#include <QTimer>

  #include <unistd.h>

  #include "fileprocessdlg.h"
  #include "ui_fileprocessdlg.h"
  #include "fileprocessor.h"
  #include "ovenstatics.h"

  #include "stringer.h"

  #include "config.h"

  #include <QDebug>

  #define ERROR_LOG_FILE_TOP  "/GasErrorHistoryTop.csv"
  #define ERROR_LOG_FILE_STEAM  "/GasErrorHistorySteam.csv"
  #define ERROR_LOG_FILE_BOTTOM  "/GasErrorHistoryBottom.csv"
  #define ERROR_LOG_FILE_TOTAL    "/TotalError.csv"
  #define SERVICE_DATA_FILE   "/ServiceData.csv"

  
  ProgramCopyWorker::ProgramCopyWorker(){
      m_bStop = false;
  }
  
  
  ProgramCopyWorker::ProgramCopyWorker(QString strDest){
      m_strDestDir = strDest;
  }
  
  void ProgramCopyWorker::setDestPath(QString strDest){
      m_strDestDir = strDest;
  }
  
  void ProgramCopyWorker::workerMain(){
      quint64 nTotalFileSize=0;
      quint64 nCpyFileSize=0;
      uint16_t nCurProgress=0;
      int nRemainSec = 0;
      QStringList strdirlist;

      QString srcFilepath;
      QString destFilePath;

      bool m_bRst=true;

      //make destination folder
      QDir destdir(m_strDestDir);
      if(!destdir.isRoot() && destdir.exists()==false){
          destdir.mkpath(m_strDestDir);
      }
      qDebug() << "Target Path is " << m_strDestDir;

      foreach(QString strinfo, m_arrSrcFileList){
          QString filepath = strinfo.left(strinfo.indexOf(',',0));

          QFileInfo finfo(filepath);

          nTotalFileSize+= finfo.size();        

      }

      qDebug() << "File List info : count = " << m_arrSrcFileList.size() << ", File Total Size = " << nTotalFileSize;

  
      foreach(QString srcpath, m_arrSrcDirList){
          nTotalFileSize += FileProcessor::getDirSize(srcpath);
      }

      qDebug() << " Dir List info : count = " << m_arrSrcFileList.size() << ", File Total Size = " << nTotalFileSize;
      if(nTotalFileSize <=0 ){

          emit errorFired("SIZE ERROR ");
          QThread::currentThread()->msleep(5000);

          emit finished();

          emit progressed(0,0);

          return;
      }

      foreach(QString strinfo, m_arrSrcFileList){
          QString filepath = strinfo.left(strinfo.indexOf(',',0));
          QString destfiledir = strinfo.right(strinfo.size() - (strinfo.indexOf(',',0)+1));
          QDir destdir(destfiledir);
          if(destdir.exists() == false) destdir.mkpath(destfiledir);

          QFileInfo finfo(filepath);
          srcFilepath = filepath;

          destFilePath = QString("%1/%2").arg(destfiledir).arg(finfo.fileName());

          if(QFile::exists(destFilePath)){
              QFile::rename(destFilePath, QString("%1.bak").arg(destFilePath));
          }

          if(QFile::copy(srcFilepath,destFilePath)==false){
              qDebug() << srcFilepath << " file copy fail!";
              m_bRst = false;
              emit errorFired(finfo.fileName());
              QThread::currentThread()->msleep(5000);
              break;
          }

          nCpyFileSize += finfo.size();
          nCurProgress = (nCpyFileSize *100) / nTotalFileSize;
          nRemainSec = (nTotalFileSize-nCpyFileSize)/200000;
          emit progressed(nCurProgress,nRemainSec);
          if(QThread::currentThread()->isInterruptionRequested()){
              sync();

              QThread::currentThread()->quit();
              break;
          }
          QThread::currentThread()->msleep(10);
      }

      qDebug() << "File List Copy Finished";

      if(QThread::currentThread()->isInterruptionRequested() == false || m_bRst == false){

          foreach(QString srcpath, m_arrSrcDirList){
              qDebug() << "src dir : " << srcpath;
  
              QDir srcdir(srcpath);

              if(srcdir.exists() == false){
                  qDebug() << "Source Dir is not exist";
                  m_bRst = false;
                  emit errorFired("DIR not exist");
                  QThread::currentThread()->msleep(5000);
                  break;
              }

              strdirlist.append(srcpath);
              FileProcessor::getAllDirList(srcdir, strdirlist);
              qDebug() << "dir size  : " <<strdirlist.size();
  
              QString targetpath =QString("%1%2").arg(m_strDestDir).arg(srcpath.mid(srcpath.lastIndexOf('/')));
              qDebug() << "target dir : " << targetpath;
  
              QDir destDir(targetpath);
              if(destDir.exists()) {

                  qDebug() << "rename target path";

                  QDir().rename(targetpath, QString("%1_").arg(targetpath));
              }
  
              foreach(QString strDir, strdirlist){
                  QDir srcItem(strDir);
                  srcItem.mkpath( QString(strDir).replace(srcpath,targetpath));

                  QFileInfoList strFileInfolist = srcItem.entryInfoList(QDir::Files |  QDir::NoSymLinks | QDir::NoDotAndDotDot);
                  foreach(QFileInfo finfo, strFileInfolist){
                      srcFilepath = finfo.absoluteFilePath();
                      destFilePath = QString("%1/%2").arg(QString(strDir).replace(srcpath,targetpath)).arg(finfo.fileName());

                      if(QFile::copy(srcFilepath, destFilePath)==false){

                          m_bRst = false;
                          emit errorFired(finfo.fileName());
                          qDebug() << srcFilepath << " file copy fail!";
                          QThread::currentThread()->msleep(5000);
                          break;

                      }

                      nCpyFileSize += finfo.size();
                      nCurProgress = (nCpyFileSize *100) / nTotalFileSize;
                      nRemainSec = (nTotalFileSize-nCpyFileSize)/200000;

                      //qDebug() << srcFilepath << destFilePath << "total size " << nTotalFileSize << "nCpyFileSize " << nCpyFileSize;

                      emit progressed(nCurProgress,nRemainSec);
                      if(QThread::currentThread()->isInterruptionRequested()){
                          sync();

                          break;
                      }

                      //QThread::currentThread()->msleep(100);

                  }

                  if(QThread::currentThread()->isInterruptionRequested() || m_bRst == false) break;

              }
              strdirlist.clear();
              if(QThread::currentThread()->isInterruptionRequested()) break;
          }
      }

      qDebug() << "File Copy Complete! SRC File Size = " << nTotalFileSize << "DEST File Size = " << nCpyFileSize;

      if(QThread::currentThread()->isInterruptionRequested() || m_bRst == false){

          foreach(QString strinfo, m_arrSrcFileList){
              QString filepath = strinfo.left(strinfo.indexOf(',',0)+1);
              QString destfiledir = strinfo.right(strinfo.size() - (strinfo.indexOf(',',0)+1));

              QFileInfo finfo(filepath);
              srcFilepath = filepath;

              destFilePath = QString("%1/%2").arg(destfiledir).arg(finfo.fileName());

              if(QFile::exists( QString("%1.bak").arg(destFilePath))){
                  QFile::remove(destFilePath);
                  QFile::rename(QString("%1.bak").arg(destFilePath), destFilePath);
                  nCpyFileSize -= finfo.size();
                  nCurProgress = (nCpyFileSize *100) / nTotalFileSize;
                  emit progressed(nCurProgress, nRemainSec);
              }
              QThread::currentThread()->msleep(1);
          }
          foreach(QString srcpath, m_arrSrcDirList){
              qDebug() << "src dir : " << srcpath;
  
              QDir srcdir(srcpath);
              QString targetpath =QString("%1%2").arg(m_strDestDir).arg(srcpath.mid(srcpath.lastIndexOf('/')));
              qDebug() << "target dir : " << targetpath;
  
              QDir destDir(targetpath);
              QDir renameDir(QString("%1_").arg(targetpath));
              if(renameDir.exists()) {
                  qDebug() << "remove target path";
                  destDir.removeRecursively();
                  QDir().rename(QString("%1_").arg(targetpath), targetpath);
              }
              emit progressed(0, 0);
          }
      }
      else{

          sync();
          foreach(QString strinfo, m_arrSrcFileList){
              QString filepath = strinfo.left(strinfo.indexOf(',',0));
              QString destfiledir = strinfo.right(strinfo.size() - (strinfo.indexOf(',',0)+1));
              QDir destdir(destfiledir);
              QFileInfo finfo(filepath);
              srcFilepath = filepath;
              destFilePath = QString("%1/%2.bak").arg(destfiledir).arg(finfo.fileName());
              qDebug() << destFilePath;
              if(QFile::exists(destFilePath)){
                  if(QFile(destFilePath).remove()==false){
                      qDebug() << destFilePath << "delete fail";
                  }
              }
              else qDebug() << "file not found error";
          }

          foreach(QString srcpath, m_arrSrcDirList){
              qDebug() << "src dir : " << srcpath;

              QDir srcdir(srcpath);

              QString targetpath =QString("%1%2").arg(m_strDestDir).arg(srcpath.mid(srcpath.lastIndexOf('/')));
              qDebug() << "target dir : " << targetpath;

              QDir destDir(targetpath);
              QDir renameDir(QString("%1_").arg(targetpath));
              if(renameDir.exists()) {
                  renameDir.removeRecursively();
              }
              emit progressed(0, 0);
          }
      }
      sync();
      emit finished();
  }
  
  void ProgramCopyWorker::addSrcDir(QString strDirPath){
      m_arrSrcDirList.append(strDirPath);
  }
  
  void ProgramCopyWorker::addSrcFile(QString strfilename){
      m_arrSrcFileList.append(strfilename);
  }
  
  void ProgramCopyWorker::workerStop(){
      //QMutexLocker locker(&m_mutex);
     // qDebug() << "stop thread";
     m_bStop = true;
  }

  FileProcessDlg::FileProcessDlg(QWidget *parent, ConfigType type, bool isDown) :
      QDialog(parent),
      ui(new Ui::FileProcessDlg)
  {
      ui->setupUi(this);
      setAttribute(Qt::WA_DeleteOnClose);
      setAttribute(Qt::WA_TranslucentBackground);
      setWindowFlags(Qt::FramelessWindowHint);

      qApp->setActiveWindow(this);
      this->setFocus();
      ui->ctrBtnCancel->setFocus();

  
      ui->ctrWjProcess->setMinimum(0);
      ui->ctrWjProcess->setMaximum(100);
  
      if(isDown){
          QPixmap pxmap;
          pxmap.load(":/images/config/102_usb_upload_icon.png");
          ui->label_2->setPixmap(pxmap);
      }
  
      switch(type){

      case config_haccp_data_download:
          QTimer::singleShot(100,this,SLOT(haccpdataDownload()));
          break;

      case config_info_data_download:
          QTimer::singleShot(100,this,SLOT(infodataDownload()));
          break;
      case config_service_data_download:
          QTimer::singleShot(100,this,SLOT(servicedataDownload()));
          break;
      case config_program_download:
          QTimer::singleShot(100,this,SLOT(programDownload()));
          break;
      case config_program_upload:
          QTimer::singleShot(100,this,SLOT(programUpload()));
          break;
      case config_set_download:
          QTimer::singleShot(100,this,SLOT(configDownload()));
          break;
      case config_set_upload:
          QTimer::singleShot(100,this,SLOT(configUpload()));
          break;

      case config_standard_info_upload:
          QTimer::singleShot(100,this,SLOT(standardInfoUpload()));
          break;

      default:
          QTimer::singleShot(200,this,SLOT(deleteLater()));
          break;
      }
  }
  
  FileProcessDlg::~FileProcessDlg()
  {
      delete ui;
  }
  
  void FileProcessDlg::on_ctrBtnCancel_clicked()
  {

  
      //emit stopcopy();
      programCopyThd.requestInterruption();
      //close();

  }

  void FileProcessDlg::saveHistoryLineData(QTextStream &out, uint16_t i,  uint16_t fired_cnt, time_t first_fired, time_t last_fried){
      QString strLine;
      QDateTime dt;
      //for(int i =0;i<m_arrErrorMaxIdx[(uint16_t)type];i++){
     //     err_item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[type][i]]);
          strLine = tr("erro%1,").arg(i);
          if(first_fired == 0){
              strLine += "-,0,-";
          }
          else{
              dt.setTime_t(first_fired);

              strLine+= Stringer::dateTime(dt,Stringer::OneLine) + ",";

              strLine += QString("%1").arg(fired_cnt) + ",";
              dt.setTime_t(last_fried);

              strLine += Stringer::dateTime(dt,Stringer::OneLine) + ",";

          }
          out << strLine << "
  ";
          qDebug() << strLine;
      //}
  }

  void FileProcessDlg::infodataDownload(){

      QString strUsbPath;
      QString strFile;
      QFile file;
      error_item *item;
      OvenStatistics *ovenst = OvenStatistics::getInstance();
      time_t firsttimebuf=0,lasttimebuf=0;
      uint16_t firecntbuf=0;
      uint16_t erridx = 0;
      int i;

      if(FileProcessor::detectUSB(strUsbPath)){
          //Top
          strFile = strUsbPath + ERROR_LOG_FILE_TOP;
          qDebug() << strUsbPath;
          file.setFileName(strFile);
          if(file.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)){
              QTextStream out(&file);
              out << tr("Gas Error History
  ") << "Top Ignition Box" <<"
  ";
              out << tr("no,") << tr("First Appearance,") << tr("Counter,") << tr("Last Appearance
  ");
              for(i =0;i<m_arrErrorMaxIdx[ERROR_HISTORY_UPPERBUNNER];i++){
                  item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[ERROR_HISTORY_UPPERBUNNER][i]]);
                  saveHistoryLineData(out,i+1,item->fired_cnt,item->first_fired,item->last_fried);
              }
              file.close();
          }
          ui->ctrWjProcess->setValue(25);
          ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 1초"));
          //Bottom
          strFile = strUsbPath + ERROR_LOG_FILE_BOTTOM;
          qDebug() << strUsbPath;
          file.setFileName(strFile);
          if(file.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)){
              QTextStream out(&file);
              out << tr("Gas Error History
  ") << "Bottom Ignition Box" <<"
  ";
              out << tr("no,") << tr("First Appearance,") << tr("Counter,") << tr("Last Appearance
  ");
              for(i =0;i<m_arrErrorMaxIdx[ERROR_HISTORY_LOWERBUNNER];i++){
                  item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[ERROR_HISTORY_LOWERBUNNER][i]]);
                  saveHistoryLineData(out,i+1,item->fired_cnt,item->first_fired,item->last_fried);
              }
              file.close();
          }
          ui->ctrWjProcess->setValue(50);
          ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 1초"));
          //Steam
          strFile = strUsbPath + ERROR_LOG_FILE_STEAM;
          qDebug() << strUsbPath;
          file.setFileName(strFile);
          if(file.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)){
              QTextStream out(&file);
              out << tr("Gas Error History
  ") << "Steam Ignition Box" <<"
  ";
              out << tr("no,") << tr("First Appearance,") << tr("Counter,") << tr("Last Appearance
  ");
              for(i =0;i<m_arrErrorMaxIdx[ERROR_HISTORY_STEAMBUNNER];i++){
                  item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[ERROR_HISTORY_STEAMBUNNER][i]]);
                  saveHistoryLineData(out,i+1,item->fired_cnt,item->first_fired,item->last_fried);
              }
              file.close();
          }
          ui->ctrWjProcess->setValue(75);
          ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 1초"));
          //Total
          strFile = strUsbPath + ERROR_LOG_FILE_TOTAL;
          qDebug() << strUsbPath;
          file.setFileName(strFile);
          if(file.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)){
              QTextStream out(&file);
              out << tr("Service Error History
  
  ");
              out << tr("no,") << tr("First Appearance,") << tr("Counter,") << tr("Last Appearance
  ");
              //01 상부 점화 장치 데이터 초기화
               firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              for(i=0;i<m_arrErrorMaxIdx[ERROR_HISTORY_UPPERBUNNER];i++){
                  item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[ERROR_HISTORY_UPPERBUNNER][i]]);
                 if(i==0) {firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;}
                 else{
                      if( (firsttimebuf > item->first_fired && item->first_fired != 0) || firsttimebuf == 0 ) firsttimebuf = item->first_fired;
                      if( lasttimebuf < item->last_fried ) lasttimebuf = item->last_fried;
                      firecntbuf += item->fired_cnt;
                 }
              }
              saveHistoryLineData(out,erridx+1, firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //02 스팀 점화 장치 데이터 초기화
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              for(i=0;i<m_arrErrorMaxIdx[ERROR_HISTORY_STEAMBUNNER];i++){
                  item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[ERROR_HISTORY_STEAMBUNNER][i]]);
                 if(i==0) {firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;}
                 else{
                      if((firsttimebuf > item->first_fired && item->first_fired != 0) || firsttimebuf == 0 ) firsttimebuf = item->first_fired;
                      if( lasttimebuf < item->last_fried ) lasttimebuf = item->last_fried;
                      firecntbuf += item->fired_cnt;
                 }
              }
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //03 하부 점화 장치 데이터 초기화
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              for(i=0;i<m_arrErrorMaxIdx[ERROR_HISTORY_LOWERBUNNER];i++){
                  item = &(ovenst->srvdata->err_log.values[m_arrErrorIdxs[ERROR_HISTORY_LOWERBUNNER][i]]);
                 if(i==0) {firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;}
                 else{
                      if((firsttimebuf > item->first_fired && item->first_fired != 0) || firsttimebuf == 0 ) firsttimebuf = item->first_fired;
                      if( lasttimebuf < item->last_fried ) lasttimebuf = item->last_fried;
                      firecntbuf += item->fired_cnt;
                 }
              }
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //04 WATER
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              item = &(ovenst->srvdata->err_log.items.inner_temp_fail);
              firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;
              item = &(ovenst->srvdata->err_log.items.qunching_temp_fail);
              if( firsttimebuf > item->first_fired && item->first_fired != 0 ) firsttimebuf = item->first_fired;
              if( lasttimebuf < item->last_fried ) lasttimebuf = item->last_fried;
              firecntbuf += item->fired_cnt;
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //05 구성품
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //07 B1 센서 에러
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              item = &(ovenst->srvdata->err_log.items.inner_temp_high_alarm);
              firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //08 B2 센서 에러
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              item = &(ovenst->srvdata->err_log.items.qunching_temp_high_alarm);
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //10 B4 센서 에러
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              item = &(ovenst->srvdata->err_log.items.wall_temp1_high_alarm);
              firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              //11 B5 센서 에러
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              item = &(ovenst->srvdata->err_log.items.steam_gen_temp_high_alram);
              firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              firecntbuf = 0;firsttimebuf =  0; lasttimebuf=0;
              item = &(ovenst->srvdata->err_log.items.water_level_sensor_fail);
              firsttimebuf = item->first_fired;lasttimebuf = item->last_fried;firecntbuf=item->fired_cnt;
              saveHistoryLineData(out, erridx,firecntbuf,firsttimebuf,lasttimebuf);erridx++;
              file.close();
          }

          sync();

          ui->ctrWjProcess->setValue(100);
          ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 완료"));
          QTimer::singleShot(1000,this,SLOT(close()));
      }

  }
  
  void FileProcessDlg::servicedataDownload(){

      QString strUsbPath;
      QString strHeader = "no,name,time
  ";
      QString strFile;
      QFile file;

      uint32_t timetemp, totaltime=0;
      int i = 1;
      OvenStatistics *ovs = OvenStatistics::getInstance();
      if(FileProcessor::detectUSB(strUsbPath)){
          strFile = strUsbPath + SERVICE_DATA_FILE;
          file.setFileName(strFile);
          if(file.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)){
              QTextStream out(&file);
              out.setCodec("UTF-8");
              out<< strHeader;
              timetemp = ovs->srvdata->use_log.items.steam_heat/3600;
              out << i++ << tr(",Steam Heating Time,") << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.dry_heat/3600;
              out << i++ << tr(",Hot Air Heating Time,") << timetemp << "h
  ";

              i=1;out<< strHeader;
              timetemp = ovs->srvdata->use_log.items.cook_dry_mode/3600;
              totaltime+= ovs->srvdata->use_log.items.cook_dry_mode;
              out << i++ << tr(",Hot Air Mode,") << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.cook_steam_mode/3600;
              totaltime +=  ovs->srvdata->use_log.items.cook_steam_mode;
              out << i++ << tr(",Steam Mode,") << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.cook_combi_mode/3600;
              totaltime += ovs->srvdata->use_log.items.cook_combi_mode;
              out << i++ << tr(",Combi Mode,") << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.wash_mode_nocleanser/3600;
              totaltime += ovs->srvdata->use_log.items.wash_mode_nocleanser;
              out << i++ << tr(",세제없이 헹굼,").toUtf8() << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.wash_mode_simple/3600;
              totaltime += ovs->srvdata->use_log.items.wash_mode_simple;
              out << i++ << tr(",간이세척,").toUtf8() << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.wash_mode_standard/3600;
              totaltime += ovs->srvdata->use_log.items.wash_mode_standard;
              out << i++ << tr(",표준세척,").toUtf8() << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.wash_mode_strong/3600;
              totaltime +=  ovs->srvdata->use_log.items.wash_mode_strong;
              out << i++ << tr(",강세척").toUtf8() << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.wash_mode_speed/3600;
              totaltime +=ovs->srvdata->use_log.items.wash_mode_speed;
              out << i++ << tr(",고속세척,").toUtf8() << timetemp << "h
  ";
              timetemp = ovs->srvdata->use_log.items.cooldown_mode/3600;
              totaltime += ovs->srvdata->use_log.items.cooldown_mode;
              out << i++ << tr(",쿨다운,").toUtf8() << timetemp << "h
  ";
              timetemp = totaltime/3600;
              out << i++ << tr(",전체작동시간,").toUtf8() << timetemp << "h
  ";

              i=1;out<< strHeader;
              timetemp = ovs->srvdata->use_log.items.door_open/60;
              out << i++ << tr(",도어 Open,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.dv_open/60;
              out << i++ << tr(",볼밸브 Open,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.ssv_open/60;
              out << i++ << tr(",S/G 급수 솔레노이드,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.qnv_open/60;
              out << i++ << tr(",퀀칭 솔레노이드,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.snv_open/60;
              out << i++ << tr(",고내살수 노즐 솔레노이드 ,").toUtf8() << timetemp << "min
  ";
              timetemp = 0;
              out << i++ << tr(",호스릴 솔레노이드,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.ssp_open/60;
              out << i++ << tr(",세제공급장치,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.hdm_open/60;
              out << i++ << tr(",배습댐퍼,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.dp_open/60;
              out << i++ << tr(",소형펌프모터,").toUtf8() << timetemp << "min
  ";
              timetemp = ovs->srvdata->use_log.items.unp_open/60;
              out << i++ << tr(",중형펌프모터,").toUtf8() << timetemp << "min
  ";
              ui->ctrWjProcess->setValue(100);
              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 완료"));
              file.close();
              sync();
              QTimer::singleShot(1000,this,SLOT(close()));
          }
      }

  }
  
  void FileProcessDlg::programDownload(){

      QString strDescPath;
      QString strSrcPath;
  
      if(FileProcessor::detectUSB(strDescPath)){

          worker.setDestPath(QString("%1/prime").arg(strDescPath));

          worker.addSrcDir("/prime/history");
          worker.addSrcDir("/prime/program");

          worker.moveToThread(&programCopyThd);

          connect(&programCopyThd,SIGNAL(started()), &worker, SLOT(workerMain()));
          connect(&worker, SIGNAL(progressed(int,int)), this, SLOT(onProgressed(int,int)));

          connect(&worker, SIGNAL(errorFired(QString)), this, SLOT(onErrorFired(QString)));

          connect(this, SIGNAL(stopcopy()), &worker, SLOT(workerStop()));
          connect(&worker, SIGNAL(finished()), &programCopyThd,SLOT(quit()));
          connect(&programCopyThd, SIGNAL(finished()), this, SLOT(onProgressFinished()));
          //connect(ui->ctrBtnCancel, SIGNAL(clicked(bool)), &worker, SLOT(workerStop()));
  
          programCopyThd.start();
          qDebug() << "thread start";
      }
      else{
          ui->ctrLbRemainTime->setText(tr("USB 인식을 실패하였습니다."));
          QTimer::singleShot(1000,this,SLOT(close()));
      }
  }
  
  void FileProcessDlg::onProgressFinished(){
      ui->ctrLbRemainTime->setText(tr("완료"));
      QTimer::singleShot(1000,this, SLOT(close()));
  }

  void FileProcessDlg::onErrorFired(QString Desc)
  {
      ui->ctrLbRemainTime->setText(QString("%1 %2").arg(Desc).arg(tr("에러 발생으로 종료합니다.")));
      //QTimer::singleShot(1000,this, SLOT(close()));
  }

  void FileProcessDlg::onProgressed(int progress, int sec){
      int min, _sec;
      QString strTemp;
      ui->ctrWjProcess->setValue(progress);
      min = sec/60;
      _sec = sec%60;
      if(min >0){

          strTemp = tr("남은 예상 시간 : %1분 %2초").arg(min).arg(_sec);

          ui->ctrLbRemainTime->setText(strTemp);
      }
      else{

          strTemp = tr("남은 예상 시간 : %1초").arg(_sec);

          ui->ctrLbRemainTime->setText(strTemp);
      }

  }
  
  void FileProcessDlg::programUpload(){

      QString strDescPath;
      QString strSrcPath;
  
      if(FileProcessor::detectUSB(strSrcPath)){

          worker.addSrcFile(QString("%1/prime/superdaemon,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/superdaemon.ini,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/app-prime-gui,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/app-prime-modbus,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/service-web,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/app-prime-gui.md5,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/app-prime-modbus.md5,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/superdaemon.ini.md5,/prime").arg(strSrcPath));
          worker.addSrcFile(QString("%1/prime/superdaemon.md5,/prime").arg(strSrcPath));
          worker.setDestPath("/prime");

          //worker.addSrcDir(QString("%1/%2").arg(strSrcPath,"prime/cookbook")); //쿡북 복사 삭제

          worker.addSrcDir(QString("%1/%2").arg(strSrcPath,"prime/templates"));
          worker.addSrcDir(QString("%1/%2").arg(strSrcPath,"prime/sounds"));

          worker.moveToThread(&programCopyThd);
  
          connect(&programCopyThd,SIGNAL(started()), &worker, SLOT(workerMain()));
          connect(&worker, SIGNAL(progressed(int,int)), this, SLOT(onProgressed(int,int)));

          connect(&worker,SIGNAL(errorFired(QString)),this,SLOT(onErrorFired(QString)));

          connect(this, SIGNAL(stopcopy()), &worker, SLOT(workerStop()));
          connect(&worker, SIGNAL(finished()), &programCopyThd,SLOT(quit()));
          connect(&programCopyThd, SIGNAL(finished()), this, SLOT(onProgressFinished()));
          //connect(ui->ctrBtnCancel, SIGNAL(clicked(bool)), &worker, SLOT(workerStop()));

          programCopyThd.start();
          qDebug() << "thread start";
      }
      else{
          ui->ctrLbRemainTime->setText(tr("USB 인식을 실패하였습니다."));
          QTimer::singleShot(1000,this,SLOT(close()));
      }

  }
  
  void FileProcessDlg::configDownload(){
      QString strUsbPath;

      QString strSrcPath;

      if(FileProcessor::detectUSB(strUsbPath)){

          strSrcPath = QString("%1/%2").arg(strUsbPath).arg(CONFIG_FILE_NAME);
          QFileInfo finfo(strSrcPath);
          QDir fdir = finfo.absoluteDir();
          if(finfo.absoluteDir().exists() == false) fdir.mkpath(finfo.absolutePath());

          QFile file;

          file.setFileName(strSrcPath);

          if(file.exists()) file.remove();

          if(QFile::copy(CONFIG_FILE_NAME, strSrcPath)){

              sync();
              ui->ctrWjProcess->setValue(50);
              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 1초"));
          }
          else{
              ui->ctrLbRemainTime->setText(tr("설정 다운로드에 실패하였습니다."));
              QTimer::singleShot(1000,this,SLOT(close()));
              return;
          }

          strSrcPath = QString("%1/%2").arg(strUsbPath).arg(FAVORITE_FILE_NAME);
          file.setFileName(strSrcPath);

          if(file.exists()) file.remove();

          if(QFile::copy(FAVORITE_FILE_NAME, strSrcPath)){

              sync();

              ui->ctrWjProcess->setValue(100);

              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 완료"));
              QTimer::singleShot(1000,this,SLOT(close()));
          }
          else{

              ui->ctrLbRemainTime->setText(tr("즐겨찾기 다운로드에 실패하였습니다."));

              QTimer::singleShot(1000,this,SLOT(close()));
          }
      }
      else{

          ui->ctrLbRemainTime->setText(tr("USB 인식을 실패하였습니다."));

          QTimer::singleShot(1000,this,SLOT(close()));
      }
  }
  
  void FileProcessDlg::configUpload(){

      uint8_t buff[sizeof(config_lists)+1];

      qint64 readlen;

      QString strUsbPath;

      QString strSrcPath;

      Config *cfg = Config::getInstance();

      if(FileProcessor::detectUSB(strUsbPath)){

          strSrcPath = QString("%1%2").arg(strUsbPath).arg(CONFIG_FILE_NAME);

          QFile srcFile(strSrcPath);
          //Check Source File is valid this machine

          if(srcFile.open(QIODevice::ReadOnly)){

              readlen = srcFile.read((char *) buff,sizeof(config_lists)+1);

              srcFile.close();
              if(readlen != (sizeof(config_lists)+1)) {
                  qDebug() << "SRC config.ini file size wrong";
                  ui->ctrLbRemainTime->setText(tr("설정 업로드에 실패하였습니다."));
                  QTimer::singleShot(1000,this,SLOT(close()));
                  return;
              }

              if(buff[sizeof(config_lists)] != 0x9C){

                  qDebug() << "SRC config.ini file check fail";
                  ui->ctrLbRemainTime->setText(tr("설정 업로드에 실패하였습니다."));
                  QTimer::singleShot(1000,this,SLOT(close()));
                  return;
              }

              cfg->copyConfigArea((char *) buff);

              cfg->saveConfig();

              cfg->applyConfig();

          }
          else{

              qDebug() << "SRC config.ini file open fail";

              ui->ctrLbRemainTime->setText(tr("설정 업로드에 실패하였습니다."));
              QTimer::singleShot(1000,this,SLOT(close()));
              return;
          }

          strSrcPath = QString("%1/%2").arg(strUsbPath).arg(FAVORITE_FILE_NAME);

          QFile file(FAVORITE_FILE_NAME);

          file.remove();
          if(QFile::copy( strSrcPath , FAVORITE_FILE_NAME)){

              sync();
              cfg->loadFavorite();

              ui->ctrWjProcess->setValue(100);
              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 완료"));
              QTimer::singleShot(1000,this,SLOT(close()));
          }
          else{

              ui->ctrLbRemainTime->setText(tr("즐겨찾기 업로드에 실패하였습니다."));

              QTimer::singleShot(1000,this,SLOT(close()));
          }
      }
      else{

          ui->ctrLbRemainTime->setText(tr("USB 인식을 실패하였습니다."));

          QTimer::singleShot(1000,this,SLOT(close()));
      }
  }

  
  void FileProcessDlg::haccpdataDownload(){
      ui->ctrWjProcess->setValue(100);
      ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 완료"));
      QTimer::singleShot(1000,this,SLOT(close()));
  }

  void FileProcessDlg::standardInfoUpload()
  {
      QString strUsbPath;
      QString strSrcPath;

      if(FileProcessor::detectUSB(strUsbPath)){

          strSrcPath = QString("%1%2").arg(strUsbPath).arg(MODEL_INFO_FILE_NAME);
          qDebug() <<strSrcPath;

          QFile file(MODEL_INFO_FILE_NAME);
          file.remove();

          sync();

          if(QFile::copy( strSrcPath ,MODEL_INFO_FILE_NAME)){
              sync();
              ui->ctrWjProcess->setValue(40);
              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 2초"));
          }
          else{
              ui->ctrLbRemainTime->setText(tr("모델 정보 업로드에 실패하였습니다."));
              QTimer::singleShot(1000,this,SLOT(close()));
              return;
          }
          //QThread::msleep(800);
          file.setFileName(CHEF_INFO_FILE_NAME);
          file.remove();

          sync();
          strSrcPath = QString("%1%2").arg(strUsbPath).arg(CHEF_INFO_FILE_NAME);

          qDebug() << strSrcPath;
          if(QFile::copy( strSrcPath ,CHEF_INFO_FILE_NAME)){
              sync();
              ui->ctrWjProcess->setValue(70);
              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 1"));
              QTimer::singleShot(1000,this,SLOT(close()));
          }
          else{
              ui->ctrLbRemainTime->setText(tr("핫라인 쉐프 정보 업로드에 실패하였습니다."));
              QTimer::singleShot(1000,this,SLOT(close()));
          }
          //QThread::msleep(800);
          file.setFileName(SERVICE_INFO_FILE_NAME);
          file.remove();

          sync();
          strSrcPath = QString("%1%2").arg(strUsbPath).arg(SERVICE_INFO_FILE_NAME);

          qDebug() << strSrcPath;
          if(QFile::copy( strSrcPath ,SERVICE_INFO_FILE_NAME)){
              sync();
              ui->ctrWjProcess->setValue(100);
              ui->ctrLbRemainTime->setText(tr("남은 예상 시간 : 완료"));
              qDebug() << "standard upload success";
              QTimer::singleShot(1000,this,SLOT(close()));
          }
          else{
              ui->ctrLbRemainTime->setText(tr("핫라인 서비스 정보 업로드에 실패하였습니다."));
              QTimer::singleShot(1000,this,SLOT(close()));
          }
      }
      else{
          ui->ctrLbRemainTime->setText(tr("USB 인식을 실패하였습니다."));
          QTimer::singleShot(1000,this,SLOT(close()));
      }
  }

  void FileProcessDlg::keyPressEvent(QKeyEvent */*event*/){

  
  }
  
  void FileProcessDlg::keyReleaseEvent(QKeyEvent *event){
      switch (event->key())
      {
      case 0x01000031:    // Push
      {
          QPushButton *btn = qobject_cast<QPushButton*>(focusWidget());
          if(btn != NULL){
              btn->click();
          }
          break;
      }
      }
  }