/*
   *  linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
   *
   *  Copyright (C) 2000 ARM Limited
   *  Copyright (C) 2000 Deep Blue Solutions Ltd.
   *  hacked for non-paged-MM by Hyok S. Choi, 2003.
   *
   * This program is free software; you can redistribute it and/or modify
   * it under the terms of the GNU General Public License as published by
   * the Free Software Foundation; either version 2 of the License, or
   * (at your option) any later version.
   *
   *
   * These are the low level assembler for performing cache and TLB
   * functions on the ARM1022E.
   */
  #include <linux/linkage.h>
  #include <linux/init.h>
  #include <asm/assembler.h>
  #include <asm/asm-offsets.h>
  #include <asm/hwcap.h>
  #include <asm/pgtable-hwdef.h>
  #include <asm/pgtable.h>
  #include <asm/ptrace.h>
  
  #include "proc-macros.S"
  
  /*
   * This is the maximum size of an area which will be invalidated
   * using the single invalidate entry instructions.  Anything larger
   * than this, and we go for the whole cache.
   *
   * This value should be chosen such that we choose the cheapest
   * alternative.
   */
  #define MAX_AREA_SIZE	32768
  
  /*
   * The size of one data cache line.
   */
  #define CACHE_DLINESIZE	32
  
  /*
   * The number of data cache segments.
   */
  #define CACHE_DSEGMENTS	16
  
  /*
   * The number of lines in a cache segment.
   */
  #define CACHE_DENTRIES	64
  
  /*
   * This is the size at which it becomes more efficient to
   * clean the whole cache, rather than using the individual
   * cache line maintenance instructions.
   */
  #define CACHE_DLIMIT	32768
  
  	.text
  /*
   * cpu_arm1022_proc_init()
   */
  ENTRY(cpu_arm1022_proc_init)
  	mov	pc, lr
  
  /*
   * cpu_arm1022_proc_fin()
   */
  ENTRY(cpu_arm1022_proc_fin)
  	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
  	bic	r0, r0, #0x1000 		@ ...i............
  	bic	r0, r0, #0x000e 		@ ............wca.
  	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
  	mov	pc, lr
  
  /*
   * cpu_arm1022_reset(loc)
   *
   * Perform a soft reset of the system.	Put the CPU into the
   * same state as it would be if it had been reset, and branch
   * to what would be the reset vector.
   *
   * loc: location to jump to for soft reset
   */
  	.align	5
  	.pushsection	.idmap.text, "ax"
  ENTRY(cpu_arm1022_reset)
  	mov	ip, #0
  	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  #ifdef CONFIG_MMU
  	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
  #endif
  	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
  	bic	ip, ip, #0x000f 		@ ............wcam
  	bic	ip, ip, #0x1100 		@ ...i...s........
  	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
  	mov	pc, r0
  ENDPROC(cpu_arm1022_reset)
  	.popsection
  
  /*
   * cpu_arm1022_do_idle()
   */
  	.align	5
  ENTRY(cpu_arm1022_do_idle)
  	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
  	mov	pc, lr
  
  /* ================================= CACHE ================================ */
  
  	.align	5
  
  /*
   *	flush_icache_all()
   *
   *	Unconditionally clean and invalidate the entire icache.
   */
  ENTRY(arm1022_flush_icache_all)
  #ifndef CONFIG_CPU_ICACHE_DISABLE
  	mov	r0, #0
  	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
  #endif
  	mov	pc, lr
  ENDPROC(arm1022_flush_icache_all)
  
  /*
   *	flush_user_cache_all()
   *
   *	Invalidate all cache entries in a particular address
   *	space.
   */
  ENTRY(arm1022_flush_user_cache_all)
  	/* FALLTHROUGH */
  /*
   *	flush_kern_cache_all()
   *
   *	Clean and invalidate the entire cache.
   */
  ENTRY(arm1022_flush_kern_cache_all)
  	mov	r2, #VM_EXEC
  	mov	ip, #0
  __flush_whole_cache:
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
  1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
  2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
  	subs	r3, r3, #1 << 26
  	bcs	2b				@ entries 63 to 0
  	subs	r1, r1, #1 << 5
  	bcs	1b				@ segments 15 to 0
  #endif
  	tst	r2, #VM_EXEC
  #ifndef CONFIG_CPU_ICACHE_DISABLE
  	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
  #endif
  	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	pc, lr
  
  /*
   *	flush_user_cache_range(start, end, flags)
   *
   *	Invalidate a range of cache entries in the specified
   *	address space.
   *
   *	- start	- start address (inclusive)
   *	- end	- end address (exclusive)
   *	- flags	- vm_flags for this space
   */
  ENTRY(arm1022_flush_user_cache_range)
  	mov	ip, #0
  	sub	r3, r1, r0			@ calculate total size
  	cmp	r3, #CACHE_DLIMIT
  	bhs	__flush_whole_cache
  
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
  	add	r0, r0, #CACHE_DLINESIZE
  	cmp	r0, r1
  	blo	1b
  #endif
  	tst	r2, #VM_EXEC
  #ifndef CONFIG_CPU_ICACHE_DISABLE
  	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
  #endif
  	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	pc, lr
  
  /*
   *	coherent_kern_range(start, end)
   *
   *	Ensure coherency between the Icache and the Dcache in the
   *	region described by start.  If you have non-snooping
   *	Harvard caches, you need to implement this function.
   *
   *	- start	- virtual start address
   *	- end	- virtual end address
   */
  ENTRY(arm1022_coherent_kern_range)
  	/* FALLTHROUGH */
  
  /*
   *	coherent_user_range(start, end)
   *
   *	Ensure coherency between the Icache and the Dcache in the
   *	region described by start.  If you have non-snooping
   *	Harvard caches, you need to implement this function.
   *
   *	- start	- virtual start address
   *	- end	- virtual end address
   */
  ENTRY(arm1022_coherent_user_range)
  	mov	ip, #0
  	bic	r0, r0, #CACHE_DLINESIZE - 1
  1:
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
  #endif
  #ifndef CONFIG_CPU_ICACHE_DISABLE
  	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
  #endif
  	add	r0, r0, #CACHE_DLINESIZE
  	cmp	r0, r1
  	blo	1b
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	r0, #0
  	mov	pc, lr
  
  /*
   *	flush_kern_dcache_area(void *addr, size_t size)
   *
   *	Ensure no D cache aliasing occurs, either with itself or
   *	the I cache
   *
   *	- addr	- kernel address
   *	- size	- region size
   */
  ENTRY(arm1022_flush_kern_dcache_area)
  	mov	ip, #0
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	add	r1, r0, r1
  1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
  	add	r0, r0, #CACHE_DLINESIZE
  	cmp	r0, r1
  	blo	1b
  #endif
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	pc, lr
  
  /*
   *	dma_inv_range(start, end)
   *
   *	Invalidate (discard) the specified virtual address range.
   *	May not write back any entries.  If 'start' or 'end'
   *	are not cache line aligned, those lines must be written
   *	back.
   *
   *	- start	- virtual start address
   *	- end	- virtual end address
   *
   * (same as v4wb)
   */
  arm1022_dma_inv_range:
  	mov	ip, #0
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	tst	r0, #CACHE_DLINESIZE - 1
  	bic	r0, r0, #CACHE_DLINESIZE - 1
  	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
  	tst	r1, #CACHE_DLINESIZE - 1
  	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
  1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
  	add	r0, r0, #CACHE_DLINESIZE
  	cmp	r0, r1
  	blo	1b
  #endif
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	pc, lr
  
  /*
   *	dma_clean_range(start, end)
   *
   *	Clean the specified virtual address range.
   *
   *	- start	- virtual start address
   *	- end	- virtual end address
   *
   * (same as v4wb)
   */
  arm1022_dma_clean_range:
  	mov	ip, #0
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	bic	r0, r0, #CACHE_DLINESIZE - 1
  1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
  	add	r0, r0, #CACHE_DLINESIZE
  	cmp	r0, r1
  	blo	1b
  #endif
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	pc, lr
  
  /*
   *	dma_flush_range(start, end)
   *
   *	Clean and invalidate the specified virtual address range.
   *
   *	- start	- virtual start address
   *	- end	- virtual end address
   */
  ENTRY(arm1022_dma_flush_range)
  	mov	ip, #0
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	bic	r0, r0, #CACHE_DLINESIZE - 1
  1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
  	add	r0, r0, #CACHE_DLINESIZE
  	cmp	r0, r1
  	blo	1b
  #endif
  	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
  	mov	pc, lr
  
  /*
   *	dma_map_area(start, size, dir)
   *	- start	- kernel virtual start address
   *	- size	- size of region
   *	- dir	- DMA direction
   */
  ENTRY(arm1022_dma_map_area)
  	add	r1, r1, r0
  	cmp	r2, #DMA_TO_DEVICE
  	beq	arm1022_dma_clean_range
  	bcs	arm1022_dma_inv_range
  	b	arm1022_dma_flush_range
  ENDPROC(arm1022_dma_map_area)
  
  /*
   *	dma_unmap_area(start, size, dir)
   *	- start	- kernel virtual start address
   *	- size	- size of region
   *	- dir	- DMA direction
   */
  ENTRY(arm1022_dma_unmap_area)
  	mov	pc, lr
  ENDPROC(arm1022_dma_unmap_area)
  
  	.globl	arm1022_flush_kern_cache_louis
  	.equ	arm1022_flush_kern_cache_louis, arm1022_flush_kern_cache_all
  
  	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
  	define_cache_functions arm1022
  
  	.align	5
  ENTRY(cpu_arm1022_dcache_clean_area)
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	mov	ip, #0
  1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
  	add	r0, r0, #CACHE_DLINESIZE
  	subs	r1, r1, #CACHE_DLINESIZE
  	bhi	1b
  #endif
  	mov	pc, lr
  
  /* =============================== PageTable ============================== */
  
  /*
   * cpu_arm1022_switch_mm(pgd)
   *
   * Set the translation base pointer to be as described by pgd.
   *
   * pgd: new page tables
   */
  	.align	5
  ENTRY(cpu_arm1022_switch_mm)
  #ifdef CONFIG_MMU
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
  1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
  2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
  	subs	r3, r3, #1 << 26
  	bcs	2b				@ entries 63 to 0
  	subs	r1, r1, #1 << 5
  	bcs	1b				@ segments 15 to 0
  #endif
  	mov	r1, #0
  #ifndef CONFIG_CPU_ICACHE_DISABLE
  	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
  #endif
  	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
  	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
  	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
  #endif
  	mov	pc, lr
          
  /*
   * cpu_arm1022_set_pte_ext(ptep, pte, ext)
   *
   * Set a PTE and flush it out
   */
  	.align	5
  ENTRY(cpu_arm1022_set_pte_ext)
  #ifdef CONFIG_MMU
  	armv3_set_pte_ext
  	mov	r0, r0
  #ifndef CONFIG_CPU_DCACHE_DISABLE
  	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
  #endif
  #endif /* CONFIG_MMU */
  	mov	pc, lr
  
  	.type	__arm1022_setup, #function
  __arm1022_setup:
  	mov	r0, #0
  	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
  	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
  #ifdef CONFIG_MMU
  	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
  #endif
  	adr	r5, arm1022_crval
  	ldmia	r5, {r5, r6}
  	mrc	p15, 0, r0, c1, c0		@ get control register v4
  	bic	r0, r0, r5
  	orr	r0, r0, r6
  #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
  	orr	r0, r0, #0x4000 		@ .R..............
  #endif
  	mov	pc, lr
  	.size	__arm1022_setup, . - __arm1022_setup
  
  	/*
  	 *  R
  	 * .RVI ZFRS BLDP WCAM
  	 * .011 1001 ..11 0101
  	 * 
  	 */
  	.type	arm1022_crval, #object
  arm1022_crval:
  	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
  
  	__INITDATA
  	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
  	define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort
  
  	.section ".rodata"
  
  	string	cpu_arch_name, "armv5te"
  	string	cpu_elf_name, "v5"
  	string	cpu_arm1022_name, "ARM1022"
  
  	.align
  
  	.section ".proc.info.init", #alloc, #execinstr
  
  	.type	__arm1022_proc_info,#object
  __arm1022_proc_info:
  	.long	0x4105a220			@ ARM 1022E (v5TE)
  	.long	0xff0ffff0
  	.long   PMD_TYPE_SECT | \
  		PMD_BIT4 | \
  		PMD_SECT_AP_WRITE | \
  		PMD_SECT_AP_READ
  	.long   PMD_TYPE_SECT | \
  		PMD_BIT4 | \
  		PMD_SECT_AP_WRITE | \
  		PMD_SECT_AP_READ
  	b	__arm1022_setup
  	.long	cpu_arch_name
  	.long	cpu_elf_name
  	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
  	.long	cpu_arm1022_name
  	.long	arm1022_processor_functions
  	.long	v4wbi_tlb_fns
  	.long	v4wb_user_fns
  	.long	arm1022_cache_fns
  	.size	__arm1022_proc_info, . - __arm1022_proc_info