/*
   * Generic Generic NCR5380 driver
   *	
   * Copyright 1993, Drew Eckhardt
   *	Visionary Computing
   *	(Unix and Linux consulting and custom programming)
   *	drew@colorado.edu
   *      +1 (303) 440-4894
   *
   * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
   *    K.Lentin@cs.monash.edu.au
   *
   * NCR53C400A extensions (c) 1996, Ingmar Baumgart
   *    ingmar@gonzo.schwaben.de
   *
   * DTC3181E extensions (c) 1997, Ronald van Cuijlenborg
   * ronald.van.cuijlenborg@tip.nl or nutty@dds.nl
   *
   * Added ISAPNP support for DTC436 adapters,
   * Thomas Sailer, sailer@ife.ee.ethz.ch
   *
   * ALPHA RELEASE 1. 
   *
   * For more information, please consult 
   *
   * NCR 5380 Family
   * SCSI Protocol Controller
   * Databook
   *
   * NCR Microelectronics
   * 1635 Aeroplaza Drive
   * Colorado Springs, CO 80916
   * 1+ (719) 578-3400
   * 1+ (800) 334-5454
   */
  
  /* 
   * TODO : flesh out DMA support, find some one actually using this (I have
   * 	a memory mapped Trantor board that works fine)
   */
  
  /*
   * Options :
   *
   * PARITY - enable parity checking.  Not supported.
   *
   * SCSI2 - enable support for SCSI-II tagged queueing.  Untested.
   *
   * USLEEP - enable support for devices that don't disconnect.  Untested.
   *
   * The card is detected and initialized in one of several ways : 
   * 1.  With command line overrides - NCR5380=port,irq may be 
   *     used on the LILO command line to override the defaults.
   *
   * 2.  With the GENERIC_NCR5380_OVERRIDE compile time define.  This is 
   *     specified as an array of address, irq, dma, board tuples.  Ie, for
   *     one board at 0x350, IRQ5, no dma, I could say  
   *     -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}}
   * 
   * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an 
   * 	IRQ line if overridden on the command line.
   *
   * 3.  When included as a module, with arguments passed on the command line:
   *         ncr_irq=xx	the interrupt
   *         ncr_addr=xx  the port or base address (for port or memory
   *              	mapped, resp.)
   *         ncr_dma=xx	the DMA
   *         ncr_5380=1	to set up for a NCR5380 board
   *         ncr_53c400=1	to set up for a NCR53C400 board
   *     e.g.
   *     modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
   *       for a port mapped NCR5380 board or
   *     modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
   *       for a memory mapped NCR53C400 board with interrupts disabled.
   * 
   * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an 
   * 	IRQ line if overridden on the command line.
   *     
   */
  
  /*
   * $Log: generic_NCR5380.c,v $
   */
  
  /* settings for DTC3181E card with only Mustek scanner attached */
  #define USLEEP
  #define USLEEP_POLL	1
  #define USLEEP_SLEEP	20
  #define USLEEP_WAITLONG	500
  
  #define AUTOPROBE_IRQ
  #define AUTOSENSE
  
  
  #ifdef CONFIG_SCSI_GENERIC_NCR53C400
  #define NCR53C400_PSEUDO_DMA 1
  #define PSEUDO_DMA
  #define NCR53C400
  #define NCR5380_STATS
  #undef NCR5380_STAT_LIMIT
  #endif
  
  #include <asm/io.h>
  #include <linux/signal.h>
  #include <linux/blkdev.h>
  #include "scsi.h"
  #include <scsi/scsi_host.h>
  #include "g_NCR5380.h"
  #include "NCR5380.h"
  #include <linux/stat.h>
  #include <linux/init.h>
  #include <linux/ioport.h>
  #include <linux/isapnp.h>
  #include <linux/delay.h>
  #include <linux/interrupt.h>
  
  #define NCR_NOT_SET 0
  static int ncr_irq = NCR_NOT_SET;
  static int ncr_dma = NCR_NOT_SET;
  static int ncr_addr = NCR_NOT_SET;
  static int ncr_5380 = NCR_NOT_SET;
  static int ncr_53c400 = NCR_NOT_SET;
  static int ncr_53c400a = NCR_NOT_SET;
  static int dtc_3181e = NCR_NOT_SET;
  
  static struct override {
  	NCR5380_map_type NCR5380_map_name;
  	int irq;
  	int dma;
  	int board;		/* Use NCR53c400, Ricoh, etc. extensions ? */
  } overrides
  #ifdef GENERIC_NCR5380_OVERRIDE
  [] __initdata = GENERIC_NCR5380_OVERRIDE;
  #else
  [1] __initdata = { { 0,},};
  #endif
  
  #define NO_OVERRIDES ARRAY_SIZE(overrides)
  
  #ifndef MODULE
  
  /**
   *	internal_setup		-	handle lilo command string override
   *	@board:	BOARD_* identifier for the board
   *	@str: unused
   *	@ints: numeric parameters
   *
   * 	Do LILO command line initialization of the overrides array. Display
   *	errors when needed
   *
   *	Locks: none
   */
  
  static void __init internal_setup(int board, char *str, int *ints)
  {
  	static int commandline_current = 0;
  	switch (board) {
  	case BOARD_NCR5380:
  		if (ints[0] != 2 && ints[0] != 3) {
  			printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma
  ");
  			return;
  		}
  		break;
  	case BOARD_NCR53C400:
  		if (ints[0] != 2) {
  			printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq
  ");
  			return;
  		}
  		break;
  	case BOARD_NCR53C400A:
  		if (ints[0] != 2) {
  			printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq
  ");
  			return;
  		}
  		break;
  	case BOARD_DTC3181E:
  		if (ints[0] != 2) {
  			printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq
  ");
  			return;
  		}
  		break;
  	}
  
  	if (commandline_current < NO_OVERRIDES) {
  		overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
  		overrides[commandline_current].irq = ints[2];
  		if (ints[0] == 3)
  			overrides[commandline_current].dma = ints[3];
  		else
  			overrides[commandline_current].dma = DMA_NONE;
  		overrides[commandline_current].board = board;
  		++commandline_current;
  	}
  }
  
  
  /**
   * 	do_NCR53C80_setup		-	set up entry point
   *	@str: unused
   *
   *	Setup function invoked at boot to parse the ncr5380= command
   *	line.
   */
  
  static int __init do_NCR5380_setup(char *str)
  {
  	int ints[10];
  
  	get_options(str, ARRAY_SIZE(ints), ints);
  	internal_setup(BOARD_NCR5380, str, ints);
  	return 1;
  }
  
  /**
   * 	do_NCR53C400_setup		-	set up entry point
   *	@str: unused
   *	@ints: integer parameters from kernel setup code
   *
   *	Setup function invoked at boot to parse the ncr53c400= command
   *	line.
   */
  
  static int __init do_NCR53C400_setup(char *str)
  {
  	int ints[10];
  
  	get_options(str, ARRAY_SIZE(ints), ints);
  	internal_setup(BOARD_NCR53C400, str, ints);
  	return 1;
  }
  
  /**
   * 	do_NCR53C400A_setup	-	set up entry point
   *	@str: unused
   *	@ints: integer parameters from kernel setup code
   *
   *	Setup function invoked at boot to parse the ncr53c400a= command
   *	line.
   */
  
  static int __init do_NCR53C400A_setup(char *str)
  {
  	int ints[10];
  
  	get_options(str, ARRAY_SIZE(ints), ints);
  	internal_setup(BOARD_NCR53C400A, str, ints);
  	return 1;
  }
  
  /**
   * 	do_DTC3181E_setup	-	set up entry point
   *	@str: unused
   *	@ints: integer parameters from kernel setup code
   *
   *	Setup function invoked at boot to parse the dtc3181e= command
   *	line.
   */
  
  static int __init do_DTC3181E_setup(char *str)
  {
  	int ints[10];
  
  	get_options(str, ARRAY_SIZE(ints), ints);
  	internal_setup(BOARD_DTC3181E, str, ints);
  	return 1;
  }
  
  #endif
  
  /**
   * 	generic_NCR5380_detect	-	look for NCR5380 controllers
   *	@tpnt: the scsi template
   *
   *	Scan for the present of NCR5380, NCR53C400, NCR53C400A, DTC3181E
   *	and DTC436(ISAPnP) controllers. If overrides have been set we use
   *	them.
   *
   *	The caller supplied NCR5380_init function is invoked from here, before
   *	the interrupt line is taken.
   *
   *	Locks: none
   */
  
  int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
  {
  	static int current_override = 0;
  	int count;
  	unsigned int *ports;
  #ifndef SCSI_G_NCR5380_MEM
  	int i;
  	unsigned long region_size = 16;
  #endif
  	static unsigned int __initdata ncr_53c400a_ports[] = {
  		0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
  	};
  	static unsigned int __initdata dtc_3181e_ports[] = {
  		0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
  	};
  	int flags = 0;
  	struct Scsi_Host *instance;
  #ifdef SCSI_G_NCR5380_MEM
  	unsigned long base;
  	void __iomem *iomem;
  #endif
  
  	if (ncr_irq != NCR_NOT_SET)
  		overrides[0].irq = ncr_irq;
  	if (ncr_dma != NCR_NOT_SET)
  		overrides[0].dma = ncr_dma;
  	if (ncr_addr != NCR_NOT_SET)
  		overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
  	if (ncr_5380 != NCR_NOT_SET)
  		overrides[0].board = BOARD_NCR5380;
  	else if (ncr_53c400 != NCR_NOT_SET)
  		overrides[0].board = BOARD_NCR53C400;
  	else if (ncr_53c400a != NCR_NOT_SET)
  		overrides[0].board = BOARD_NCR53C400A;
  	else if (dtc_3181e != NCR_NOT_SET)
  		overrides[0].board = BOARD_DTC3181E;
  #ifndef SCSI_G_NCR5380_MEM
  	if (!current_override && isapnp_present()) {
  		struct pnp_dev *dev = NULL;
  		count = 0;
  		while ((dev = pnp_find_dev(NULL, ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e), dev))) {
  			if (count >= NO_OVERRIDES)
  				break;
  			if (pnp_device_attach(dev) < 0)
  				continue;
  			if (pnp_activate_dev(dev) < 0) {
  				printk(KERN_ERR "dtc436e probe: activate failed
  ");
  				pnp_device_detach(dev);
  				continue;
  			}
  			if (!pnp_port_valid(dev, 0)) {
  				printk(KERN_ERR "dtc436e probe: no valid port
  ");
  				pnp_device_detach(dev);
  				continue;
  			}
  			if (pnp_irq_valid(dev, 0))
  				overrides[count].irq = pnp_irq(dev, 0);
  			else
  				overrides[count].irq = SCSI_IRQ_NONE;
  			if (pnp_dma_valid(dev, 0))
  				overrides[count].dma = pnp_dma(dev, 0);
  			else
  				overrides[count].dma = DMA_NONE;
  			overrides[count].NCR5380_map_name = (NCR5380_map_type) pnp_port_start(dev, 0);
  			overrides[count].board = BOARD_DTC3181E;
  			count++;
  		}
  	}
  #endif
  	tpnt->proc_name = "g_NCR5380";
  
  	for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
  		if (!(overrides[current_override].NCR5380_map_name))
  			continue;
  
  		ports = NULL;
  		switch (overrides[current_override].board) {
  		case BOARD_NCR5380:
  			flags = FLAG_NO_PSEUDO_DMA;
  			break;
  		case BOARD_NCR53C400:
  			flags = FLAG_NCR53C400;
  			break;
  		case BOARD_NCR53C400A:
  			flags = FLAG_NO_PSEUDO_DMA;
  			ports = ncr_53c400a_ports;
  			break;
  		case BOARD_DTC3181E:
  			flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E;
  			ports = dtc_3181e_ports;
  			break;
  		}
  
  #ifndef SCSI_G_NCR5380_MEM
  		if (ports) {
  			/* wakeup sequence for the NCR53C400A and DTC3181E */
  
  			/* Disable the adapter and look for a free io port */
  			outb(0x59, 0x779);
  			outb(0xb9, 0x379);
  			outb(0xc5, 0x379);
  			outb(0xae, 0x379);
  			outb(0xa6, 0x379);
  			outb(0x00, 0x379);
  
  			if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
  				for (i = 0; ports[i]; i++) {
  					if (!request_region(ports[i],  16, "ncr53c80"))
  						continue;
  					if (overrides[current_override].NCR5380_map_name == ports[i])
  						break;
  					release_region(ports[i], 16);
  			} else
  				for (i = 0; ports[i]; i++) {
  					if (!request_region(ports[i],  16, "ncr53c80"))
  						continue;
  					if (inb(ports[i]) == 0xff)
  						break;
  					release_region(ports[i], 16);
  				}
  			if (ports[i]) {
  				/* At this point we have our region reserved */
  				outb(0x59, 0x779);
  				outb(0xb9, 0x379);
  				outb(0xc5, 0x379);
  				outb(0xae, 0x379);
  				outb(0xa6, 0x379);
  				outb(0x80 | i, 0x379);	/* set io port to be used */
  				outb(0xc0, ports[i] + 9);
  				if (inb(ports[i] + 9) != 0x80)
  					continue;
  				else
  					overrides[current_override].NCR5380_map_name = ports[i];
  			} else
  				continue;
  		}
  		else
  		{
  			/* Not a 53C400A style setup - just grab */
  			if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
  				continue;
  			region_size = NCR5380_region_size;
  		}
  #else
  		base = overrides[current_override].NCR5380_map_name;
  		if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
  			continue;
  		iomem = ioremap(base, NCR5380_region_size);
  		if (!iomem) {
  			release_mem_region(base, NCR5380_region_size);
  			continue;
  		}
  #endif
  		instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
  		if (instance == NULL) {
  #ifndef SCSI_G_NCR5380_MEM
  			release_region(overrides[current_override].NCR5380_map_name, region_size);
  #else
  			iounmap(iomem);
  			release_mem_region(base, NCR5380_region_size);
  #endif
  			continue;
  		}
  
  		instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
  #ifndef SCSI_G_NCR5380_MEM
  		instance->n_io_port = region_size;
  #else
  		((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
  #endif
  
  		NCR5380_init(instance, flags);
  
  		if (overrides[current_override].irq != IRQ_AUTO)
  			instance->irq = overrides[current_override].irq;
  		else
  			instance->irq = NCR5380_probe_irq(instance, 0xffff);
  
  		if (instance->irq != SCSI_IRQ_NONE)
  			if (request_irq(instance->irq, generic_NCR5380_intr,
  					IRQF_DISABLED, "NCR5380", instance)) {
  				printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled
  ", instance->host_no, instance->irq);
  				instance->irq = SCSI_IRQ_NONE;
  			}
  
  		if (instance->irq == SCSI_IRQ_NONE) {
  			printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,
  ", instance->host_no);
  			printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.
  ", instance->host_no);
  		}
  
  		printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
  		if (instance->irq == SCSI_IRQ_NONE)
  			printk(" interrupts disabled");
  		else
  			printk(" irq %d", instance->irq);
  		printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE);
  		NCR5380_print_options(instance);
  		printk("
  ");
  
  		++current_override;
  		++count;
  	}
  	return count;
  }
  
  /**
   *	generic_NCR5380_info	-	reporting string
   *	@host: NCR5380 to report on
   *
   *	Report driver information for the NCR5380
   */
   	
  const char *generic_NCR5380_info(struct Scsi_Host *host)
  {
  	static const char string[] = "Generic NCR5380/53C400 Driver";
  	return string;
  }
  
  /**
   *	generic_NCR5380_release_resources	-	free resources
   *	@instance: host adapter to clean up 
   *
   *	Free the generic interface resources from this adapter.
   *
   *	Locks: none
   */
   
  int generic_NCR5380_release_resources(struct Scsi_Host *instance)
  {
  	NCR5380_local_declare();
  	NCR5380_setup(instance);
  	
  	if (instance->irq != SCSI_IRQ_NONE)
  		free_irq(instance->irq, instance);
  	NCR5380_exit(instance);
  
  #ifndef SCSI_G_NCR5380_MEM
  	release_region(instance->NCR5380_instance_name, instance->n_io_port);
  #else
  	iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
  	release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
  #endif
  
  
  	return 0;
  }
  
  #ifdef BIOSPARAM
  /**
   *	generic_NCR5380_biosparam
   *	@disk: disk to compute geometry for
   *	@dev: device identifier for this disk
   *	@ip: sizes to fill in
   *
   *	Generates a BIOS / DOS compatible H-C-S mapping for the specified 
   *	device / size.
   * 
   * 	XXX Most SCSI boards use this mapping, I could be incorrect.  Someone
   *	using hard disks on a trantor should verify that this mapping
   *	corresponds to that used by the BIOS / ASPI driver by running the linux
   *	fdisk program and matching the H_C_S coordinates to what DOS uses.
   *
   *	Locks: none
   */
  
  static int
  generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  			  sector_t capacity, int *ip)
  {
  	ip[0] = 64;
  	ip[1] = 32;
  	ip[2] = capacity >> 11;
  	return 0;
  }
  #endif
  
  #ifdef NCR53C400_PSEUDO_DMA
  
  /**
   *	NCR5380_pread		-	pseudo DMA read
   *	@instance: adapter to read from
   *	@dst: buffer to read into
   *	@len: buffer length
   *
   *	Perform a pseudo DMA mode read from an NCR53C400 or equivalent
   *	controller
   */
   
  static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
  {
  	int blocks = len / 128;
  	int start = 0;
  	int bl;
  
  	NCR5380_local_declare();
  	NCR5380_setup(instance);
  
  	NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
  	NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
  	while (1) {
  		if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
  			break;
  		}
  		if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
  			printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d
  ", start, blocks);
  			return -1;
  		}
  		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
  
  #ifndef SCSI_G_NCR5380_MEM
  		{
  			int i;
  			for (i = 0; i < 128; i++)
  				dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
  		}
  #else
  		/* implies SCSI_G_NCR5380_MEM */
  		memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
  #endif
  		start += 128;
  		blocks--;
  	}
  
  	if (blocks) {
  		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
  		{
  			// FIXME - no timeout
  		}
  
  #ifndef SCSI_G_NCR5380_MEM
  		{
  			int i;	
  			for (i = 0; i < 128; i++)
  				dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
  		}
  #else
  		/* implies SCSI_G_NCR5380_MEM */
  		memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
  #endif
  		start += 128;
  		blocks--;
  	}
  
  	if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
  		printk("53C400r: no 53C80 gated irq after transfer");
  
  #if 0
  	/*
  	 *	DON'T DO THIS - THEY NEVER ARRIVE!
  	 */
  	printk("53C400r: Waiting for 53C80 registers
  ");
  	while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
  		;
  #endif
  	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
  		printk(KERN_ERR "53C400r: no end dma signal
  ");
  		
  	NCR5380_write(MODE_REG, MR_BASE);
  	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
  	return 0;
  }
  
  /**
   *	NCR5380_write		-	pseudo DMA write
   *	@instance: adapter to read from
   *	@dst: buffer to read into
   *	@len: buffer length
   *
   *	Perform a pseudo DMA mode read from an NCR53C400 or equivalent
   *	controller
   */
  
  static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
  {
  	int blocks = len / 128;
  	int start = 0;
  	int bl;
  	int i;
  
  	NCR5380_local_declare();
  	NCR5380_setup(instance);
  
  	NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
  	NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
  	while (1) {
  		if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
  			printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d
  ", start, blocks);
  			return -1;
  		}
  
  		if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
  			break;
  		}
  		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
  			; // FIXME - timeout
  #ifndef SCSI_G_NCR5380_MEM
  		{
  			for (i = 0; i < 128; i++)
  				NCR5380_write(C400_HOST_BUFFER, src[start + i]);
  		}
  #else
  		/* implies SCSI_G_NCR5380_MEM */
  		memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
  #endif
  		start += 128;
  		blocks--;
  	}
  	if (blocks) {
  		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
  			; // FIXME - no timeout
  
  #ifndef SCSI_G_NCR5380_MEM
  		{
  			for (i = 0; i < 128; i++)
  				NCR5380_write(C400_HOST_BUFFER, src[start + i]);
  		}
  #else
  		/* implies SCSI_G_NCR5380_MEM */
  		memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
  #endif
  		start += 128;
  		blocks--;
  	}
  
  #if 0
  	printk("53C400w: waiting for registers to be available
  ");
  	THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
  	printk("53C400w: Got em
  ");
  #endif
  
  	/* Let's wait for this instead - could be ugly */
  	/* All documentation says to check for this. Maybe my hardware is too
  	 * fast. Waiting for it seems to work fine! KLL
  	 */
  	while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
  		;	// FIXME - no timeout
  
  	/*
  	 * I know. i is certainly != 0 here but the loop is new. See previous
  	 * comment.
  	 */
  	if (i) {
  		if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
  			printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x
  ", i);
  	} else
  		printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)
  ");
  
  #if 0
  	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
  		printk(KERN_ERR "53C400w: no end dma signal
  ");
  	}
  #endif
  	while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
  		; 	// TIMEOUT
  	return 0;
  }
  #endif				/* PSEUDO_DMA */
  
  /*
   *	Include the NCR5380 core code that we build our driver around	
   */
   
  #include "NCR5380.c"
  
  #define PRINTP(x) seq_printf(m, x)
  #define ANDP ,
  
  static void sprint_opcode(struct seq_file *m, int opcode)
  {
  	PRINTP("0x%02x " ANDP opcode);
  }
  
  static void sprint_command(struct seq_file *m, unsigned char *command)
  {
  	int i, s;
  	sprint_opcode(m, command[0]);
  	for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
  		PRINTP("%02x " ANDP command[i]);
  	PRINTP("
  ");
  }
  
  /**
   *	sprintf_Scsi_Cmnd	-	print a scsi command
   *	@m: seq_fil to print into
   *	@cmd: SCSI command block
   *	
   *	Print out the target and command data in hex
   */
  
  static void sprint_Scsi_Cmnd(struct seq_file *m, Scsi_Cmnd * cmd)
  {
  	PRINTP("host number %d destination target %d, lun %d
  " ANDP cmd->device->host->host_no ANDP cmd->device->id ANDP cmd->device->lun);
  	PRINTP("        command = ");
  	sprint_command(m, cmd->cmnd);
  }
  
  /**
   *	generic_NCR5380_proc_info	-	/proc for NCR5380 driver
   *	@buffer: buffer to print into
   *	@start: start position
   *	@offset: offset into buffer
   *	@len: length
   *	@hostno: instance to affect
   *	@inout: read/write
   *
   *	Provide the procfs information for the 5380 controller. We fill
   *	this with useful debugging information including the commands
   *	being executed, disconnected command queue and the statistical
   *	data
   *
   *	Locks: global cli/lock for queue walk
   */
   
  static int generic_NCR5380_show_info(struct seq_file *m, struct Scsi_Host *scsi_ptr)
  {
  	NCR5380_local_declare();
  	unsigned long flags;
  	unsigned char status;
  	int i;
  	Scsi_Cmnd *ptr;
  	struct NCR5380_hostdata *hostdata;
  #ifdef NCR5380_STATS
  	struct scsi_device *dev;
  #endif
  
  	NCR5380_setup(scsi_ptr);
  	hostdata = (struct NCR5380_hostdata *) scsi_ptr->hostdata;
  
  	spin_lock_irqsave(scsi_ptr->host_lock, flags);
  	PRINTP("SCSI host number %d : %s
  " ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name);
  	PRINTP("Generic NCR5380 driver version %d
  " ANDP GENERIC_NCR5380_PUBLIC_RELEASE);
  	PRINTP("NCR5380 core version %d
  " ANDP NCR5380_PUBLIC_RELEASE);
  #ifdef NCR53C400
  	PRINTP("NCR53C400 extension version %d
  " ANDP NCR53C400_PUBLIC_RELEASE);
  	PRINTP("NCR53C400 card%s detected
  " ANDP(((struct NCR5380_hostdata *) scsi_ptr->hostdata)->flags & FLAG_NCR53C400) ? "" : " not");
  # if NCR53C400_PSEUDO_DMA
  	PRINTP("NCR53C400 pseudo DMA used
  ");
  # endif
  #else
  	PRINTP("NO NCR53C400 driver extensions
  ");
  #endif
  	PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
  	if (scsi_ptr->irq == SCSI_IRQ_NONE)
  		PRINTP("no interrupt
  ");
  	else
  		PRINTP("on interrupt %d
  " ANDP scsi_ptr->irq);
  
  #ifdef NCR5380_STATS
  	if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue)
  		PRINTP("There are commands pending, transfer rates may be crud
  ");
  	if (hostdata->pendingr)
  		PRINTP("  %d pending reads" ANDP hostdata->pendingr);
  	if (hostdata->pendingw)
  		PRINTP("  %d pending writes" ANDP hostdata->pendingw);
  	if (hostdata->pendingr || hostdata->pendingw)
  		PRINTP("
  ");
  	shost_for_each_device(dev, scsi_ptr) {
  		unsigned long br = hostdata->bytes_read[dev->id];
  		unsigned long bw = hostdata->bytes_write[dev->id];
  		long tr = hostdata->time_read[dev->id] / HZ;
  		long tw = hostdata->time_write[dev->id] / HZ;
  
  		PRINTP("  T:%d %s " ANDP dev->id ANDP scsi_device_type(dev->type));
  		for (i = 0; i < 8; i++)
  			if (dev->vendor[i] >= 0x20)
  				seq_putc(m, dev->vendor[i]);
  		seq_putc(m, ' ');
  		for (i = 0; i < 16; i++)
  			if (dev->model[i] >= 0x20)
  				seq_putc(m, dev->model[i]);
  		seq_putc(m, ' ');
  		for (i = 0; i < 4; i++)
  			if (dev->rev[i] >= 0x20)
  				seq_putc(m, dev->rev[i]);
  		seq_putc(m, ' ');
  
  		PRINTP("
  %10ld kb read    in %5ld secs" ANDP br / 1024 ANDP tr);
  		if (tr)
  			PRINTP(" @ %5ld bps" ANDP br / tr);
  
  		PRINTP("
  %10ld kb written in %5ld secs" ANDP bw / 1024 ANDP tw);
  		if (tw)
  			PRINTP(" @ %5ld bps" ANDP bw / tw);
  		PRINTP("
  ");
  	}
  #endif
  
  	status = NCR5380_read(STATUS_REG);
  	if (!(status & SR_REQ))
  		PRINTP("REQ not asserted, phase unknown.
  ");
  	else {
  		for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
  		PRINTP("Phase %s
  " ANDP phases[i].name);
  	}
  
  	if (!hostdata->connected) {
  		PRINTP("No currently connected command
  ");
  	} else {
  		sprint_Scsi_Cmnd(m, (Scsi_Cmnd *) hostdata->connected);
  	}
  
  	PRINTP("issue_queue
  ");
  
  	for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
  		sprint_Scsi_Cmnd(m, ptr);
  
  	PRINTP("disconnected_queue
  ");
  
  	for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
  		sprint_Scsi_Cmnd(m, ptr);
  
  	spin_unlock_irqrestore(scsi_ptr->host_lock, flags);
  	return 0;
  }
  
  #undef PRINTP
  #undef ANDP
  
  static struct scsi_host_template driver_template = {
  	.show_info      	= generic_NCR5380_show_info,
  	.name           	= "Generic NCR5380/NCR53C400 Scsi Driver",
  	.detect         	= generic_NCR5380_detect,
  	.release        	= generic_NCR5380_release_resources,
  	.info           	= generic_NCR5380_info,
  	.queuecommand   	= generic_NCR5380_queue_command,
  	.eh_abort_handler	= generic_NCR5380_abort,
  	.eh_bus_reset_handler	= generic_NCR5380_bus_reset,
  	.bios_param     	= NCR5380_BIOSPARAM,
  	.can_queue      	= CAN_QUEUE,
          .this_id        	= 7,
          .sg_tablesize   	= SG_ALL,
  	.cmd_per_lun    	= CMD_PER_LUN,
          .use_clustering		= DISABLE_CLUSTERING,
  };
  #include <linux/module.h>
  #include "scsi_module.c"
  
  module_param(ncr_irq, int, 0);
  module_param(ncr_dma, int, 0);
  module_param(ncr_addr, int, 0);
  module_param(ncr_5380, int, 0);
  module_param(ncr_53c400, int, 0);
  module_param(ncr_53c400a, int, 0);
  module_param(dtc_3181e, int, 0);
  MODULE_LICENSE("GPL");
  
  #ifndef SCSI_G_NCR5380_MEM
  static struct isapnp_device_id id_table[] = {
  	{
  	 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
  	 ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e),
  	 0},
  	{0}
  };
  
  MODULE_DEVICE_TABLE(isapnp, id_table);
  #endif
  
  __setup("ncr5380=", do_NCR5380_setup);
  __setup("ncr53c400=", do_NCR53C400_setup);
  __setup("ncr53c400a=", do_NCR53C400A_setup);
  __setup("dtc3181e=", do_DTC3181E_setup);