/*
   * This file is provided under a dual BSD/GPLv2 license.  When using or
   * redistributing this file, you may do so under either license.
   *
   * GPL LICENSE SUMMARY
   *
   * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of version 2 of the GNU General Public License as
   * published by the Free Software Foundation.
   *
   * This program is distributed in the hope that it will be useful, but
   * WITHOUT ANY WARRANTY; without even the implied warranty of
   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   * General Public License for more details.
   *
   * You should have received a copy of the GNU General Public License
   * along with this program; if not, write to the Free Software
   * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
   * The full GNU General Public License is included in this distribution
   * in the file called LICENSE.GPL.
   *
   * BSD LICENSE
   *
   * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
   * All rights reserved.
   *
   * Redistribution and use in source and binary forms, with or without
   * modification, are permitted provided that the following conditions
   * are met:
   *
   *   * Redistributions of source code must retain the above copyright
   *     notice, this list of conditions and the following disclaimer.
   *   * Redistributions in binary form must reproduce the above copyright
   *     notice, this list of conditions and the following disclaimer in
   *     the documentation and/or other materials provided with the
   *     distribution.
   *   * Neither the name of Intel Corporation nor the names of its
   *     contributors may be used to endorse or promote products derived
   *     from this software without specific prior written permission.
   *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
   * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
   * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
   * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   */
  
  #include <linux/kernel.h>
  #include <linux/init.h>
  #include <linux/module.h>
  #include <linux/firmware.h>
  #include <linux/efi.h>
  #include <asm/string.h>
  #include <scsi/scsi_host.h>
  #include "host.h"
  #include "isci.h"
  #include "task.h"
  #include "probe_roms.h"
  
  #define MAJ 1
  #define MIN 1
  #define BUILD 0
  #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
  	__stringify(BUILD)
  
  MODULE_VERSION(DRV_VERSION);
  
  static struct scsi_transport_template *isci_transport_template;
  
  static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
  	{ PCI_VDEVICE(INTEL, 0x1D61),},
  	{ PCI_VDEVICE(INTEL, 0x1D63),},
  	{ PCI_VDEVICE(INTEL, 0x1D65),},
  	{ PCI_VDEVICE(INTEL, 0x1D67),},
  	{ PCI_VDEVICE(INTEL, 0x1D69),},
  	{ PCI_VDEVICE(INTEL, 0x1D6B),},
  	{ PCI_VDEVICE(INTEL, 0x1D60),},
  	{ PCI_VDEVICE(INTEL, 0x1D62),},
  	{ PCI_VDEVICE(INTEL, 0x1D64),},
  	{ PCI_VDEVICE(INTEL, 0x1D66),},
  	{ PCI_VDEVICE(INTEL, 0x1D68),},
  	{ PCI_VDEVICE(INTEL, 0x1D6A),},
  	{}
  };
  
  MODULE_DEVICE_TABLE(pci, isci_id_table);
  
  /* linux isci specific settings */
  
  unsigned char no_outbound_task_to = 2;
  module_param(no_outbound_task_to, byte, 0);
  MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
  
  u16 ssp_max_occ_to = 20;
  module_param(ssp_max_occ_to, ushort, 0);
  MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
  
  u16 stp_max_occ_to = 5;
  module_param(stp_max_occ_to, ushort, 0);
  MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
  
  u16 ssp_inactive_to = 5;
  module_param(ssp_inactive_to, ushort, 0);
  MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
  
  u16 stp_inactive_to = 5;
  module_param(stp_inactive_to, ushort, 0);
  MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
  
  unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
  module_param(phy_gen, byte, 0);
  MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
  
  unsigned char max_concurr_spinup;
  module_param(max_concurr_spinup, byte, 0);
  MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
  
  uint cable_selection_override = CABLE_OVERRIDE_DISABLED;
  module_param(cable_selection_override, uint, 0);
  
  MODULE_PARM_DESC(cable_selection_override,
  		 "This field indicates length of the SAS/SATA cable between "
  		 "host and device. If any bits > 15 are set (default) "
  		 "indicates \"use platform defaults\"");
  
  static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
  {
  	struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
  	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
  	struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
  
  	return snprintf(buf, PAGE_SIZE, "%d
  ", ihost->id);
  }
  
  static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
  
  struct device_attribute *isci_host_attrs[] = {
  	&dev_attr_isci_id,
  	NULL
  };
  
  static struct scsi_host_template isci_sht = {
  
  	.module				= THIS_MODULE,
  	.name				= DRV_NAME,
  	.proc_name			= DRV_NAME,
  	.queuecommand			= sas_queuecommand,
  	.target_alloc			= sas_target_alloc,
  	.slave_configure		= sas_slave_configure,
  	.scan_finished			= isci_host_scan_finished,
  	.scan_start			= isci_host_start,
  	.change_queue_depth		= sas_change_queue_depth,
  	.change_queue_type		= sas_change_queue_type,
  	.bios_param			= sas_bios_param,
  	.can_queue			= ISCI_CAN_QUEUE_VAL,
  	.cmd_per_lun			= 1,
  	.this_id			= -1,
  	.sg_tablesize			= SG_ALL,
  	.max_sectors			= SCSI_DEFAULT_MAX_SECTORS,
  	.use_clustering			= ENABLE_CLUSTERING,
  	.eh_abort_handler		= sas_eh_abort_handler,
  	.eh_device_reset_handler        = sas_eh_device_reset_handler,
  	.eh_bus_reset_handler           = sas_eh_bus_reset_handler,
  	.target_destroy			= sas_target_destroy,
  	.ioctl				= sas_ioctl,
  	.shost_attrs			= isci_host_attrs,
  };
  
  static struct sas_domain_function_template isci_transport_ops  = {
  
  	/* The class calls these to notify the LLDD of an event. */
  	.lldd_port_formed	= isci_port_formed,
  	.lldd_port_deformed	= isci_port_deformed,
  
  	/* The class calls these when a device is found or gone. */
  	.lldd_dev_found		= isci_remote_device_found,
  	.lldd_dev_gone		= isci_remote_device_gone,
  
  	.lldd_execute_task	= isci_task_execute_task,
  	/* Task Management Functions. Must be called from process context. */
  	.lldd_abort_task	= isci_task_abort_task,
  	.lldd_abort_task_set	= isci_task_abort_task_set,
  	.lldd_clear_aca		= isci_task_clear_aca,
  	.lldd_clear_task_set	= isci_task_clear_task_set,
  	.lldd_I_T_nexus_reset	= isci_task_I_T_nexus_reset,
  	.lldd_lu_reset		= isci_task_lu_reset,
  	.lldd_query_task	= isci_task_query_task,
  
  	/* ata recovery called from ata-eh */
  	.lldd_ata_check_ready	= isci_ata_check_ready,
  
  	/* Port and Adapter management */
  	.lldd_clear_nexus_port	= isci_task_clear_nexus_port,
  	.lldd_clear_nexus_ha	= isci_task_clear_nexus_ha,
  
  	/* Phy management */
  	.lldd_control_phy	= isci_phy_control,
  
  	/* GPIO support */
  	.lldd_write_gpio	= isci_gpio_write,
  };
  
  
  /******************************************************************************
  * P R O T E C T E D  M E T H O D S
  ******************************************************************************/
  
  
  
  /**
   * isci_register_sas_ha() - This method initializes various lldd
   *    specific members of the sas_ha struct and calls the libsas
   *    sas_register_ha() function.
   * @isci_host: This parameter specifies the lldd specific wrapper for the
   *    libsas sas_ha struct.
   *
   * This method returns an error code indicating success or failure. The user
   * should check for possible memory allocation error return otherwise, a zero
   * indicates success.
   */
  static int isci_register_sas_ha(struct isci_host *isci_host)
  {
  	int i;
  	struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
  	struct asd_sas_phy **sas_phys;
  	struct asd_sas_port **sas_ports;
  
  	sas_phys = devm_kzalloc(&isci_host->pdev->dev,
  				SCI_MAX_PHYS * sizeof(void *),
  				GFP_KERNEL);
  	if (!sas_phys)
  		return -ENOMEM;
  
  	sas_ports = devm_kzalloc(&isci_host->pdev->dev,
  				 SCI_MAX_PORTS * sizeof(void *),
  				 GFP_KERNEL);
  	if (!sas_ports)
  		return -ENOMEM;
  
  	sas_ha->sas_ha_name = DRV_NAME;
  	sas_ha->lldd_module = THIS_MODULE;
  	sas_ha->sas_addr    = &isci_host->phys[0].sas_addr[0];
  
  	for (i = 0; i < SCI_MAX_PHYS; i++) {
  		sas_phys[i] = &isci_host->phys[i].sas_phy;
  		sas_ports[i] = &isci_host->sas_ports[i];
  	}
  
  	sas_ha->sas_phy  = sas_phys;
  	sas_ha->sas_port = sas_ports;
  	sas_ha->num_phys = SCI_MAX_PHYS;
  
  	sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL;
  	sas_ha->lldd_max_execute_num = 1;
  	sas_ha->strict_wide_ports = 1;
  
  	sas_register_ha(sas_ha);
  
  	return 0;
  }
  
  static void isci_unregister(struct isci_host *isci_host)
  {
  	struct Scsi_Host *shost;
  
  	if (!isci_host)
  		return;
  
  	sas_unregister_ha(&isci_host->sas_ha);
  
  	shost = to_shost(isci_host);
  	sas_remove_host(shost);
  	scsi_remove_host(shost);
  	scsi_host_put(shost);
  }
  
  static int isci_pci_init(struct pci_dev *pdev)
  {
  	int err, bar_num, bar_mask = 0;
  	void __iomem * const *iomap;
  
  	err = pcim_enable_device(pdev);
  	if (err) {
  		dev_err(&pdev->dev,
  			"failed enable PCI device %s!
  ",
  			pci_name(pdev));
  		return err;
  	}
  
  	for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
  		bar_mask |= 1 << (bar_num * 2);
  
  	err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
  	if (err)
  		return err;
  
  	iomap = pcim_iomap_table(pdev);
  	if (!iomap)
  		return -ENOMEM;
  
  	pci_set_master(pdev);
  
  	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
  	if (err) {
  		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
  		if (err)
  			return err;
  	}
  
  	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
  	if (err) {
  		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
  		if (err)
  			return err;
  	}
  
  	return 0;
  }
  
  static int num_controllers(struct pci_dev *pdev)
  {
  	/* bar size alone can tell us if we are running with a dual controller
  	 * part, no need to trust revision ids that might be under broken firmware
  	 * control
  	 */
  	resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
  	resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);
  
  	if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
  	    smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
  		return SCI_MAX_CONTROLLERS;
  	else
  		return 1;
  }
  
  static int isci_setup_interrupts(struct pci_dev *pdev)
  {
  	int err, i, num_msix;
  	struct isci_host *ihost;
  	struct isci_pci_info *pci_info = to_pci_info(pdev);
  
  	/*
  	 *  Determine the number of vectors associated with this
  	 *  PCI function.
  	 */
  	num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;
  
  	for (i = 0; i < num_msix; i++)
  		pci_info->msix_entries[i].entry = i;
  
  	err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix);
  	if (err)
  		goto intx;
  
  	for (i = 0; i < num_msix; i++) {
  		int id = i / SCI_NUM_MSI_X_INT;
  		struct msix_entry *msix = &pci_info->msix_entries[i];
  		irq_handler_t isr;
  
  		ihost = pci_info->hosts[id];
  		/* odd numbered vectors are error interrupts */
  		if (i & 1)
  			isr = isci_error_isr;
  		else
  			isr = isci_msix_isr;
  
  		err = devm_request_irq(&pdev->dev, msix->vector, isr, 0,
  				       DRV_NAME"-msix", ihost);
  		if (!err)
  			continue;
  
  		dev_info(&pdev->dev, "msix setup failed falling back to intx
  ");
  		while (i--) {
  			id = i / SCI_NUM_MSI_X_INT;
  			ihost = pci_info->hosts[id];
  			msix = &pci_info->msix_entries[i];
  			devm_free_irq(&pdev->dev, msix->vector, ihost);
  		}
  		pci_disable_msix(pdev);
  		goto intx;
  	}
  	return 0;
  
   intx:
  	for_each_isci_host(i, ihost, pdev) {
  		err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr,
  				       IRQF_SHARED, DRV_NAME"-intx", ihost);
  		if (err)
  			break;
  	}
  	return err;
  }
  
  static void isci_user_parameters_get(struct sci_user_parameters *u)
  {
  	int i;
  
  	for (i = 0; i < SCI_MAX_PHYS; i++) {
  		struct sci_phy_user_params *u_phy = &u->phys[i];
  
  		u_phy->max_speed_generation = phy_gen;
  
  		/* we are not exporting these for now */
  		u_phy->align_insertion_frequency = 0x7f;
  		u_phy->in_connection_align_insertion_frequency = 0xff;
  		u_phy->notify_enable_spin_up_insertion_frequency = 0x33;
  	}
  
  	u->stp_inactivity_timeout = stp_inactive_to;
  	u->ssp_inactivity_timeout = ssp_inactive_to;
  	u->stp_max_occupancy_timeout = stp_max_occ_to;
  	u->ssp_max_occupancy_timeout = ssp_max_occ_to;
  	u->no_outbound_task_timeout = no_outbound_task_to;
  	u->max_concurr_spinup = max_concurr_spinup;
  }
  
  static enum sci_status sci_user_parameters_set(struct isci_host *ihost,
  					       struct sci_user_parameters *sci_parms)
  {
  	u16 index;
  
  	/*
  	 * Validate the user parameters.  If they are not legal, then
  	 * return a failure.
  	 */
  	for (index = 0; index < SCI_MAX_PHYS; index++) {
  		struct sci_phy_user_params *u;
  
  		u = &sci_parms->phys[index];
  
  		if (!((u->max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED) &&
  		      (u->max_speed_generation > SCIC_SDS_PARM_NO_SPEED)))
  			return SCI_FAILURE_INVALID_PARAMETER_VALUE;
  
  		if (u->in_connection_align_insertion_frequency < 3)
  			return SCI_FAILURE_INVALID_PARAMETER_VALUE;
  
  		if ((u->in_connection_align_insertion_frequency < 3) ||
  		    (u->align_insertion_frequency == 0) ||
  		    (u->notify_enable_spin_up_insertion_frequency == 0))
  			return SCI_FAILURE_INVALID_PARAMETER_VALUE;
  	}
  
  	if ((sci_parms->stp_inactivity_timeout == 0) ||
  	    (sci_parms->ssp_inactivity_timeout == 0) ||
  	    (sci_parms->stp_max_occupancy_timeout == 0) ||
  	    (sci_parms->ssp_max_occupancy_timeout == 0) ||
  	    (sci_parms->no_outbound_task_timeout == 0))
  		return SCI_FAILURE_INVALID_PARAMETER_VALUE;
  
  	memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms));
  
  	return SCI_SUCCESS;
  }
  
  static void sci_oem_defaults(struct isci_host *ihost)
  {
  	/* these defaults are overridden by the platform / firmware */
  	struct sci_user_parameters *user = &ihost->user_parameters;
  	struct sci_oem_params *oem = &ihost->oem_parameters;
  	int i;
  
  	/* Default to APC mode. */
  	oem->controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
  
  	/* Default to APC mode. */
  	oem->controller.max_concurr_spin_up = 1;
  
  	/* Default to no SSC operation. */
  	oem->controller.do_enable_ssc = false;
  
  	/* Default to short cables on all phys. */
  	oem->controller.cable_selection_mask = 0;
  
  	/* Initialize all of the port parameter information to narrow ports. */
  	for (i = 0; i < SCI_MAX_PORTS; i++)
  		oem->ports[i].phy_mask = 0;
  
  	/* Initialize all of the phy parameter information. */
  	for (i = 0; i < SCI_MAX_PHYS; i++) {
  		/* Default to 3G (i.e. Gen 2). */
  		user->phys[i].max_speed_generation = SCIC_SDS_PARM_GEN2_SPEED;
  
  		/* the frequencies cannot be 0 */
  		user->phys[i].align_insertion_frequency = 0x7f;
  		user->phys[i].in_connection_align_insertion_frequency = 0xff;
  		user->phys[i].notify_enable_spin_up_insertion_frequency = 0x33;
  
  		/* Previous Vitesse based expanders had a arbitration issue that
  		 * is worked around by having the upper 32-bits of SAS address
  		 * with a value greater then the Vitesse company identifier.
  		 * Hence, usage of 0x5FCFFFFF.
  		 */
  		oem->phys[i].sas_address.low = 0x1 + ihost->id;
  		oem->phys[i].sas_address.high = 0x5FCFFFFF;
  	}
  
  	user->stp_inactivity_timeout = 5;
  	user->ssp_inactivity_timeout = 5;
  	user->stp_max_occupancy_timeout = 5;
  	user->ssp_max_occupancy_timeout = 20;
  	user->no_outbound_task_timeout = 2;
  }
  
  static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
  {
  	struct isci_orom *orom = to_pci_info(pdev)->orom;
  	struct sci_user_parameters sci_user_params;
  	u8 oem_version = ISCI_ROM_VER_1_0;
  	struct isci_host *ihost;
  	struct Scsi_Host *shost;
  	int err, i;
  
  	ihost = devm_kzalloc(&pdev->dev, sizeof(*ihost), GFP_KERNEL);
  	if (!ihost)
  		return NULL;
  
  	ihost->pdev = pdev;
  	ihost->id = id;
  	spin_lock_init(&ihost->scic_lock);
  	init_waitqueue_head(&ihost->eventq);
  	ihost->sas_ha.dev = &ihost->pdev->dev;
  	ihost->sas_ha.lldd_ha = ihost;
  	tasklet_init(&ihost->completion_tasklet,
  		     isci_host_completion_routine, (unsigned long)ihost);
  
  	/* validate module parameters */
  	/* TODO: kill struct sci_user_parameters and reference directly */
  	sci_oem_defaults(ihost);
  	isci_user_parameters_get(&sci_user_params);
  	if (sci_user_parameters_set(ihost, &sci_user_params)) {
  		dev_warn(&pdev->dev,
  			 "%s: sci_user_parameters_set failed
  ", __func__);
  		return NULL;
  	}
  
  	/* sanity check platform (or 'firmware') oem parameters */
  	if (orom) {
  		if (id < 0 || id >= SCI_MAX_CONTROLLERS || id > orom->hdr.num_elements) {
  			dev_warn(&pdev->dev, "parsing firmware oem parameters failed
  ");
  			return NULL;
  		}
  		ihost->oem_parameters = orom->ctrl[id];
  		oem_version = orom->hdr.version;
  	}
  
  	/* validate oem parameters (platform, firmware, or built-in defaults) */
  	if (sci_oem_parameters_validate(&ihost->oem_parameters, oem_version)) {
  		dev_warn(&pdev->dev, "oem parameter validation failed
  ");
  		return NULL;
  	}
  
  	for (i = 0; i < SCI_MAX_PORTS; i++) {
  		struct isci_port *iport = &ihost->ports[i];
  
  		INIT_LIST_HEAD(&iport->remote_dev_list);
  		iport->isci_host = ihost;
  	}
  
  	for (i = 0; i < SCI_MAX_PHYS; i++)
  		isci_phy_init(&ihost->phys[i], ihost, i);
  
  	for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
  		struct isci_remote_device *idev = &ihost->devices[i];
  
  		INIT_LIST_HEAD(&idev->node);
  	}
  
  	shost = scsi_host_alloc(&isci_sht, sizeof(void *));
  	if (!shost)
  		return NULL;
  
  	dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: "
  		 "{%s, %s, %s, %s}
  ",
  		 (is_cable_select_overridden() ? "* " : ""), ihost->id,
  		 lookup_cable_names(decode_cable_selection(ihost, 3)),
  		 lookup_cable_names(decode_cable_selection(ihost, 2)),
  		 lookup_cable_names(decode_cable_selection(ihost, 1)),
  		 lookup_cable_names(decode_cable_selection(ihost, 0)));
  
  	err = isci_host_init(ihost);
  	if (err)
  		goto err_shost;
  
  	SHOST_TO_SAS_HA(shost) = &ihost->sas_ha;
  	ihost->sas_ha.core.shost = shost;
  	shost->transportt = isci_transport_template;
  
  	shost->max_id = ~0;
  	shost->max_lun = ~0;
  	shost->max_cmd_len = MAX_COMMAND_SIZE;
  
  	err = scsi_add_host(shost, &pdev->dev);
  	if (err)
  		goto err_shost;
  
  	err = isci_register_sas_ha(ihost);
  	if (err)
  		goto err_shost_remove;
  
  	return ihost;
  
   err_shost_remove:
  	scsi_remove_host(shost);
   err_shost:
  	scsi_host_put(shost);
  
  	return NULL;
  }
  
  static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
  {
  	struct isci_pci_info *pci_info;
  	int err, i;
  	struct isci_host *isci_host;
  	const struct firmware *fw = NULL;
  	struct isci_orom *orom = NULL;
  	char *source = "(platform)";
  
  	dev_info(&pdev->dev, "driver configured for rev: %d silicon
  ",
  		 pdev->revision);
  
  	pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
  	if (!pci_info)
  		return -ENOMEM;
  	pci_set_drvdata(pdev, pci_info);
  
  	if (efi_enabled(EFI_RUNTIME_SERVICES))
  		orom = isci_get_efi_var(pdev);
  
  	if (!orom)
  		orom = isci_request_oprom(pdev);
  
  	for (i = 0; orom && i < num_controllers(pdev); i++) {
  		if (sci_oem_parameters_validate(&orom->ctrl[i],
  						orom->hdr.version)) {
  			dev_warn(&pdev->dev,
  				 "[%d]: invalid oem parameters detected, falling back to firmware
  ", i);
  			orom = NULL;
  			break;
  		}
  	}
  
  	if (!orom) {
  		source = "(firmware)";
  		orom = isci_request_firmware(pdev, fw);
  		if (!orom) {
  			/* TODO convert this to WARN_TAINT_ONCE once the
  			 * orom/efi parameter support is widely available
  			 */
  			dev_warn(&pdev->dev,
  				 "Loading user firmware failed, using default "
  				 "values
  ");
  			dev_warn(&pdev->dev,
  				 "Default OEM configuration being used: 4 "
  				 "narrow ports, and default SAS Addresses
  ");
  		}
  	}
  
  	if (orom)
  		dev_info(&pdev->dev,
  			 "OEM SAS parameters (version: %u.%u) loaded %s
  ",
  			 (orom->hdr.version & 0xf0) >> 4,
  			 (orom->hdr.version & 0xf), source);
  
  	pci_info->orom = orom;
  
  	err = isci_pci_init(pdev);
  	if (err)
  		return err;
  
  	for (i = 0; i < num_controllers(pdev); i++) {
  		struct isci_host *h = isci_host_alloc(pdev, i);
  
  		if (!h) {
  			err = -ENOMEM;
  			goto err_host_alloc;
  		}
  		pci_info->hosts[i] = h;
  
  		/* turn on DIF support */
  		scsi_host_set_prot(to_shost(h),
  				   SHOST_DIF_TYPE1_PROTECTION |
  				   SHOST_DIF_TYPE2_PROTECTION |
  				   SHOST_DIF_TYPE3_PROTECTION);
  		scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
  	}
  
  	err = isci_setup_interrupts(pdev);
  	if (err)
  		goto err_host_alloc;
  
  	for_each_isci_host(i, isci_host, pdev)
  		scsi_scan_host(to_shost(isci_host));
  
  	return 0;
  
   err_host_alloc:
  	for_each_isci_host(i, isci_host, pdev)
  		isci_unregister(isci_host);
  	return err;
  }
  
  static void isci_pci_remove(struct pci_dev *pdev)
  {
  	struct isci_host *ihost;
  	int i;
  
  	for_each_isci_host(i, ihost, pdev) {
  		wait_for_start(ihost);
  		isci_unregister(ihost);
  		isci_host_deinit(ihost);
  	}
  }
  
  #ifdef CONFIG_PM_SLEEP
  static int isci_suspend(struct device *dev)
  {
  	struct pci_dev *pdev = to_pci_dev(dev);
  	struct isci_host *ihost;
  	int i;
  
  	for_each_isci_host(i, ihost, pdev) {
  		sas_suspend_ha(&ihost->sas_ha);
  		isci_host_deinit(ihost);
  	}
  
  	pci_save_state(pdev);
  	pci_disable_device(pdev);
  	pci_set_power_state(pdev, PCI_D3hot);
  
  	return 0;
  }
  
  static int isci_resume(struct device *dev)
  {
  	struct pci_dev *pdev = to_pci_dev(dev);
  	struct isci_host *ihost;
  	int rc, i;
  
  	pci_set_power_state(pdev, PCI_D0);
  	pci_restore_state(pdev);
  
  	rc = pcim_enable_device(pdev);
  	if (rc) {
  		dev_err(&pdev->dev,
  			"enabling device failure after resume(%d)
  ", rc);
  		return rc;
  	}
  
  	pci_set_master(pdev);
  
  	for_each_isci_host(i, ihost, pdev) {
  		sas_prep_resume_ha(&ihost->sas_ha);
  
  		isci_host_init(ihost);
  		isci_host_start(ihost->sas_ha.core.shost);
  		wait_for_start(ihost);
  
  		sas_resume_ha(&ihost->sas_ha);
  	}
  
  	return 0;
  }
  #endif
  
  static SIMPLE_DEV_PM_OPS(isci_pm_ops, isci_suspend, isci_resume);
  
  static struct pci_driver isci_pci_driver = {
  	.name		= DRV_NAME,
  	.id_table	= isci_id_table,
  	.probe		= isci_pci_probe,
  	.remove		= isci_pci_remove,
  	.driver.pm      = &isci_pm_ops,
  };
  
  static __init int isci_init(void)
  {
  	int err;
  
  	pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s
  ",
  		DRV_NAME, DRV_VERSION);
  
  	isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
  	if (!isci_transport_template)
  		return -ENOMEM;
  
  	err = pci_register_driver(&isci_pci_driver);
  	if (err)
  		sas_release_transport(isci_transport_template);
  
  	return err;
  }
  
  static __exit void isci_exit(void)
  {
  	pci_unregister_driver(&isci_pci_driver);
  	sas_release_transport(isci_transport_template);
  }
  
  MODULE_LICENSE("Dual BSD/GPL");
  MODULE_FIRMWARE(ISCI_FW_NAME);
  module_init(isci_init);
  module_exit(isci_exit);