/*
   * Configuation settings for the Freescale MCF5329 FireEngine board.
   *
   * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
   * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  /*
   * board/config.h - configuration options, board specific
   */
  
  #ifndef _M5329EVB_H
  #define _M5329EVB_H
  
  /*
   * High Level Configuration Options
   * (easy to change)
   */
  
  #define CONFIG_MCFUART
  #define CONFIG_SYS_UART_PORT		(0)
  #define CONFIG_BAUDRATE		115200
  
  #undef CONFIG_WATCHDOG
  #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
  
  /* Command line configuration */
  #include <config_cmd_default.h>
  
  #define CONFIG_CMD_CACHE
  #define CONFIG_CMD_DATE
  #define CONFIG_CMD_ELF
  #define CONFIG_CMD_FLASH
  #define CONFIG_CMD_I2C
  #define CONFIG_CMD_MEMORY
  #define CONFIG_CMD_MISC
  #define CONFIG_CMD_MII
  #define CONFIG_CMD_NET
  #define CONFIG_CMD_PING
  #define CONFIG_CMD_REGINFO
  
  #ifdef CONFIG_NANDFLASH_SIZE
  #      define CONFIG_CMD_NAND
  #endif
  
  #define CONFIG_SYS_UNIFY_CACHE
  
  #define CONFIG_MCFFEC
  #ifdef CONFIG_MCFFEC
  #	define CONFIG_MII		1
  #	define CONFIG_MII_INIT		1
  #	define CONFIG_SYS_DISCOVER_PHY
  #	define CONFIG_SYS_RX_ETH_BUFFER	8
  #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  
  #	define CONFIG_SYS_FEC0_PINMUX		0
  #	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
  #	define MCFFEC_TOUT_LOOP		50000
  /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  #	ifndef CONFIG_SYS_DISCOVER_PHY
  #		define FECDUPLEX	FULL
  #		define FECSPEED		_100BASET
  #	else
  #		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  #			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  #		endif
  #	endif			/* CONFIG_SYS_DISCOVER_PHY */
  #endif
  
  #define CONFIG_MCFRTC
  #undef RTC_DEBUG
  
  /* Timer */
  #define CONFIG_MCFTMR
  #undef CONFIG_MCFPIT
  
  /* I2C */
  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_FSL
  #define CONFIG_SYS_FSL_I2C_SPEED	80000
  #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
  #define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
  #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
  
  #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
  #define CONFIG_UDP_CHECKSUM
  
  #ifdef CONFIG_MCFFEC
  #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
  #	define CONFIG_IPADDR	192.162.1.2
  #	define CONFIG_NETMASK	255.255.255.0
  #	define CONFIG_SERVERIP	192.162.1.1
  #	define CONFIG_GATEWAYIP	192.162.1.1
  #	define CONFIG_OVERWRITE_ETHADDR_ONCE
  #endif				/* FEC_ENET */
  
  #define CONFIG_HOSTNAME		M5329EVB
  #define CONFIG_EXTRA_ENV_SETTINGS					\
  	"netdev=eth0\0"			\
  	"loadaddr=40010000\0"	\
  	"u-boot=u-boot.bin\0"	\
  	"load=tftp ${loadaddr) ${u-boot}\0"	\
  	"upd=run load; run prog\0"	\
  	"prog=prot off 0 3ffff;"	\
  	"era 0 3ffff;"	\
  	"cp.b ${loadaddr} 0 ${filesize};"	\
  	"save\0"	\
  	""
  
  #define CONFIG_PRAM		512	/* 512 KB */
  #define CONFIG_SYS_PROMPT		"-> "
  #define CONFIG_SYS_LONGHELP		/* undef to save memory */
  
  #ifdef CONFIG_CMD_KGDB
  #	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
  #else
  #	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
  #endif
  
  #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
  #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
  #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
  #define CONFIG_SYS_LOAD_ADDR		0x40010000
  
  #define CONFIG_SYS_CLK			80000000
  #define CONFIG_SYS_CPU_CLK		CONFIG_SYS_CLK * 3
  
  #define CONFIG_SYS_MBAR		0xFC000000
  
  #define CONFIG_SYS_LATCH_ADDR		(CONFIG_SYS_CS1_BASE + 0x80000)
  
  /*
   * Low Level Configuration Settings
   * (address mappings, register initial values, etc.)
   * You should know what you are doing if you make changes here.
   */
  /*-----------------------------------------------------------------------
   * Definitions for initial stack pointer and data area (in DPRAM)
   */
  #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
  #define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in internal SRAM */
  #define CONFIG_SYS_INIT_RAM_CTRL	0x221
  #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
  #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
  
  /*-----------------------------------------------------------------------
   * Start addresses for the final memory configuration
   * (Set up by the startup code)
   * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
   */
  #define CONFIG_SYS_SDRAM_BASE		0x40000000
  #define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
  #define CONFIG_SYS_SDRAM_CFG1		0x53722730
  #define CONFIG_SYS_SDRAM_CFG2		0x56670000
  #define CONFIG_SYS_SDRAM_CTRL		0xE1092000
  #define CONFIG_SYS_SDRAM_EMOD		0x40010000
  #define CONFIG_SYS_SDRAM_MODE		0x018D0000
  
  #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
  #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
  
  #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
  #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
  
  #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
  #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
  
  /*
   * For booting Linux, the board info and command line data
   * have to be in the first 8 MB of memory, since this is
   * the maximum mapped by the Linux kernel during initialization ??
   */
  #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
  #define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
  
  /*-----------------------------------------------------------------------
   * FLASH organization
   */
  #define CONFIG_SYS_FLASH_CFI
  #ifdef CONFIG_SYS_FLASH_CFI
  #	define CONFIG_FLASH_CFI_DRIVER	1
  #	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
  #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
  #	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
  #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
  #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
  #endif
  
  #ifdef CONFIG_NANDFLASH_SIZE
  #	define CONFIG_SYS_MAX_NAND_DEVICE	1
  #	define CONFIG_SYS_NAND_BASE		CONFIG_SYS_CS2_BASE
  #	define CONFIG_SYS_NAND_SIZE		1
  #	define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
  #	define NAND_ALLOW_ERASE_ALL	1
  #	define CONFIG_JFFS2_NAND	1
  #	define CONFIG_JFFS2_DEV		"nand0"
  #	define CONFIG_JFFS2_PART_SIZE	(CONFIG_SYS_CS2_MASK & ~1)
  #	define CONFIG_JFFS2_PART_OFFSET	0x00000000
  #endif
  
  #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
  
  /* Configuration for environment
   * Environment is embedded in u-boot in the second sector of the flash
   */
  #define CONFIG_ENV_OFFSET		0x4000
  #define CONFIG_ENV_SECT_SIZE	0x2000
  #define CONFIG_ENV_IS_IN_FLASH	1
  
  /*-----------------------------------------------------------------------
   * Cache Configuration
   */
  #define CONFIG_SYS_CACHELINE_SIZE	16
  
  #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
  					 CONFIG_SYS_INIT_RAM_SIZE - 8)
  #define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
  					 CONFIG_SYS_INIT_RAM_SIZE - 4)
  #define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
  #define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
  					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
  					 CF_ACR_EN | CF_ACR_SM_ALL)
  #define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
  					 CF_CACR_DCM_P)
  
  /*-----------------------------------------------------------------------
   * Chipselect bank definitions
   */
  /*
   * CS0 - NOR Flash 1, 2, 4, or 8MB
   * CS1 - CompactFlash and registers
   * CS2 - NAND Flash 16, 32, or 64MB
   * CS3 - Available
   * CS4 - Available
   * CS5 - Available
   */
  #define CONFIG_SYS_CS0_BASE		0
  #define CONFIG_SYS_CS0_MASK		0x007f0001
  #define CONFIG_SYS_CS0_CTRL		0x00001fa0
  
  #define CONFIG_SYS_CS1_BASE		0x10000000
  #define CONFIG_SYS_CS1_MASK		0x001f0001
  #define CONFIG_SYS_CS1_CTRL		0x002A3780
  
  #ifdef CONFIG_NANDFLASH_SIZE
  #define CONFIG_SYS_CS2_BASE		0x20000000
  #define CONFIG_SYS_CS2_MASK		((CONFIG_NANDFLASH_SIZE << 20) | 1)
  #define CONFIG_SYS_CS2_CTRL		0x00001f60
  #endif
  
  #endif				/* _M5329EVB_H */