/*
   * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   *
   * (C) Copyright 2009 Freescale Semiconductor, Inc.
   *
   * Configuration settings for the MX51EVK Board
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
   /* High Level Configuration Options */
  
  #define CONFIG_MX51	/* in a mx51 */
  
  #define CONFIG_DISPLAY_CPUINFO
  #define CONFIG_DISPLAY_BOARDINFO
  
  #define CONFIG_SYS_TEXT_BASE	0x97800000
  
  #include <asm/arch/imx-regs.h>
  
  #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
  #define CONFIG_SETUP_MEMORY_TAGS
  #define CONFIG_INITRD_TAG
  #define CONFIG_REVISION_TAG
  #define CONFIG_SYS_GENERIC_BOARD
  
  #define CONFIG_OF_LIBFDT
  
  #define CONFIG_MACH_TYPE	MACH_TYPE_MX51_BABBAGE
  /*
   * Size of malloc() pool
   */
  #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
  
  #define CONFIG_BOARD_LATE_INIT
  
  /*
   * Hardware drivers
   */
  #define CONFIG_FSL_IIM
  #define CONFIG_CMD_FUSE
  
  #define CONFIG_MXC_UART
  #define CONFIG_MXC_UART_BASE	UART1_BASE
  #define CONFIG_MXC_GPIO
  
  /*
   * SPI Configs
   * */
  #define CONFIG_CMD_SPI
  
  #define CONFIG_MXC_SPI
  
  /* PMIC Controller */
  #define CONFIG_POWER
  #define CONFIG_POWER_SPI
  #define CONFIG_POWER_FSL
  #define CONFIG_FSL_PMIC_BUS	0
  #define CONFIG_FSL_PMIC_CS	0
  #define CONFIG_FSL_PMIC_CLK	2500000
  #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
  #define CONFIG_FSL_PMIC_BITLEN	32
  #define CONFIG_RTC_MC13XXX
  
  /*
   * MMC Configs
   * */
  #define CONFIG_FSL_ESDHC
  #define CONFIG_SYS_FSL_ESDHC_ADDR	MMC_SDHC1_BASE_ADDR
  #define CONFIG_SYS_FSL_ESDHC_NUM	2
  
  #define CONFIG_MMC
  
  #define CONFIG_CMD_MMC
  #define CONFIG_GENERIC_MMC
  #define CONFIG_CMD_FAT
  #define CONFIG_DOS_PARTITION
  
  /*
   * Eth Configs
   */
  #define CONFIG_MII
  
  #define CONFIG_FEC_MXC
  #define IMX_FEC_BASE	FEC_BASE_ADDR
  #define CONFIG_FEC_MXC_PHYADDR	0x1F
  
  #define CONFIG_CMD_PING
  #define CONFIG_CMD_DHCP
  #define CONFIG_CMD_MII
  #define CONFIG_CMD_NET
  
  /* USB Configs */
  #define CONFIG_CMD_USB
  #define CONFIG_CMD_FAT
  #define CONFIG_USB_EHCI
  #define CONFIG_USB_EHCI_MX5
  #define CONFIG_USB_STORAGE
  #define CONFIG_USB_HOST_ETHER
  #define CONFIG_USB_ETHER_ASIX
  #define CONFIG_USB_ETHER_SMSC95XX
  #define CONFIG_MXC_USB_PORT	1
  #define CONFIG_MXC_USB_PORTSC	PORT_PTS_ULPI
  #define CONFIG_MXC_USB_FLAGS	MXC_EHCI_POWER_PINS_ENABLED
  
  /* Framebuffer and LCD */
  #define CONFIG_PREBOOT
  #define CONFIG_VIDEO
  #define CONFIG_VIDEO_IPUV3
  #define CONFIG_CFB_CONSOLE
  #define CONFIG_VGA_AS_SINGLE_DEVICE
  #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  #define CONFIG_VIDEO_BMP_RLE8
  #define CONFIG_SPLASH_SCREEN
  #define CONFIG_BMP_16BPP
  #define CONFIG_VIDEO_LOGO
  #define CONFIG_IPUV3_CLK	133000000
  
  /* allow to overwrite serial and ethaddr */
  #define CONFIG_ENV_OVERWRITE
  #define CONFIG_CONS_INDEX		1
  #define CONFIG_BAUDRATE			115200
  
  /***********************************************************
   * Command definition
   ***********************************************************/
  
  #include <config_cmd_default.h>
  #define CONFIG_CMD_BOOTZ
  #undef CONFIG_CMD_IMLS
  
  #define CONFIG_CMD_DATE
  
  #define CONFIG_BOOTDELAY	1
  
  #define CONFIG_ETHPRIME		"FEC0"
  
  #define CONFIG_LOADADDR		0x92000000	/* loadaddr env var */
  
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"script=boot.scr\0" \
  	"image=zImage\0" \
  	"fdt_file=imx51-babbage.dtb\0" \
  	"fdt_addr=0x91000000\0" \
  	"boot_fdt=try\0" \
  	"ip_dyn=yes\0" \
  	"mmcdev=0\0" \
  	"mmcpart=1\0" \
  	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
  		"root=${mmcroot}\0" \
  	"loadbootscript=" \
  		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  	"bootscript=echo Running bootscript from mmc ...; " \
  		"source\0" \
  	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  	"mmcboot=echo Booting from mmc ...; " \
  		"run mmcargs; " \
  		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  			"if run loadfdt; then " \
  				"bootz ${loadaddr} - ${fdt_addr}; " \
  			"else " \
  				"if test ${boot_fdt} = try; then " \
  					"bootz; " \
  				"else " \
  					"echo WARN: Cannot load the DT; " \
  				"fi; " \
  			"fi; " \
  		"else " \
  			"bootz; " \
  		"fi;\0" \
  	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
  		"root=/dev/nfs " \
  		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  	"netboot=echo Booting from net ...; " \
  		"run netargs; " \
  		"if test ${ip_dyn} = yes; then " \
  			"setenv get_cmd dhcp; " \
  		"else " \
  			"setenv get_cmd tftp; " \
  		"fi; " \
  		"${get_cmd} ${image}; " \
  		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
  			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  				"bootz ${loadaddr} - ${fdt_addr}; " \
  			"else " \
  				"if test ${boot_fdt} = try; then " \
  					"bootz; " \
  				"else " \
  					"echo ERROR: Cannot load the DT; " \
  					"exit; " \
  				"fi; " \
  			"fi; " \
  		"else " \
  			"bootz; " \
  		"fi;\0"
  
  #define CONFIG_BOOTCOMMAND \
  	"mmc dev ${mmcdev}; if mmc rescan; then " \
  		"if run loadbootscript; then " \
  			"run bootscript; " \
  		"else " \
  			"if run loadimage; then " \
  				"run mmcboot; " \
  			"else run netboot; " \
  			"fi; " \
  		"fi; " \
  	"else run netboot; fi"
  
  #define CONFIG_ARP_TIMEOUT	200UL
  
  /*
   * Miscellaneous configurable options
   */
  #define CONFIG_SYS_LONGHELP		/* undef to save memory */
  #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
  #define CONFIG_AUTO_COMPLETE
  #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
  #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
  #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
  
  #define CONFIG_SYS_MEMTEST_START       0x90000000
  #define CONFIG_SYS_MEMTEST_END         0x90010000
  
  #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
  
  #define CONFIG_CMDLINE_EDITING
  
  /*-----------------------------------------------------------------------
   * Physical Memory Map
   */
  #define CONFIG_NR_DRAM_BANKS	1
  #define PHYS_SDRAM_1		CSD0_BASE_ADDR
  #define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
  
  #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
  #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
  #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
  
  #define CONFIG_BOARD_EARLY_INIT_F
  
  #define CONFIG_SYS_INIT_SP_OFFSET \
  	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_ADDR \
  	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  
  #define CONFIG_SYS_DDR_CLKSEL	0
  #define CONFIG_SYS_CLKTL_CBCDR	0x59E35100
  #define CONFIG_SYS_MAIN_PWR_ON
  
  /*-----------------------------------------------------------------------
   * FLASH and environment organization
   */
  #define CONFIG_SYS_NO_FLASH
  
  #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
  #define CONFIG_ENV_SIZE        (8 * 1024)
  #define CONFIG_ENV_IS_IN_MMC
  #define CONFIG_SYS_MMC_ENV_DEV 0
  
  #endif