Documentation for /proc/sys/kernel/*	kernel version 2.2.10
  	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
  	(c) 2009,        Shen Feng<shen@cn.fujitsu.com>
  
  For general info and legal blurb, please look in README.
  
  ==============================================================
  
  This file contains documentation for the sysctl files in
  /proc/sys/kernel/ and is valid for Linux kernel version 2.2.
  
  The files in this directory can be used to tune and monitor
  miscellaneous and general things in the operation of the Linux
  kernel. Since some of the files _can_ be used to screw up your
  system, it is advisable to read both documentation and source
  before actually making adjustments.
  
  Currently, these files might (depending on your configuration)
  show up in /proc/sys/kernel:
  
  - acct
  - acpi_video_flags
  - auto_msgmni
  - bootloader_type	     [ X86 only ]
  - bootloader_version	     [ X86 only ]
  - callhome		     [ S390 only ]
  - cap_last_cap
  - core_pattern
  - core_pipe_limit
  - core_uses_pid
  - ctrl-alt-del
  - dmesg_restrict
  - domainname
  - hostname
  - hotplug
  - hung_task_panic
  - hung_task_check_count
  - hung_task_timeout_secs
  - hung_task_warnings
  - kexec_load_disabled
  - kptr_restrict
  - kstack_depth_to_print       [ X86 only ]
  - l2cr                        [ PPC only ]
  - modprobe                    ==> Documentation/debugging-modules.txt
  - modules_disabled
  - msg_next_id		      [ sysv ipc ]
  - msgmax
  - msgmnb
  - msgmni
  - nmi_watchdog
  - osrelease
  - ostype
  - overflowgid
  - overflowuid
  - panic
  - panic_on_oops
  - panic_on_unrecovered_nmi
  - panic_on_stackoverflow
  - pid_max
  - powersave-nap               [ PPC only ]
  - printk
  - printk_delay
  - printk_ratelimit
  - printk_ratelimit_burst
  - randomize_va_space
  - real-root-dev               ==> Documentation/initrd.txt
  - reboot-cmd                  [ SPARC only ]
  - rtsig-max
  - rtsig-nr
  - sem
  - sem_next_id		      [ sysv ipc ]
  - sg-big-buff                 [ generic SCSI device (sg) ]
  - shm_next_id		      [ sysv ipc ]
  - shm_rmid_forced
  - shmall
  - shmmax                      [ sysv ipc ]
  - shmmni
  - stop-a                      [ SPARC only ]
  - sysrq                       ==> Documentation/sysrq.txt
  - tainted
  - threads-max
  - unknown_nmi_panic
  - watchdog_thresh
  - version
  
  ==============================================================
  
  acct:
  
  highwater lowwater frequency
  
  If BSD-style process accounting is enabled these values control
  its behaviour. If free space on filesystem where the log lives
  goes below <lowwater>% accounting suspends. If free space gets
  above <highwater>% accounting resumes. <Frequency> determines
  how often do we check the amount of free space (value is in
  seconds). Default:
  4 2 30
  That is, suspend accounting if there left <= 2% free; resume it
  if we got >=4%; consider information about amount of free space
  valid for 30 seconds.
  
  ==============================================================
  
  acpi_video_flags:
  
  flags
  
  See Doc*/kernel/power/video.txt, it allows mode of video boot to be
  set during run time.
  
  ==============================================================
  
  auto_msgmni:
  
  Enables/Disables automatic recomputing of msgmni upon memory add/remove
  or upon ipc namespace creation/removal (see the msgmni description
  above). Echoing "1" into this file enables msgmni automatic recomputing.
  Echoing "0" turns it off. auto_msgmni default value is 1.
  
  
  ==============================================================
  
  bootloader_type:
  
  x86 bootloader identification
  
  This gives the bootloader type number as indicated by the bootloader,
  shifted left by 4, and OR'd with the low four bits of the bootloader
  version.  The reason for this encoding is that this used to match the
  type_of_loader field in the kernel header; the encoding is kept for
  backwards compatibility.  That is, if the full bootloader type number
  is 0x15 and the full version number is 0x234, this file will contain
  the value 340 = 0x154.
  
  See the type_of_loader and ext_loader_type fields in
  Documentation/x86/boot.txt for additional information.
  
  ==============================================================
  
  bootloader_version:
  
  x86 bootloader version
  
  The complete bootloader version number.  In the example above, this
  file will contain the value 564 = 0x234.
  
  See the type_of_loader and ext_loader_ver fields in
  Documentation/x86/boot.txt for additional information.
  
  ==============================================================
  
  callhome:
  
  Controls the kernel's callhome behavior in case of a kernel panic.
  
  The s390 hardware allows an operating system to send a notification
  to a service organization (callhome) in case of an operating system panic.
  
  When the value in this file is 0 (which is the default behavior)
  nothing happens in case of a kernel panic. If this value is set to "1"
  the complete kernel oops message is send to the IBM customer service
  organization in case the mainframe the Linux operating system is running
  on has a service contract with IBM.
  
  ==============================================================
  
  cap_last_cap
  
  Highest valid capability of the running kernel.  Exports
  CAP_LAST_CAP from the kernel.
  
  ==============================================================
  
  core_pattern:
  
  core_pattern is used to specify a core dumpfile pattern name.
  . max length 128 characters; default value is "core"
  . core_pattern is used as a pattern template for the output filename;
    certain string patterns (beginning with '%') are substituted with
    their actual values.
  . backward compatibility with core_uses_pid:
  	If core_pattern does not include "%p" (default does not)
  	and core_uses_pid is set, then .PID will be appended to
  	the filename.
  . corename format specifiers:
  	%<NUL>	'%' is dropped
  	%%	output one '%'
  	%p	pid
  	%P	global pid (init PID namespace)
  	%u	uid
  	%g	gid
  	%d	dump mode, matches PR_SET_DUMPABLE and
  		/proc/sys/fs/suid_dumpable
  	%s	signal number
  	%t	UNIX time of dump
  	%h	hostname
  	%e	executable filename (may be shortened)
  	%E	executable path
  	%<OTHER> both are dropped
  . If the first character of the pattern is a '|', the kernel will treat
    the rest of the pattern as a command to run.  The core dump will be
    written to the standard input of that program instead of to a file.
  
  ==============================================================
  
  core_pipe_limit:
  
  This sysctl is only applicable when core_pattern is configured to pipe
  core files to a user space helper (when the first character of
  core_pattern is a '|', see above).  When collecting cores via a pipe
  to an application, it is occasionally useful for the collecting
  application to gather data about the crashing process from its
  /proc/pid directory.  In order to do this safely, the kernel must wait
  for the collecting process to exit, so as not to remove the crashing
  processes proc files prematurely.  This in turn creates the
  possibility that a misbehaving userspace collecting process can block
  the reaping of a crashed process simply by never exiting.  This sysctl
  defends against that.  It defines how many concurrent crashing
  processes may be piped to user space applications in parallel.  If
  this value is exceeded, then those crashing processes above that value
  are noted via the kernel log and their cores are skipped.  0 is a
  special value, indicating that unlimited processes may be captured in
  parallel, but that no waiting will take place (i.e. the collecting
  process is not guaranteed access to /proc/<crashing pid>/).  This
  value defaults to 0.
  
  ==============================================================
  
  core_uses_pid:
  
  The default coredump filename is "core".  By setting
  core_uses_pid to 1, the coredump filename becomes core.PID.
  If core_pattern does not include "%p" (default does not)
  and core_uses_pid is set, then .PID will be appended to
  the filename.
  
  ==============================================================
  
  ctrl-alt-del:
  
  When the value in this file is 0, ctrl-alt-del is trapped and
  sent to the init(1) program to handle a graceful restart.
  When, however, the value is > 0, Linux's reaction to a Vulcan
  Nerve Pinch (tm) will be an immediate reboot, without even
  syncing its dirty buffers.
  
  Note: when a program (like dosemu) has the keyboard in 'raw'
  mode, the ctrl-alt-del is intercepted by the program before it
  ever reaches the kernel tty layer, and it's up to the program
  to decide what to do with it.
  
  ==============================================================
  
  dmesg_restrict:
  
  This toggle indicates whether unprivileged users are prevented
  from using dmesg(8) to view messages from the kernel's log buffer.
  When dmesg_restrict is set to (0) there are no restrictions. When
  dmesg_restrict is set set to (1), users must have CAP_SYSLOG to use
  dmesg(8).
  
  The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the
  default value of dmesg_restrict.
  
  ==============================================================
  
  domainname & hostname:
  
  These files can be used to set the NIS/YP domainname and the
  hostname of your box in exactly the same way as the commands
  domainname and hostname, i.e.:
  # echo "darkstar" > /proc/sys/kernel/hostname
  # echo "mydomain" > /proc/sys/kernel/domainname
  has the same effect as
  # hostname "darkstar"
  # domainname "mydomain"
  
  Note, however, that the classic darkstar.frop.org has the
  hostname "darkstar" and DNS (Internet Domain Name Server)
  domainname "frop.org", not to be confused with the NIS (Network
  Information Service) or YP (Yellow Pages) domainname. These two
  domain names are in general different. For a detailed discussion
  see the hostname(1) man page.
  
  ==============================================================
  
  hotplug:
  
  Path for the hotplug policy agent.
  Default value is "/sbin/hotplug".
  
  ==============================================================
  
  hung_task_panic:
  
  Controls the kernel's behavior when a hung task is detected.
  This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
  
  0: continue operation. This is the default behavior.
  
  1: panic immediately.
  
  ==============================================================
  
  hung_task_check_count:
  
  The upper bound on the number of tasks that are checked.
  This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
  
  ==============================================================
  
  hung_task_timeout_secs:
  
  Check interval. When a task in D state did not get scheduled
  for more than this value report a warning.
  This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
  
  0: means infinite timeout - no checking done.
  Possible values to set are in range {0..LONG_MAX/HZ}.
  
  ==============================================================
  
  hung_task_warning:
  
  The maximum number of warnings to report. During a check interval
  When this value is reached, no more the warnings will be reported.
  This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
  
  -1: report an infinite number of warnings.
  
  ==============================================================
  
  kexec_load_disabled:
  
  A toggle indicating if the kexec_load syscall has been disabled. This
  value defaults to 0 (false: kexec_load enabled), but can be set to 1
  (true: kexec_load disabled). Once true, kexec can no longer be used, and
  the toggle cannot be set back to false. This allows a kexec image to be
  loaded before disabling the syscall, allowing a system to set up (and
  later use) an image without it being altered. Generally used together
  with the "modules_disabled" sysctl.
  
  ==============================================================
  
  kptr_restrict:
  
  This toggle indicates whether restrictions are placed on
  exposing kernel addresses via /proc and other interfaces.
  
  When kptr_restrict is set to (0), the default, there are no restrictions.
  
  When kptr_restrict is set to (1), kernel pointers printed using the %pK
  format specifier will be replaced with 0's unless the user has CAP_SYSLOG
  and effective user and group ids are equal to the real ids. This is
  because %pK checks are done at read() time rather than open() time, so
  if permissions are elevated between the open() and the read() (e.g via
  a setuid binary) then %pK will not leak kernel pointers to unprivileged
  users. Note, this is a temporary solution only. The correct long-term
  solution is to do the permission checks at open() time. Consider removing
  world read permissions from files that use %pK, and using dmesg_restrict
  to protect against uses of %pK in dmesg(8) if leaking kernel pointer
  values to unprivileged users is a concern.
  
  When kptr_restrict is set to (2), kernel pointers printed using
  %pK will be replaced with 0's regardless of privileges.
  
  ==============================================================
  
  kstack_depth_to_print: (X86 only)
  
  Controls the number of words to print when dumping the raw
  kernel stack.
  
  ==============================================================
  
  l2cr: (PPC only)
  
  This flag controls the L2 cache of G3 processor boards. If
  0, the cache is disabled. Enabled if nonzero.
  
  ==============================================================
  
  modules_disabled:
  
  A toggle value indicating if modules are allowed to be loaded
  in an otherwise modular kernel.  This toggle defaults to off
  (0), but can be set true (1).  Once true, modules can be
  neither loaded nor unloaded, and the toggle cannot be set back
  to false.  Generally used with the "kexec_load_disabled" toggle.
  
  ==============================================================
  
  msg_next_id, sem_next_id, and shm_next_id:
  
  These three toggles allows to specify desired id for next allocated IPC
  object: message, semaphore or shared memory respectively.
  
  By default they are equal to -1, which means generic allocation logic.
  Possible values to set are in range {0..INT_MAX}.
  
  Notes:
  1) kernel doesn't guarantee, that new object will have desired id. So,
  it's up to userspace, how to handle an object with "wrong" id.
  2) Toggle with non-default value will be set back to -1 by kernel after
  successful IPC object allocation.
  
  ==============================================================
  
  nmi_watchdog:
  
  Enables/Disables the NMI watchdog on x86 systems. When the value is
  non-zero the NMI watchdog is enabled and will continuously test all
  online cpus to determine whether or not they are still functioning
  properly. Currently, passing "nmi_watchdog=" parameter at boot time is
  required for this function to work.
  
  If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel
  parameter), the NMI watchdog shares registers with oprofile. By
  disabling the NMI watchdog, oprofile may have more registers to
  utilize.
  
  ==============================================================
  
  numa_balancing
  
  Enables/disables automatic page fault based NUMA memory
  balancing. Memory is moved automatically to nodes
  that access it often.
  
  Enables/disables automatic NUMA memory balancing. On NUMA machines, there
  is a performance penalty if remote memory is accessed by a CPU. When this
  feature is enabled the kernel samples what task thread is accessing memory
  by periodically unmapping pages and later trapping a page fault. At the
  time of the page fault, it is determined if the data being accessed should
  be migrated to a local memory node.
  
  The unmapping of pages and trapping faults incur additional overhead that
  ideally is offset by improved memory locality but there is no universal
  guarantee. If the target workload is already bound to NUMA nodes then this
  feature should be disabled. Otherwise, if the system overhead from the
  feature is too high then the rate the kernel samples for NUMA hinting
  faults may be controlled by the numa_balancing_scan_period_min_ms,
  numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms,
  numa_balancing_scan_size_mb, numa_balancing_settle_count sysctls and
  numa_balancing_migrate_deferred.
  
  ==============================================================
  
  numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms,
  numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb
  
  Automatic NUMA balancing scans tasks address space and unmaps pages to
  detect if pages are properly placed or if the data should be migrated to a
  memory node local to where the task is running.  Every "scan delay" the task
  scans the next "scan size" number of pages in its address space. When the
  end of the address space is reached the scanner restarts from the beginning.
  
  In combination, the "scan delay" and "scan size" determine the scan rate.
  When "scan delay" decreases, the scan rate increases.  The scan delay and
  hence the scan rate of every task is adaptive and depends on historical
  behaviour. If pages are properly placed then the scan delay increases,
  otherwise the scan delay decreases.  The "scan size" is not adaptive but
  the higher the "scan size", the higher the scan rate.
  
  Higher scan rates incur higher system overhead as page faults must be
  trapped and potentially data must be migrated. However, the higher the scan
  rate, the more quickly a tasks memory is migrated to a local node if the
  workload pattern changes and minimises performance impact due to remote
  memory accesses. These sysctls control the thresholds for scan delays and
  the number of pages scanned.
  
  numa_balancing_scan_period_min_ms is the minimum time in milliseconds to
  scan a tasks virtual memory. It effectively controls the maximum scanning
  rate for each task.
  
  numa_balancing_scan_delay_ms is the starting "scan delay" used for a task
  when it initially forks.
  
  numa_balancing_scan_period_max_ms is the maximum time in milliseconds to
  scan a tasks virtual memory. It effectively controls the minimum scanning
  rate for each task.
  
  numa_balancing_scan_size_mb is how many megabytes worth of pages are
  scanned for a given scan.
  
  numa_balancing_migrate_deferred is how many page migrations get skipped
  unconditionally, after a page migration is skipped because a page is shared
  with other tasks. This reduces page migration overhead, and determines
  how much stronger the "move task near its memory" policy scheduler becomes,
  versus the "move memory near its task" memory management policy, for workloads
  with shared memory.
  
  ==============================================================
  
  osrelease, ostype & version:
  
  # cat osrelease
  2.1.88
  # cat ostype
  Linux
  # cat version
  #5 Wed Feb 25 21:49:24 MET 1998
  
  The files osrelease and ostype should be clear enough. Version
  needs a little more clarification however. The '#5' means that
  this is the fifth kernel built from this source base and the
  date behind it indicates the time the kernel was built.
  The only way to tune these values is to rebuild the kernel :-)
  
  ==============================================================
  
  overflowgid & overflowuid:
  
  if your architecture did not always support 32-bit UIDs (i.e. arm,
  i386, m68k, sh, and sparc32), a fixed UID and GID will be returned to
  applications that use the old 16-bit UID/GID system calls, if the
  actual UID or GID would exceed 65535.
  
  These sysctls allow you to change the value of the fixed UID and GID.
  The default is 65534.
  
  ==============================================================
  
  panic:
  
  The value in this file represents the number of seconds the kernel
  waits before rebooting on a panic. When you use the software watchdog,
  the recommended setting is 60.
  
  ==============================================================
  
  panic_on_unrecovered_nmi:
  
  The default Linux behaviour on an NMI of either memory or unknown is
  to continue operation. For many environments such as scientific
  computing it is preferable that the box is taken out and the error
  dealt with than an uncorrected parity/ECC error get propagated.
  
  A small number of systems do generate NMI's for bizarre random reasons
  such as power management so the default is off. That sysctl works like
  the existing panic controls already in that directory.
  
  ==============================================================
  
  panic_on_oops:
  
  Controls the kernel's behaviour when an oops or BUG is encountered.
  
  0: try to continue operation
  
  1: panic immediately.  If the `panic' sysctl is also non-zero then the
     machine will be rebooted.
  
  ==============================================================
  
  panic_on_stackoverflow:
  
  Controls the kernel's behavior when detecting the overflows of
  kernel, IRQ and exception stacks except a user stack.
  This file shows up if CONFIG_DEBUG_STACKOVERFLOW is enabled.
  
  0: try to continue operation.
  
  1: panic immediately.
  
  ==============================================================
  
  perf_cpu_time_max_percent:
  
  Hints to the kernel how much CPU time it should be allowed to
  use to handle perf sampling events.  If the perf subsystem
  is informed that its samples are exceeding this limit, it
  will drop its sampling frequency to attempt to reduce its CPU
  usage.
  
  Some perf sampling happens in NMIs.  If these samples
  unexpectedly take too long to execute, the NMIs can become
  stacked up next to each other so much that nothing else is
  allowed to execute.
  
  0: disable the mechanism.  Do not monitor or correct perf's
     sampling rate no matter how CPU time it takes.
  
  1-100: attempt to throttle perf's sample rate to this
     percentage of CPU.  Note: the kernel calculates an
     "expected" length of each sample event.  100 here means
     100% of that expected length.  Even if this is set to
     100, you may still see sample throttling if this
     length is exceeded.  Set to 0 if you truly do not care
     how much CPU is consumed.
  
  ==============================================================
  
  
  pid_max:
  
  PID allocation wrap value.  When the kernel's next PID value
  reaches this value, it wraps back to a minimum PID value.
  PIDs of value pid_max or larger are not allocated.
  
  ==============================================================
  
  ns_last_pid:
  
  The last pid allocated in the current (the one task using this sysctl
  lives in) pid namespace. When selecting a pid for a next task on fork
  kernel tries to allocate a number starting from this one.
  
  ==============================================================
  
  powersave-nap: (PPC only)
  
  If set, Linux-PPC will use the 'nap' mode of powersaving,
  otherwise the 'doze' mode will be used.
  
  ==============================================================
  
  printk:
  
  The four values in printk denote: console_loglevel,
  default_message_loglevel, minimum_console_loglevel and
  default_console_loglevel respectively.
  
  These values influence printk() behavior when printing or
  logging error messages. See 'man 2 syslog' for more info on
  the different loglevels.
  
  - console_loglevel: messages with a higher priority than
    this will be printed to the console
  - default_message_loglevel: messages without an explicit priority
    will be printed with this priority
  - minimum_console_loglevel: minimum (highest) value to which
    console_loglevel can be set
  - default_console_loglevel: default value for console_loglevel
  
  ==============================================================
  
  printk_delay:
  
  Delay each printk message in printk_delay milliseconds
  
  Value from 0 - 10000 is allowed.
  
  ==============================================================
  
  printk_ratelimit:
  
  Some warning messages are rate limited. printk_ratelimit specifies
  the minimum length of time between these messages (in jiffies), by
  default we allow one every 5 seconds.
  
  A value of 0 will disable rate limiting.
  
  ==============================================================
  
  printk_ratelimit_burst:
  
  While long term we enforce one message per printk_ratelimit
  seconds, we do allow a burst of messages to pass through.
  printk_ratelimit_burst specifies the number of messages we can
  send before ratelimiting kicks in.
  
  ==============================================================
  
  randomize_va_space:
  
  This option can be used to select the type of process address
  space randomization that is used in the system, for architectures
  that support this feature.
  
  0 - Turn the process address space randomization off.  This is the
      default for architectures that do not support this feature anyways,
      and kernels that are booted with the "norandmaps" parameter.
  
  1 - Make the addresses of mmap base, stack and VDSO page randomized.
      This, among other things, implies that shared libraries will be
      loaded to random addresses.  Also for PIE-linked binaries, the
      location of code start is randomized.  This is the default if the
      CONFIG_COMPAT_BRK option is enabled.
  
  2 - Additionally enable heap randomization.  This is the default if
      CONFIG_COMPAT_BRK is disabled.
  
      There are a few legacy applications out there (such as some ancient
      versions of libc.so.5 from 1996) that assume that brk area starts
      just after the end of the code+bss.  These applications break when
      start of the brk area is randomized.  There are however no known
      non-legacy applications that would be broken this way, so for most
      systems it is safe to choose full randomization.
  
      Systems with ancient and/or broken binaries should be configured
      with CONFIG_COMPAT_BRK enabled, which excludes the heap from process
      address space randomization.
  
  ==============================================================
  
  reboot-cmd: (Sparc only)
  
  ??? This seems to be a way to give an argument to the Sparc
  ROM/Flash boot loader. Maybe to tell it what to do after
  rebooting. ???
  
  ==============================================================
  
  rtsig-max & rtsig-nr:
  
  The file rtsig-max can be used to tune the maximum number
  of POSIX realtime (queued) signals that can be outstanding
  in the system.
  
  rtsig-nr shows the number of RT signals currently queued.
  
  ==============================================================
  
  sg-big-buff:
  
  This file shows the size of the generic SCSI (sg) buffer.
  You can't tune it just yet, but you could change it on
  compile time by editing include/scsi/sg.h and changing
  the value of SG_BIG_BUFF.
  
  There shouldn't be any reason to change this value. If
  you can come up with one, you probably know what you
  are doing anyway :)
  
  ==============================================================
  
  shmall:
  
  This parameter sets the total amount of shared memory pages that
  can be used system wide. Hence, SHMALL should always be at least
  ceil(shmmax/PAGE_SIZE).
  
  If you are not sure what the default PAGE_SIZE is on your Linux
  system, you can run the following command:
  
  # getconf PAGE_SIZE
  
  ==============================================================
  
  shmmax:
  
  This value can be used to query and set the run time limit
  on the maximum shared memory segment size that can be created.
  Shared memory segments up to 1Gb are now supported in the
  kernel.  This value defaults to SHMMAX.
  
  ==============================================================
  
  shm_rmid_forced:
  
  Linux lets you set resource limits, including how much memory one
  process can consume, via setrlimit(2).  Unfortunately, shared memory
  segments are allowed to exist without association with any process, and
  thus might not be counted against any resource limits.  If enabled,
  shared memory segments are automatically destroyed when their attach
  count becomes zero after a detach or a process termination.  It will
  also destroy segments that were created, but never attached to, on exit
  from the process.  The only use left for IPC_RMID is to immediately
  destroy an unattached segment.  Of course, this breaks the way things are
  defined, so some applications might stop working.  Note that this
  feature will do you no good unless you also configure your resource
  limits (in particular, RLIMIT_AS and RLIMIT_NPROC).  Most systems don't
  need this.
  
  Note that if you change this from 0 to 1, already created segments
  without users and with a dead originative process will be destroyed.
  
  ==============================================================
  
  tainted:
  
  Non-zero if the kernel has been tainted.  Numeric values, which
  can be ORed together:
  
     1 - A module with a non-GPL license has been loaded, this
         includes modules with no license.
         Set by modutils >= 2.4.9 and module-init-tools.
     2 - A module was force loaded by insmod -f.
         Set by modutils >= 2.4.9 and module-init-tools.
     4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
     8 - A module was forcibly unloaded from the system by rmmod -f.
    16 - A hardware machine check error occurred on the system.
    32 - A bad page was discovered on the system.
    64 - The user has asked that the system be marked "tainted".  This
         could be because they are running software that directly modifies
         the hardware, or for other reasons.
   128 - The system has died.
   256 - The ACPI DSDT has been overridden with one supplied by the user
          instead of using the one provided by the hardware.
   512 - A kernel warning has occurred.
  1024 - A module from drivers/staging was loaded.
  2048 - The system is working around a severe firmware bug.
  4096 - An out-of-tree module has been loaded.
  
  ==============================================================
  
  unknown_nmi_panic:
  
  The value in this file affects behavior of handling NMI. When the
  value is non-zero, unknown NMI is trapped and then panic occurs. At
  that time, kernel debugging information is displayed on console.
  
  NMI switch that most IA32 servers have fires unknown NMI up, for
  example.  If a system hangs up, try pressing the NMI switch.
  
  ==============================================================
  
  watchdog_thresh:
  
  This value can be used to control the frequency of hrtimer and NMI
  events and the soft and hard lockup thresholds. The default threshold
  is 10 seconds.
  
  The softlockup threshold is (2 * watchdog_thresh). Setting this
  tunable to zero will disable lockup detection altogether.
  
  ==============================================================