/*
   * Zalon 53c7xx device driver.
   * By Richard Hirst (rhirst@linuxcare.com)
   */
  
  #include <linux/init.h>
  #include <linux/interrupt.h>
  #include <linux/module.h>
  #include <linux/types.h>
  #include <asm/hardware.h>
  #include <asm/io.h>
  
  #include "../parisc/gsc.h"
  
  #include "ncr53c8xx.h"
  
  MODULE_AUTHOR("Richard Hirst");
  MODULE_DESCRIPTION("Bluefish/Zalon 720 SCSI Driver");
  MODULE_LICENSE("GPL");
  
  #define GSC_SCSI_ZALON_OFFSET 0x800
  
  #define IO_MODULE_EIM		(1*4)
  #define IO_MODULE_DC_ADATA	(2*4)
  #define IO_MODULE_II_CDATA	(3*4)
  #define IO_MODULE_IO_COMMAND	(12*4)
  #define IO_MODULE_IO_STATUS	(13*4)
  
  #define IOSTATUS_RY		0x40
  #define IOSTATUS_FE		0x80
  #define IOIIDATA_SMINT5L	0x40000000
  #define IOIIDATA_MINT5EN	0x20000000
  #define IOIIDATA_PACKEN		0x10000000
  #define IOIIDATA_PREFETCHEN	0x08000000
  #define IOIIDATA_IOII		0x00000020
  
  #define CMD_RESET		5
  
  static struct ncr_chip zalon720_chip __initdata = {
  	.revision_id =	0x0f,
  	.burst_max =	3,
  	.offset_max =	8,
  	.nr_divisor =	4,
  	.features =	FE_WIDE | FE_DIFF | FE_EHP| FE_MUX | FE_EA,
  };
  
  
  
  #if 0
  /* FIXME:
   * Is this function dead code? or is someone planning on using it in the
   * future.  The clock = (int) pdc_result[16] does not look correct to
   * me ... I think it should be iodc_data[16].  Since this cause a compile
   * error with the new encapsulated PDC, I'm not compiling in this function.
   * - RB
   */
  /* poke SCSI clock out of iodc data */
  
  static u8 iodc_data[32] __attribute__ ((aligned (64)));
  static unsigned long pdc_result[32] __attribute__ ((aligned (16))) ={0,0,0,0};
  
  static int 
  lasi_scsi_clock(void * hpa, int defaultclock)
  {
  	int clock, status;
  
  	status = pdc_iodc_read(&pdc_result, hpa, 0, &iodc_data, 32 );
  	if (status == PDC_RET_OK) {
  		clock = (int) pdc_result[16];
  	} else {
  		printk(KERN_WARNING "%s: pdc_iodc_read returned %d
  ", __func__, status);
  		clock = defaultclock; 
  	}
  
  	printk(KERN_DEBUG "%s: SCSI clock %d
  ", __func__, clock);
   	return clock;
  }
  #endif
  
  static struct scsi_host_template zalon7xx_template = {
  	.module		= THIS_MODULE,
  	.proc_name	= "zalon7xx",
  };
  
  static int __init
  zalon_probe(struct parisc_device *dev)
  {
  	struct gsc_irq gsc_irq;
  	u32 zalon_vers;
  	int error = -ENODEV;
  	void __iomem *zalon = ioremap_nocache(dev->hpa.start, 4096);
  	void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
  	static int unit = 0;
  	struct Scsi_Host *host;
  	struct ncr_device device;
  
  	__raw_writel(CMD_RESET, zalon + IO_MODULE_IO_COMMAND);
  	while (!(__raw_readl(zalon + IO_MODULE_IO_STATUS) & IOSTATUS_RY))
  		cpu_relax();
  	__raw_writel(IOIIDATA_MINT5EN | IOIIDATA_PACKEN | IOIIDATA_PREFETCHEN,
  		zalon + IO_MODULE_II_CDATA);
  
  	/* XXX: Save the Zalon version for bug workarounds? */
  	zalon_vers = (__raw_readl(zalon + IO_MODULE_II_CDATA) >> 24) & 0x07;
  
  	/* Setup the interrupts first.
  	** Later on request_irq() will register the handler.
  	*/
  	dev->irq = gsc_alloc_irq(&gsc_irq);
  
  	printk(KERN_INFO "%s: Zalon version %d, IRQ %d
  ", __func__,
  		zalon_vers, dev->irq);
  
  	__raw_writel(gsc_irq.txn_addr | gsc_irq.txn_data, zalon + IO_MODULE_EIM);
  
  	if (zalon_vers == 0)
  		printk(KERN_WARNING "%s: Zalon 1.1 or earlier
  ", __func__);
  
  	memset(&device, 0, sizeof(struct ncr_device));
  
  	/* The following three are needed before any other access. */
  	__raw_writeb(0x20, io_port + 0x38); /* DCNTL_REG,  EA  */
  	__raw_writeb(0x04, io_port + 0x1b); /* CTEST0_REG, EHP */
  	__raw_writeb(0x80, io_port + 0x22); /* CTEST4_REG, MUX */
  
  	/* Initialise ncr_device structure with items required by ncr_attach. */
  	device.chip		= zalon720_chip;
  	device.host_id		= 7;
  	device.dev		= &dev->dev;
  	device.slot.base	= dev->hpa.start + GSC_SCSI_ZALON_OFFSET;
  	device.slot.base_v	= io_port;
  	device.slot.irq		= dev->irq;
  	device.differential	= 2;
  
  	host = ncr_attach(&zalon7xx_template, unit, &device);
  	if (!host)
  		return -ENODEV;
  
  	if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
  	  dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching
   ",
  		     dev->irq);
  		goto fail;
  	}
  
  	unit++;
  
  	dev_set_drvdata(&dev->dev, host);
  
  	error = scsi_add_host(host, &dev->dev);
  	if (error)
  		goto fail_free_irq;
  
  	scsi_scan_host(host);
  	return 0;
  
   fail_free_irq:
  	free_irq(dev->irq, host);
   fail:
  	ncr53c8xx_release(host);
  	return error;
  }
  
  static struct parisc_device_id zalon_tbl[] = {
  	{ HPHW_A_DMA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00089 }, 
  	{ 0, }
  };
  
  MODULE_DEVICE_TABLE(parisc, zalon_tbl);
  
  static int __exit zalon_remove(struct parisc_device *dev)
  {
  	struct Scsi_Host *host = dev_get_drvdata(&dev->dev);
  
  	scsi_remove_host(host);
  	ncr53c8xx_release(host);
  	free_irq(dev->irq, host);
  
  	return 0;
  }
  
  static struct parisc_driver zalon_driver = {
  	.name =		"zalon",
  	.id_table =	zalon_tbl,
  	.probe =	zalon_probe,
  	.remove =	zalon_remove,
  };
  
  static int __init zalon7xx_init(void)
  {
  	int ret = ncr53c8xx_init();
  	if (!ret)
  		ret = register_parisc_driver(&zalon_driver);
  	if (ret)
  		ncr53c8xx_exit();
  	return ret;
  }
  
  static void __exit zalon7xx_exit(void)
  {
  	unregister_parisc_driver(&zalon_driver);
  	ncr53c8xx_exit();
  }
  
  module_init(zalon7xx_init);
  module_exit(zalon7xx_exit);