if ARCH_PXA
  
  menu "Intel PXA2xx/PXA3xx Implementations"
  
  comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
  
  config MACH_PXA3XX_DT
  	bool "Support PXA3xx platforms from device tree"
  	select CPU_PXA300
  	select HAVE_PWM
  	select POWER_SUPPLY
  	select PXA3xx
  	select USE_OF
  	help
  	  Include support for Marvell PXA3xx based platforms using
  	  the device tree. Needn't select any other machine while
  	  MACH_PXA3XX_DT is enabled.
  
  config ARCH_LUBBOCK
  	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
  	select PXA25x
  	select SA1111
  
  config MACH_MAINSTONE
  	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
  	select HAVE_PWM
  	select PXA27x
  
  config MACH_ZYLONITE
  	bool
  	select HAVE_PWM
  	select PXA3xx
  
  config MACH_ZYLONITE300
  	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
  	select CPU_PXA300
  	select CPU_PXA310
  	select MACH_ZYLONITE
  
  config MACH_ZYLONITE320
  	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
  	select CPU_PXA320
  	select MACH_ZYLONITE
  
  config MACH_LITTLETON
  	bool "PXA3xx Form Factor Platform (aka Littleton)"
  	select CPU_PXA300
  	select CPU_PXA310
  	select PXA3xx
  
  config MACH_TAVOREVB
  	bool "PXA930 Evaluation Board (aka TavorEVB)"
  	select CPU_PXA930
  	select CPU_PXA935
  	select PXA3xx
  
  config MACH_SAAR
  	bool "PXA930 Handheld Platform (aka SAAR)"
  	select CPU_PXA930
  	select CPU_PXA935
  	select PXA3xx
  
  comment "Third Party Dev Platforms (sorted by vendor name)"
  
  config ARCH_PXA_IDP
  	bool "Accelent Xscale IDP"
  	select PXA25x
  
  config ARCH_VIPER
  	bool "Arcom/Eurotech VIPER SBC"
  	select ARCOM_PCMCIA
  	select HAVE_PWM
  	select I2C_GPIO
  	select ISA
  	select PXA25x
  	select PXA_HAVE_ISA_IRQS
  
  config MACH_ARCOM_ZEUS
  	bool "Arcom/Eurotech ZEUS SBC"
  	select ARCOM_PCMCIA
  	select ISA
  	select PXA27x
  	select PXA_HAVE_ISA_IRQS
  
  config MACH_BALLOON3
  	bool "Balloon 3 board"
  	select IWMMXT
  	select PXA27x
  
  config MACH_CSB726
  	bool "Enable Cogent CSB726 System On a Module"
  	select IWMMXT
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on a Cogent
  	  CSB726 System On Module.
  
  config CSB726_CSB701
  	bool "Enable support for CSB701 baseboard"
  	depends on MACH_CSB726
  
  config MACH_ARMCORE
  	bool "CompuLab CM-X255/CM-X270 modules"
  	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
  	select IWMMXT
  	select MIGHT_HAVE_PCI
  	select NEED_MACH_IO_H if PCI
  	select PXA25x
  	select PXA27x
  
  config MACH_EM_X270
  	bool "CompuLab EM-x270 platform"
  	select PXA27x
  
  config MACH_EXEDA
  	bool "CompuLab eXeda platform"
  	select PXA27x
  
  config MACH_CM_X300
  	bool "CompuLab CM-X300 modules"
  	select CPU_PXA300
  	select CPU_PXA310
  	select HAVE_PWM
  	select PXA3xx
  
  config MACH_CAPC7117
  	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
  	select CPU_PXA320
  	select PXA3xx
  
  config ARCH_GUMSTIX
  	bool "Gumstix XScale 255 boards"
  	select PXA25x
  	help
  	  Say Y here if you intend to run this kernel on
  	  Basix, Connex, ws-200ax, ws-400ax systems
  
  choice
  	prompt "Gumstix Carrier/Expansion Board"
  	depends on ARCH_GUMSTIX
  
  config GUMSTIX_AM200EPD
  	bool "Enable AM200EPD board support"
  
  config GUMSTIX_AM300EPD
  	bool "Enable AM300EPD board support"
  
  endchoice
  
  config MACH_INTELMOTE2
  	bool "Intel Mote 2 Platform"
  	select IWMMXT
  	select PXA27x
  
  config MACH_STARGATE2
  	bool "Intel Stargate 2 Platform"
  	select IWMMXT
  	select PXA27x
  
  config MACH_XCEP
  	bool "Iskratel Electronics XCEP"
  	select MTD
  	select MTD_CFI
  	select MTD_CFI_INTELEXT
  	select MTD_PHYSMAP
  	select PXA25x
  	select SMC91X
  	help
  	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
  	  Tuned for usage in Libera instruments for particle accelerators.
  
  config TRIZEPS_PXA
  	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
  
  config MACH_TRIZEPS4
  	bool "Keith und Koep Trizeps4 DIMM-Module"
  	depends on TRIZEPS_PXA
  	select PXA27x
  	select TRIZEPS_PCMCIA
  
  config MACH_TRIZEPS4WL
  	bool "Keith und Koep Trizeps4-WL DIMM-Module"
  	depends on TRIZEPS_PXA
  	select PXA27x
  	select TRIZEPS_PCMCIA
  
  choice
  	prompt "Select base board for Trizeps module"
  	depends on TRIZEPS_PXA
  
  config MACH_TRIZEPS_CONXS
  	bool "ConXS Eval Board"
  
  config MACH_TRIZEPS_UCONXS
  	bool "uConXS Eval Board"
  
  config MACH_TRIZEPS_ANY
  	bool "another Board"
  
  endchoice
  
  config ARCOM_PCMCIA
  	bool
  	help
  	  Generic option for Arcom Viper/Zeus PCMCIA
  
  config TRIZEPS_PCMCIA
  	bool
  	help
  	  Enable PCMCIA support for Trizeps modules
  
  config MACH_LOGICPD_PXA270
  	bool "LogicPD PXA270 Card Engine Development Platform"
  	select HAVE_PWM
  	select PXA27x
  
  config MACH_PCM027
  	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
  	select IWMMXT
  	select PXA27x
  
  config MACH_PCM990_BASEBOARD
  	bool "PHYTEC PCM-990 development board"
  	depends on MACH_PCM027
  	select HAVE_PWM
  
  choice
  	prompt "display on pcm990"
  	depends on MACH_PCM990_BASEBOARD
  
  config PCM990_DISPLAY_SHARP
  	bool "sharp lq084v1dg21 stn display"
  
  config PCM990_DISPLAY_NEC
  	bool "nec nl6448bc20_18d tft display"
  
  config PCM990_DISPLAY_NONE
  	bool "no display"
  
  endchoice
  
  config MACH_COLIBRI
  	bool "Toradex Colibri PXA270"
  	select PXA27x
  
  config MACH_COLIBRI_PXA270_INCOME
  	bool "Income s.r.o. PXA270 SBC"
  	depends on MACH_COLIBRI
  	select HAVE_PWM
  	select PXA27x
  
  config MACH_COLIBRI300
  	bool "Toradex Colibri PXA300/310"
  	select CPU_PXA300
  	select CPU_PXA310
  	select PXA3xx
  
  config MACH_COLIBRI320
  	bool "Toradex Colibri PXA320"
  	select CPU_PXA320
  	select PXA3xx
  
  config MACH_COLIBRI_EVALBOARD
  	bool "Toradex Colibri Evaluation Carrier Board support"
  	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
  
  config MACH_VPAC270
  	bool "Voipac PXA270"
  	select HAVE_PATA_PLATFORM
  	select PXA27x
  	help
  	  PXA270 based Single Board Computer.
  
  comment "End-user Products (sorted by vendor name)"
  
  config MACH_H4700
  	bool "HP iPAQ hx4700"
  	select HAVE_PWM
  	select IWMMXT
  	select PXA27x
  
  config MACH_H5000
  	bool "HP iPAQ h5000"
  	select PXA25x
  
  config MACH_HIMALAYA
  	bool "HTC Himalaya Support"
  	select CPU_PXA26x
  
  config MACH_MAGICIAN
  	bool "Enable HTC Magician Support"
  	select HAVE_PWM
  	select IWMMXT
  	select PXA27x
  
  config MACH_MIOA701
  	bool "Mitac Mio A701 Support"
  	select GPIO_SYSFS
  	select HAVE_PWM
  	select IWMMXT
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on a
  	  MIO A701. Currently there is only basic support
  	  for this PDA.
  
  config PXA_EZX
  	bool "Motorola EZX Platform"
  	select HAVE_PWM
  	select IWMMXT
  	select PXA27x
  
  config MACH_EZX_A780
  	bool "Motorola EZX A780"
  	default y
  	depends on PXA_EZX
  
  config MACH_EZX_E680
  	bool "Motorola EZX E680"
  	default y
  	depends on PXA_EZX
  
  config MACH_EZX_A1200
  	bool "Motorola EZX A1200"
  	default y
  	depends on PXA_EZX
  
  config MACH_EZX_A910
  	bool "Motorola EZX A910"
  	default y
  	depends on PXA_EZX
  
  config MACH_EZX_E6
  	bool "Motorola EZX E6"
  	default y
  	depends on PXA_EZX
  
  config MACH_EZX_E2
  	bool "Motorola EZX E2"
  	default y
  	depends on PXA_EZX
  
  config MACH_MP900C
  	bool "Nec Mobilepro 900/c"
  	select PXA25x
  
  config ARCH_PXA_PALM
  	bool "PXA based Palm PDAs"
  	select HAVE_PWM
  
  config MACH_PALM27X
  	bool
  
  config MACH_PALMTE2
  	bool "Palm Tungsten|E2"
  	default y
  	depends on ARCH_PXA_PALM
  	select PXA25x
  	help
  	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
  	  handheld computer.
  
  config MACH_PALMTC
  	bool "Palm Tungsten|C"
  	default y
  	depends on ARCH_PXA_PALM
  	select PXA25x
  	help
  	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
  	  handheld computer.
  
  config MACH_PALMT5
  	bool "Palm Tungsten|T5"
  	default y
  	depends on ARCH_PXA_PALM
  	select IWMMXT
  	select MACH_PALM27X
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
  	  handheld computer.
  
  config MACH_PALMTX
  	bool "Palm T|X"
  	default y
  	depends on ARCH_PXA_PALM
  	select IWMMXT
  	select MACH_PALM27X
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on a Palm T|X
  	  handheld computer.
  
  config MACH_PALMZ72
  	bool "Palm Zire 72"
  	default y
  	depends on ARCH_PXA_PALM
  	select IWMMXT
  	select MACH_PALM27X
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on Palm Zire 72
  	  handheld computer.
  
  config MACH_PALMLD
  	bool "Palm LifeDrive"
  	default y
  	depends on ARCH_PXA_PALM
  	select IWMMXT
  	select MACH_PALM27X
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on a Palm LifeDrive
  	  handheld computer.
  
  config PALM_TREO
  	bool
  	depends on ARCH_PXA_PALM
  
  config MACH_CENTRO
  	bool "Palm Centro 685 (GSM)"
  	default y
  	depends on ARCH_PXA_PALM
  	select IWMMXT
  	select MACH_PALM27X
  	select PALM_TREO
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
  	  smartphone.
  
  config MACH_TREO680
  	bool "Palm Treo 680"
  	default y
  	depends on ARCH_PXA_PALM
  	select IWMMXT
  	select MACH_PALM27X
  	select PALM_TREO
  	select PXA27x
  	help
  	  Say Y here if you intend to run this kernel on Palm Treo 680
  	  smartphone.
  
  config MACH_RAUMFELD_RC
  	bool "Raumfeld Controller"
  	select CPU_PXA300
  	select HAVE_PWM
  	select POWER_SUPPLY
  	select PXA3xx
  
  config MACH_RAUMFELD_CONNECTOR
  	bool "Raumfeld Connector"
  	select CPU_PXA300
  	select POWER_SUPPLY
  	select PXA3xx
  
  config MACH_RAUMFELD_SPEAKER
  	bool "Raumfeld Speaker"
  	select CPU_PXA300
  	select POWER_SUPPLY
  	select PXA3xx
  
  config PXA_SHARPSL
  	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
  	select SHARP_PARAM
  	select SHARP_SCOOP
  	help
  	  Say Y here if you intend to run this kernel on a
  	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
  	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
  	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
  	  handheld computer.
  
  config PXA_SHARPSL_DETECT_MACH_ID
  	bool "Detect machine ID at run-time in the decompressor"
  	depends on PXA_SHARPSL
  	help
  	  Say Y here if you want the zImage decompressor to detect
  	  the Zaurus machine ID at run-time. For latest kexec-based
  	  boot loader, this is not necessary.
  
  config MACH_POODLE
  	bool "Enable Sharp SL-5600 (Poodle) Support"
  	depends on PXA_SHARPSL
  	select PXA25x
  	select SHARP_LOCOMO
  
  config MACH_CORGI
  	bool "Enable Sharp SL-C700 (Corgi) Support"
  	depends on PXA_SHARPSL
  	select PXA25x
  	select PXA_SHARP_C7xx
  
  config MACH_SHEPHERD
  	bool "Enable Sharp SL-C750 (Shepherd) Support"
  	depends on PXA_SHARPSL
  	select PXA25x
  	select PXA_SHARP_C7xx
  
  config MACH_HUSKY
  	bool "Enable Sharp SL-C760 (Husky) Support"
  	depends on PXA_SHARPSL
  	select PXA25x
  	select PXA_SHARP_C7xx
  
  config MACH_AKITA
  	bool "Enable Sharp SL-1000 (Akita) Support"
  	depends on PXA_SHARPSL
  	select I2C
  	select I2C_PXA
  	select MACH_SPITZ
  	select PXA27x
  	select PXA_SHARP_Cxx00
  
  config MACH_SPITZ
  	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
  	depends on PXA_SHARPSL
  	select PXA27x
  	select PXA_SHARP_Cxx00
  
  config MACH_BORZOI
  	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
  	depends on PXA_SHARPSL
  	select PXA27x
  	select PXA_SHARP_Cxx00
  
  config MACH_TOSA
  	bool "Enable Sharp SL-6000x (Tosa) Support"
  	depends on PXA_SHARPSL
  	select PXA25x
  
  config TOSA_BT
  	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
  	depends on MACH_TOSA
  	select RFKILL
  	help
  	  This is a simple driver that is able to control
  	  the state of built in bluetooth chip on tosa.
  
  config TOSA_USE_EXT_KEYCODES
  	bool "Tosa keyboard: use extended keycodes"
  	depends on MACH_TOSA
  	default n
  	help
  	  Say Y here to enable the tosa keyboard driver to generate extended
  	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
  	  by either console keyboard driver or by Kdrive keybd driver.
  
  	  Say Y only if you know, what you are doing!
  
  config MACH_ICONTROL
  	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
  	select CPU_PXA320
  	select PXA3xx
  
  config ARCH_PXA_ESERIES
  	bool "PXA based Toshiba e-series PDAs"
  	select FB_W100
  	select PXA25x
  
  config MACH_E330
  	bool "Toshiba e330"
  	default y
  	depends on ARCH_PXA_ESERIES
  	help
  	  Say Y here if you intend to run this kernel on a Toshiba
  	  e330 family PDA.
  
  config MACH_E350
  	bool "Toshiba e350"
  	default y
  	depends on ARCH_PXA_ESERIES
  	help
  	  Say Y here if you intend to run this kernel on a Toshiba
  	  e350 family PDA.
  
  config MACH_E740
  	bool "Toshiba e740"
  	default y
  	depends on ARCH_PXA_ESERIES
  	help
  	  Say Y here if you intend to run this kernel on a Toshiba
  	  e740 family PDA.
  
  config MACH_E750
  	bool "Toshiba e750"
  	default y
  	depends on ARCH_PXA_ESERIES
  	help
  	  Say Y here if you intend to run this kernel on a Toshiba
  	  e750 family PDA.
  
  config MACH_E400
  	bool "Toshiba e400"
  	default y
  	depends on ARCH_PXA_ESERIES
  	help
  	  Say Y here if you intend to run this kernel on a Toshiba
  	  e400 family PDA.
  
  config MACH_E800
  	bool "Toshiba e800"
  	default y
  	depends on ARCH_PXA_ESERIES
  	help
  	  Say Y here if you intend to run this kernel on a Toshiba
  	  e800 family PDA.
  
  config MACH_ZIPIT2
  	bool "Zipit Z2 Handheld"
  	select HAVE_PWM
  	select PXA27x
  endmenu
  
  config PXA25x
  	bool
  	select CPU_XSCALE
  	help
  	  Select code specific to PXA21x/25x/26x variants
  
  config PXA27x
  	bool
  	select CPU_XSCALE
  	help
  	  Select code specific to PXA27x variants
  
  config CPU_PXA26x
  	bool
  	select PXA25x
  	help
  	  Select code specific to PXA26x (codename Dalhart)
  
  config PXA3xx
  	bool
  	select CPU_XSC3
  	help
  	  Select code specific to PXA3xx variants
  
  config CPU_PXA300
  	bool
  	select PXA3xx
  	help
  	  PXA300 (codename Monahans-L)
  
  config CPU_PXA310
  	bool
  	select CPU_PXA300
  	select PXA310_ULPI if USB_ULPI
  	help
  	  PXA310 (codename Monahans-LV)
  
  config CPU_PXA320
  	bool
  	select PXA3xx
  	help
  	  PXA320 (codename Monahans-P)
  
  config CPU_PXA930
  	bool
  	select PXA3xx
  	help
  	  PXA930 (codename Tavor-P)
  
  config CPU_PXA935
  	bool
  	select CPU_PXA930
  	help
  	  PXA935 (codename Tavor-P65)
  
  config PXA_SHARP_C7xx
  	bool
  	select SHARPSL_PM
  	help
  	  Enable support for all Sharp C7xx models
  
  config PXA_SHARP_Cxx00
  	bool
  	select SHARPSL_PM
  	help
  	  Enable common support for Sharp Cxx00 models
  
  config SHARPSL_PM
  	bool
  	select APM_EMULATION
  	select SHARPSL_PM_MAX1111
  
  config SHARPSL_PM_MAX1111
  	bool
  	select HWMON
  	select SENSORS_MAX1111
  	select SPI
  	select SPI_MASTER
  
  config PXA_HAVE_ISA_IRQS
  	bool
  
  config PXA310_ULPI
  	bool
  
  endif