/*
   *  linux/arch/arm/mm/proc-sa1100.S
   *
   *  Copyright (C) 1997-2002 Russell King
   *  hacked for non-paged-MM by Hyok S. Choi, 2003.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License version 2 as
   * published by the Free Software Foundation.
   *
   *  MMU functions for SA110
   *
   *  These are the low level assembler for performing cache and TLB
   *  functions on the StrongARM-1100 and StrongARM-1110.
   *
   *  Note that SA1100 and SA1110 share everything but their name and CPU ID.
   *
   *  12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
   *    Flush the read buffer at context switches
   */
  #include <linux/linkage.h>
  #include <linux/init.h>
  #include <asm/assembler.h>
  #include <asm/asm-offsets.h>
  #include <asm/hwcap.h>
  #include <mach/hardware.h>
  #include <asm/pgtable-hwdef.h>
  #include <asm/pgtable.h>
  
  #include "proc-macros.S"
  
  /*
   * the cache line size of the I and D cache
   */
  #define DCACHELINESIZE	32
  
  	.section .text
  
  /*
   * cpu_sa1100_proc_init()
   */
  ENTRY(cpu_sa1100_proc_init)
  	mov	r0, #0
  	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
  	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
  	mov	pc, lr
  
  /*
   * cpu_sa1100_proc_fin()
   *
   * Prepare the CPU for reset:
   *  - Disable interrupts
   *  - Clean and turn off caches.
   */
  ENTRY(cpu_sa1100_proc_fin)
  	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
  	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
  	bic	r0, r0, #0x1000			@ ...i............
  	bic	r0, r0, #0x000e			@ ............wca.
  	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
  	mov	pc, lr
  
  /*
   * cpu_sa1100_reset(loc)
   *
   * Perform a soft reset of the system.  Put the CPU into the
   * same state as it would be if it had been reset, and branch
   * to what would be the reset vector.
   *
   * loc: location to jump to for soft reset
   */
  	.align	5
  	.pushsection	.idmap.text, "ax"
  ENTRY(cpu_sa1100_reset)
  	mov	ip, #0
  	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  #ifdef CONFIG_MMU
  	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
  #endif
  	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
  	bic	ip, ip, #0x000f			@ ............wcam
  	bic	ip, ip, #0x1100			@ ...i...s........
  	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
  	mov	pc, r0
  ENDPROC(cpu_sa1100_reset)
  	.popsection
  
  /*
   * cpu_sa1100_do_idle(type)
   *
   * Cause the processor to idle
   *
   * type: call type:
   *   0 = slow idle
   *   1 = fast idle
   *   2 = switch to slow processor clock
   *   3 = switch to fast processor clock
   */
  	.align	5
  ENTRY(cpu_sa1100_do_idle)
  	mov	r0, r0				@ 4 nop padding
  	mov	r0, r0
  	mov	r0, r0
  	mov	r0, r0				@ 4 nop padding
  	mov	r0, r0
  	mov	r0, r0
  	mov	r0, #0
  	ldr	r1, =UNCACHEABLE_ADDR		@ ptr to uncacheable address
  	@ --- aligned to a cache line
  	mcr	p15, 0, r0, c15, c2, 2		@ disable clock switching
  	ldr	r1, [r1, #0]			@ force switch to MCLK
  	mcr	p15, 0, r0, c15, c8, 2		@ wait for interrupt
  	mov	r0, r0				@ safety
  	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
  	mov	pc, lr
  
  /* ================================= CACHE ================================ */
  
  /*
   * cpu_sa1100_dcache_clean_area(addr,sz)
   *
   * Clean the specified entry of any caches such that the MMU
   * translation fetches will obtain correct data.
   *
   * addr: cache-unaligned virtual address
   */
  	.align	5
  ENTRY(cpu_sa1100_dcache_clean_area)
  1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
  	add	r0, r0, #DCACHELINESIZE
  	subs	r1, r1, #DCACHELINESIZE
  	bhi	1b
  	mov	pc, lr
  
  /* =============================== PageTable ============================== */
  
  /*
   * cpu_sa1100_switch_mm(pgd)
   *
   * Set the translation base pointer to be as described by pgd.
   *
   * pgd: new page tables
   */
  	.align	5
  ENTRY(cpu_sa1100_switch_mm)
  #ifdef CONFIG_MMU
  	str	lr, [sp, #-4]!
  	bl	v4wb_flush_kern_cache_all	@ clears IP
  	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
  	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
  	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
  	ldr	pc, [sp], #4
  #else
  	mov	pc, lr
  #endif
  
  /*
   * cpu_sa1100_set_pte_ext(ptep, pte, ext)
   *
   * Set a PTE and flush it out
   */
  	.align	5
  ENTRY(cpu_sa1100_set_pte_ext)
  #ifdef CONFIG_MMU
  	armv3_set_pte_ext wc_disable=0
  	mov	r0, r0
  	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
  	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
  #endif
  	mov	pc, lr
  
  .globl	cpu_sa1100_suspend_size
  .equ	cpu_sa1100_suspend_size, 4 * 3
  #ifdef CONFIG_ARM_CPU_SUSPEND
  ENTRY(cpu_sa1100_do_suspend)
  	stmfd	sp!, {r4 - r6, lr}
  	mrc	p15, 0, r4, c3, c0, 0		@ domain ID
  	mrc	p15, 0, r5, c13, c0, 0		@ PID
  	mrc	p15, 0, r6, c1, c0, 0		@ control reg
  	stmia	r0, {r4 - r6}			@ store cp regs
  	ldmfd	sp!, {r4 - r6, pc}
  ENDPROC(cpu_sa1100_do_suspend)
  
  ENTRY(cpu_sa1100_do_resume)
  	ldmia	r0, {r4 - r6}			@ load cp regs
  	mov	ip, #0
  	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
  	mcr	p15, 0, ip, c7, c7, 0		@ flush I&D cache
  	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
  	mcr	p15, 0, ip, c9, c0, 5		@ allow user space to use RB
  
  	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
  	mcr	p15, 0, r1, c2, c0, 0		@ translation table base addr
  	mcr	p15, 0, r5, c13, c0, 0		@ PID
  	mov	r0, r6				@ control register
  	b	cpu_resume_mmu
  ENDPROC(cpu_sa1100_do_resume)
  #endif
  
  	.type	__sa1100_setup, #function
  __sa1100_setup:
  	mov	r0, #0
  	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
  	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
  #ifdef CONFIG_MMU
  	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
  #endif
  	adr	r5, sa1100_crval
  	ldmia	r5, {r5, r6}
  	mrc	p15, 0, r0, c1, c0		@ get control register v4
  	bic	r0, r0, r5
  	orr	r0, r0, r6
  	mov	pc, lr
  	.size	__sa1100_setup, . - __sa1100_setup
  
  	/*
  	 *  R
  	 * .RVI ZFRS BLDP WCAM
  	 * ..11 0001 ..11 1101
  	 * 
  	 */
  	.type	sa1100_crval, #object
  sa1100_crval:
  	crval	clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
  
  	__INITDATA
  
  /*
   * SA1100 and SA1110 share the same function calls
   */
  
  	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
  	define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1
  
  	.section ".rodata"
  
  	string	cpu_arch_name, "armv4"
  	string	cpu_elf_name, "v4"
  	string	cpu_sa1100_name, "StrongARM-1100"
  	string	cpu_sa1110_name, "StrongARM-1110"
  
  	.align
  
  	.section ".proc.info.init", #alloc, #execinstr
  
  .macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
  	.type	__
  ame\()_proc_info,#object
  __
  ame\()_proc_info:
  	.long	\cpu_val
  	.long	\cpu_mask
  	.long   PMD_TYPE_SECT | \
  		PMD_SECT_BUFFERABLE | \
  		PMD_SECT_CACHEABLE | \
  		PMD_SECT_AP_WRITE | \
  		PMD_SECT_AP_READ
  	.long   PMD_TYPE_SECT | \
  		PMD_SECT_AP_WRITE | \
  		PMD_SECT_AP_READ
  	b	__sa1100_setup
  	.long	cpu_arch_name
  	.long	cpu_elf_name
  	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
  	.long	\cpu_name
  	.long	sa1100_processor_functions
  	.long	v4wb_tlb_fns
  	.long	v4_mc_user_fns
  	.long	v4wb_cache_fns
  	.size	__
  ame\()_proc_info, . - __
  ame\()_proc_info
  .endm
  
  	sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name
  	sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name