/*
   * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   * Copyright (C) 2015 Falinux
   *
   * Configuration settings for the Boundary Devices Nitrogen6X
   * and Freescale i.MX6Q Sabre Lite boards.
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  #include "mx6_common.h"
  #define CONFIG_MX6
  #define CONFIG_DISPLAY_CPUINFO
  #define CONFIG_DISPLAY_BOARDINFO
  
  #define CONFIG_MACH_TYPE	3769
  
  #include <asm/arch/imx-regs.h>
  #include <asm/imx-common/gpio.h>
  
  #define CONFIG_CMDLINE_TAG
  #define CONFIG_SETUP_MEMORY_TAGS
  #define CONFIG_INITRD_TAG
  #define CONFIG_REVISION_TAG
  #define CONFIG_SYS_GENERIC_BOARD
  
  /* Size of malloc() pool */
  #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
  
  #define CONFIG_BOARD_EARLY_INIT_F
  #define CONFIG_MISC_INIT_R
  #define CONFIG_MXC_GPIO
  #define CONFIG_CMD_GPIO
  #define CONFIG_CI_UDC
  #define CONFIG_USBD_HS
  #define CONFIG_USB_GADGET_DUALSPEED
  #define CONFIG_USB_ETHER
  #define CONFIG_USB_ETH_CDC
  #define CONFIG_NETCONSOLE
  
  #define CONFIG_CMD_FUSE
  #ifdef CONFIG_CMD_FUSE
  #define CONFIG_MXC_OCOTP
  #endif
  
  #define CONFIG_MXC_UART
  #define CONFIG_MXC_UART_BASE	       UART1_BASE
  
  #define CONFIG_CMD_SF
  #ifdef CONFIG_CMD_SF
  #define CONFIG_SPI_FLASH
  #define CONFIG_SPI_FLASH_SST
  #define CONFIG_MXC_SPI
  #define CONFIG_SF_DEFAULT_BUS  0
  #define CONFIG_SF_DEFAULT_CS   0
  #define CONFIG_SF_DEFAULT_SPEED 25000000
  #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  #endif
  
  /* I2C Configs */
  #define CONFIG_CMD_I2C
  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_MXC
  #define CONFIG_SYS_I2C_SPEED		100000
  #define CONFIG_I2C_EDID
  
  /* MMC Configs */
  #define CONFIG_FSL_ESDHC
  #define CONFIG_FSL_USDHC
  #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  #define CONFIG_SYS_FSL_USDHC_NUM       2
  
  #define CONFIG_MMC
  #define CONFIG_CMD_MMC
  #define CONFIG_GENERIC_MMC
  #define CONFIG_BOUNCE_BUFFER
  #define CONFIG_CMD_EXT2
  #define CONFIG_CMD_EXT4
  #define CONFIG_CMD_EXT4_WRITE
  #define CONFIG_CMD_FAT
  #define CONFIG_DOS_PARTITION
  
  #ifdef CONFIG_MX6Q
  #define CONFIG_CMD_SATA
  #endif
  
  /*
   * SATA Configs
   */
  #ifdef CONFIG_CMD_SATA
  #define CONFIG_DWC_AHSATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
  #define CONFIG_LIBATA
  #endif
  
  #define CONFIG_CMD_PING
  #define CONFIG_CMD_DHCP
  #define CONFIG_CMD_MII
  #define CONFIG_CMD_NET
  #define CONFIG_FEC_MXC
  #define CONFIG_MII
  #define IMX_FEC_BASE			ENET_BASE_ADDR
  #define CONFIG_FEC_XCV_TYPE		RGMII
  #define CONFIG_ETHPRIME			"FEC"
  #define CONFIG_FEC_MXC_PHYADDR		1
  #define CONFIG_PHYLIB
  #define CONFIG_PHY_ATHEROS
  
  /* USB Configs */
  #define CONFIG_CMD_USB
  #define CONFIG_CMD_FAT
  #define CONFIG_USB_EHCI
  #define CONFIG_USB_EHCI_MX6
  #define CONFIG_USB_STORAGE
  #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
  #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
  #define CONFIG_MXC_USB_FLAGS	0
  #define CONFIG_USB_KEYBOARD
  #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  
  /* Miscellaneous commands */
  #define CONFIG_CMD_BMODE
  #define CONFIG_CMD_SETEXPR
  
  /* Framebuffer and LCD */
  #define CONFIG_VIDEO
  #define CONFIG_VIDEO_IPUV3
  #define CONFIG_CFB_CONSOLE
  #define CONFIG_VGA_AS_SINGLE_DEVICE
  #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  #define CONFIG_VIDEO_BMP_RLE8
  #define CONFIG_SPLASH_SCREEN
  #define CONFIG_BMP_16BPP
  
  /*
  #define CONFIG_VIDEO_LOGO
  */
  /*#define CONFIG_VIDEO_LOGO*/
  #define CONFIG_VIDEO_BMP_LOGO
  #define CONFIG_IPUV3_CLK 260000000
  #define CONFIG_IMX_HDMI
  #define CONFIG_IMX_VIDEO_SKIP
  
  /* allow to overwrite serial and ethaddr */
  #define CONFIG_ENV_OVERWRITE
  #define CONFIG_CONS_INDEX	       1
  #define CONFIG_BAUDRATE			       115200
  
  /* Command definition */
  #include <config_cmd_default.h>
  
  #undef CONFIG_CMD_IMLS
  
  #define CONFIG_BOOTDELAY	       1
  
  #define CONFIG_PREBOOT                 ""
  
  #define CONFIG_LOADADDR			       0x12000000
  #define CONFIG_SYS_TEXT_BASE	       0x17800000
  
  #ifdef CONFIG_CMD_SATA
  #define CONFIG_DRIVE_SATA "sata "
  #else
  #define CONFIG_DRIVE_SATA
  #endif
  
  #ifdef CONFIG_CMD_MMC
  #define CONFIG_DRIVE_MMC "mmc "
  #else
  #define CONFIG_DRIVE_MMC
  #endif
  
  #ifdef CONFIG_USB_STORAGE
  #define CONFIG_DRIVE_USB "usb "
  #else
  #define CONFIG_DRIVE_USB
  #endif
  
  #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
  #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
  
  /* LCD Info
   "panel=AT070TN83-WVGA\0" \
   "panel=LMS700KF23-WVGA\0" \
  */
  
  #define CONFIG_EXTRA_ENV_SETTINGS \
      "console=ttymxc0\0" \
      "fdt_high=0xffffffff\0" \
      "initrd_high=0xffffffff\0" \
      "loadaddr=0x12000000\0" \
      "boot_fdt=try\0" \
      "bootdelay=2\0" \
      "video=mxcfb0:dev=lcd,${panel},if=RGB24 vmalloc=192M\0" \
      "panel=AT070TN83-WVGA\0" \
      "lcdinfo=AT070TN83-WVGA LMS700KF23-WVGA\0" \
      "bootargs=console=ttymxc0,115200 root=/dev/ram0 rw --no-log initrd=0x1E000000,16M ramdisk=32768 ${video}\0" \
      "bootargs_sata=setenv bootargs console=ttymxc0,115200 root=/dev/sda1 rw --no-log rootfstype=ext4 rootwait ${video}\0" \
      "bootargs_ram=setenv bootargs console=ttymxc0,115200 root=/dev/ram0 rw --no-log initrd=0x1E000000,16M ramdisk=32768 ${video}\0" \
      "bootargs_mmc=setenv bootargs console=ttymxc0,115200 root=/dev/mmcblk0p1 rw --no-log rootfstype=ext4 rootdelay=5 ${video}\0" \
      "ethaddr=00:FA:14:06:03:00\0" \
      "serverip=192.168.10.132\0" \
      "ipaddr=192.168.10.139\0" \
      "netmask=255.255.0.0\0" \
      "gatewayip=192.168.10.1\0" \
      "ip_dyn=yes\0" \
      "uboot=tftpboot 0x12000000 u-boot.imx; mmc write 0x12000000 2 600\0" \
      "kernel=tftpboot 0x12000000 uImage.imx6; mmc write 0x12000000 1000 4000\0" \
      "ramdisk=tftpboot 0x1E000000 ramdisk.imx6-2.0-32M.gz; mmc write 0x1E000000 7000 C000\0" \
      "dtb=tftpboot 0x11F00000 imx6dl-vt.dtb; mmc write 0x11F00000 A00 100\0" \
      "bootram=mmc dev 0; mmcinfo; mmc read 0x12000000 1000 4000; mmc read 0x1E000000 7000 C000; bootm 0x12000000\0" \
      "bootmmc=mmc dev 0; mmcinfo; mmc read 0x12000000 1000 4000; bootm 0x12000000\0" \
      "bootram_dtb=mmc dev 0; mmcinfo; mmc read 0x11F00000 A00 100; mmc read 0x12000000 1000 4000; mmc read 0x1E000000 7000 C000; bootm 0x12000000 - 0x11F00000\0" \
      "bootmmc_dtb=mmc dev 0; mmcinfo; mmc read 0x11F00000 A00 100; mmc read 0x12000000 1000 4000; bootz 0x12000000 - 0x11F00000\0" \
      "bootcmd=run bootargs_ram bootram_dtb \0"
  
  /* Miscellaneous configurable options */
  #define CONFIG_SYS_LONGHELP
  #define CONFIG_SYS_HUSH_PARSER
  #define CONFIG_SYS_PROMPT	       "U-Boot > "
  #define CONFIG_AUTO_COMPLETE
  #define CONFIG_SYS_CBSIZE	       1024
  #define CONFIG_SYS_MAXARGS	       48
  #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
  
  #define CONFIG_SYS_MEMTEST_START       0x10000000
  #define CONFIG_SYS_MEMTEST_END	       0x10010000
  #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
  
  #define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
  
  #define CONFIG_CMDLINE_EDITING
  
  /* Physical Memory Map */
  #define CONFIG_NR_DRAM_BANKS	       1
  #define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR
  
  #define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
  #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
  #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
  
  #define CONFIG_SYS_INIT_SP_OFFSET \
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR \
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  
  /* FLASH and environment organization */
  #define CONFIG_SYS_NO_FLASH
  
  #define CONFIG_ENV_SIZE			(8 * 1024)
  
  #define CONFIG_ENV_IS_IN_MMC
  
  #if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_ENV_OFFSET		(768 * 1024)
  #define CONFIG_SYS_MMC_ENV_DEV		0
  #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET		(768 * 1024)
  #define CONFIG_ENV_SECT_SIZE		(8 * 1024)
  #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
  #endif
  
  #define CONFIG_OF_LIBFDT
  #define CONFIG_CMD_BOOTZ
  
  #ifndef CONFIG_SYS_DCACHE_OFF
  #define CONFIG_CMD_CACHE
  #endif
  
  #define CONFIG_CMD_BMP
  
  #define CONFIG_CMD_TIME
  #define CONFIG_CMD_MEMTEST
  #define CONFIG_SYS_ALT_MEMTEST
  
  #define CONFIG_CMD_BOOTZ
  #define CONFIG_SUPPORT_RAW_INITRD
  #define CONFIG_CMD_FS_GENERIC
  
  /*
   * PCI express
   */
  #ifdef CONFIG_CMD_PCI
  #define CONFIG_PCI
  #define CONFIG_PCI_PNP
  #define CONFIG_PCI_SCAN_SHOW
  #define CONFIG_PCIE_IMX
  #endif
  
  #define CONFIG_CMD_ELF
  
  #define CONFIG_USB_GADGET
  #define CONFIG_CMD_USB_MASS_STORAGE
  #define CONFIG_USB_GADGET_MASS_STORAGE
  #define CONFIG_USBDOWNLOAD_GADGET
  #define CONFIG_USB_GADGET_VBUS_DRAW	2
  
  /* Netchip IDs */
  #define CONFIG_G_DNL_VENDOR_NUM 0x0525
  #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
  #define CONFIG_G_DNL_MANUFACTURER "Boundary"
  
  #define CONFIG_CMD_FASTBOOT
  #define CONFIG_ANDROID_BOOT_IMAGE
  #define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
  #define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
  
  #endif	       /* __CONFIG_H */