
if (IS_ENABLED(CONFIG_PCI_MSI))
dw_pcie_msi_cfg_store(pp);
if (IS_ENABLED(CONFIG_PCI_IMX6SX_EXTREMELY_PWR_SAVE)) {
/* PM_TURN_OFF */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
udelay(10);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
/* Disable clks and power down PCIe PHY */
clk_disable_unprepare(imx6_pcie->pcie);
if (!IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS)
&& !IS_ENABLED(CONFIG_RC_MODE_IN_EP_RC_SYS))
clk_disable_unprepare(imx6_pcie->pcie_bus);
clk_disable_unprepare(imx6_pcie->pcie_phy);
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
release_bus_freq(BUS_FREQ_HIGH);
/*
* Power down PCIe PHY.
*/
regulator_disable(imx6_pcie->pcie_phy_regulator);
} else {
/* PM_TURN_OFF */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF,
IMX6SX_GPR12_PCIE_PM_TURN_OFF);
udelay(10);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
clk_disable_unprepare(imx6_pcie->pcie);
clk_disable_unprepare(imx6_pcie->pcie_bus);
clk_disable_unprepare(imx6_pcie->pcie_phy);
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
release_bus_freq(BUS_FREQ_HIGH);
}
} else {
/*
* L2 can exit by 'reset' or Inband beacon (from remote EP)
* toggling phy_powerdown has same effect as 'inband beacon'
* So, toggle bit18 of GPR1, used as a workaround of errata
* "PCIe PCIe does not support L2 Power Down"
*/
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD,
IMX6Q_GPR1_PCIE_TEST_PD);
}
return 0;
}
static int pci_imx_resume_noirq(struct device *dev)
{
int ret = 0;
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
struct pcie_port *pp = &imx6_pcie->pp;
if (is_imx6sx_pcie(imx6_pcie)) {
if (IS_ENABLED(CONFIG_PCI_IMX6SX_EXTREMELY_PWR_SAVE)) {
imx6_pcie_assert_core_reset(pp);
ret = imx6_pcie_init_phy(pp);
if (ret < 0)
return ret;
ret = imx6_pcie_deassert_core_reset(pp);
if (ret < 0)
return ret;
if (IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS))
imx6_pcie_setup_ep(pp);
else
dw_pcie_setup_rc(pp);
if (IS_ENABLED(CONFIG_PCI_MSI))
dw_pcie_msi_cfg_restore(pp);
/* Start LTSSM. */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2,
IMX6Q_GPR12_PCIE_CTL_2);
} else {
request_bus_freq(BUS_FREQ_HIGH);
clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
clk_prepare_enable(imx6_pcie->pcie_bus);
clk_prepare_enable(imx6_pcie->pcie_phy);
clk_prepare_enable(imx6_pcie->pcie);
/* Reset iMX6SX PCIe */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_PERST,
IMX6SX_GPR5_PCIE_PERST);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_PERST, 0);
/*
* controller maybe turn off, re-configure again
*/
dw_pcie_setup_rc(pp);
if (IS_ENABLED(CONFIG_PCI_MSI))
dw_pcie_msi_cfg_restore(pp);
}
} else {
/*
* L2 can exit by 'reset' or Inband beacon (from remote EP)
* toggling phy_powerdown has same effect as 'inband beacon'
* So, toggle bit18 of GPR1, used as a workaround of errata
* "PCIe PCIe does not support L2 Power Down"
*/
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0);
}
return 0;
}
static const struct dev_pm_ops pci_imx_pm_ops = {
.suspend_noirq = pci_imx_suspend_noirq,
.resume_noirq = pci_imx_resume_noirq,
.freeze_noirq = pci_imx_suspend_noirq,
.thaw_noirq = pci_imx_resume_noirq,
.poweroff_noirq = pci_imx_suspend_noirq,
.restore_noirq = pci_imx_resume_noirq,
};
#endif
static int __init imx6_pcie_probe(struct platform_device *pdev)
{
struct imx6_pcie *imx6_pcie;
struct pcie_port *pp;
struct device_node *np = pdev->dev.of_node;
struct resource *dbi_base;
int ret;
imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
if (!imx6_pcie)
return -ENOMEM;
pp = &imx6_pcie->pp;
pp->dev = &pdev->dev;
if (IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS)) {
/* add attributes for device */
ret = sysfs_create_group(&pdev->dev.kobj, &imx_pcie_attrgroup);
if (ret)
return -EINVAL;
}
/* Added for PCI abort handling */
hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
if (IS_ERR(pp->dbi_base))
return PTR_ERR(pp->dbi_base);
/* Fetch GPIOs */
imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio,
GPIOF_OUT_INIT_LOW, "PCIe reset");
if (ret) {
dev_err(&pdev->dev, "unable to get reset gpio\n");
return ret;
}
}
imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
ret = devm_gpio_request_one(&pdev->dev,
imx6_pcie->power_on_gpio,
GPIOF_OUT_INIT_LOW,
"PCIe power enable");
if (ret) {
dev_err(&pdev->dev, "unable to get power-on gpio\n");
return ret;
}
}
/* Fetch clocks */
imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");
if (IS_ERR(imx6_pcie->pcie_phy)) {
dev_err(&pdev->dev,
"pcie_phy clock source missing or invalid\n");
return PTR_ERR(imx6_pcie->pcie_phy);
}
imx6_pcie->pcie_bus = devm_clk_get(&pdev->dev, "pcie_bus");
if (IS_ERR(imx6_pcie->pcie_bus)) {
dev_err(&pdev->dev,
"pcie_bus clock source missing or invalid\n");
return PTR_ERR(imx6_pcie->pcie_bus);
}
imx6_pcie->pcie = devm_clk_get(&pdev->dev, "pcie");
if (IS_ERR(imx6_pcie->pcie)) {
dev_err(&pdev->dev,
"pcie clock source missing or invalid\n");
return PTR_ERR(imx6_pcie->pcie);
}
if (is_imx6sx_pcie(imx6_pcie)) {
imx6_pcie->pcie_inbound_axi = devm_clk_get(&pdev->dev,
"pcie_inbound_axi");
if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
dev_err(&pdev->dev,
"pcie clock source missing or invalid\n");
return PTR_ERR(imx6_pcie->pcie_inbound_axi);
}
imx6_pcie->pcie_phy_regulator = devm_regulator_get(pp->dev,
"pcie-phy");
imx6_pcie->iomuxc_gpr =
syscon_regmap_lookup_by_compatible
("fsl,imx6sx-iomuxc-gpr");
} else {
/* sata_ref is not used by pcie on imx6sx */
imx6_pcie->ref_100m = devm_clk_get(&pdev->dev, "ref_100m");
if (IS_ERR(imx6_pcie->ref_100m)) {
dev_err(&pdev->dev,
"ref_100m clock source missing or invalid\n");
return PTR_ERR(imx6_pcie->ref_100m);
}
imx6_pcie->iomuxc_gpr =
syscon_regmap_lookup_by_compatible
("fsl,imx6q-iomuxc-gpr");
}
if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
dev_err(&pdev->dev, "unable to find iomuxc registers\n");
return PTR_ERR(imx6_pcie->iomuxc_gpr);
}
if (IS_ENABLED(CONFIG_EP_MODE_IN_EP_RC_SYS)) {
int i;
void *test_reg1, *test_reg2;
void __iomem *pcie_arb_base_addr;
struct timeval tv1, tv2, tv3;
u32 tv_count1, tv_count2;
struct device_node *np = pp->dev->of_node;
struct of_pci_range range;
struct of_pci_range_parser parser;
unsigned long restype;
if (of_pci_range_parser_init(&parser, np)) {
dev_err(pp->dev, "missing ranges property\n");
return -EINVAL;
}
/* Get the memory ranges from DT */
for_each_of_pci_range(&parser, &range) {
restype = range.flags & IORESOURCE_TYPE_BITS;
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range,
np, &pp->mem);
pp->mem.name = "MEM";
}
}
pp->mem_base = pp->mem.start;
imx6_pcie_assert_core_reset(pp);
ret = imx6_pcie_init_phy(pp);
ret |= imx6_pcie_deassert_core_reset(pp);
if (ret < 0) {
dev_err(&pdev->dev, "unable to init pcie ep.\n");
return ret;
}
/*
* iMX6SX PCIe has the stand-alone power domain.
* refer to the initialization for iMX6SX PCIe,
* release the PCIe PHY reset here,
* before LTSSM enable is set
* .
*/
if (is_imx6sx_pcie(imx6_pcie))
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
BIT(19), 0 << 19);
/* assert LTSSM enable */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
dev_info(&pdev->dev, "PCIe EP: waiting for link up...\n");
platform_set_drvdata(pdev, imx6_pcie);
/* link is indicated by the bit4 of DB_R1 register */
do {
usleep_range(10, 20);
} while ((readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & 0x10) == 0);
imx6_pcie_setup_ep(pp);
imx_pcie_regions_setup(&pdev->dev);
/* self io test */
test_reg1 = devm_kzalloc(&pdev->dev,
test_region_size, GFP_KERNEL);
if (!test_reg1) {
pr_err("pcie ep: can't alloc the test reg1.\n");
ret = PTR_ERR(test_reg1);
goto err;
}
test_reg2 = devm_kzalloc(&pdev->dev,
test_region_size, GFP_KERNEL);
if (!test_reg2) {
pr_err("pcie ep: can't alloc the test reg2.\n");
ret = PTR_ERR(test_reg1);
goto err;
}
pcie_arb_base_addr = ioremap_cache(pp->mem_base,
test_region_size);
if (!pcie_arb_base_addr) {
pr_err("error with ioremap in ep selftest\n");
ret = PTR_ERR(pcie_arb_base_addr);
goto err;
}
for (i = 0; i < test_region_size; i = i + 4) {
writel(0xE6600D00 + i, test_reg1 + i);
writel(0xDEADBEAF, test_reg2 + i);
}
/* PCIe EP start the data transfer after link up */
pr_info("pcie ep: Starting data transfer...\n");
do_gettimeofday(&tv1);
memcpy((unsigned long *)pcie_arb_base_addr,
(unsigned long *)test_reg1,
test_region_size);
do_gettimeofday(&tv2);
memcpy((unsigned long *)test_reg2,
(unsigned long *)pcie_arb_base_addr,
test_region_size);
do_gettimeofday(&tv3);
if (memcmp(test_reg2, test_reg1, test_region_size) == 0) {
tv_count1 = (tv2.tv_sec - tv1.tv_sec)
* USEC_PER_SEC
+ tv2.tv_usec - tv1.tv_usec;
tv_count2 = (tv3.tv_sec - tv2.tv_sec)
* USEC_PER_SEC
+ tv3.tv_usec - tv2.tv_usec;
pr_info("pcie ep: Data transfer is successful."
" tv_count1 %dus,"
" tv_count2 %dus.\n",
tv_count1, tv_count2);
pr_info("pcie ep: Data write speed:%ldMB/s.\n",
((test_region_size/1024)
* MSEC_PER_SEC)
/(tv_count1));
pr_info("pcie ep: Data read speed:%ldMB/s.\n",
((test_region_size/1024)
* MSEC_PER_SEC)
/(tv_count2));
} else {
pr_info("pcie ep: Data transfer is failed.\n");
} /* end of self io test. */
} else {
ret = imx6_add_pcie_port(pp, pdev);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, imx6_pcie);
if (IS_ENABLED(CONFIG_RC_MODE_IN_EP_RC_SYS))
imx_pcie_regions_setup(&pdev->dev);
}
return 0;
err:
return ret;
}
static void imx6_pcie_shutdown(struct platform_device *pdev)
{
struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
/* bring down link, so bootloader gets clean state in case of reboot */
imx6_pcie_assert_core_reset(&imx6_pcie->pp);
}
static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx6q-pcie", },
{ .compatible = "fsl,imx6sx-pcie", },
{},
};
MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
static struct platform_driver imx6_pcie_driver = {
.driver = {
.name = "imx6q-pcie",
.owner = THIS_MODULE,
.of_match_table = imx6_pcie_of_match,
.pm = &pci_imx_pm_ops,
},
.shutdown = imx6_pcie_shutdown,
};
/* Freescale PCIe driver does not allow module unload */
static int __init imx6_pcie_init(void)
{
return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
}
module_init(imx6_pcie_init);
MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
MODULE_LICENSE("GPL v2");