/*
   * pcm051.h
   *
   * Phytec phyCORE-AM335x (pcm051) boards information header
   *
   * Copyright (C) 2013 Lemonage Software GmbH
   * Author Lars Poeschel <poeschel@lemonage.de>
   *
   * This program is free software; you can redistribute it and/or
   * modify it under the terms of the GNU General Public License as
   * published by the Free Software Foundation version 2.
   *
   * This program is distributed "as is" WITHOUT ANY WARRANTY of any
   * kind, whether express or implied; without even the implied warranty
   * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   * GNU General Public License for more details.
   */
  
  #ifndef __CONFIG_PCM051_H
  #define __CONFIG_PCM051_H
  
  #include <configs/ti_am335x_common.h>
  
  #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
  #define MACH_TYPE_PCM051		4144	/* Until the next sync */
  #define CONFIG_MACH_TYPE		MACH_TYPE_PCM051
  
  /* set to negative value for no autoboot */
  #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"loadaddr=0x80007fc0\0" \
  	"fdtaddr=0x80000000\0" \
  	"rdaddr=0x81000000\0" \
  	"bootfile=uImage\0" \
  	"fdtfile=pcm051.dtb\0" \
  	"console=ttyO0,115200n8\0" \
  	"optargs=\0" \
  	"mmcdev=0\0" \
  	"mmcroot=/dev/mmcblk0p2 ro\0" \
  	"mmcrootfstype=ext4 rootwait\0" \
  	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
  	"ramrootfstype=ext2\0" \
  	"mmcargs=setenv bootargs console=${console} " \
  		"${optargs} " \
  		"root=${mmcroot} " \
  		"rootfstype=${mmcrootfstype}\0" \
  	"bootenv=uEnv.txt\0" \
  	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
  	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
  		"source ${loadaddr}\0" \
  	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
  	"importbootenv=echo Importing environment from mmc ...; " \
  		"env import -t $loadaddr $filesize\0" \
  	"ramargs=setenv bootargs console=${console} " \
  		"${optargs} " \
  		"root=${ramroot} " \
  		"rootfstype=${ramrootfstype}\0" \
  	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
  	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
  	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
  	"mmcboot=echo Booting from mmc ...; " \
  		"run mmcargs; " \
  		"bootm ${loadaddr}\0" \
  	"ramboot=echo Booting from ramdisk ...; " \
  		"run ramargs; " \
  		"bootm ${loadaddr}\0" \
  
  #define CONFIG_BOOTCOMMAND \
  	"mmc dev ${mmcdev}; if mmc rescan; then " \
  		"echo SD/MMC found on device ${mmcdev};" \
  		"if run loadbootscript; then " \
  			"run bootscript;" \
  		"else " \
  			"if run loadbootenv; then " \
  				"echo Loaded environment from ${bootenv};" \
  				"run importbootenv;" \
  			"fi;" \
  			"if test -n $uenvcmd; then " \
  				"echo Running uenvcmd ...;" \
  				"run uenvcmd;" \
  			"fi;" \
  			"if run loaduimage; then " \
  				"run mmcboot;" \
  			"fi;" \
  		"fi ;" \
  	"fi;" \
  
  /* Clock Defines */
  #define V_OSCK				25000000  /* Clock output from T2 */
  #define V_SCLK				(V_OSCK)
  
  /*
   * memtest works on 8 MB in DRAM after skipping 32MB from
   * start addr of ram disk
   */
  #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + (64 << 20))
  #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
  					+ (8 * 1024 * 1024))
  
  #define CONFIG_SPI_FLASH
  #define CONFIG_SPI_FLASH_WINBOND
  #define CONFIG_CMD_SF
  #define CONFIG_SF_DEFAULT_SPEED		24000000
  
  #define CONFIG_CONS_INDEX		1
  /* NS16550 Configuration */
  #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
  #define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
  #define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
  #define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
  #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
  #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
  
  /* I2C Configuration */
  #define CONFIG_CMD_EEPROM
  #define CONFIG_ENV_EEPROM_IS_ON_I2C
  #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
  #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
  #define CONFIG_SYS_I2C_MULTI_EEPROMS
  
  #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
  4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
  
  /* CPU */
  #define CONFIG_ENV_IS_NOWHERE
  
  #define CONFIG_SPL_YMODEM_SUPPORT
  #define CONFIG_SPL_NET_SUPPORT
  #define CONFIG_SPL_ENV_SUPPORT
  #define CONFIG_SPL_NET_VCI_STRING	"pcm051 U-Boot SPL"
  #define CONFIG_SPL_ETH_SUPPORT
  #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
  
  #ifdef CONFIG_SPI_BOOT
  #define CONFIG_SPL_SPI_SUPPORT
  #define CONFIG_SPL_SPI_FLASH_SUPPORT
  #define CONFIG_SPL_SPI_LOAD
  #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
  #define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
  #endif
  
  /*
   * USB configuration
   */
  #define CONFIG_USB_MUSB_DSPS
  #define CONFIG_ARCH_MISC_INIT
  #define CONFIG_MUSB_GADGET
  #define CONFIG_MUSB_PIO_ONLY
  #define CONFIG_USB_GADGET_DUALSPEED
  #define CONFIG_MUSB_HOST
  #define CONFIG_AM335X_USB0
  #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
  #define CONFIG_AM335X_USB1
  #define CONFIG_AM335X_USB1_MODE MUSB_HOST
  
  #ifdef CONFIG_MUSB_HOST
  #define CONFIG_CMD_USB
  #define CONFIG_USB_STORAGE
  #endif
  
  #ifdef CONFIG_MUSB_GADGET
  #define CONFIG_USB_ETHER
  #define CONFIG_USB_ETH_RNDIS
  #endif /* CONFIG_MUSB_GADGET */
  
  /* Unsupported features */
  #undef CONFIG_USE_IRQ
  
  #define CONFIG_NET_MULTI
  #define CONFIG_PHY_GIGE
  #define CONFIG_PHYLIB
  #define CONFIG_PHY_SMSC
  
  #endif	/* ! __CONFIG_PCM051_H */