menuconfig SND_HDA_INTEL
  	tristate "Intel HD Audio"
  	select SND_PCM
  	select SND_VMASTER
  	select SND_KCTL_JACK
  	help
  	  Say Y here to include support for Intel "High Definition
  	  Audio" (Azalia) and its compatible devices.
  
  	  This option enables the HD-audio controller.  Don't forget
  	  to choose the appropriate codec options below.
  
  	  To compile this driver as a module, choose M here: the module
  	  will be called snd-hda-intel.
  
  if SND_HDA_INTEL
  
  config SND_HDA_DSP_LOADER
  	bool
  
  config SND_HDA_PREALLOC_SIZE
  	int "Pre-allocated buffer size for HD-audio driver"
  	range 0 32768
  	default 64
  	help
  	  Specifies the default pre-allocated buffer-size in kB for the
  	  HD-audio driver.  A larger buffer (e.g. 2048) is preferred
  	  for systems using PulseAudio.  The default 64 is chosen just
  	  for compatibility reasons.
  
  	  Note that the pre-allocation size can be changed dynamically
  	  via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too.
  
  config SND_HDA_HWDEP
  	bool "Build hwdep interface for HD-audio driver"
  	select SND_HWDEP
  	help
  	  Say Y here to build a hwdep interface for HD-audio driver.
  	  This interface can be used for out-of-band communication
  	  with codecs for debugging purposes.
  
  config SND_HDA_RECONFIG
  	bool "Allow dynamic codec reconfiguration"
  	depends on SND_HDA_HWDEP
  	help
  	  Say Y here to enable the HD-audio codec re-configuration feature.
  	  This adds the sysfs interfaces to allow user to clear the whole
  	  codec configuration, change the codec setup, add extra verbs,
  	  and re-configure the codec dynamically.
  
  config SND_HDA_INPUT_BEEP
  	bool "Support digital beep via input layer"
  	depends on INPUT=y || INPUT=SND_HDA_INTEL
  	help
  	  Say Y here to build a digital beep interface for HD-audio
  	  driver. This interface is used to generate digital beeps.
  
  config SND_HDA_INPUT_BEEP_MODE
  	int "Digital beep registration mode (0=off, 1=on)"
  	depends on SND_HDA_INPUT_BEEP=y
  	default "1"
  	range 0 1
  	help
  	  Set 0 to disable the digital beep interface for HD-audio by default.
  	  Set 1 to always enable the digital beep interface for HD-audio by
  	  default.
  
  config SND_HDA_INPUT_JACK
  	bool "Support jack plugging notification via input layer"
  	depends on INPUT=y || INPUT=SND
  	select SND_JACK
  	help
  	  Say Y here to enable the jack plugging notification via
  	  input layer.
  
  config SND_HDA_PATCH_LOADER
  	bool "Support initialization patch loading for HD-audio"
  	select FW_LOADER
  	select SND_HDA_HWDEP
  	select SND_HDA_RECONFIG
  	help
  	  Say Y here to allow the HD-audio driver to load a pseudo
  	  firmware file ("patch") for overriding the BIOS setup at
  	  start up.  The "patch" file can be specified via patch module
  	  option, such as patch=hda-init.
  
  	  This option turns on hwdep and reconfig features automatically.
  
  config SND_HDA_CODEC_REALTEK
  	tristate "Build Realtek HD-audio codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include Realtek HD-audio codec support in
  	  snd-hda-intel driver, such as ALC880.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_REALTEK=m
  
  config SND_HDA_CODEC_ANALOG
  	tristate "Build Analog Device HD-audio codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include Analog Device HD-audio codec support in
  	  snd-hda-intel driver, such as AD1986A.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_ANALOG=m
  
  config SND_HDA_CODEC_SIGMATEL
  	tristate "Build IDT/Sigmatel HD-audio codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
  	  snd-hda-intel driver, such as STAC9200.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_SIGMATEL=m
  
  config SND_HDA_CODEC_VIA
  	tristate "Build VIA HD-audio codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include VIA HD-audio codec support in
  	  snd-hda-intel driver, such as VT1708.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_VIA=m
  
  config SND_HDA_CODEC_HDMI
  	tristate "Build HDMI/DisplayPort HD-audio codec support"
  	help
  	  Say Y or M here to include HDMI and DisplayPort HD-audio codec
  	  support in snd-hda-intel driver.  This includes all AMD/ATI,
  	  Intel and Nvidia HDMI/DisplayPort codecs.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_HDMI=m
  
  config SND_HDA_I915
  	bool
  	default y
  	depends on DRM_I915
  
  config SND_HDA_CODEC_CIRRUS
  	tristate "Build Cirrus Logic codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include Cirrus Logic codec support in
  	  snd-hda-intel driver, such as CS4206.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CIRRUS=m
  
  config SND_HDA_CODEC_CONEXANT
  	tristate "Build Conexant HD-audio codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include Conexant HD-audio codec support in
  	  snd-hda-intel driver, such as CX20549.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CONEXANT=m
  
  config SND_HDA_CODEC_CA0110
  	tristate "Build Creative CA0110-IBG codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include Creative CA0110-IBG codec support in
  	  snd-hda-intel driver, found on some Creative X-Fi cards.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CA0110=m
  
  config SND_HDA_CODEC_CA0132
  	tristate "Build Creative CA0132 codec support"
  	help
  	  Say Y or M here to include Creative CA0132 codec support in
  	  snd-hda-intel driver.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CA0132=m
  
  config SND_HDA_CODEC_CA0132_DSP
  	bool "Support new DSP code for CA0132 codec"
  	depends on SND_HDA_CODEC_CA0132
  	select SND_HDA_DSP_LOADER
  	select FW_LOADER
  	help
  	  Say Y here to enable the DSP for Creative CA0132 for extended
  	  features like equalizer or echo cancellation.
  
  	  Note that this option requires the external firmware file
  	  (ctefx.bin).
  
  config SND_HDA_CODEC_CMEDIA
  	tristate "Build C-Media HD-audio codec support"
  	select SND_HDA_GENERIC
  	help
  	  Say Y or M here to include C-Media HD-audio codec support in
  	  snd-hda-intel driver, such as CMI9880.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CMEDIA=m
  
  config SND_HDA_CODEC_SI3054
  	tristate "Build Silicon Labs 3054 HD-modem codec support"
  	help
  	  Say Y or M here to include Silicon Labs 3054 HD-modem codec
  	  (and compatibles) support in snd-hda-intel driver.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_CODEC_SI3054=m
  
  config SND_HDA_GENERIC
  	tristate "Enable generic HD-audio codec parser"
  	help
  	  Say Y or M here to enable the generic HD-audio codec parser
  	  in snd-hda-intel driver.
  
  comment "Set to Y if you want auto-loading the codec driver"
  	depends on SND_HDA_INTEL=y && SND_HDA_GENERIC=m
  
  config SND_HDA_POWER_SAVE_DEFAULT
  	int "Default time-out for HD-audio power-save mode"
  	depends on PM
  	default 0
  	help
  	  The default time-out value in seconds for HD-audio automatic
  	  power-save mode.  0 means to disable the power-save mode.
  
  endif