Kernel driver lm90
  ==================
  
  Supported chips:
    * National Semiconductor LM90
      Prefix: 'lm90'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the National Semiconductor website
                 http://www.national.com/pf/LM/LM90.html
    * National Semiconductor LM89
      Prefix: 'lm89' (no auto-detection)
      Addresses scanned: I2C 0x4c and 0x4d
      Datasheet: Publicly available at the National Semiconductor website
                 http://www.national.com/mpf/LM/LM89.html
    * National Semiconductor LM99
      Prefix: 'lm99'
      Addresses scanned: I2C 0x4c and 0x4d
      Datasheet: Publicly available at the National Semiconductor website
                 http://www.national.com/pf/LM/LM99.html
    * National Semiconductor LM86
      Prefix: 'lm86'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the National Semiconductor website
                 http://www.national.com/mpf/LM/LM86.html
    * Analog Devices ADM1032
      Prefix: 'adm1032'
      Addresses scanned: I2C 0x4c and 0x4d
      Datasheet: Publicly available at the ON Semiconductor website
                 http://www.onsemi.com/PowerSolutions/product.do?id=ADM1032
    * Analog Devices ADT7461
      Prefix: 'adt7461'
      Addresses scanned: I2C 0x4c and 0x4d
      Datasheet: Publicly available at the ON Semiconductor website
                 http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
    * Analog Devices ADT7461A
      Prefix: 'adt7461a'
      Addresses scanned: I2C 0x4c and 0x4d
      Datasheet: Publicly available at the ON Semiconductor website
                 http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
    * ON Semiconductor NCT1008
      Prefix: 'nct1008'
      Addresses scanned: I2C 0x4c and 0x4d
      Datasheet: Publicly available at the ON Semiconductor website
                 http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
    * Maxim MAX6646
      Prefix: 'max6646'
      Addresses scanned: I2C 0x4d
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
    * Maxim MAX6647
      Prefix: 'max6646'
      Addresses scanned: I2C 0x4e
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
    * Maxim MAX6648
      Prefix: 'max6646'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
    * Maxim MAX6649
      Prefix: 'max6646'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
    * Maxim MAX6657
      Prefix: 'max6657'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
    * Maxim MAX6658
      Prefix: 'max6657'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
    * Maxim MAX6659
      Prefix: 'max6659'
      Addresses scanned: I2C 0x4c, 0x4d, 0x4e
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
    * Maxim MAX6680
      Prefix: 'max6680'
      Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
                             0x4c, 0x4d and 0x4e
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
    * Maxim MAX6681
      Prefix: 'max6680'
      Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
                             0x4c, 0x4d and 0x4e
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
    * Maxim MAX6692
      Prefix: 'max6646'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
    * Maxim MAX6695
      Prefix: 'max6695'
      Addresses scanned: I2C 0x18
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/datasheet/index.mvp/id/4199
    * Maxim MAX6696
      Prefix: 'max6695'
      Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
                             0x4c, 0x4d and 0x4e
      Datasheet: Publicly available at the Maxim website
                 http://www.maxim-ic.com/datasheet/index.mvp/id/4199
    * Winbond/Nuvoton W83L771W/G
      Prefix: 'w83l771'
      Addresses scanned: I2C 0x4c
      Datasheet: No longer available
    * Winbond/Nuvoton W83L771AWG/ASG
      Prefix: 'w83l771'
      Addresses scanned: I2C 0x4c
      Datasheet: Not publicly available, can be requested from Nuvoton
    * Philips/NXP SA56004X
      Prefix: 'sa56004'
      Addresses scanned: I2C 0x48 through 0x4F
      Datasheet: Publicly available at NXP website
                 http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf
    * GMT G781
      Prefix: 'g781'
      Addresses scanned: I2C 0x4c, 0x4d
      Datasheet: Not publicly available from GMT
    * Texas Instruments TMP451
      Prefix: 'tmp451'
      Addresses scanned: I2C 0x4c
      Datasheet: Publicly available at TI website
                 http://www.ti.com/litv/pdf/sbos686
  
  
  Author: Jean Delvare <jdelvare@suse.de>
  
  
  Description
  -----------
  
  The LM90 is a digital temperature sensor. It senses its own temperature as
  well as the temperature of up to one external diode. It is compatible
  with many other devices, many of which are supported by this driver.
  
  Note that there is no easy way to differentiate between the MAX6657,
  MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
  supported by this driver if the chip is located at address 0x4d or 0x4e,
  or if the chip type is explicitly selected as max6659.
  The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
  can't (and don't need to) be distinguished.
  
  The specificity of this family of chipsets over the ADM1021/LM84
  family is that it features critical limits with hysteresis, and an
  increased resolution of the remote temperature measurement.
  
  The different chipsets of the family are not strictly identical, although
  very similar. For reference, here comes a non-exhaustive list of specific
  features:
  
  LM90:
    * Filter and alert configuration register at 0xBF.
    * ALERT is triggered by temperatures over critical limits.
  
  LM86 and LM89:
    * Same as LM90
    * Better external channel accuracy
  
  LM99:
    * Same as LM89
    * External temperature shifted by 16 degrees down
  
  ADM1032:
    * Consecutive alert register at 0x22.
    * Conversion averaging.
    * Up to 64 conversions/s.
    * ALERT is triggered by open remote sensor.
    * SMBus PEC support for Write Byte and Receive Byte transactions.
  
  ADT7461, ADT7461A, NCT1008:
    * Extended temperature range (breaks compatibility)
    * Lower resolution for remote temperature
  
  MAX6657 and MAX6658:
    * Better local resolution
    * Remote sensor type selection
  
  MAX6659:
    * Better local resolution
    * Selectable address
    * Second critical temperature limit
    * Remote sensor type selection
  
  MAX6680 and MAX6681:
    * Selectable address
    * Remote sensor type selection
  
  MAX6695 and MAX6696:
    * Better local resolution
    * Selectable address (max6696)
    * Second critical temperature limit
    * Two remote sensors
  
  W83L771W/G
    * The G variant is lead-free, otherwise similar to the W.
    * Filter and alert configuration register at 0xBF
    * Moving average (depending on conversion rate)
  
  W83L771AWG/ASG
    * Successor of the W83L771W/G, same features.
    * The AWG and ASG variants only differ in package format.
    * Diode ideality factor configuration (remote sensor) at 0xE3
  
  SA56004X:
    * Better local resolution
  
  All temperature values are given in degrees Celsius. Resolution
  is 1.0 degree for the local temperature, 0.125 degree for the remote
  temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
  resolution of 0.125 degree for both temperatures.
  
  Each sensor has its own high and low limits, plus a critical limit.
  Additionally, there is a relative hysteresis value common to both critical
  values. To make life easier to user-space applications, two absolute values
  are exported, one for each channel, but these values are of course linked.
  Only the local hysteresis can be set from user-space, and the same delta
  applies to the remote hysteresis.
  
  The lm90 driver will not update its values more frequently than configured with
  the update_interval attribute; reading them more often will do no harm, but will
  return 'old' values.
  
  SMBus Alert Support
  -------------------
  
  This driver has basic support for SMBus alert. When an alert is received,
  the status register is read and the faulty temperature channel is logged.
  
  The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
  Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
  properly so additional care is needed: the ALERT output is disabled when
  an alert is received, and is re-enabled only when the alarm is gone.
  Otherwise the chip would block alerts from other chips in the bus as long
  as the alarm is active.
  
  PEC Support
  -----------
  
  The ADM1032 is the only chip of the family which supports PEC. It does
  not support PEC on all transactions though, so some care must be taken.
  
  When reading a register value, the PEC byte is computed and sent by the
  ADM1032 chip. However, in the case of a combined transaction (SMBus Read
  Byte), the ADM1032 computes the CRC value over only the second half of
  the message rather than its entirety, because it thinks the first half
  of the message belongs to a different transaction. As a result, the CRC
  value differs from what the SMBus master expects, and all reads fail.
  
  For this reason, the lm90 driver will enable PEC for the ADM1032 only if
  the bus supports the SMBus Send Byte and Receive Byte transaction types.
  These transactions will be used to read register values, instead of
  SMBus Read Byte, and PEC will work properly.
  
  Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
  Instead, it will try to write the PEC value to the register (because the
  SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
  without PEC), which is not what we want. Thus, PEC is explicitly disabled
  on SMBus Send Byte transactions in the lm90 driver.
  
  PEC on byte data transactions represents a significant increase in bandwidth
  usage (+33% for writes, +25% for reads) in normal conditions. With the need
  to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
  two transactions will typically mean twice as much delay waiting for
  transaction completion, effectively doubling the register cache refresh time.
  I guess reliability comes at a price, but it's quite expensive this time.
  
  So, as not everyone might enjoy the slowdown, PEC can be disabled through
  sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
  to that file to enable PEC again.