/*
   * workqueue.h --- work queue handling for Linux.
   */
  
  #ifndef _LINUX_WORKQUEUE_H
  #define _LINUX_WORKQUEUE_H
  
  #include <linux/timer.h>
  #include <linux/linkage.h>
  #include <linux/bitops.h>
  #include <linux/lockdep.h>
  #include <linux/threads.h>
  #include <linux/atomic.h>
  #include <linux/cpumask.h>
  
  struct workqueue_struct;
  
  struct work_struct;
  typedef void (*work_func_t)(struct work_struct *work);
  void delayed_work_timer_fn(unsigned long __data);
  
  /*
   * The first word is the work queue pointer and the flags rolled into
   * one
   */
  #define work_data_bits(work) ((unsigned long *)(&(work)->data))
  
  enum {
  	WORK_STRUCT_PENDING_BIT	= 0,	/* work item is pending execution */
  	WORK_STRUCT_DELAYED_BIT	= 1,	/* work item is delayed */
  	WORK_STRUCT_PWQ_BIT	= 2,	/* data points to pwq */
  	WORK_STRUCT_LINKED_BIT	= 3,	/* next work is linked to this one */
  #ifdef CONFIG_DEBUG_OBJECTS_WORK
  	WORK_STRUCT_STATIC_BIT	= 4,	/* static initializer (debugobjects) */
  	WORK_STRUCT_COLOR_SHIFT	= 5,	/* color for workqueue flushing */
  #else
  	WORK_STRUCT_COLOR_SHIFT	= 4,	/* color for workqueue flushing */
  #endif
  
  	WORK_STRUCT_COLOR_BITS	= 4,
  
  	WORK_STRUCT_PENDING	= 1 << WORK_STRUCT_PENDING_BIT,
  	WORK_STRUCT_DELAYED	= 1 << WORK_STRUCT_DELAYED_BIT,
  	WORK_STRUCT_PWQ		= 1 << WORK_STRUCT_PWQ_BIT,
  	WORK_STRUCT_LINKED	= 1 << WORK_STRUCT_LINKED_BIT,
  #ifdef CONFIG_DEBUG_OBJECTS_WORK
  	WORK_STRUCT_STATIC	= 1 << WORK_STRUCT_STATIC_BIT,
  #else
  	WORK_STRUCT_STATIC	= 0,
  #endif
  
  	/*
  	 * The last color is no color used for works which don't
  	 * participate in workqueue flushing.
  	 */
  	WORK_NR_COLORS		= (1 << WORK_STRUCT_COLOR_BITS) - 1,
  	WORK_NO_COLOR		= WORK_NR_COLORS,
  
  	/* special cpu IDs */
  	WORK_CPU_UNBOUND	= NR_CPUS,
  	WORK_CPU_END		= NR_CPUS + 1,
  
  	/*
  	 * Reserve 7 bits off of pwq pointer w/ debugobjects turned off.
  	 * This makes pwqs aligned to 256 bytes and allows 15 workqueue
  	 * flush colors.
  	 */
  	WORK_STRUCT_FLAG_BITS	= WORK_STRUCT_COLOR_SHIFT +
  				  WORK_STRUCT_COLOR_BITS,
  
  	/* data contains off-queue information when !WORK_STRUCT_PWQ */
  	WORK_OFFQ_FLAG_BASE	= WORK_STRUCT_COLOR_SHIFT,
  
  	WORK_OFFQ_CANCELING	= (1 << WORK_OFFQ_FLAG_BASE),
  
  	/*
  	 * When a work item is off queue, its high bits point to the last
  	 * pool it was on.  Cap at 31 bits and use the highest number to
  	 * indicate that no pool is associated.
  	 */
  	WORK_OFFQ_FLAG_BITS	= 1,
  	WORK_OFFQ_POOL_SHIFT	= WORK_OFFQ_FLAG_BASE + WORK_OFFQ_FLAG_BITS,
  	WORK_OFFQ_LEFT		= BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT,
  	WORK_OFFQ_POOL_BITS	= WORK_OFFQ_LEFT <= 31 ? WORK_OFFQ_LEFT : 31,
  	WORK_OFFQ_POOL_NONE	= (1LU << WORK_OFFQ_POOL_BITS) - 1,
  
  	/* convenience constants */
  	WORK_STRUCT_FLAG_MASK	= (1UL << WORK_STRUCT_FLAG_BITS) - 1,
  	WORK_STRUCT_WQ_DATA_MASK = ~WORK_STRUCT_FLAG_MASK,
  	WORK_STRUCT_NO_POOL	= (unsigned long)WORK_OFFQ_POOL_NONE << WORK_OFFQ_POOL_SHIFT,
  
  	/* bit mask for work_busy() return values */
  	WORK_BUSY_PENDING	= 1 << 0,
  	WORK_BUSY_RUNNING	= 1 << 1,
  
  	/* maximum string length for set_worker_desc() */
  	WORKER_DESC_LEN		= 24,
  };
  
  struct work_struct {
  	atomic_long_t data;
  	struct list_head entry;
  	work_func_t func;
  #ifdef CONFIG_LOCKDEP
  	struct lockdep_map lockdep_map;
  #endif
  };
  
  #define WORK_DATA_INIT()	ATOMIC_LONG_INIT(WORK_STRUCT_NO_POOL)
  #define WORK_DATA_STATIC_INIT()	\
  	ATOMIC_LONG_INIT(WORK_STRUCT_NO_POOL | WORK_STRUCT_STATIC)
  
  struct delayed_work {
  	struct work_struct work;
  	struct timer_list timer;
  
  	/* target workqueue and CPU ->timer uses to queue ->work */
  	struct workqueue_struct *wq;
  	int cpu;
  };
  
  /*
   * A struct for workqueue attributes.  This can be used to change
   * attributes of an unbound workqueue.
   *
   * Unlike other fields, ->no_numa isn't a property of a worker_pool.  It
   * only modifies how apply_workqueue_attrs() select pools and thus doesn't
   * participate in pool hash calculations or equality comparisons.
   */
  struct workqueue_attrs {
  	int			nice;		/* nice level */
  	cpumask_var_t		cpumask;	/* allowed CPUs */
  	bool			no_numa;	/* disable NUMA affinity */
  };
  
  static inline struct delayed_work *to_delayed_work(struct work_struct *work)
  {
  	return container_of(work, struct delayed_work, work);
  }
  
  struct execute_work {
  	struct work_struct work;
  };
  
  #ifdef CONFIG_LOCKDEP
  /*
   * NB: because we have to copy the lockdep_map, setting _key
   * here is required, otherwise it could get initialised to the
   * copy of the lockdep_map!
   */
  #define __WORK_INIT_LOCKDEP_MAP(n, k) \
  	.lockdep_map = STATIC_LOCKDEP_MAP_INIT(n, k),
  #else
  #define __WORK_INIT_LOCKDEP_MAP(n, k)
  #endif
  
  #define __WORK_INITIALIZER(n, f) {					\
  	.data = WORK_DATA_STATIC_INIT(),				\
  	.entry	= { &(n).entry, &(n).entry },				\
  	.func = (f),							\
  	__WORK_INIT_LOCKDEP_MAP(#n, &(n))				\
  	}
  
  #define __DELAYED_WORK_INITIALIZER(n, f, tflags) {			\
  	.work = __WORK_INITIALIZER((n).work, (f)),			\
  	.timer = __TIMER_INITIALIZER(delayed_work_timer_fn,		\
  				     0, (unsigned long)&(n),		\
  				     (tflags) | TIMER_IRQSAFE),		\
  	}
  
  #define DECLARE_WORK(n, f)						\
  	struct work_struct n = __WORK_INITIALIZER(n, f)
  
  #define DECLARE_DELAYED_WORK(n, f)					\
  	struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f, 0)
  
  #define DECLARE_DEFERRABLE_WORK(n, f)					\
  	struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f, TIMER_DEFERRABLE)
  
  /*
   * initialize a work item's function pointer
   */
  #define PREPARE_WORK(_work, _func)					\
  	do {								\
  		(_work)->func = (_func);				\
  	} while (0)
  
  #define PREPARE_DELAYED_WORK(_work, _func)				\
  	PREPARE_WORK(&(_work)->work, (_func))
  
  #ifdef CONFIG_DEBUG_OBJECTS_WORK
  extern void __init_work(struct work_struct *work, int onstack);
  extern void destroy_work_on_stack(struct work_struct *work);
  static inline unsigned int work_static(struct work_struct *work)
  {
  	return *work_data_bits(work) & WORK_STRUCT_STATIC;
  }
  #else
  static inline void __init_work(struct work_struct *work, int onstack) { }
  static inline void destroy_work_on_stack(struct work_struct *work) { }
  static inline unsigned int work_static(struct work_struct *work) { return 0; }
  #endif
  
  /*
   * initialize all of a work item in one go
   *
   * NOTE! No point in using "atomic_long_set()": using a direct
   * assignment of the work data initializer allows the compiler
   * to generate better code.
   */
  #ifdef CONFIG_LOCKDEP
  #define __INIT_WORK(_work, _func, _onstack)				\
  	do {								\
  		static struct lock_class_key __key;			\
  									\
  		__init_work((_work), _onstack);				\
  		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
  		lockdep_init_map(&(_work)->lockdep_map, #_work, &__key, 0); \
  		INIT_LIST_HEAD(&(_work)->entry);			\
  		PREPARE_WORK((_work), (_func));				\
  	} while (0)
  #else
  #define __INIT_WORK(_work, _func, _onstack)				\
  	do {								\
  		__init_work((_work), _onstack);				\
  		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
  		INIT_LIST_HEAD(&(_work)->entry);			\
  		PREPARE_WORK((_work), (_func));				\
  	} while (0)
  #endif
  
  #define INIT_WORK(_work, _func)						\
  	do {								\
  		__INIT_WORK((_work), (_func), 0);			\
  	} while (0)
  
  #define INIT_WORK_ONSTACK(_work, _func)					\
  	do {								\
  		__INIT_WORK((_work), (_func), 1);			\
  	} while (0)
  
  #define __INIT_DELAYED_WORK(_work, _func, _tflags)			\
  	do {								\
  		INIT_WORK(&(_work)->work, (_func));			\
  		__setup_timer(&(_work)->timer, delayed_work_timer_fn,	\
  			      (unsigned long)(_work),			\
  			      (_tflags) | TIMER_IRQSAFE);		\
  	} while (0)
  
  #define __INIT_DELAYED_WORK_ONSTACK(_work, _func, _tflags)		\
  	do {								\
  		INIT_WORK_ONSTACK(&(_work)->work, (_func));		\
  		__setup_timer_on_stack(&(_work)->timer,			\
  				       delayed_work_timer_fn,		\
  				       (unsigned long)(_work),		\
  				       (_tflags) | TIMER_IRQSAFE);	\
  	} while (0)
  
  #define INIT_DELAYED_WORK(_work, _func)					\
  	__INIT_DELAYED_WORK(_work, _func, 0)
  
  #define INIT_DELAYED_WORK_ONSTACK(_work, _func)				\
  	__INIT_DELAYED_WORK_ONSTACK(_work, _func, 0)
  
  #define INIT_DEFERRABLE_WORK(_work, _func)				\
  	__INIT_DELAYED_WORK(_work, _func, TIMER_DEFERRABLE)
  
  #define INIT_DEFERRABLE_WORK_ONSTACK(_work, _func)			\
  	__INIT_DELAYED_WORK_ONSTACK(_work, _func, TIMER_DEFERRABLE)
  
  /**
   * work_pending - Find out whether a work item is currently pending
   * @work: The work item in question
   */
  #define work_pending(work) \
  	test_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
  
  /**
   * delayed_work_pending - Find out whether a delayable work item is currently
   * pending
   * @work: The work item in question
   */
  #define delayed_work_pending(w) \
  	work_pending(&(w)->work)
  
  /**
   * work_clear_pending - for internal use only, mark a work item as not pending
   * @work: The work item in question
   */
  #define work_clear_pending(work) \
  	clear_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
  
  /*
   * Workqueue flags and constants.  For details, please refer to
   * Documentation/workqueue.txt.
   */
  enum {
  	/*
  	 * All wqs are now non-reentrant making the following flag
  	 * meaningless.  Will be removed.
  	 */
  	WQ_NON_REENTRANT	= 1 << 0, /* DEPRECATED */
  
  	WQ_UNBOUND		= 1 << 1, /* not bound to any cpu */
  	WQ_FREEZABLE		= 1 << 2, /* freeze during suspend */
  	WQ_MEM_RECLAIM		= 1 << 3, /* may be used for memory reclaim */
  	WQ_HIGHPRI		= 1 << 4, /* high priority */
  	WQ_CPU_INTENSIVE	= 1 << 5, /* cpu instensive workqueue */
  	WQ_SYSFS		= 1 << 6, /* visible in sysfs, see wq_sysfs_register() */
  
  	/*
  	 * Per-cpu workqueues are generally preferred because they tend to
  	 * show better performance thanks to cache locality.  Per-cpu
  	 * workqueues exclude the scheduler from choosing the CPU to
  	 * execute the worker threads, which has an unfortunate side effect
  	 * of increasing power consumption.
  	 *
  	 * The scheduler considers a CPU idle if it doesn't have any task
  	 * to execute and tries to keep idle cores idle to conserve power;
  	 * however, for example, a per-cpu work item scheduled from an
  	 * interrupt handler on an idle CPU will force the scheduler to
  	 * excute the work item on that CPU breaking the idleness, which in
  	 * turn may lead to more scheduling choices which are sub-optimal
  	 * in terms of power consumption.
  	 *
  	 * Workqueues marked with WQ_POWER_EFFICIENT are per-cpu by default
  	 * but become unbound if workqueue.power_efficient kernel param is
  	 * specified.  Per-cpu workqueues which are identified to
  	 * contribute significantly to power-consumption are identified and
  	 * marked with this flag and enabling the power_efficient mode
  	 * leads to noticeable power saving at the cost of small
  	 * performance disadvantage.
  	 *
  	 * http://thread.gmane.org/gmane.linux.kernel/1480396
  	 */
  	WQ_POWER_EFFICIENT	= 1 << 7,
  
  	__WQ_DRAINING		= 1 << 16, /* internal: workqueue is draining */
  	__WQ_ORDERED		= 1 << 17, /* internal: workqueue is ordered */
  
  	WQ_MAX_ACTIVE		= 512,	  /* I like 512, better ideas? */
  	WQ_MAX_UNBOUND_PER_CPU	= 4,	  /* 4 * #cpus for unbound wq */
  	WQ_DFL_ACTIVE		= WQ_MAX_ACTIVE / 2,
  };
  
  /* unbound wq's aren't per-cpu, scale max_active according to #cpus */
  #define WQ_UNBOUND_MAX_ACTIVE	\
  	max_t(int, WQ_MAX_ACTIVE, num_possible_cpus() * WQ_MAX_UNBOUND_PER_CPU)
  
  /*
   * System-wide workqueues which are always present.
   *
   * system_wq is the one used by schedule[_delayed]_work[_on]().
   * Multi-CPU multi-threaded.  There are users which expect relatively
   * short queue flush time.  Don't queue works which can run for too
   * long.
   *
   * system_long_wq is similar to system_wq but may host long running
   * works.  Queue flushing might take relatively long.
   *
   * system_unbound_wq is unbound workqueue.  Workers are not bound to
   * any specific CPU, not concurrency managed, and all queued works are
   * executed immediately as long as max_active limit is not reached and
   * resources are available.
   *
   * system_freezable_wq is equivalent to system_wq except that it's
   * freezable.
   *
   * *_power_efficient_wq are inclined towards saving power and converted
   * into WQ_UNBOUND variants if 'wq_power_efficient' is enabled; otherwise,
   * they are same as their non-power-efficient counterparts - e.g.
   * system_power_efficient_wq is identical to system_wq if
   * 'wq_power_efficient' is disabled.  See WQ_POWER_EFFICIENT for more info.
   */
  extern struct workqueue_struct *system_wq;
  extern struct workqueue_struct *system_long_wq;
  extern struct workqueue_struct *system_unbound_wq;
  extern struct workqueue_struct *system_freezable_wq;
  extern struct workqueue_struct *system_power_efficient_wq;
  extern struct workqueue_struct *system_freezable_power_efficient_wq;
  
  static inline struct workqueue_struct * __deprecated __system_nrt_wq(void)
  {
  	return system_wq;
  }
  
  static inline struct workqueue_struct * __deprecated __system_nrt_freezable_wq(void)
  {
  	return system_freezable_wq;
  }
  
  /* equivlalent to system_wq and system_freezable_wq, deprecated */
  #define system_nrt_wq			__system_nrt_wq()
  #define system_nrt_freezable_wq		__system_nrt_freezable_wq()
  
  extern struct workqueue_struct *
  __alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active,
  	struct lock_class_key *key, const char *lock_name, ...) __printf(1, 6);
  
  /**
   * alloc_workqueue - allocate a workqueue
   * @fmt: printf format for the name of the workqueue
   * @flags: WQ_* flags
   * @max_active: max in-flight work items, 0 for default
   * @args: args for @fmt
   *
   * Allocate a workqueue with the specified parameters.  For detailed
   * information on WQ_* flags, please refer to Documentation/workqueue.txt.
   *
   * The __lock_name macro dance is to guarantee that single lock_class_key
   * doesn't end up with different namesm, which isn't allowed by lockdep.
   *
   * RETURNS:
   * Pointer to the allocated workqueue on success, %NULL on failure.
   */
  #ifdef CONFIG_LOCKDEP
  #define alloc_workqueue(fmt, flags, max_active, args...)		\
  ({									\
  	static struct lock_class_key __key;				\
  	const char *__lock_name;					\
  									\
  	__lock_name = #fmt#args;					\
  									\
  	__alloc_workqueue_key((fmt), (flags), (max_active),		\
  			      &__key, __lock_name, ##args);		\
  })
  #else
  #define alloc_workqueue(fmt, flags, max_active, args...)		\
  	__alloc_workqueue_key((fmt), (flags), (max_active),		\
  			      NULL, NULL, ##args)
  #endif
  
  /**
   * alloc_ordered_workqueue - allocate an ordered workqueue
   * @fmt: printf format for the name of the workqueue
   * @flags: WQ_* flags (only WQ_FREEZABLE and WQ_MEM_RECLAIM are meaningful)
   * @args: args for @fmt
   *
   * Allocate an ordered workqueue.  An ordered workqueue executes at
   * most one work item at any given time in the queued order.  They are
   * implemented as unbound workqueues with @max_active of one.
   *
   * RETURNS:
   * Pointer to the allocated workqueue on success, %NULL on failure.
   */
  #define alloc_ordered_workqueue(fmt, flags, args...)			\
  	alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args)
  
  #define create_workqueue(name)						\
  	alloc_workqueue("%s", WQ_MEM_RECLAIM, 1, (name))
  #define create_freezable_workqueue(name)				\
  	alloc_workqueue("%s", WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, \
  			1, (name))
  #define create_singlethread_workqueue(name)				\
  	alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name)
  
  extern void destroy_workqueue(struct workqueue_struct *wq);
  
  struct workqueue_attrs *alloc_workqueue_attrs(gfp_t gfp_mask);
  void free_workqueue_attrs(struct workqueue_attrs *attrs);
  int apply_workqueue_attrs(struct workqueue_struct *wq,
  			  const struct workqueue_attrs *attrs);
  
  extern bool queue_work_on(int cpu, struct workqueue_struct *wq,
  			struct work_struct *work);
  extern bool queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
  			struct delayed_work *work, unsigned long delay);
  extern bool mod_delayed_work_on(int cpu, struct workqueue_struct *wq,
  			struct delayed_work *dwork, unsigned long delay);
  
  extern void flush_workqueue(struct workqueue_struct *wq);
  extern void drain_workqueue(struct workqueue_struct *wq);
  extern void flush_scheduled_work(void);
  
  extern int schedule_on_each_cpu(work_func_t func);
  
  int execute_in_process_context(work_func_t fn, struct execute_work *);
  
  extern bool flush_work(struct work_struct *work);
  extern bool cancel_work_sync(struct work_struct *work);
  
  extern bool flush_delayed_work(struct delayed_work *dwork);
  extern bool cancel_delayed_work(struct delayed_work *dwork);
  extern bool cancel_delayed_work_sync(struct delayed_work *dwork);
  
  extern void workqueue_set_max_active(struct workqueue_struct *wq,
  				     int max_active);
  extern bool current_is_workqueue_rescuer(void);
  extern bool workqueue_congested(int cpu, struct workqueue_struct *wq);
  extern unsigned int work_busy(struct work_struct *work);
  extern __printf(1, 2) void set_worker_desc(const char *fmt, ...);
  extern void print_worker_info(const char *log_lvl, struct task_struct *task);
  
  /**
   * queue_work - queue work on a workqueue
   * @wq: workqueue to use
   * @work: work to queue
   *
   * Returns %false if @work was already on a queue, %true otherwise.
   *
   * We queue the work to the CPU on which it was submitted, but if the CPU dies
   * it can be processed by another CPU.
   */
  static inline bool queue_work(struct workqueue_struct *wq,
  			      struct work_struct *work)
  {
  	return queue_work_on(WORK_CPU_UNBOUND, wq, work);
  }
  
  /**
   * queue_delayed_work - queue work on a workqueue after delay
   * @wq: workqueue to use
   * @dwork: delayable work to queue
   * @delay: number of jiffies to wait before queueing
   *
   * Equivalent to queue_delayed_work_on() but tries to use the local CPU.
   */
  static inline bool queue_delayed_work(struct workqueue_struct *wq,
  				      struct delayed_work *dwork,
  				      unsigned long delay)
  {
  	return queue_delayed_work_on(WORK_CPU_UNBOUND, wq, dwork, delay);
  }
  
  /**
   * mod_delayed_work - modify delay of or queue a delayed work
   * @wq: workqueue to use
   * @dwork: work to queue
   * @delay: number of jiffies to wait before queueing
   *
   * mod_delayed_work_on() on local CPU.
   */
  static inline bool mod_delayed_work(struct workqueue_struct *wq,
  				    struct delayed_work *dwork,
  				    unsigned long delay)
  {
  	return mod_delayed_work_on(WORK_CPU_UNBOUND, wq, dwork, delay);
  }
  
  /**
   * schedule_work_on - put work task on a specific cpu
   * @cpu: cpu to put the work task on
   * @work: job to be done
   *
   * This puts a job on a specific cpu
   */
  static inline bool schedule_work_on(int cpu, struct work_struct *work)
  {
  	return queue_work_on(cpu, system_wq, work);
  }
  
  /**
   * schedule_work - put work task in global workqueue
   * @work: job to be done
   *
   * Returns %false if @work was already on the kernel-global workqueue and
   * %true otherwise.
   *
   * This puts a job in the kernel-global workqueue if it was not already
   * queued and leaves it in the same position on the kernel-global
   * workqueue otherwise.
   */
  static inline bool schedule_work(struct work_struct *work)
  {
  	return queue_work(system_wq, work);
  }
  
  /**
   * schedule_delayed_work_on - queue work in global workqueue on CPU after delay
   * @cpu: cpu to use
   * @dwork: job to be done
   * @delay: number of jiffies to wait
   *
   * After waiting for a given time this puts a job in the kernel-global
   * workqueue on the specified CPU.
   */
  static inline bool schedule_delayed_work_on(int cpu, struct delayed_work *dwork,
  					    unsigned long delay)
  {
  	return queue_delayed_work_on(cpu, system_wq, dwork, delay);
  }
  
  /**
   * schedule_delayed_work - put work task in global workqueue after delay
   * @dwork: job to be done
   * @delay: number of jiffies to wait or 0 for immediate execution
   *
   * After waiting for a given time this puts a job in the kernel-global
   * workqueue.
   */
  static inline bool schedule_delayed_work(struct delayed_work *dwork,
  					 unsigned long delay)
  {
  	return queue_delayed_work(system_wq, dwork, delay);
  }
  
  /**
   * keventd_up - is workqueue initialized yet?
   */
  static inline bool keventd_up(void)
  {
  	return system_wq != NULL;
  }
  
  /*
   * Like above, but uses del_timer() instead of del_timer_sync(). This means,
   * if it returns 0 the timer function may be running and the queueing is in
   * progress.
   */
  static inline bool __deprecated __cancel_delayed_work(struct delayed_work *work)
  {
  	bool ret;
  
  	ret = del_timer(&work->timer);
  	if (ret)
  		work_clear_pending(&work->work);
  	return ret;
  }
  
  /* used to be different but now identical to flush_work(), deprecated */
  static inline bool __deprecated flush_work_sync(struct work_struct *work)
  {
  	return flush_work(work);
  }
  
  /* used to be different but now identical to flush_delayed_work(), deprecated */
  static inline bool __deprecated flush_delayed_work_sync(struct delayed_work *dwork)
  {
  	return flush_delayed_work(dwork);
  }
  
  #ifndef CONFIG_SMP
  static inline long work_on_cpu(int cpu, long (*fn)(void *), void *arg)
  {
  	return fn(arg);
  }
  #else
  long work_on_cpu(int cpu, long (*fn)(void *), void *arg);
  #endif /* CONFIG_SMP */
  
  #ifdef CONFIG_FREEZER
  extern void freeze_workqueues_begin(void);
  extern bool freeze_workqueues_busy(void);
  extern void thaw_workqueues(void);
  #endif /* CONFIG_FREEZER */
  
  #ifdef CONFIG_SYSFS
  int workqueue_sysfs_register(struct workqueue_struct *wq);
  #else	/* CONFIG_SYSFS */
  static inline int workqueue_sysfs_register(struct workqueue_struct *wq)
  { return 0; }
  #endif	/* CONFIG_SYSFS */
  
  #endif