#
  # Hardware monitoring chip drivers configuration
  #
  
  menuconfig HWMON
  	tristate "Hardware Monitoring support"
  	depends on HAS_IOMEM
  	default y
  	help
  	  Hardware monitoring devices let you monitor the hardware health
  	  of a system. Most modern motherboards include such a device. It
  	  can include temperature sensors, voltage sensors, fan speed
  	  sensors and various additional features such as the ability to
  	  control the speed of the fans.  If you want this support you
  	  should say Y here and also to the specific driver(s) for your
  	  sensors chip(s) below.
  
  	  To find out which specific driver(s) you need, use the
  	  sensors-detect script from the lm_sensors package.  Read
  	  <file:Documentation/hwmon/userspace-tools> for details.
  
  	  This support can also be built as a module.  If so, the module
  	  will be called hwmon.
  
  if HWMON
  
  config HWMON_VID
  	tristate
  	default n
  
  config HWMON_DEBUG_CHIP
  	bool "Hardware Monitoring Chip debugging messages"
  	default n
  	help
  	  Say Y here if you want the I2C chip drivers to produce a bunch of
  	  debug messages to the system log.  Select this if you are having
  	  a problem with I2C support and want to see more of what is going
  	  on.
  
  comment "Native drivers"
  
  config SENSORS_AB8500
  	tristate "AB8500 thermal monitoring"
  	depends on AB8500_GPADC && AB8500_BM
  	default n
  	help
  	  If you say yes here you get support for the thermal sensor part
  	  of the AB8500 chip. The driver includes thermal management for
  	  AB8500 die and two GPADC channels. The GPADC channel are preferably
  	  used to access sensors outside the AB8500 chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called abx500-temp.
  
  config SENSORS_ABITUGURU
  	tristate "Abit uGuru (rev 1 & 2)"
  	depends on X86 && DMI
  	help
  	  If you say yes here you get support for the sensor part of the first
  	  and second revision of the Abit uGuru chip. The voltage and frequency
  	  control parts of the Abit uGuru are not supported. The Abit uGuru
  	  chip can be found on Abit uGuru featuring motherboards (most modern
  	  Abit motherboards from before end 2005). For more info and a list
  	  of which motherboards have which revision see
  	  Documentation/hwmon/abituguru
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called abituguru.
  
  config SENSORS_ABITUGURU3
  	tristate "Abit uGuru (rev 3)"
  	depends on X86 && DMI
  	help
  	  If you say yes here you get support for the sensor part of the
  	  third revision of the Abit uGuru chip. Only reading the sensors
  	  and their settings is supported. The third revision of the Abit
  	  uGuru chip can be found on recent Abit motherboards (since end
  	  2005). For more info and a list of which motherboards have which
  	  revision see Documentation/hwmon/abituguru3
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called abituguru3.
  
  config SENSORS_AD7314
  	tristate "Analog Devices AD7314 and compatibles"
  	depends on SPI
  	help
  	  If you say yes here you get support for the Analog Devices
  	  AD7314, ADT7301 and ADT7302 temperature sensors.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called ad7314.
  
  config SENSORS_AD7414
  	tristate "Analog Devices AD7414"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Analog Devices
  	  AD7414 temperature monitoring chip.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called ad7414.
  
  config SENSORS_AD7418
  	tristate "Analog Devices AD7416, AD7417 and AD7418"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Analog Devices
  	  AD7416, AD7417 and AD7418 temperature monitoring chips.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called ad7418.
  
  config SENSORS_ADCXX
  	tristate "National Semiconductor ADCxxxSxxx"
  	depends on SPI_MASTER
  	help
  	  If you say yes here you get support for the National Semiconductor
  	  ADC<bb><c>S<sss> chip family, where
  	  * bb  is the resolution in number of bits (8, 10, 12)
  	  * c   is the number of channels (1, 2, 4, 8)
  	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
  	    kSPS and 101 for 1 MSPS)
  
  	  Examples : ADC081S101, ADC124S501, ...
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adcxx.
  
  config SENSORS_ADM1021
  	tristate "Analog Devices ADM1021 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for Analog Devices ADM1021
  	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  	  Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adm1021.
  
  config SENSORS_ADM1025
  	tristate "Analog Devices ADM1025 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for Analog Devices ADM1025
  	  and Philips NE1619 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adm1025.
  
  config SENSORS_ADM1026
  	tristate "Analog Devices ADM1026 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for Analog Devices ADM1026
  	  sensor chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adm1026.
  
  config SENSORS_ADM1029
  	tristate "Analog Devices ADM1029"
  	depends on I2C
  	help
  	  If you say yes here you get support for Analog Devices ADM1029
  	  sensor chip.
  	  Very rare chip, please let us know you use it.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adm1029.
  
  config SENSORS_ADM1031
  	tristate "Analog Devices ADM1031 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for Analog Devices ADM1031
  	  and ADM1030 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adm1031.
  
  config SENSORS_ADM9240
  	tristate "Analog Devices ADM9240 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for Analog Devices ADM9240,
  	  Dallas DS1780, National Semiconductor LM81 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called adm9240.
  
  config SENSORS_ADT7X10
  	tristate
  	help
  	  This module contains common code shared by the ADT7310/ADT7320 and
  	  ADT7410/ADT7420 temperature monitoring chip drivers.
  
  	  If build as a module, the module will be called adt7x10.
  
  config SENSORS_ADT7310
  	tristate "Analog Devices ADT7310/ADT7320"
  	depends on SPI_MASTER
  	select SENSORS_ADT7X10
  	help
  	  If you say yes here you get support for the Analog Devices
  	  ADT7310 and ADT7320 temperature monitoring chips.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called adt7310.
  
  config SENSORS_ADT7410
  	tristate "Analog Devices ADT7410/ADT7420"
  	depends on I2C
  	select SENSORS_ADT7X10
  	help
  	  If you say yes here you get support for the Analog Devices
  	  ADT7410 and ADT7420 temperature monitoring chips.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called adt7410.
  
  config SENSORS_ADT7411
  	tristate "Analog Devices ADT7411"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Analog Devices
  	  ADT7411 voltage and temperature monitoring chip.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called adt7411.
  
  config SENSORS_ADT7462
  	tristate "Analog Devices ADT7462"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Analog Devices
  	  ADT7462 temperature monitoring chips.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called adt7462.
  
  config SENSORS_ADT7470
  	tristate "Analog Devices ADT7470"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Analog Devices
  	  ADT7470 temperature monitoring chips.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called adt7470.
  
  config SENSORS_ADT7475
  	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the Analog Devices
  	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
  	  chips.
  
  	  This driver can also be build as a module.  If so, the module
  	  will be called adt7475.
  
  config SENSORS_ASC7621
  	tristate "Andigilog aSC7621"
  	depends on I2C
  	help
  	  If you say yes here you get support for the aSC7621
  	  family of SMBus sensors chip found on most Intel X38, X48, X58,
  	  945, 965 and 975 desktop boards.  Currently supported chips:
  	  aSC7621
  	  aSC7621a
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called asc7621.
  
  config SENSORS_K8TEMP
  	tristate "AMD Athlon64/FX or Opteron temperature sensor"
  	depends on X86 && PCI
  	help
  	  If you say yes here you get support for the temperature
  	  sensor(s) inside your CPU. Supported is whole AMD K8
  	  microarchitecture. Please note that you will need at least
  	  lm-sensors 2.10.1 for proper userspace support.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called k8temp.
  
  config SENSORS_K10TEMP
  	tristate "AMD Family 10h+ temperature sensor"
  	depends on X86 && PCI
  	help
  	  If you say yes here you get support for the temperature
  	  sensor(s) inside your CPU. Supported are later revisions of
  	  the AMD Family 10h and all revisions of the AMD Family 11h,
  	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
  	  16h (Kabini) microarchitectures.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called k10temp.
  
  config SENSORS_FAM15H_POWER
  	tristate "AMD Family 15h processor power"
  	depends on X86 && PCI
  	help
  	  If you say yes here you get support for processor power
  	  information of your AMD family 15h CPU.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called fam15h_power.
  
  config SENSORS_ASB100
  	tristate "Asus ASB100 Bach"
  	depends on X86 && I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the ASB100 Bach sensor
  	  chip found on some Asus mainboards.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called asb100.
  
  config SENSORS_ATXP1
  	tristate "Attansic ATXP1 VID controller"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the Attansic ATXP1 VID
  	  controller.
  
  	  If your board have such a chip, you are able to control your CPU
  	  core and other voltages.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called atxp1.
  
  config SENSORS_DS620
  	tristate "Dallas Semiconductor DS620"
  	depends on I2C
  	help
  	  If you say yes here you get support for Dallas Semiconductor
  	  DS620 sensor chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ds620.
  
  config SENSORS_DS1621
  	tristate "Dallas Semiconductor DS1621 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for Dallas Semiconductor/Maxim
  	  Integrated DS1621 sensor chips and compatible models including:
  
  	  - Dallas Semiconductor DS1625
  	  - Maxim Integrated DS1631
  	  - Maxim Integrated DS1721
  	  - Maxim Integrated DS1731
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ds1621.
  
  config SENSORS_DA9052_ADC
  	tristate "Dialog DA9052/DA9053 ADC"
  	depends on PMIC_DA9052
  	help
  	  Say y here to support the ADC found on Dialog Semiconductor
  	  DA9052-BC and DA9053-AA/Bx PMICs.
  
  	  This driver can also be built as module. If so, the module
  	  will be called da9052-hwmon.
  
  config SENSORS_DA9055
  	tristate "Dialog Semiconductor DA9055 ADC"
  	depends on MFD_DA9055
  	help
  	  If you say yes here you get support for ADC on the Dialog
  	  Semiconductor DA9055 PMIC.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called da9055-hwmon.
  
  config SENSORS_I5K_AMB
  	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
  	depends on PCI
  	help
  	  If you say yes here you get support for FB-DIMM AMB temperature
  	  monitoring chips on systems with the Intel 5000 series chipset.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called i5k_amb.
  
  config SENSORS_F71805F
  	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
  	depends on !PPC
  	help
  	  If you say yes here you get support for hardware monitoring
  	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
  	  Super-I/O chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called f71805f.
  
  config SENSORS_F71882FG
  	tristate "Fintek F71882FG and compatibles"
  	depends on !PPC
  	help
  	  If you say yes here you get support for hardware monitoring
  	  features of many Fintek Super-I/O (LPC) chips. The currently
  	  supported chips are:
  	    F71808E/A
  	    F71858FG
  	    F71862FG
  	    F71863FG
  	    F71869F/E/A
  	    F71882FG
  	    F71883FG
  	    F71889FG/ED/A
  	    F8000
  	    F81801U
  	    F81865F
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called f71882fg.
  
  config SENSORS_F75375S
  	tristate "Fintek F75375S/SP, F75373 and F75387"
  	depends on I2C
  	help
  	  If you say yes here you get support for hardware monitoring
  	  features of the Fintek F75375S/SP, F75373 and F75387
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called f75375s.
  
  config SENSORS_FSCHMD
  	tristate "Fujitsu Siemens Computers sensor chips"
  	depends on X86 && I2C
  	help
  	  If you say yes here you get support for the following Fujitsu
  	  Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
  	  Heimdall, Heracles, Hades and Syleus including support for the
  	  integrated watchdog.
  
  	  This is a merged driver for FSC sensor chips replacing the fscpos,
  	  fscscy and fscher drivers and adding support for several other FSC
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called fschmd.
  
  config SENSORS_G760A
  	tristate "GMT G760A"
  	depends on I2C
  	help
  	  If you say yes here you get support for Global Mixed-mode
  	  Technology Inc G760A fan speed PWM controller chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called g760a.
  
  config SENSORS_G762
  	tristate "GMT G762 and G763"
  	depends on I2C
  	help
  	  If you say yes here you get support for Global Mixed-mode
  	  Technology Inc G762 and G763 fan speed PWM controller chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called g762.
  
  config SENSORS_GL518SM
  	tristate "Genesys Logic GL518SM"
  	depends on I2C
  	help
  	  If you say yes here you get support for Genesys Logic GL518SM
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called gl518sm.
  
  config SENSORS_GL520SM
  	tristate "Genesys Logic GL520SM"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for Genesys Logic GL520SM
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called gl520sm.
  
  config SENSORS_GPIO_FAN
  	tristate "GPIO fan"
  	depends on GPIOLIB
  	help
  	  If you say yes here you get support for fans connected to GPIO lines.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called gpio-fan.
  
  config SENSORS_HIH6130
  	tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
  	depends on I2C
  	help
  	  If you say yes here you get support for Honeywell Humidicon
  	  HIH-6130 and HIH-6131 Humidicon humidity sensors.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called hih6130.
  
  config SENSORS_HTU21
  	tristate "Measurement Specialties HTU21D humidity/temperature sensors"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Measurement Specialties
  	  HTU21D humidity and temperature sensors.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called htu21.
  
  config SENSORS_CORETEMP
  	tristate "Intel Core/Core2/Atom temperature sensor"
  	depends on X86
  	help
  	  If you say yes here you get support for the temperature
  	  sensor inside your CPU. Most of the family 6 CPUs
  	  are supported. Check Documentation/hwmon/coretemp for details.
  
  config SENSORS_IBMAEM
  	tristate "IBM Active Energy Manager temperature/power sensors and control"
  	select IPMI_SI
  	depends on IPMI_HANDLER
  	help
  	  If you say yes here you get support for the temperature and
  	  power sensors and capping hardware in various IBM System X
  	  servers that support Active Energy Manager.  This includes
  	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
  	  and certain HC10/HS2x/LS2x/QS2x blades.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ibmaem.
  
  config SENSORS_IBMPEX
  	tristate "IBM PowerExecutive temperature/power sensors"
  	select IPMI_SI
  	depends on IPMI_HANDLER
  	help
  	  If you say yes here you get support for the temperature and
  	  power sensors in various IBM System X servers that support
  	  PowerExecutive.  So far this includes the x3350, x3550, x3650,
  	  x3655, and x3755; the x3800, x3850, and x3950 models that have
  	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ibmpex.
  
  config SENSORS_IIO_HWMON
  	tristate "Hwmon driver that uses channels specified via iio maps"
  	depends on IIO
  	help
  	  This is a platform driver that in combination with a suitable
  	  map allows IIO devices to provide basic hwmon functionality
  	  for those channels specified in the map.  This map can be provided
  	  either via platform data or the device tree bindings.
  
  config SENSORS_IT87
  	tristate "ITE IT87xx and compatibles"
  	depends on !PPC
  	select HWMON_VID
  	help
  	  If you say yes here you get support for ITE IT8705F, IT8712F,
  	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
  	  IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips,
  	  and the SiS950 clone.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called it87.
  
  config SENSORS_JZ4740
  	tristate "Ingenic JZ4740 SoC ADC driver"
  	depends on MACH_JZ4740 && MFD_JZ4740_ADC
  	help
  	  If you say yes here you get support for reading adc values from the ADCIN
  	  pin on Ingenic JZ4740 SoC based boards.
  
  	  This driver can also be build as a module. If so, the module will be
  	  called jz4740-hwmon.
  
  config SENSORS_JC42
  	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
  	depends on I2C
  	help
  	  If you say yes here, you get support for JEDEC JC42.4 compliant
  	  temperature sensors, which are used on many DDR3 memory modules for
  	  mobile devices and servers.  Support will include, but not be limited
  	  to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
  	  MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
  	  STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called jc42.
  
  config SENSORS_LINEAGE
  	tristate "Lineage Compact Power Line Power Entry Module"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Lineage Compact Power Line
  	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
  	  CP2000DC, CP2725, and others.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lineage-pem.
  
  config SENSORS_LM63
  	tristate "National Semiconductor LM63 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for the National
  	  Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
  	  sensors with integrated fan control.  Such chips are found
  	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
  	  others.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm63.
  
  config SENSORS_LM70
  	tristate "National Semiconductor LM70 and compatibles"
  	depends on SPI_MASTER
  	help
  	  If you say yes here you get support for the National Semiconductor
  	  LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
  	  ture sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm70.
  
  config SENSORS_LM73
  	tristate "National Semiconductor LM73"
  	depends on I2C
  	help
  	  If you say yes here you get support for National Semiconductor LM73
  	  sensor chips.
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm73.
  
  config SENSORS_LM75
  	tristate "National Semiconductor LM75 and compatibles"
  	depends on I2C
  	depends on THERMAL || !THERMAL_OF
  	help
  	  If you say yes here you get support for one common type of
  	  temperature sensor chip, with models including:
  
  		- Analog Devices ADT75
  		- Dallas Semiconductor DS75, DS1775 and DS7505
  		- Global Mixed-mode Technology (GMT) G751
  		- Maxim MAX6625 and MAX6626
  		- Microchip MCP980x
  		- National Semiconductor LM75, LM75A
  		- NXP's LM75A
  		- ST Microelectronics STDS75
  		- TelCom (now Microchip) TCN75
  		- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
  		  TMP275
  
  	  This driver supports driver model based binding through board
  	  specific I2C device tables.
  
  	  It also supports the "legacy" style of driver binding.  To use
  	  that with some chips which don't replicate LM75 quirks exactly,
  	  you may need the "force" module parameter.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm75.
  
  config SENSORS_LM77
  	tristate "National Semiconductor LM77"
  	depends on I2C
  	help
  	  If you say yes here you get support for National Semiconductor LM77
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm77.
  
  config SENSORS_LM78
  	tristate "National Semiconductor LM78 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for National Semiconductor LM78,
  	  LM78-J and LM79.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm78.
  
  config SENSORS_LM80
  	tristate "National Semiconductor LM80 and LM96080"
  	depends on I2C
  	help
  	  If you say yes here you get support for National Semiconductor
  	  LM80 and LM96080 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm80.
  
  config SENSORS_LM83
  	tristate "National Semiconductor LM83 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for National Semiconductor
  	  LM82 and LM83 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm83.
  
  config SENSORS_LM85
  	tristate "National Semiconductor LM85 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for National Semiconductor LM85
  	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
  	  EMC6D101, EMC6D102, and EMC6D103.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm85.
  
  config SENSORS_LM87
  	tristate "National Semiconductor LM87 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for National Semiconductor LM87
  	  and Analog Devices ADM1024 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm87.
  
  config SENSORS_LM90
  	tristate "National Semiconductor LM90 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for National Semiconductor LM90,
  	  LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
  	  Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
  	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
  	  Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm90.
  
  config SENSORS_LM92
  	tristate "National Semiconductor LM92 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for National Semiconductor LM92
  	  and Maxim MAX6635 sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm92.
  
  config SENSORS_LM93
  	tristate "National Semiconductor LM93 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for National Semiconductor LM93,
  	  LM94, and compatible sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm93.
  
  config SENSORS_LTC4151
  	tristate "Linear Technology LTC4151"
  	depends on I2C
  	default n
  	help
  	  If you say yes here you get support for Linear Technology LTC4151
  	  High Voltage I2C Current and Voltage Monitor interface.
  
  	  This driver can also be built as a module. If so, the module will
  	  be called ltc4151.
  
  config SENSORS_LTC4215
  	tristate "Linear Technology LTC4215"
  	depends on I2C
  	default n
  	help
  	  If you say yes here you get support for Linear Technology LTC4215
  	  Hot Swap Controller I2C interface.
  
  	  This driver can also be built as a module. If so, the module will
  	  be called ltc4215.
  
  config SENSORS_LTC4245
  	tristate "Linear Technology LTC4245"
  	depends on I2C
  	default n
  	help
  	  If you say yes here you get support for Linear Technology LTC4245
  	  Multiple Supply Hot Swap Controller I2C interface.
  
  	  This driver can also be built as a module. If so, the module will
  	  be called ltc4245.
  
  config SENSORS_LTC4261
  	tristate "Linear Technology LTC4261"
  	depends on I2C
  	default n
  	help
  	  If you say yes here you get support for Linear Technology LTC4261
  	  Negative Voltage Hot Swap Controller I2C interface.
  
  	  This driver can also be built as a module. If so, the module will
  	  be called ltc4261.
  
  config SENSORS_LM95234
  	tristate "National Semiconductor LM95234"
  	depends on I2C
  	help
  	  If you say yes here you get support for the LM95234 temperature
  	  sensor.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm95234.
  
  config SENSORS_LM95241
  	tristate "National Semiconductor LM95241 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for LM95231 and LM95241 sensor
  	  chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm95241.
  
  config SENSORS_LM95245
  	tristate "National Semiconductor LM95245 sensor chip"
  	depends on I2C
  	help
  	  If you say yes here you get support for LM95245 sensor chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called lm95245.
  
  config SENSORS_MAX1111
  	tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
  	depends on SPI_MASTER
  	help
  	  Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
  	  ADC chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max1111.
  
  config SENSORS_MAX16065
  	tristate "Maxim MAX16065 System Manager and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for hardware monitoring
  	  capabilities of the following Maxim System Manager chips.
  	    MAX16065
  	    MAX16066
  	    MAX16067
  	    MAX16068
  	    MAX16070
  	    MAX16071
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max16065.
  
  config SENSORS_MAX1619
  	tristate "Maxim MAX1619 sensor chip"
  	depends on I2C
  	help
  	  If you say yes here you get support for MAX1619 sensor chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max1619.
  
  config SENSORS_MAX1668
  	tristate "Maxim MAX1668 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for MAX1668, MAX1989 and
  	  MAX1805 chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max1668.
  
  config SENSORS_MAX17135
          tristate "Maxim MAX17135 EPD temperature sensor"
          depends on I2C
          help
            If you say yes here you get support for MAX17135 PMIC sensor.
  
            This driver can also be built as a module.  If so, the module
            will be called max17135_sensor.
  
  config SENSORS_MAX197
  	tristate "Maxim MAX197 and compatibles"
  	help
  	  Support for the Maxim MAX197 A/D converter.
  	  Support will include, but not be limited to, MAX197, and MAX199.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called max197.
  
  config SENSORS_MAX6639
  	tristate "Maxim MAX6639 sensor chip"
  	depends on I2C
  	help
  	  If you say yes here you get support for the MAX6639
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max6639.
  
  config SENSORS_MAX6642
  	tristate "Maxim MAX6642 sensor chip"
  	depends on I2C
  	help
  	  If you say yes here you get support for MAX6642 sensor chip.
  	  MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
  	  with Overtemperature Alarm from Maxim.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max6642.
  
  config SENSORS_MAX6650
  	tristate "Maxim MAX6650 sensor chip"
  	depends on I2C
  	help
  	  If you say yes here you get support for the MAX6650 / MAX6651
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max6650.
  
  config SENSORS_MAX6697
  	tristate "Maxim MAX6697 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for MAX6581, MAX6602, MAX6622,
  	  MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
  	  temperature sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called max6697.
  
  config SENSORS_MCP3021
  	tristate "Microchip MCP3021 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for MCP3021 and MCP3221.
  	  The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
  	  with 12-bit resolution.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called mcp3021.
  
  config SENSORS_NCT6775
  	tristate "Nuvoton NCT6775F and compatibles"
  	depends on !PPC
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the hardware monitoring
  	  functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
  	  and compatible Super-I/O chips. This driver replaces the
  	  w83627ehf driver for NCT6775F and NCT6776F.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called nct6775.
  
  config SENSORS_NTC_THERMISTOR
  	tristate "NTC thermistor support"
  	depends on !OF || IIO=n || IIO
  	help
  	  This driver supports NTC thermistors sensor reading and its
  	  interpretation. The driver can also monitor the temperature and
  	  send notifications about the temperature.
  
  	  Currently, this driver supports
  	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ntc-thermistor.
  
  config SENSORS_PC87360
  	tristate "National Semiconductor PC87360 family"
  	depends on !PPC
  	select HWMON_VID
  	help
  	  If you say yes here you get access to the hardware monitoring
  	  functions of the National Semiconductor PC8736x Super-I/O chips.
  	  The PC87360, PC87363 and PC87364 only have fan monitoring and
  	  control.  The PC87365 and PC87366 additionally have voltage and
  	  temperature monitoring.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called pc87360.
  
  config SENSORS_PC87427
  	tristate "National Semiconductor PC87427"
  	depends on !PPC
  	help
  	  If you say yes here you get access to the hardware monitoring
  	  functions of the National Semiconductor PC87427 Super-I/O chip.
  	  The chip has two distinct logical devices, one for fan speed
  	  monitoring and control, and one for voltage and temperature
  	  monitoring. Fan speed monitoring and control are supported, as
  	  well as temperature monitoring. Voltages aren't supported yet.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called pc87427.
  
  config SENSORS_PCF8591
  	tristate "Philips PCF8591 ADC/DAC"
  	depends on I2C
  	default n
  	help
  	  If you say yes here you get support for Philips PCF8591 4-channel
  	  ADC, 1-channel DAC chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called pcf8591.
  
  	  These devices are hard to detect and rarely found on mainstream
  	  hardware.  If unsure, say N.
  
  source drivers/hwmon/pmbus/Kconfig
  
  config SENSORS_SHT15
  	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
  	depends on GPIOLIB
  	help
  	  If you say yes here you get support for the Sensiron SHT10, SHT11,
  	  SHT15, SHT71, SHT75 humidity and temperature sensors.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called sht15.
  
  config SENSORS_SHT21
  	tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
  	depends on I2C
  	help
  	  If you say yes here you get support for the Sensiron SHT21, SHT25
  	  humidity and temperature sensors.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called sht21.
  
  config SENSORS_S3C
  	tristate "Samsung built-in ADC"
  	depends on S3C_ADC
  	help
  	  If you say yes here you get support for the on-board ADCs of
  	  the Samsung S3C24XX, S3C64XX and other series of SoC
  
  	  This driver can also be built as a module. If so, the module
  	  will be called s3c-hwmon.
  
  config SENSORS_S3C_RAW
  	bool "Include raw channel attributes in sysfs"
  	depends on SENSORS_S3C
  	help
  	  Say Y here if you want to include raw copies of all the ADC
  	  channels in sysfs.
  
  config SENSORS_SIS5595
  	tristate "Silicon Integrated Systems Corp. SiS5595"
  	depends on PCI
  	help
  	  If you say yes here you get support for the integrated sensors in
  	  SiS5595 South Bridges.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called sis5595.
  
  config SENSORS_SMM665
  	tristate "Summit Microelectronics SMM665"
  	depends on I2C
  	default n
  	help
  	  If you say yes here you get support for the hardware monitoring
  	  features of the Summit Microelectronics SMM665/SMM665B Six-Channel
  	  Active DC Output Controller / Monitor.
  
  	  Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
  	  Support for those chips is untested.
  
  	  This driver can also be built as a module. If so, the module will
  	  be called smm665.
  
  config SENSORS_DME1737
  	tristate "SMSC DME1737, SCH311x and compatibles"
  	depends on I2C && !PPC
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the hardware monitoring
  	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
  	  Asus A8000 Super-I/O chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called dme1737.
  
  config SENSORS_EMC1403
  	tristate "SMSC EMC1403/23 thermal sensor"
  	depends on I2C
  	help
  	  If you say yes here you get support for the SMSC EMC1403/23
  	  temperature monitoring chip.
  
  	  Threshold values can be configured using sysfs.
  	  Data from the different diodes are accessible via sysfs.
  
  config SENSORS_EMC2103
  	tristate "SMSC EMC2103"
  	depends on I2C
  	help
  	  If you say yes here you get support for the temperature
  	  and fan sensors of the SMSC EMC2103 chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called emc2103.
  
  config SENSORS_EMC6W201
  	tristate "SMSC EMC6W201"
  	depends on I2C
  	help
  	  If you say yes here you get support for the SMSC EMC6W201
  	  hardware monitoring chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called emc6w201.
  
  config SENSORS_SMSC47M1
  	tristate "SMSC LPC47M10x and compatibles"
  	depends on !PPC
  	help
  	  If you say yes here you get support for the integrated fan
  	  monitoring and control capabilities of the SMSC LPC47B27x,
  	  LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
  	  LPC47M192, LPC47M292 and LPC47M997 chips.
  
  	  The temperature and voltage sensor features of the LPC47M15x,
  	  LPC47M192, LPC47M292 and LPC47M997 are supported by another
  	  driver, select also "SMSC LPC47M192 and compatibles" below for
  	  those.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called smsc47m1.
  
  config SENSORS_SMSC47M192
  	tristate "SMSC LPC47M192 and compatibles"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the temperature and
  	  voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
  	  and LPC47M997 chips.
  
  	  The fan monitoring and control capabilities of these chips
  	  are supported by another driver, select
  	  "SMSC LPC47M10x and compatibles" above. You need both drivers
  	  if you want fan control and voltage/temperature sensor support.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called smsc47m192.
  
  config SENSORS_SMSC47B397
  	tristate "SMSC LPC47B397-NC"
  	depends on !PPC
  	help
  	  If you say yes here you get support for the SMSC LPC47B397-NC
  	  sensor chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called smsc47b397.
  
  config SENSORS_SCH56XX_COMMON
  	tristate
  	default n
  
  config SENSORS_SCH5627
  	tristate "SMSC SCH5627"
  	depends on !PPC && WATCHDOG
  	select SENSORS_SCH56XX_COMMON
  	select WATCHDOG_CORE
  	help
  	  If you say yes here you get support for the hardware monitoring
  	  features of the SMSC SCH5627 Super-I/O chip including support for
  	  the integrated watchdog.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called sch5627.
  
  config SENSORS_SCH5636
  	tristate "SMSC SCH5636"
  	depends on !PPC && WATCHDOG
  	select SENSORS_SCH56XX_COMMON
  	select WATCHDOG_CORE
  	help
  	  SMSC SCH5636 Super I/O chips include an embedded microcontroller for
  	  hardware monitoring solutions, allowing motherboard manufacturers to
  	  create their own custom hwmon solution based upon the SCH5636.
  
  	  Currently this driver only supports the Fujitsu Theseus SCH5636 based
  	  hwmon solution. Say yes here if you want support for the Fujitsu
  	  Theseus' hardware monitoring features including support for the
  	  integrated watchdog.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called sch5636.
  
  config SENSORS_ADS1000
  	tristate "Texas Instruments ADS1000"
  	depends on I2C
  	help
  	  If you say yes here you get support for Texas Instruments ADS1000
  	  12-bit ADC device.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ads1000
  
  config SENSORS_ADS1015
  	tristate "Texas Instruments ADS1015"
  	depends on I2C
  	help
  	  If you say yes here you get support for Texas Instruments
  	  ADS1015/ADS1115 12/16-bit 4-input ADC device.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ads1015.
  
  config SENSORS_ADS7828
  	tristate "Texas Instruments ADS7828 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for Texas Instruments ADS7828 and
  	  ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
  	  it is 8-bit on ADS7830.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ads7828.
  
  config SENSORS_ADS7871
  	tristate "Texas Instruments ADS7871 A/D converter"
  	depends on SPI
  	help
  	  If you say yes here you get support for TI ADS7871 & ADS7870
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called ads7871.
  
  config SENSORS_AMC6821
  	tristate "Texas Instruments AMC6821"
  	depends on I2C 
  	help
  	  If you say yes here you get support for the Texas Instruments
  	  AMC6821 hardware monitoring chips.
  
  	  This driver can also be build as a module.  If so, the module
  	  will be called amc6821.
  
  config SENSORS_INA209
  	tristate "TI / Burr Brown INA209"
  	depends on I2C
  	help
  	  If you say yes here you get support for the TI / Burr Brown INA209
  	  voltage / current / power monitor I2C interface.
  
  	  This driver can also be built as a module. If so, the module will
  	  be called ina209.
  
  config SENSORS_INA2XX
  	tristate "Texas Instruments INA219 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for INA219, INA220, INA226, and
  	  INA230 power monitor chips.
  
  	  The INA2xx driver is configured for the default configuration of
  	  the part as described in the datasheet.
  	  Default value for Rshunt is 10 mOhms.
  	  This driver can also be built as a module.  If so, the module
  	  will be called ina2xx.
  
  config SENSORS_THMC50
  	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
  	depends on I2C
  	help
  	  If you say yes here you get support for Texas Instruments THMC50
  	  sensor chips and clones: the Analog Devices ADM1022.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called thmc50.
  
  config SENSORS_TMP102
  	tristate "Texas Instruments TMP102"
  	depends on I2C
  	depends on THERMAL || !THERMAL_OF
  	help
  	  If you say yes here you get support for Texas Instruments TMP102
  	  sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called tmp102.
  
  config SENSORS_TMP401
  	tristate "Texas Instruments TMP401 and compatibles"
  	depends on I2C
  	help
  	  If you say yes here you get support for Texas Instruments TMP401,
  	  TMP411, TMP431, and TMP432 temperature sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called tmp401.
  
  config SENSORS_TMP421
  	tristate "Texas Instruments TMP421 and compatible"
  	depends on I2C
  	help
  	  If you say yes here you get support for Texas Instruments TMP421,
  	  TMP422 and TMP423 temperature sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called tmp421.
  
  config SENSORS_TWL4030_MADC
  	tristate "Texas Instruments TWL4030 MADC Hwmon"
  	depends on TWL4030_MADC
  	help
  	If you say yes here you get hwmon support for triton
  	TWL4030-MADC.
  
  	This driver can also be built as a module. If so it will be called
  	twl4030-madc-hwmon.
  
  config SENSORS_VEXPRESS
  	tristate "Versatile Express"
  	depends on VEXPRESS_CONFIG
  	help
  	  This driver provides support for hardware sensors available on
  	  the ARM Ltd's Versatile Express platform. It can provide wide
  	  range of information like temperature, power, energy.
  
  config SENSORS_VIA_CPUTEMP
  	tristate "VIA CPU temperature sensor"
  	depends on X86
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the temperature
  	  sensor inside your CPU. Supported are all known variants of
  	  the VIA C7 and Nano.
  
  config SENSORS_VIA686A
  	tristate "VIA686A"
  	depends on PCI
  	help
  	  If you say yes here you get support for the integrated sensors in
  	  Via 686A/B South Bridges.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called via686a.
  
  config SENSORS_VT1211
  	tristate "VIA VT1211"
  	depends on !PPC
  	select HWMON_VID
  	help
  	  If you say yes here then you get support for hardware monitoring
  	  features of the VIA VT1211 Super-I/O chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called vt1211.
  
  config SENSORS_VT8231
  	tristate "VIA VT8231"
  	depends on PCI
  	select HWMON_VID
  	help
  	  If you say yes here then you get support for the integrated sensors
  	  in the VIA VT8231 device.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called vt8231.
  
  config SENSORS_W83781D
  	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the Winbond W8378x series
  	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
  	  Asus AS99127F.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83781d.
  
  config SENSORS_W83791D
  	tristate "Winbond W83791D"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the Winbond W83791D chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83791d.
  
  config SENSORS_W83792D
  	tristate "Winbond W83792D"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Winbond W83792D chip.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83792d.
  
  config SENSORS_W83793
  	tristate "Winbond W83793"
  	depends on I2C
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the Winbond W83793
  	  hardware monitoring chip, including support for the integrated
  	  watchdog.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83793.
  
  config SENSORS_W83795
  	tristate "Winbond/Nuvoton W83795G/ADG"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Winbond W83795G and
  	  W83795ADG hardware monitoring chip, including manual fan speed
  	  control.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83795.
  
  config SENSORS_W83795_FANCTRL
  	boolean "Include automatic fan control support (DANGEROUS)"
  	depends on SENSORS_W83795
  	default n
  	help
  	  If you say yes here, support for automatic fan speed control
  	  will be included in the driver.
  
  	  This part of the code wasn't carefully reviewed and tested yet,
  	  so enabling this option is strongly discouraged on production
  	  servers. Only developers and testers should enable it for the
  	  time being.
  
  	  Please also note that this option will create sysfs attribute
  	  files which may change in the future, so you shouldn't rely
  	  on them being stable.
  
  config SENSORS_W83L785TS
  	tristate "Winbond W83L785TS-S"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Winbond W83L785TS-S
  	  sensor chip, which is used on the Asus A7N8X, among other
  	  motherboards.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83l785ts.
  
  config SENSORS_W83L786NG
  	tristate "Winbond W83L786NG, W83L786NR"
  	depends on I2C
  	help
  	  If you say yes here you get support for the Winbond W83L786NG
  	  and W83L786NR sensor chips.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83l786ng.
  
  config SENSORS_W83627HF
  	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
  	depends on !PPC
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the Winbond W836X7 series
  	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
  	  W83697HF.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83627hf.
  
  config SENSORS_W83627EHF
  	tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
  	depends on !PPC
  	select HWMON_VID
  	help
  	  If you say yes here you get support for the hardware
  	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
  
  	  This driver also supports the W83627EHG, which is the lead-free
  	  version of the W83627EHF, and the W83627DHG, which is a similar
  	  chip suited for specific Intel processors that use PECI such as
  	  the Core 2 Duo. And also the W83627UHG, which is a stripped down
  	  version of the W83627DHG (as far as hardware monitoring goes.)
  
  	  This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
  	  (also known as W83667HG-I), and NCT6776F.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called w83627ehf.
  
  config SENSORS_WM831X
  	tristate "WM831x PMICs"
  	depends on MFD_WM831X
  	help
  	  If you say yes here you get support for the hardware
  	  monitoring functionality of the Wolfson Microelectronics
  	  WM831x series of PMICs.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called wm831x-hwmon.
  
  config SENSORS_WM8350
  	tristate "Wolfson Microelectronics WM835x"
  	depends on MFD_WM8350
  	help
  	  If you say yes here you get support for the hardware
  	  monitoring features of the WM835x series of PMICs.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called wm8350-hwmon.
  
  config SENSORS_ULTRA45
  	tristate "Sun Ultra45 PIC16F747"
  	depends on SPARC64
  	help
  	  This driver provides support for the Ultra45 workstation environmental
  	  sensors.
  
  config SENSORS_APPLESMC
  	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
  	depends on INPUT && X86
  	select NEW_LEDS
  	select LEDS_CLASS
  	select INPUT_POLLDEV
  	default n
  	help
  	  This driver provides support for the Apple System Management
  	  Controller, which provides an accelerometer (Apple Sudden Motion
  	  Sensor), light sensors, temperature sensors, keyboard backlight
  	  control and fan control.
  
  	  Only Intel-based Apple's computers are supported (MacBook Pro,
  	  MacBook, MacMini).
  
  	  Data from the different sensors, keyboard backlight control and fan
  	  control are accessible via sysfs.
  
  	  This driver also provides an absolute input class device, allowing
  	  the laptop to act as a pinball machine-esque joystick.
  
  	  Say Y here if you have an applicable laptop and want to experience
  	  the awesome power of applesmc.
  
  config SENSORS_MC13783_ADC
          tristate "Freescale MC13783/MC13892 ADC"
          depends on MFD_MC13XXX
          help
            Support for the A/D converter on MC13783 and MC13892 PMIC.
  
  if ACPI
  
  comment "ACPI drivers"
  
  config SENSORS_ACPI_POWER
  	tristate "ACPI 4.0 power meter"
  	help
  	  This driver exposes ACPI 4.0 power meters as hardware monitoring
  	  devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
  	  and a power meter.
  
  	  To compile this driver as a module, choose M here:
  	  the module will be called acpi_power_meter.
  
  config SENSORS_ATK0110
  	tristate "ASUS ATK0110"
  	depends on X86
  	help
  	  If you say yes here you get support for the ACPI hardware
  	  monitoring interface found in many ASUS motherboards. This
  	  driver will provide readings of fans, voltages and temperatures
  	  through the system firmware.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called asus_atk0110.
  
  endif # ACPI
  
  config SENSORS_MAG3110
  	tristate "Freescale MAG3110 e-compass sensor"
  	depends on I2C && SYSFS
  	help
  	  If you say yes here you get support for the Freescale MAG3110
  	  e-compass sensor.
  	  This driver can also be built as a module.  If so, the module
  	  will be called mag3110.
  
  config MXC_MMA8451
  	tristate "MMA8451 device driver"
  	depends on I2C
  	default y
  
  endif # HWMON