6b13f685e
 김민수
BSP 최초 추가
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
Technologic Systems TS-4800
===========================
This document explains how to set up a basic Buildroot system for the
Technologic Systems TS-4800 System on Module.
The TS-4800 is a TS-SOCKET macrocontroller board based on the Freescale
i.MX515 ARM Cortex-A8 CPU running at 800MHz. The TS-4800 features 10/100
Ethernet, high speed USB host and device (OTG), microSD card, and 256MB
XNAND drive. More details on the board here:
http://wiki.embeddedarm.com/wiki/TS-4800
The TS-4800 is supported by mainline Linux as of 4.5 and by U-boot as of
v2016-07. The defconfig includes a custom 1st level bootloader located
in boot/ts4800-mbrboot. This one scans the SD card's partition table to
find partition having the 0xDA type, corresponding to U-boot.
To build the default configuration you only have to:
$ make ts4800_defconfig
$ make
The ouput looks like:
output/images/
├── boot.vfat
├── imx51-ts4800.dtb
├── mbrboot.bin
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
└── zImage
The provided post-image script generates an image file containing 3
partitions for U-boot, Linux kernel + device tree and rootfs
respectively:
$ fdisk output/images/sdcard.img
Device Boot Start End Blocks Id System
output/images/sdcard.img1 1 512 256 da Non-FS data
output/images/sdcard.img2 513 16896 8192 c W95 FAT32 (LBA)
output/images/sdcard.img3 16897 541184 262144 83 Linux
This image can be directly written to an SD card.
$ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0
In order to test the image on TS-4800 board, a TS baseboard, such as
TS-8xxx the serie, is needed to provide power, console header, RJ45
connector etc.
|