/* atmdev.h - ATM device driver declarations and various related items */
  #ifndef LINUX_ATMDEV_H
  #define LINUX_ATMDEV_H
  
  
  #include <linux/wait.h> /* wait_queue_head_t */
  #include <linux/time.h> /* struct timeval */
  #include <linux/net.h>
  #include <linux/bug.h>
  #include <linux/skbuff.h> /* struct sk_buff */
  #include <linux/uio.h>
  #include <net/sock.h>
  #include <linux/atomic.h>
  #include <uapi/linux/atmdev.h>
  
  #ifdef CONFIG_PROC_FS
  #include <linux/proc_fs.h>
  
  extern struct proc_dir_entry *atm_proc_root;
  #endif
  
  #ifdef CONFIG_COMPAT
  #include <linux/compat.h>
  struct compat_atm_iobuf {
  	int length;
  	compat_uptr_t buffer;
  };
  #endif
  
  struct k_atm_aal_stats {
  #define __HANDLE_ITEM(i) atomic_t i
  	__AAL_STAT_ITEMS
  #undef __HANDLE_ITEM
  };
  
  
  struct k_atm_dev_stats {
  	struct k_atm_aal_stats aal0;
  	struct k_atm_aal_stats aal34;
  	struct k_atm_aal_stats aal5;
  };
  
  struct device;
  
  enum {
  	ATM_VF_ADDR,		/* Address is in use. Set by anybody, cleared
  				   by device driver. */
  	ATM_VF_READY,		/* VC is ready to transfer data. Set by device
  				   driver, cleared by anybody. */
  	ATM_VF_PARTIAL,		/* resources are bound to PVC (partial PVC
  				   setup), controlled by socket layer */
  	ATM_VF_REGIS,		/* registered with demon, controlled by SVC
  				   socket layer */
  	ATM_VF_BOUND,		/* local SAP is set, controlled by SVC socket
  				   layer */
  	ATM_VF_RELEASED,	/* demon has indicated/requested release,
  				   controlled by SVC socket layer */
  	ATM_VF_HASQOS,		/* QOS parameters have been set */
  	ATM_VF_LISTEN,		/* socket is used for listening */
  	ATM_VF_META,		/* SVC socket isn't used for normal data
  				   traffic and doesn't depend on signaling
  				   to be available */
  	ATM_VF_SESSION,		/* VCC is p2mp session control descriptor */
  	ATM_VF_HASSAP,		/* SAP has been set */
  	ATM_VF_CLOSE,		/* asynchronous close - treat like VF_RELEASED*/
  	ATM_VF_WAITING,		/* waiting for reply from sigd */
  	ATM_VF_IS_CLIP,		/* in use by CLIP protocol */
  };
  
  
  #define ATM_VF2VS(flags) \
      (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
       test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
       test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
       test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
       test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
  
  
  enum {
  	ATM_DF_REMOVED,		/* device was removed from atm_devs list */
  };
  
  
  #define ATM_PHY_SIG_LOST    0	/* no carrier/light */
  #define ATM_PHY_SIG_UNKNOWN 1	/* carrier/light status is unknown */
  #define ATM_PHY_SIG_FOUND   2	/* carrier/light okay */
  
  #define ATM_ATMOPT_CLP	1	/* set CLP bit */
  
  struct atm_vcc {
  	/* struct sock has to be the first member of atm_vcc */
  	struct sock	sk;
  	unsigned long	flags;		/* VCC flags (ATM_VF_*) */
  	short		vpi;		/* VPI and VCI (types must be equal */
  					/* with sockaddr) */
  	int 		vci;
  	unsigned long	aal_options;	/* AAL layer options */
  	unsigned long	atm_options;	/* ATM layer options */
  	struct atm_dev	*dev;		/* device back pointer */
  	struct atm_qos	qos;		/* QOS */
  	struct atm_sap	sap;		/* SAP */
  	void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */
  	void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
  	void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
  	int (*push_oam)(struct atm_vcc *vcc,void *cell);
  	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
  	void		*dev_data;	/* per-device data */
  	void		*proto_data;	/* per-protocol data */
  	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
  	struct module *owner;		/* owner of ->push function */
  	/* SVC part --- may move later ------------------------------------- */
  	short		itf;		/* interface number */
  	struct sockaddr_atmsvc local;
  	struct sockaddr_atmsvc remote;
  	/* Multipoint part ------------------------------------------------- */
  	struct atm_vcc	*session;	/* session VCC descriptor */
  	/* Other stuff ----------------------------------------------------- */
  	void		*user_back;	/* user backlink - not touched by */
  					/* native ATM stack. Currently used */
  					/* by CLIP and sch_atm. */
  };
  
  static inline struct atm_vcc *atm_sk(struct sock *sk)
  {
  	return (struct atm_vcc *)sk;
  }
  
  static inline struct atm_vcc *ATM_SD(struct socket *sock)
  {
  	return atm_sk(sock->sk);
  }
  
  static inline struct sock *sk_atm(struct atm_vcc *vcc)
  {
  	return (struct sock *)vcc;
  }
  
  struct atm_dev_addr {
  	struct sockaddr_atmsvc addr;	/* ATM address */
  	struct list_head entry;		/* next address */
  };
  
  enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
  
  struct atm_dev {
  	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
  	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
  					/* (NULL) */
  	const char	*type;		/* device type name */
  	int		number;		/* device index */
  	void		*dev_data;	/* per-device data */
  	void		*phy_data;	/* private PHY date */
  	unsigned long	flags;		/* device flags (ATM_DF_*) */
  	struct list_head local;		/* local ATM addresses */
  	struct list_head lecs;		/* LECS ATM addresses learned via ILMI */
  	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
  	struct atm_cirange ci_range;	/* VPI/VCI range */
  	struct k_atm_dev_stats stats;	/* statistics */
  	char		signal;		/* signal status (ATM_PHY_SIG_*) */
  	int		link_rate;	/* link rate (default: OC3) */
  	atomic_t	refcnt;		/* reference count */
  	spinlock_t	lock;		/* protect internal members */
  #ifdef CONFIG_PROC_FS
  	struct proc_dir_entry *proc_entry; /* proc entry */
  	char *proc_name;		/* proc entry name */
  #endif
  	struct device class_dev;	/* sysfs device */
  	struct list_head dev_list;	/* linkage */
  };
  
   
  /* OF: send_Oam Flags */
  
  #define ATM_OF_IMMED  1		/* Attempt immediate delivery */
  #define ATM_OF_INRATE 2		/* Attempt in-rate delivery */
  
  
  /*
   * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
   */
  
  struct atmdev_ops { /* only send is required */
  	void (*dev_close)(struct atm_dev *dev);
  	int (*open)(struct atm_vcc *vcc);
  	void (*close)(struct atm_vcc *vcc);
  	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
  #ifdef CONFIG_COMPAT
  	int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
  			    void __user *arg);
  #endif
  	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
  	    void __user *optval,int optlen);
  	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
  	    void __user *optval,unsigned int optlen);
  	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
  	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
  	void (*phy_put)(struct atm_dev *dev,unsigned char value,
  	    unsigned long addr);
  	unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
  	int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
  	int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
  	struct module *owner;
  };
  
  struct atmphy_ops {
  	int (*start)(struct atm_dev *dev);
  	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
  	void (*interrupt)(struct atm_dev *dev);
  	int (*stop)(struct atm_dev *dev);
  };
  
  struct atm_skb_data {
  	struct atm_vcc	*vcc;		/* ATM VCC */
  	unsigned long	atm_options;	/* ATM layer options */
  };
  
  #define VCC_HTABLE_SIZE 32
  
  extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
  extern rwlock_t vcc_sklist_lock;
  
  #define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
  
  struct atm_dev *atm_dev_register(const char *type, struct device *parent,
  				 const struct atmdev_ops *ops,
  				 int number, /* -1 == pick first available */
  				 unsigned long *flags);
  struct atm_dev *atm_dev_lookup(int number);
  void atm_dev_deregister(struct atm_dev *dev);
  
  /* atm_dev_signal_change
   *
   * Propagate lower layer signal change in atm_dev->signal to netdevice.
   * The event will be sent via a notifier call chain.
   */
  void atm_dev_signal_change(struct atm_dev *dev, char signal);
  
  void vcc_insert_socket(struct sock *sk);
  
  void atm_dev_release_vccs(struct atm_dev *dev);
  
  
  static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
  {
  	atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
  }
  
  
  static inline void atm_return(struct atm_vcc *vcc,int truesize)
  {
  	atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
  }
  
  
  static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
  {
  	return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
  	       sk_atm(vcc)->sk_sndbuf;
  }
  
  
  static inline void atm_dev_hold(struct atm_dev *dev)
  {
  	atomic_inc(&dev->refcnt);
  }
  
  
  static inline void atm_dev_put(struct atm_dev *dev)
  {
  	if (atomic_dec_and_test(&dev->refcnt)) {
  		BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
  		if (dev->ops->dev_close)
  			dev->ops->dev_close(dev);
  		put_device(&dev->class_dev);
  	}
  }
  
  
  int atm_charge(struct atm_vcc *vcc,int truesize);
  struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
      gfp_t gfp_flags);
  int atm_pcr_goal(const struct atm_trafprm *tp);
  
  void vcc_release_async(struct atm_vcc *vcc, int reply);
  
  struct atm_ioctl {
  	struct module *owner;
  	/* A module reference is kept if appropriate over this call.
  	 * Return -ENOIOCTLCMD if you don't handle it. */
  	int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
  	struct list_head list;
  };
  
  /**
   * register_atm_ioctl - register handler for ioctl operations
   *
   * Special (non-device) handlers of ioctl's should
   * register here. If you're a normal device, you should
   * set .ioctl in your atmdev_ops instead.
   */
  void register_atm_ioctl(struct atm_ioctl *);
  
  /**
   * deregister_atm_ioctl - remove the ioctl handler
   */
  void deregister_atm_ioctl(struct atm_ioctl *);
  
  
  /* register_atmdevice_notifier - register atm_dev notify events
   *
   * Clients like br2684 will register notify events
   * Currently we notify of signal found/lost
   */
  int register_atmdevice_notifier(struct notifier_block *nb);
  void unregister_atmdevice_notifier(struct notifier_block *nb);
  
  #endif