#
  # Input core configuration
  #
  config SERIO
  	tristate "Serial I/O support"
  	default y
  	help
  	  Say Yes here if you have any input device that uses serial I/O to
  	  communicate with the system. This includes the
  	  		* standard AT keyboard and PS/2 mouse *
  	  as well as serial mice, Sun keyboards, some joysticks and 6dof
  	  devices and more.
  
  	  If unsure, say Y.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called serio.
  
  config ARCH_MIGHT_HAVE_PC_SERIO
  	bool
  	help
  	  Select this config option from the architecture Kconfig if
  	  the architecture might use a PC serio device (i8042) to
  	  communicate with keyboard, mouse, etc.
  
  if SERIO
  
  config SERIO_I8042
  	tristate "i8042 PC Keyboard controller"
  	default y
  	depends on ARCH_MIGHT_HAVE_PC_SERIO
  	help
  	  i8042 is the chip over which the standard AT keyboard and PS/2
  	  mouse are connected to the computer. If you use these devices,
  	  you'll need to say Y here.
  
  	  If unsure, say Y.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called i8042.
  
  config SERIO_SERPORT
  	tristate "Serial port line discipline"
  	default y
  	depends on TTY
  	help
  	  Say Y here if you plan to use an input device (mouse, joystick,
  	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
  
  	  More information is available: <file:Documentation/input/input.txt>
  
  	  If unsure, say Y.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called serport.
  
  config SERIO_CT82C710
  	tristate "ct82c710 Aux port controller"
  	depends on X86
  	help
  	  Say Y here if you have a Texas Instruments TravelMate notebook
  	  equipped with the ct82c710 chip and want to use a mouse connected
  	  to the "QuickPort".
  
  	  If unsure, say N.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ct82c710.
  
  config SERIO_Q40KBD
  	tristate "Q40 keyboard controller"
  	depends on Q40
  
  config SERIO_PARKBD
  	tristate "Parallel port keyboard adapter"
  	depends on PARPORT
  	help
  	  Say Y here if you built a simple parallel port adapter to attach
  	  an additional AT keyboard, XT keyboard or PS/2 mouse.
  
  	  More information is available: <file:Documentation/input/input.txt>
  
  	  If unsure, say N.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called parkbd.
  
  config SERIO_RPCKBD
  	tristate "Acorn RiscPC keyboard controller"
  	depends on ARCH_ACORN
  	default y
  	help
  	  Say Y here if you have the Acorn RiscPC and want to use an AT
  	  keyboard connected to its keyboard controller.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called rpckbd.
  
  config SERIO_AT32PSIF
  	tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
  	depends on AVR32
  	help
  	  Say Y here if you want to use the PSIF peripheral on AVR32 devices
  	  and connect a PS/2 keyboard and/or mouse to it.
  
  	  To compile this driver as a module, choose M here: the module will
  	  be called at32psif.
  
  config SERIO_AMBAKMI
  	tristate "AMBA KMI keyboard controller"
  	depends on ARM_AMBA
  
  config SERIO_SA1111
  	tristate "Intel SA1111 keyboard controller"
  	depends on SA1111
  
  config SERIO_GSCPS2
  	tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
  	depends on GSC
  	default y
  	help
  	  This driver provides support for the PS/2 ports on PA-RISC machines
  	  over which HP PS/2 keyboards and PS/2 mice may be connected.
  	  If you use these devices, you'll need to say Y here.
  
  	  It's safe to enable this driver, so if unsure, say Y.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called gscps2.
  
  config HP_SDC
  	tristate "HP System Device Controller i8042 Support"
  	depends on (GSC || HP300) && SERIO
  	default y
  	help
  	  This option enables support for the "System Device
  	  Controller", an i8042 carrying microcode to manage a
  	  few miscellaneous devices on some Hewlett Packard systems.
  	  The SDC itself contains a 10ms resolution timer/clock capable
  	  of delivering interrupts on a periodic and one-shot basis.
  	  The SDC may also be connected to a battery-backed real-time
  	  clock, a basic audio waveform generator, and an HP-HIL Master
  	  Link Controller serving up to seven input devices.
  
  	  By itself this option is rather useless, but enabling it will
  	  enable selection of drivers for the abovementioned devices.
  	  It is, however, incompatible with the old, reliable HIL keyboard
  	  driver, and the new HIL driver is experimental, so if you plan
  	  to use a HIL keyboard as your primary keyboard, you may wish
  	  to keep using that driver until the new HIL drivers have had
  	  more testing.
  
  config HIL_MLC
  	tristate "HIL MLC Support (needed for HIL input devices)"
  	depends on HP_SDC
  
  config SERIO_PCIPS2
  	tristate "PCI PS/2 keyboard and PS/2 mouse controller"
  	depends on PCI
  	help
  	  Say Y here if you have a Mobility Docking station with PS/2
  	  keyboard and mice ports.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called pcips2.
  
  config SERIO_MACEPS2
  	tristate "SGI O2 MACE PS/2 controller"
  	depends on SGI_IP32
  	help
  	  Say Y here if you have SGI O2 workstation and want to use its
  	  PS/2 ports.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called maceps2.
  
  config SERIO_LIBPS2
  	tristate "PS/2 driver library"
  	depends on SERIO_I8042 || SERIO_I8042=n
  	help
  	  Say Y here if you are using a driver for device connected
  	  to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called libps2.
  
  config SERIO_RAW
  	tristate "Raw access to serio ports"
  	help
  	  Say Y here if you want to have raw access to serio ports, such as
  	  AUX ports on i8042 keyboard controller. Each serio port that is
  	  bound to this driver will be accessible via a char device with
  	  major 10 and dynamically allocated minor. The driver will try
  	  allocating minor 1 (that historically corresponds to /dev/psaux)
  	  first. To bind this driver to a serio port use sysfs interface:
  
  	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called serio_raw.
  
  config SERIO_XILINX_XPS_PS2
  	tristate "Xilinx XPS PS/2 Controller Support"
  	depends on PPC || MICROBLAZE
  	help
  	  This driver supports XPS PS/2 IP from the Xilinx EDK on
  	  PowerPC platform.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called xilinx_ps2.
  
  config SERIO_ALTERA_PS2
  	tristate "Altera UP PS/2 controller"
  	depends on HAS_IOMEM
  	help
  	  Say Y here if you have Altera University Program PS/2 ports.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called altera_ps2.
  
  config SERIO_AMS_DELTA
  	tristate "Amstrad Delta (E3) mailboard support"
  	depends on MACH_AMS_DELTA
  	default y
  	---help---
  	  Say Y here if you have an E3 and want to use its mailboard,
  	  or any standard AT keyboard connected to the mailboard port.
  
  	  When used for the E3 mailboard, a non-standard key table
  	  must be loaded from userspace, possibly using udev extras
  	  provided keymap helper utility.
  
  	  To compile this driver as a module, choose M here;
  	  the module will be called ams_delta_serio.
  
  config SERIO_PS2MULT
  	tristate "TQC PS/2 multiplexer"
  	help
  	  Say Y here if you have the PS/2 line multiplexer like the one
  	  present on TQC boards.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ps2mult.
  
  config SERIO_ARC_PS2
  	tristate "ARC PS/2 support"
  	help
  	  Say Y here if you have an ARC FPGA platform with a PS/2
  	  controller in it.
  
  	  To compile this driver as a module, choose M here; the module
  	  will be called arc_ps2.
  
  config SERIO_APBPS2
  	tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller"
  	depends on OF
  	help
  	  Say Y here if you want support for GRLIB APBPS2 peripherals used
  	  to connect to PS/2 keyboard and/or mouse.
  
  	  To compile this driver as a module, choose M here: the module will
  	  be called apbps2.
  
  config SERIO_OLPC_APSP
  	tristate "OLPC AP-SP input support"
  	depends on OF
  	help
  	  Say Y here if you want support for the keyboard and touchpad included
  	  in the OLPC XO-1.75 and XO-4 laptops.
  
  	  To compile this driver as a module, choose M here: the module will
  	  be called olpc_apsp.
  
  config HYPERV_KEYBOARD
  	tristate "Microsoft Synthetic Keyboard driver"
  	depends on HYPERV
  	default HYPERV
  	help
  	  Select this option to enable the Hyper-V Keyboard driver.
  
  	  To compile this driver as a module, choose M here: the module will
  	  be called hyperv_keyboard.
  
  endif