config ARCH_OMAP
  	bool
  
  config ARCH_OMAP2
  	bool "TI OMAP2"
  	depends on ARCH_MULTI_V6
  	select ARCH_OMAP2PLUS
  	select CPU_V6
  	select MULTI_IRQ_HANDLER
  	select SOC_HAS_OMAP2_SDRC
  
  config ARCH_OMAP3
  	bool "TI OMAP3"
  	depends on ARCH_MULTI_V7
  	select ARCH_OMAP2PLUS
  	select ARCH_HAS_OPP
  	select ARM_CPU_SUSPEND if PM
  	select CPU_V7
  	select MULTI_IRQ_HANDLER
  	select OMAP_INTERCONNECT
  	select PM_OPP if PM
  	select PM_RUNTIME if CPU_IDLE
  	select SOC_HAS_OMAP2_SDRC
  	select USB_ARCH_HAS_EHCI if USB_SUPPORT
  
  config ARCH_OMAP4
  	bool "TI OMAP4"
  	depends on ARCH_MULTI_V7
  	select ARCH_OMAP2PLUS
  	select ARCH_HAS_OPP
  	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
  	select ARM_CPU_SUSPEND if PM
  	select ARM_ERRATA_720789
  	select ARM_GIC
  	select CACHE_L2X0
  	select CPU_V7
  	select HAVE_ARM_SCU if SMP
  	select HAVE_ARM_TWD if SMP
  	select HAVE_SMP
  	select OMAP_INTERCONNECT
  	select PL310_ERRATA_588369
  	select PL310_ERRATA_727915
  	select PM_OPP if PM
  	select PM_RUNTIME if CPU_IDLE
  	select USB_ARCH_HAS_EHCI if USB_SUPPORT
  	select ARM_ERRATA_754322
  	select ARM_ERRATA_775420
  
  config SOC_OMAP5
  	bool "TI OMAP5"
  	depends on ARCH_MULTI_V7
  	select ARCH_OMAP2PLUS
  	select ARCH_HAS_OPP
  	select ARM_CPU_SUSPEND if PM
  	select ARM_GIC
  	select CPU_V7
  	select HAVE_ARM_SCU if SMP
  	select HAVE_ARM_TWD if SMP
  	select HAVE_SMP
  	select HAVE_ARM_ARCH_TIMER
  	select ARM_ERRATA_798181 if SMP
  
  config SOC_AM33XX
  	bool "TI AM33XX"
  	depends on ARCH_MULTI_V7
  	select ARCH_OMAP2PLUS
  	select ARCH_HAS_OPP
  	select ARM_CPU_SUSPEND if PM
  	select CPU_V7
  	select MULTI_IRQ_HANDLER
  
  config SOC_AM43XX
  	bool "TI AM43x"
  	depends on ARCH_MULTI_V7
  	select CPU_V7
  	select ARCH_OMAP2PLUS
  	select ARCH_HAS_OPP
  	select MULTI_IRQ_HANDLER
  	select ARM_GIC
  	select MACH_OMAP_GENERIC
  
  config SOC_DRA7XX
  	bool "TI DRA7XX"
  	depends on ARCH_MULTI_V7
  	select ARCH_OMAP2PLUS
  	select ARCH_HAS_OPP
  	select ARM_CPU_SUSPEND if PM
  	select ARM_GIC
  	select CPU_V7
  	select HAVE_SMP
  	select HAVE_ARM_ARCH_TIMER
  
  config ARCH_OMAP2PLUS
  	bool
  	select ARCH_HAS_BANDGAP
  	select ARCH_HAS_CPUFREQ
  	select ARCH_HAS_HOLES_MEMORYMODEL
  	select ARCH_OMAP
  	select ARCH_REQUIRE_GPIOLIB
  	select CLKSRC_MMIO
  	select COMMON_CLK
  	select GENERIC_CLOCKEVENTS
  	select GENERIC_IRQ_CHIP
  	select MACH_OMAP_GENERIC
  	select OMAP_DM_TIMER
  	select PINCTRL
  	select PROC_DEVICETREE if PROC_FS
  	select SOC_BUS
  	select SPARSE_IRQ
  	select TI_PRIV_EDMA
  	select USE_OF
  	help
  	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
  
  
  if ARCH_OMAP2PLUS
  
  menu "TI OMAP2/3/4 Specific Features"
  
  config ARCH_OMAP2PLUS_TYPICAL
  	bool "Typical OMAP configuration"
  	default y
  	select AEABI
  	select HIGHMEM
  	select I2C
  	select I2C_OMAP
  	select MENELAUS if ARCH_OMAP2
  	select NEON if CPU_V7
  	select PM_RUNTIME
  	select REGULATOR
  	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
  	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
  	select VFP
  	help
  	  Compile a kernel suitable for booting most boards
  
  config SOC_HAS_OMAP2_SDRC
  	bool "OMAP2 SDRAM Controller support"
  
  config SOC_HAS_REALTIME_COUNTER
  	bool "Real time free running counter"
  	depends on SOC_OMAP5 || SOC_DRA7XX
  	default y
  
  comment "OMAP Core Type"
  	depends on ARCH_OMAP2
  
  config SOC_OMAP2420
  	bool "OMAP2420 support"
  	depends on ARCH_OMAP2
  	default y
  	select OMAP_DM_TIMER
  	select SOC_HAS_OMAP2_SDRC
  
  config SOC_OMAP2430
  	bool "OMAP2430 support"
  	depends on ARCH_OMAP2
  	default y
  	select SOC_HAS_OMAP2_SDRC
  
  config SOC_OMAP3430
  	bool "OMAP3430 support"
  	depends on ARCH_OMAP3
  	default y
  	select SOC_HAS_OMAP2_SDRC
  
  config SOC_TI81XX
  	bool "TI81XX support"
  	depends on ARCH_OMAP3
  	default y
  
  config OMAP_PACKAGE_ZAF
         bool
  
  config OMAP_PACKAGE_ZAC
         bool
  
  config OMAP_PACKAGE_CBC
         bool
  
  config OMAP_PACKAGE_CBB
         bool
  
  config OMAP_PACKAGE_CUS
         bool
  
  config OMAP_PACKAGE_CBP
         bool
  
  comment "OMAP Legacy Platform Data Board Type"
  	depends on ARCH_OMAP2PLUS
  
  config MACH_OMAP_GENERIC
  	bool
  
  config MACH_OMAP2_TUSB6010
  	bool
  	depends on ARCH_OMAP2 && SOC_OMAP2420
  	default y if MACH_NOKIA_N8X0
  
  config MACH_OMAP3_BEAGLE
  	bool "OMAP3 BEAGLE board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_DEVKIT8000
  	bool "DEVKIT8000 board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CUS
  
  config MACH_OMAP_LDP
  	bool "OMAP3 LDP board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_OMAP3530_LV_SOM
  	bool "OMAP3 Logic 3530 LV SOM board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  	help
  	 Support for the LogicPD OMAP3530 SOM Development kit
  	 for full description please see the products webpage at
  	 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
  
  config MACH_OMAP3_TORPEDO
  	bool "OMAP3 Logic 35x Torpedo board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  	help
  	 Support for the LogicPD OMAP35x Torpedo Development kit
  	 for full description please see the products webpage at
  	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
  
  config MACH_OVERO
  	bool "Gumstix Overo board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_OMAP3517EVM
  	bool "OMAP3517/ AM3517 EVM board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_CRANEBOARD
  	bool "AM3517/05 CRANE board"
  	depends on ARCH_OMAP3
  	select OMAP_PACKAGE_CBB
  
  config MACH_OMAP3_PANDORA
  	bool "OMAP3 Pandora"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  	select REGULATOR_FIXED_VOLTAGE if REGULATOR
  
  config MACH_TOUCHBOOK
  	bool "OMAP3 Touch Book"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_OMAP_3430SDP
  	bool "OMAP 3430 SDP board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_NOKIA_N810
         bool
  
  config MACH_NOKIA_N810_WIMAX
         bool
  
  config MACH_NOKIA_N8X0
  	bool "Nokia N800/N810"
  	depends on SOC_OMAP2420
  	default y
  	select MACH_NOKIA_N810
  	select MACH_NOKIA_N810_WIMAX
  	select OMAP_PACKAGE_ZAC
  
  config MACH_NOKIA_RX51
  	bool "Nokia N900 (RX-51) phone"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_CM_T35
  	bool "CompuLab CM-T35/CM-T3730 modules"
  	depends on ARCH_OMAP3
  	default y
  	select MACH_CM_T3730
  	select OMAP_PACKAGE_CUS
  
  config MACH_CM_T3517
  	bool "CompuLab CM-T3517 module"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CBB
  
  config MACH_CM_T3730
         bool
  
  config MACH_SBC3530
  	bool "OMAP3 SBC STALKER board"
  	depends on ARCH_OMAP3
  	default y
  	select OMAP_PACKAGE_CUS
  
  config MACH_TI8168EVM
  	bool "TI8168 Evaluation Module"
  	depends on SOC_TI81XX
  	default y
  
  config MACH_TI8148EVM
  	bool "TI8148 Evaluation Module"
  	depends on SOC_TI81XX
  	default y
  
  config OMAP3_EMU
  	bool "OMAP3 debugging peripherals"
  	depends on ARCH_OMAP3
  	select ARM_AMBA
  	select OC_ETM
  	help
  	  Say Y here to enable debugging hardware of omap3
  
  config OMAP3_SDRC_AC_TIMING
  	bool "Enable SDRC AC timing register changes"
  	depends on ARCH_OMAP3
  	default n
  	help
  	  If you know that none of your system initiators will attempt to
  	  access SDRAM during CORE DVFS, select Y here.  This should boost
  	  SDRAM performance at lower CORE OPPs.  There are relatively few
  	  users who will wish to say yes at this point - almost everyone will
  	  wish to say no.  Selecting yes without understanding what is
  	  going on could result in system crashes;
  
  config OMAP4_ERRATA_I688
  	bool "OMAP4 errata: Async Bridge Corruption"
  	depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
  	select ARCH_HAS_BARRIERS
  	help
  	  If a data is stalled inside asynchronous bridge because of back
  	  pressure, it may be accepted multiple times, creating pointer
  	  misalignment that will corrupt next transfers on that data path
  	  until next reset of the system (No recovery procedure once the
  	  issue is hit, the path remains consistently broken). Async bridge
  	  can be found on path between MPU to EMIF and MPU to L3 interconnect.
  	  This situation can happen only when the idle is initiated by a
  	  Master Request Disconnection (which is trigged by software when
  	  executing WFI on CPU).
  	  The work-around for this errata needs all the initiators connected
  	  through async bridge must ensure that data path is properly drained
  	  before issuing WFI. This condition will be met if one Strongly ordered
  	  access is performed to the target right before executing the WFI.
  	  In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
  	  IO barrier ensure that there is no synchronisation loss on initiators
  	  operating on both interconnect port simultaneously.
  endmenu
  
  endif