/*
   * (C) Copyright 2006-2008
   * Texas Instruments.
   * Richard Woodruff <r-woodruff2@ti.com>
   * Syed Mohammed Khasim <x0khasim@ti.com>
   *
   * (C) Copyright 2009
   * Frederik Kriewitz <frederik@kriewitz.eu>
   *
   * Configuration settings for the DevKit8000 board.
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  /* High Level Configuration Options */
  #define CONFIG_OMAP3_DEVKIT8000	1	/* working with DevKit8000 */
  #define CONFIG_MACH_TYPE	MACH_TYPE_DEVKIT8000
  
  /*
   * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
   * 64 bytes before this address should be set aside for u-boot.img's
   * header. That is 0x800FFFC0--0x80100000 should not be used for any
   * other needs.
   */
  #define CONFIG_SYS_TEXT_BASE	0x80100000
  
  #define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
  #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
  
  #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
  #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
  
  #define CONFIG_NAND
  
  /*  Physical Memory Map  */
  #define CONFIG_NR_DRAM_BANKS		2 /* CS1 may or may not be populated */
  
  #include <configs/ti_omap3_common.h>
  
  /* Display CPU and Board information */
  #define CONFIG_DISPLAY_CPUINFO		1
  #define CONFIG_DISPLAY_BOARDINFO	1
  
  #define CONFIG_MISC_INIT_R
  
  #define CONFIG_REVISION_TAG		1
  
  /* Size of malloc() pool */
  #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
  						/* Sector */
  #undef CONFIG_SYS_MALLOC_LEN
  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
  
  /* Hardware drivers */
  /* DM9000 */
  #define CONFIG_NET_RETRY_COUNT		20
  #define	CONFIG_DRIVER_DM9000		1
  #define	CONFIG_DM9000_BASE		0x2c000000
  #define	DM9000_IO			CONFIG_DM9000_BASE
  #define	DM9000_DATA			(CONFIG_DM9000_BASE + 0x400)
  #define	CONFIG_DM9000_USE_16BIT		1
  #define CONFIG_DM9000_NO_SROM		1
  #undef	CONFIG_DM9000_DEBUG
  
  /* SPI */
  #undef CONFIG_SPI
  #undef CONFIG_OMAP3_SPI
  
  /* I2C */
  #undef CONFIG_SYS_I2C_OMAP24XX
  #define CONFIG_SYS_I2C_OMAP34XX
  
  /* TWL4030 */
  #define CONFIG_TWL4030_LED		1
  
  /* Board NAND Info */
  #define MTDIDS_DEFAULT			"nand0=nand"
  #define MTDPARTS_DEFAULT		"mtdparts=nand:" \
  						"512k(x-loader)," \
  						"1920k(u-boot)," \
  						"128k(u-boot-env)," \
  						"4m(kernel)," \
  						"-(fs)"
  
  #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
  							/* to access nand */
  #define CONFIG_JFFS2_NAND
  /* nand device jffs2 lives on */
  #define CONFIG_JFFS2_DEV		"nand0"
  /* start of jffs2 partition */
  #define CONFIG_JFFS2_PART_OFFSET	0x680000
  #define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
  							/* partition */
  
  /* commands to include */
  #define CONFIG_CMD_DHCP			/* DHCP support			*/
  #define CONFIG_CMD_JFFS2		/* JFFS2 Support		*/
  #define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands	*/
  
  #undef CONFIG_CMD_FPGA			/* FPGA configuration Support	*/
  #undef CONFIG_CMD_IMI			/* iminfo			*/
  #undef CONFIG_CMD_SPI
  #undef CONFIG_CMD_GPIO
  #undef CONFIG_CMD_ASKENV
  #undef CONFIG_CMD_BOOTZ
  #undef CONFIG_SUPPORT_RAW_INITRD
  #undef CONFIG_FAT_WRITE
  #undef CONFIG_CMD_EXT4
  #undef CONFIG_CMD_FS_GENERIC
  
  /* BOOTP/DHCP options */
  #define CONFIG_BOOTP_SUBNETMASK
  #define CONFIG_BOOTP_GATEWAY
  #define CONFIG_BOOTP_HOSTNAME
  #define CONFIG_BOOTP_NISDOMAIN
  #define CONFIG_BOOTP_BOOTPATH
  #define CONFIG_BOOTP_BOOTFILESIZE
  #define CONFIG_BOOTP_DNS
  #define CONFIG_BOOTP_DNS2
  #define CONFIG_BOOTP_SEND_HOSTNAME
  #define CONFIG_BOOTP_NTPSERVER
  #define CONFIG_BOOTP_TIMEOFFSET
  #undef CONFIG_BOOTP_VENDOREX
  
  /* Environment information */
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"loadaddr=0x82000000\0" \
  	"console=ttyO2,115200n8\0" \
  	"mmcdev=0\0" \
  	"vram=12M\0" \
  	"dvimode=1024x768MR-16@60\0" \
  	"defaultdisplay=dvi\0" \
  	"nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \
  	"kernelopts=rw\0" \
  	"commonargs=" \
  		"setenv bootargs console=${console} " \
  		"vram=${vram} " \
  		"omapfb.mode=dvi:${dvimode} " \
  		"omapdss.def_disp=${defaultdisplay}\0" \
  	"mmcargs=" \
  		"run commonargs; " \
  		"setenv bootargs ${bootargs} " \
  		"root=/dev/mmcblk0p2 " \
  		"rootwait " \
  		"${kernelopts}\0" \
  	"nandargs=" \
  		"run commonargs; " \
  		"setenv bootargs ${bootargs} " \
  		"omapfb.mode=dvi:${dvimode} " \
  		"omapdss.def_disp=${defaultdisplay} " \
  		"root=/dev/mtdblock4 " \
  		"rootfstype=jffs2 " \
  		"${kernelopts}\0" \
  	"netargs=" \
  		"run commonargs; " \
  		"setenv bootargs ${bootargs} " \
  		"root=/dev/nfs " \
  		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
  		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \
  		"${kernelopts} " \
  		"dnsip1=${dnsip} " \
  		"dnsip2=${dnsip2}\0" \
  	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
  	"bootscript=echo Running bootscript from mmc ...; " \
  		"source ${loadaddr}\0" \
  	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
  	"eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
  	"mmcboot=echo Booting from mmc ...; " \
  		"run mmcargs; " \
  		"bootm ${loadaddr}\0" \
  	"nandboot=echo Booting from nand ...; " \
  		"run nandargs; " \
  		"nand read ${loadaddr} 280000 400000; " \
  		"bootm ${loadaddr}\0" \
  	"netboot=echo Booting from network ...; " \
  		"dhcp ${loadaddr}; " \
  		"run netargs; " \
  		"bootm ${loadaddr}\0" \
  	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
  			"if run loadbootscript; then " \
  				"run bootscript; " \
  			"else " \
  				"if run loaduimage; then " \
  					"run mmcboot; " \
  				"else run nandboot; " \
  				"fi; " \
  			"fi; " \
  		"else run nandboot; fi\0"
  
  
  #define CONFIG_BOOTCOMMAND "run autoboot"
  
  /* Boot Argument Buffer Size */
  #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x07000000)
  #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
  					0x01000000) /* 16MB */
  
  /* NAND and environment organization  */
  #define CONFIG_ENV_IS_IN_NAND		1
  #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
  
  #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
  
  /* SRAM config */
  #define CONFIG_SYS_SRAM_START              0x40200000
  #define CONFIG_SYS_SRAM_SIZE               0x10000
  
  /* Defines for SPL */
  #undef CONFIG_SPL_MTD_SUPPORT
  
  #undef CONFIG_SPL_TEXT_BASE
  #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
  
  /* NAND boot config */
  #define CONFIG_SYS_NAND_BUSWIDTH_16BIT	16
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_PAGE_COUNT	64
  #define CONFIG_SYS_NAND_PAGE_SIZE	2048
  #define CONFIG_SYS_NAND_OOBSIZE		64
  #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
  #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
  #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
  						10, 11, 12, 13}
  
  #define CONFIG_SYS_NAND_ECCSIZE		512
  #define CONFIG_SYS_NAND_ECCBYTES	3
  #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
  
  #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
  #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
  
  /* SPL OS boot options */
  #define CONFIG_CMD_SPL_WRITE_SIZE       0x400 /* 1024 byte */
  #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
  					0x400000)
  #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
  
  #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
  #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
  #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
  #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
  #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
  #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */
  
  #undef CONFIG_SYS_SPL_ARGS_ADDR
  #define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
  
  #endif /* __CONFIG_H */