/*
   * linux/drivers/pcmcia/soc_common.h
   *
   * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
   *
   * This file contains definitions for the PCMCIA support code common to
   * integrated SOCs like the SA-11x0 and PXA2xx microprocessors.
   */
  #ifndef _ASM_ARCH_PCMCIA
  #define _ASM_ARCH_PCMCIA
  
  /* include the world */
  #include <linux/clk.h>
  #include <linux/cpufreq.h>
  #include <pcmcia/ss.h>
  #include <pcmcia/cistpl.h>
  
  
  struct device;
  struct pcmcia_low_level;
  
  /*
   * This structure encapsulates per-socket state which we might need to
   * use when responding to a Card Services query of some kind.
   */
  struct soc_pcmcia_socket {
  	struct pcmcia_socket	socket;
  
  	/*
  	 * Info from low level handler
  	 */
  	unsigned int		nr;
  	struct clk		*clk;
  
  	/*
  	 * Core PCMCIA state
  	 */
  	const struct pcmcia_low_level *ops;
  
  	unsigned int		status;
  	socket_state_t		cs_state;
  
  	unsigned short		spd_io[MAX_IO_WIN];
  	unsigned short		spd_mem[MAX_WIN];
  	unsigned short		spd_attr[MAX_WIN];
  
  	struct resource		res_skt;
  	struct resource		res_io;
  	struct resource		res_mem;
  	struct resource		res_attr;
  	void __iomem		*virt_io;
  
  	struct {
  		int		gpio;
  		unsigned int	irq;
  		const char	*name;
  	} stat[4];
  #define SOC_STAT_CD		0	/* Card detect */
  #define SOC_STAT_BVD1		1	/* BATDEAD / IOSTSCHG */
  #define SOC_STAT_BVD2		2	/* BATWARN / IOSPKR */
  #define SOC_STAT_RDY		3	/* Ready / Interrupt */
  
  	unsigned int		irq_state;
  
  	struct timer_list	poll_timer;
  	struct list_head	node;
  };
  
  struct skt_dev_info {
  	int nskt;
  	struct clk *clk;
  	struct soc_pcmcia_socket skt[0];
  };
  
  struct pcmcia_state {
    unsigned detect: 1,
              ready: 1,
               bvd1: 1,
               bvd2: 1,
             wrprot: 1,
              vs_3v: 1,
              vs_Xv: 1;
  };
  
  struct pcmcia_low_level {
  	struct module *owner;
  
  	/* first socket in system */
  	int first;
  	/* nr of sockets */
  	int nr;
  
  	int (*hw_init)(struct soc_pcmcia_socket *);
  	void (*hw_shutdown)(struct soc_pcmcia_socket *);
  
  	void (*socket_state)(struct soc_pcmcia_socket *, struct pcmcia_state *);
  	int (*configure_socket)(struct soc_pcmcia_socket *, const socket_state_t *);
  
  	/*
  	 * Enable card status IRQs on (re-)initialisation.  This can
  	 * be called at initialisation, power management event, or
  	 * pcmcia event.
  	 */
  	void (*socket_init)(struct soc_pcmcia_socket *);
  
  	/*
  	 * Disable card status IRQs and PCMCIA bus on suspend.
  	 */
  	void (*socket_suspend)(struct soc_pcmcia_socket *);
  
  	/*
  	 * Hardware specific timing routines.
  	 * If provided, the get_timing routine overrides the SOC default.
  	 */
  	unsigned int (*get_timing)(struct soc_pcmcia_socket *, unsigned int, unsigned int);
  	int (*set_timing)(struct soc_pcmcia_socket *);
  	int (*show_timing)(struct soc_pcmcia_socket *, char *);
  
  #ifdef CONFIG_CPU_FREQ
  	/*
  	 * CPUFREQ support.
  	 */
  	int (*frequency_change)(struct soc_pcmcia_socket *, unsigned long, struct cpufreq_freqs *);
  #endif
  };
  
  
  struct soc_pcmcia_timing {
  	unsigned short io;
  	unsigned short mem;
  	unsigned short attr;
  };
  
  extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_pcmcia_timing *);
  
  void soc_pcmcia_init_one(struct soc_pcmcia_socket *skt,
  	struct pcmcia_low_level *ops, struct device *dev);
  void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt);
  int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt);
  
  
  #ifdef CONFIG_PCMCIA_DEBUG
  
  extern void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
  			     int lvl, const char *fmt, ...);
  
  #define debug(skt, lvl, fmt, arg...) \
  	soc_pcmcia_debug(skt, __func__, lvl, fmt , ## arg)
  
  #else
  #define debug(skt, lvl, fmt, arg...) do { } while (0)
  #endif
  
  
  /*
   * The PC Card Standard, Release 7, section 4.13.4, says that twIORD
   * has a minimum value of 165ns. Section 4.13.5 says that twIOWR has
   * a minimum value of 165ns, as well. Section 4.7.2 (describing
   * common and attribute memory write timing) says that twWE has a
   * minimum value of 150ns for a 250ns cycle time (for 5V operation;
   * see section 4.7.4), or 300ns for a 600ns cycle time (for 3.3V
   * operation, also section 4.7.4). Section 4.7.3 says that taOE
   * has a maximum value of 150ns for a 300ns cycle time (for 5V
   * operation), or 300ns for a 600ns cycle time (for 3.3V operation).
   *
   * When configuring memory maps, Card Services appears to adopt the policy
   * that a memory access time of "0" means "use the default." The default
   * PCMCIA I/O command width time is 165ns. The default PCMCIA 5V attribute
   * and memory command width time is 150ns; the PCMCIA 3.3V attribute and
   * memory command width time is 300ns.
   */
  #define SOC_PCMCIA_IO_ACCESS		(165)
  #define SOC_PCMCIA_5V_MEM_ACCESS	(150)
  #define SOC_PCMCIA_3V_MEM_ACCESS	(300)
  #define SOC_PCMCIA_ATTR_MEM_ACCESS	(300)
  
  /*
   * The socket driver actually works nicely in interrupt-driven form,
   * so the (relatively infrequent) polling is "just to be sure."
   */
  #define SOC_PCMCIA_POLL_PERIOD    (2*HZ)
  
  
  /* I/O pins replacing memory pins
   * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
   *
   * These signals change meaning when going from memory-only to
   * memory-or-I/O interface:
   */
  #define iostschg bvd1
  #define iospkr   bvd2
  
  #endif