#
  # Watchdog device configuration
  #
  
  menuconfig WATCHDOG
  	bool "Watchdog Timer Support"
  	---help---
  	  If you say Y here (and to one of the following options) and create a
  	  character special file /dev/watchdog with major number 10 and minor
  	  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
  	  subsequently opening the file and then failing to write to it for
  	  longer than 1 minute will result in rebooting the machine. This
  	  could be useful for a networked machine that needs to come back
  	  on-line as fast as possible after a lock-up. There's both a watchdog
  	  implementation entirely in software (which can sometimes fail to
  	  reboot the machine) and a driver for hardware watchdog boards, which
  	  are more robust and can also keep track of the temperature inside
  	  your computer. For details, read
  	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
  
  	  The watchdog is usually used together with the watchdog daemon
  	  which is available from
  	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
  	  also monitor NFS connections and can reboot the machine when the process
  	  table is full.
  
  	  If unsure, say N.
  
  if WATCHDOG
  
  config WATCHDOG_CORE
  	bool "WatchDog Timer Driver Core"
  	---help---
  	  Say Y here if you want to use the new watchdog timer driver core.
  	  This driver provides a framework for all watchdog timer drivers
  	  and gives them the /dev/watchdog interface (and later also the
  	  sysfs interface).
  
  config WATCHDOG_NOWAYOUT
  	bool "Disable watchdog shutdown on close"
  	help
  	  The default watchdog behaviour (which you get if you say N here) is
  	  to stop the timer if the process managing it closes the file
  	  /dev/watchdog. It's always remotely possible that this process might
  	  get killed. If you say Y here, the watchdog cannot be stopped once
  	  it has been started.
  
  #
  # General Watchdog drivers
  #
  
  comment "Watchdog Device Drivers"
  
  # Architecture Independent
  
  config SOFT_WATCHDOG
  	tristate "Software watchdog"
  	select WATCHDOG_CORE
  	help
  	  A software monitoring watchdog. This will fail to reboot your system
  	  from some situations that the hardware watchdog will recover
  	  from. Equally it's a lot cheaper to install.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called softdog.
  
  config DA9052_WATCHDOG
          tristate "Dialog DA9052 Watchdog"
          depends on PMIC_DA9052
          select WATCHDOG_CORE
          help
            Support for the watchdog in the DA9052 PMIC. Watchdog trigger
            cause system reset.
  
            Say Y here to include support for the DA9052 watchdog.
            Alternatively say M to compile the driver as a module,
            which will be called da9052_wdt.
  
  config DA9055_WATCHDOG
  	tristate "Dialog Semiconductor DA9055 Watchdog"
  	depends on MFD_DA9055
  	select WATCHDOG_CORE
  	help
  	  If you say yes here you get support for watchdog on the Dialog
  	  Semiconductor DA9055 PMIC.
  
  	  This driver can also be built as a module.  If so, the module
  	  will be called da9055_wdt.
  
  config GPIO_WATCHDOG
  	tristate "Watchdog device controlled through GPIO-line"
  	depends on OF_GPIO
  	select WATCHDOG_CORE
  	help
  	  If you say yes here you get support for watchdog device
  	  controlled through GPIO-line.
  
  config WM831X_WATCHDOG
  	tristate "WM831x watchdog"
  	depends on MFD_WM831X
  	select WATCHDOG_CORE
  	help
  	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
  	  the watchdog triggers the system will be reset.
  
  config WM8350_WATCHDOG
  	tristate "WM8350 watchdog"
  	depends on MFD_WM8350
  	select WATCHDOG_CORE
  	help
  	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
  	  the watchdog triggers the system will be reset.
  
  # ALPHA Architecture
  
  # ARM Architecture
  
  config ARM_SP805_WATCHDOG
  	tristate "ARM SP805 Watchdog"
  	depends on (ARM || ARM64) && ARM_AMBA
  	select WATCHDOG_CORE
  	help
  	  ARM Primecell SP805 Watchdog timer. This will reboot your system when
  	  the timeout is reached.
  
  config AT91RM9200_WATCHDOG
  	tristate "AT91RM9200 watchdog"
  	depends on ARCH_AT91RM9200
  	help
  	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
  	  system when the timeout is reached.
  
  config AT91SAM9X_WATCHDOG
  	tristate "AT91SAM9X / AT91CAP9 watchdog"
  	depends on ARCH_AT91 && !ARCH_AT91RM9200
  	select WATCHDOG_CORE
  	help
  	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
  	  reboot your system when the timeout is reached.
  
  config 21285_WATCHDOG
  	tristate "DC21285 watchdog"
  	depends on FOOTBRIDGE
  	help
  	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
  	  here if you wish to use this. Alternatively say M to compile the
  	  driver as a module, which will be called wdt285.
  
  	  This driver does not work on all machines. In particular, early CATS
  	  boards have hardware problems that will cause the machine to simply
  	  lock up if the watchdog fires.
  
  	  "If in doubt, leave it out" - say N.
  
  config 977_WATCHDOG
  	tristate "NetWinder WB83C977 watchdog"
  	depends on FOOTBRIDGE && ARCH_NETWINDER
  	help
  	  Say Y here to include support for the WB977 watchdog included in
  	  NetWinder machines. Alternatively say M to compile the driver as
  	  a module, which will be called wdt977.
  
  	  Not sure? It's safe to say N.
  
  config IXP4XX_WATCHDOG
  	tristate "IXP4xx Watchdog"
  	depends on ARCH_IXP4XX
  	help
  	  Say Y here if to include support for the watchdog timer
  	  in the Intel IXP4xx network processors. This driver can
  	  be built as a module by choosing M. The module will
  	  be called ixp4xx_wdt.
  
  	  Note: The internal IXP4xx watchdog does a soft CPU reset
  	  which doesn't reset any peripherals. There are circumstances
  	  where the watchdog will fail to reset the board correctly
  	  (e.g., if the boot ROM is in an unreadable state).
  
  	  Say N if you are unsure.
  
  config KS8695_WATCHDOG
  	tristate "KS8695 watchdog"
  	depends on ARCH_KS8695
  	help
  	  Watchdog timer embedded into KS8695 processor. This will reboot your
  	  system when the timeout is reached.
  
  config HAVE_S3C2410_WATCHDOG
  	bool
  	help
  	  This will include watchdog timer support for Samsung SoCs. If
  	  you want to include watchdog support for any machine, kindly
  	  select this in the respective mach-XXXX/Kconfig file.
  
  config S3C2410_WATCHDOG
  	tristate "S3C2410 Watchdog"
  	depends on HAVE_S3C2410_WATCHDOG
  	select WATCHDOG_CORE
  	select MFD_SYSCON if ARCH_EXYNOS5
  	help
  	  Watchdog timer block in the Samsung SoCs. This will reboot
  	  the system when the timer expires with the watchdog enabled.
  
  	  The driver is limited by the speed of the system's PCLK
  	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
  	  then watchdog intervals of over approximately 20seconds are
  	  unavailable.
  
  	  The driver can be built as a module by choosing M, and will
  	  be called s3c2410_wdt
  
  config SA1100_WATCHDOG
  	tristate "SA1100/PXA2xx watchdog"
  	depends on ARCH_SA1100 || ARCH_PXA
  	help
  	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
  	  reboot your system when timeout is reached.
  
  	  NOTE: once enabled, this timer cannot be disabled.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sa1100_wdt.
  
  config DW_WATCHDOG
  	tristate "Synopsys DesignWare watchdog"
  	depends on HAS_IOMEM
  	help
  	  Say Y here if to include support for the Synopsys DesignWare
  	  watchdog timer found in many chips.
  	  To compile this driver as a module, choose M here: the
  	  module will be called dw_wdt.
  
  config EP93XX_WATCHDOG
  	tristate "EP93xx Watchdog"
  	depends on ARCH_EP93XX
  	select WATCHDOG_CORE
  	help
  	  Say Y here if to include support for the watchdog timer
  	  embedded in the Cirrus Logic EP93xx family of devices.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ep93xx_wdt.
  
  config OMAP_WATCHDOG
  	tristate "OMAP Watchdog"
  	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
  	select WATCHDOG_CORE
  	help
  	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
  	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
  
  config PNX4008_WATCHDOG
  	tristate "LPC32XX Watchdog"
  	depends on ARCH_LPC32XX
  	select WATCHDOG_CORE
  	help
  	  Say Y here if to include support for the watchdog timer
  	  in the LPC32XX processor.
  	  This driver can be built as a module by choosing M. The module
  	  will be called pnx4008_wdt.
  
  	  Say N if you are unsure.
  
  config IOP_WATCHDOG
  	tristate "IOP Watchdog"
  	depends on PLAT_IOP
  	select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
  	help
  	  Say Y here if to include support for the watchdog timer
  	  in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
  	  be built as a module by choosing M. The module will
  	  be called iop_wdt.
  
  	  Note: The IOP13XX watchdog does an Internal Bus Reset which will
  	  affect both cores and the peripherals of the IOP.  The ATU-X
  	  and/or ATUe configuration registers will remain intact, but if
  	  operating as an Root Complex and/or Central Resource, the PCI-X
  	  and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
  
  config DAVINCI_WATCHDOG
  	tristate "DaVinci watchdog"
  	depends on ARCH_DAVINCI || ARCH_KEYSTONE
  	select WATCHDOG_CORE
  	help
  	  Say Y here if to include support for the watchdog timer
  	  in the DaVinci DM644x/DM646x or Keystone processors.
  	  To compile this driver as a module, choose M here: the
  	  module will be called davinci_wdt.
  
  	  NOTE: once enabled, this timer cannot be disabled.
  	  Say N if you are unsure.
  
  config ORION_WATCHDOG
  	tristate "Orion watchdog"
  	depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE
  	select WATCHDOG_CORE
  	help
  	  Say Y here if to include support for the watchdog timer
  	  in the Marvell Orion5x and Kirkwood ARM SoCs.
  	  To compile this driver as a module, choose M here: the
  	  module will be called orion_wdt.
  
  config SUNXI_WATCHDOG
  	tristate "Allwinner SoCs watchdog support"
  	depends on ARCH_SUNXI
  	select WATCHDOG_CORE
  	help
  	  Say Y here to include support for the watchdog timer
  	  in Allwinner SoCs.
  	  To compile this driver as a module, choose M here: the
  	  module will be called sunxi_wdt.
  
  config COH901327_WATCHDOG
  	bool "ST-Ericsson COH 901 327 watchdog"
  	depends on ARCH_U300
  	default y if MACH_U300
  	select WATCHDOG_CORE
  	help
  	  Say Y here to include Watchdog timer support for the
  	  watchdog embedded into the ST-Ericsson U300 series platforms.
  	  This watchdog is used to reset the system and thus cannot be
  	  compiled as a module.
  
  config TWL4030_WATCHDOG
  	tristate "TWL4030 Watchdog"
  	depends on TWL4030_CORE
  	select WATCHDOG_CORE
  	help
  	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
  	  watchdog timer support for TWL4030 chips.
  
  config STMP3XXX_RTC_WATCHDOG
  	tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
  	depends on RTC_DRV_STMP
  	select WATCHDOG_CORE
  	help
  	  Say Y here to include support for the watchdog timer inside
  	  the RTC for the STMP37XX/378X or i.MX23/28 SoC.
  	  To compile this driver as a module, choose M here: the
  	  module will be called stmp3xxx_rtc_wdt.
  
  config NUC900_WATCHDOG
  	tristate "Nuvoton NUC900 watchdog"
  	depends on ARCH_W90X900
  	help
  	  Say Y here if to include support for the watchdog timer
  	  for the Nuvoton NUC900 series SoCs.
  	  To compile this driver as a module, choose M here: the
  	  module will be called nuc900_wdt.
  
  config TS72XX_WATCHDOG
  	tristate "TS-72XX SBC Watchdog"
  	depends on MACH_TS72XX
  	help
  	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
  	  watchdog timer implemented in a external CPLD chip. Say Y here
  	  if you want to support for the watchdog timer on TS-72XX boards.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ts72xx_wdt.
  
  config MAX63XX_WATCHDOG
  	tristate "Max63xx watchdog"
  	depends on ARM && HAS_IOMEM
  	select WATCHDOG_CORE
  	help
  	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
  
  config IMX2_WDT
  	tristate "IMX2+ Watchdog"
  	depends on ARCH_MXC
  	help
  	  This is the driver for the hardware watchdog
  	  on the Freescale IMX2 and later processors.
  	  If you have one of these processors and wish to have
  	  watchdog support enabled, say Y, otherwise say N.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called imx2_wdt.
  
  config UX500_WATCHDOG
  	tristate "ST-Ericsson Ux500 watchdog"
  	depends on MFD_DB8500_PRCMU
  	select WATCHDOG_CORE
  	default y
  	help
  	  Say Y here to include Watchdog timer support for the watchdog
  	  existing in the prcmu of ST-Ericsson Ux500 series platforms.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ux500_wdt.
  
  config RETU_WATCHDOG
  	tristate "Retu watchdog"
  	depends on MFD_RETU
  	select WATCHDOG_CORE
  	help
  	  Retu watchdog driver for Nokia Internet Tablets (770, N800,
  	  N810). At least on N800 the watchdog cannot be disabled, so
  	  this driver is essential and you should enable it.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called retu_wdt.
  
  config MOXART_WDT
  	tristate "MOXART watchdog"
  	depends on ARCH_MOXART
  	help
  	  Say Y here to include Watchdog timer support for the watchdog
  	  existing on the MOXA ART SoC series platforms.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called moxart_wdt.
  
  config SIRFSOC_WATCHDOG
  	tristate "SiRFSOC watchdog"
  	depends on ARCH_SIRF
  	select WATCHDOG_CORE
  	default y
  	help
  	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
  	  the watchdog triggers the system will be reset.
  
  # AVR32 Architecture
  
  config AT32AP700X_WDT
  	tristate "AT32AP700x watchdog"
  	depends on CPU_AT32AP700X
  	help
  	  Watchdog timer embedded into AT32AP700x devices. This will reboot
  	  your system when the timeout is reached.
  
  # BLACKFIN Architecture
  
  config BFIN_WDT
  	tristate "Blackfin On-Chip Watchdog Timer"
  	depends on BLACKFIN
  	---help---
  	  If you say yes here you will get support for the Blackfin On-Chip
  	  Watchdog Timer. If you have one of these processors and wish to
  	  have watchdog support enabled, say Y, otherwise say N.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called bfin_wdt.
  
  # CRIS Architecture
  
  # FRV Architecture
  
  # X86 (i386 + ia64 + x86_64) Architecture
  
  config ACQUIRE_WDT
  	tristate "Acquire SBC Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on Single Board
  	  Computers produced by Acquire Inc (and others). This watchdog
  	  simply watches your kernel to make sure it doesn't freeze, and if
  	  it does, it reboots your computer after a certain amount of time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called acquirewdt.
  
  	  Most people will say N.
  
  config ADVANTECH_WDT
  	tristate "Advantech SBC Watchdog Timer"
  	depends on X86
  	help
  	  If you are configuring a Linux kernel for the Advantech single-board
  	  computer, say `Y' here to support its built-in watchdog timer
  	  feature. More information can be found at
  	  <http://www.advantech.com.tw/products/>
  
  config ALIM1535_WDT
  	tristate "ALi M1535 PMU Watchdog Timer"
  	depends on X86 && PCI
  	---help---
  	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called alim1535_wdt.
  
  	  Most people will say N.
  
  config ALIM7101_WDT
  	tristate "ALi M7101 PMU Computer Watchdog"
  	depends on PCI
  	help
  	  This is the driver for the hardware watchdog on the ALi M7101 PMU
  	  as used in the x86 Cobalt servers and also found in some
  	  SPARC Netra servers too.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called alim7101_wdt.
  
  	  Most people will say N.
  
  config F71808E_WDT
  	tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
  	depends on X86
  	help
  	  This is the driver for the hardware watchdog on the Fintek
  	  F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
  
  	  You can compile this driver directly into the kernel, or use
  	  it as a module.  The module will be called f71808e_wdt.
  
  config SP5100_TCO
  	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
  	depends on X86 && PCI
  	---help---
  	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
  	  (Total Cost of Ownership) timer is a watchdog timer that will reboot
  	  the machine after its expiration. The expiration time can be
  	  configured with the "heartbeat" parameter.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sp5100_tco.
  
  config GEODE_WDT
  	tristate "AMD Geode CS5535/CS5536 Watchdog"
  	depends on CS5535_MFGPT
  	help
  	  This driver enables a watchdog capability built into the
  	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
  	  processors.  This watchdog watches your kernel to make sure
  	  it doesn't freeze, and if it does, it reboots your computer after
  	  a certain amount of time.
  
  	  You can compile this driver directly into the kernel, or use
  	  it as a module.  The module will be called geodewdt.
  
  config SC520_WDT
  	tristate "AMD Elan SC520 processor Watchdog"
  	depends on X86
  	help
  	  This is the driver for the hardware watchdog built in to the
  	  AMD "Elan" SC520 microcomputer commonly used in embedded systems.
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  You can compile this driver directly into the kernel, or use
  	  it as a module.  The module will be called sc520_wdt.
  
  config SBC_FITPC2_WATCHDOG
  	tristate "Compulab SBC-FITPC2 watchdog"
  	depends on X86
  	---help---
  	  This is the driver for the built-in watchdog timer on the fit-PC2,
  	  fit-PC2i, CM-iAM single-board computers made by Compulab.
  
  	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
  	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
  
  	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
  	  so system will not be restarted while user in BIOS setup.
  
  	  Once watchdog was enabled the system will be restarted every
  	  "Watchdog Timer Value" period, so to prevent it user can restart or
  	  disable the watchdog.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sbc_fitpc2_wdt.
  
  	  Most people will say N.
  
  config EUROTECH_WDT
  	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
  	depends on X86
  	help
  	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
  	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
  	  information are at <http://www.eurotech.it/>.
  
  config IB700_WDT
  	tristate "IB700 SBC Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the IB700 Single
  	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
  	  simply watches your kernel to make sure it doesn't freeze, and if
  	  it does, it reboots your computer after a certain amount of time.
  
  	  This driver is like the WDT501 driver but for slightly different hardware.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ib700wdt.
  
  	  Most people will say N.
  
  config IBMASR
  	tristate "IBM Automatic Server Restart"
  	depends on X86
  	help
  	  This is the driver for the IBM Automatic Server Restart watchdog
  	  timer built-in into some eServer xSeries machines.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ibmasr.
  
  config WAFER_WDT
  	tristate "ICP Single Board Computer Watchdog Timer"
  	depends on X86
  	help
  	  This is a driver for the hardware watchdog on the ICP Single
  	  Board Computer. This driver is working on (at least) the following
  	  IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called wafer5823wdt.
  
  config I6300ESB_WDT
  	tristate "Intel 6300ESB Timer/Watchdog"
  	depends on PCI
  	---help---
  	  Hardware driver for the watchdog timer built into the Intel
  	  6300ESB controller hub.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called i6300esb.
  
  config IE6XX_WDT
  	tristate "Intel Atom E6xx Watchdog"
  	depends on X86 && PCI
  	select WATCHDOG_CORE
  	select MFD_CORE
  	select LPC_SCH
  	---help---
  	  Hardware driver for the watchdog timer built into the Intel
  	  Atom E6XX (TunnelCreek) processor.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called ie6xx_wdt.
  
  config INTEL_SCU_WATCHDOG
  	bool "Intel SCU Watchdog for Mobile Platforms"
  	depends on X86_INTEL_MID
  	---help---
  	  Hardware driver for the watchdog time built into the Intel SCU
  	  for Intel Mobile Platforms.
  
  	  To compile this driver as a module, choose M here.
  
  config ITCO_WDT
  	tristate "Intel TCO Timer/Watchdog"
  	depends on (X86 || IA64) && PCI
  	select WATCHDOG_CORE
  	select LPC_ICH
  	---help---
  	  Hardware driver for the intel TCO timer based watchdog devices.
  	  These drivers are included in the Intel 82801 I/O Controller
  	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
  	  controller hub.
  
  	  The TCO (Total Cost of Ownership) timer is a watchdog timer
  	  that will reboot the machine after its second expiration. The
  	  expiration time can be configured with the "heartbeat" parameter.
  
  	  On some motherboards the driver may fail to reset the chipset's
  	  NO_REBOOT flag which prevents the watchdog from rebooting the
  	  machine. If this is the case you will get a kernel message like
  	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called iTCO_wdt.
  
  config ITCO_VENDOR_SUPPORT
  	bool "Intel TCO Timer/Watchdog Specific Vendor Support"
  	depends on ITCO_WDT
  	---help---
  	  Add vendor specific support to the intel TCO timer based watchdog
  	  devices. At this moment we only have additional support for some
  	  SuperMicro Inc. motherboards.
  
  config IT8712F_WDT
  	tristate "IT8712F (Smart Guardian) Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the built-in watchdog timer on the IT8712F
  	  Super I/0 chipset used on many motherboards.
  
  	  If the driver does not work, then make sure that the game port in
  	  the BIOS is enabled.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called it8712f_wdt.
  
  config IT87_WDT
  	tristate "IT87 Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the ITE IT8702,
  	  IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
  	  Super I/O chips.
  
  	  If the driver does not work, then make sure that the game port in
  	  the BIOS is enabled.
  
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  To compile this driver as a module, choose M here: the module will
  	  be called it87_wdt.
  
  config HP_WATCHDOG
  	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
  	depends on X86 && PCI
  	help
  	  A software monitoring watchdog and NMI sourcing driver. This driver
  	  will detect lockups and provide a stack trace. This is a driver that
  	  will only load on an HP ProLiant system with a minimum of iLO2 support.
  	  To compile this driver as a module, choose M here: the module will be
  	  called hpwdt.
  
  config KEMPLD_WDT
  	tristate "Kontron COM Watchdog Timer"
  	depends on MFD_KEMPLD
  	select WATCHDOG_CORE
  	help
  	  Support for the PLD watchdog on some Kontron ETX and COMexpress
  	  (ETXexpress) modules
  
  	  This driver can also be built as a module. If so, the module will be
  	  called kempld_wdt.
  
  config HPWDT_NMI_DECODING
  	bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
  	depends on HP_WATCHDOG
  	default y
  	help
  	  When an NMI occurs this feature will make the necessary BIOS calls to
  	  log the cause of the NMI.
  
  config SC1200_WDT
  	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
  	depends on X86
  	help
  	  This is a driver for National Semiconductor PC87307/PC97307 hardware
  	  watchdog cards as found on the SC1200. This watchdog is mainly used
  	  for power management purposes and can be used to power down the device
  	  during inactivity periods (includes interrupt activity monitoring).
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sc1200wdt.
  
  	  Most people will say N.
  
  config SCx200_WDT
  	tristate "National Semiconductor SCx200 Watchdog"
  	depends on SCx200 && PCI
  	help
  	  Enable the built-in watchdog timer support on the National
  	  Semiconductor SCx200 processors.
  
  	  If compiled as a module, it will be called scx200_wdt.
  
  config PC87413_WDT
  	tristate "NS PC87413 watchdog"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the PC87413 chipset
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called pc87413_wdt.
  
  	  Most people will say N.
  
  config NV_TCO
  	tristate "nVidia TCO Timer/Watchdog"
  	depends on X86 && PCI
  	---help---
  	  Hardware driver for the TCO timer built into the nVidia Hub family
  	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
  	  watchdog timer that will reboot the machine after its second
  	  expiration. The expiration time can be configured with the
  	  "heartbeat" parameter.
  
  	  On some motherboards the driver may fail to reset the chipset's
  	  NO_REBOOT flag which prevents the watchdog from rebooting the
  	  machine. If this is the case you will get a kernel message like
  	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called nv_tco.
  
  config RDC321X_WDT
  	tristate "RDC R-321x SoC watchdog"
  	depends on X86_RDC321X
  	help
  	  This is the driver for the built in hardware watchdog
  	  in the RDC R-321x SoC.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called rdc321x_wdt.
  
  config 60XX_WDT
  	tristate "SBC-60XX Watchdog Timer"
  	depends on X86
  	help
  	  This driver can be used with the watchdog timer found on some
  	  single board computers, namely the 6010 PII based computer.
  	  It may well work with other cards.  It reads port 0x443 to enable
  	  and re-set the watchdog timer, and reads port 0x45 to disable
  	  the watchdog.  If you have a card that behave in similar ways,
  	  you can probably make this driver work with your card as well.
  
  	  You can compile this driver directly into the kernel, or use
  	  it as a module.  The module will be called sbc60xxwdt.
  
  config SBC8360_WDT
  	tristate "SBC8360 Watchdog Timer"
  	depends on X86
  	---help---
  
  	  This is the driver for the hardware watchdog on the SBC8360 Single
  	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sbc8360.
  
  	  Most people will say N.
  
  config SBC7240_WDT
  	tristate "SBC Nano 7240 Watchdog Timer"
  	depends on X86_32 && !UML
  	---help---
  	  This is the driver for the hardware watchdog found on the IEI
  	  single board computers EPIC Nano 7240 (and likely others). This
  	  watchdog simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sbc7240_wdt.
  
  config CPU5_WDT
  	tristate "SMA CPU5 Watchdog"
  	depends on X86
  	---help---
  	  TBD.
  	  To compile this driver as a module, choose M here: the
  	  module will be called cpu5wdt.
  
  config SMSC_SCH311X_WDT
  	tristate "SMSC SCH311X Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog timer on the
  	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
  	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
  	  serial ports).
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sch311x_wdt.
  
  config SMSC37B787_WDT
  	tristate "Winbond SMsC37B787 Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog component on the
  	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
  	  from Vision Systems and maybe others.
  
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  Usually a userspace daemon will notify the kernel WDT driver that
  	  userspace is still alive, at regular intervals.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called smsc37b787_wdt.
  
  	  Most people will say N.
  
  config VIA_WDT
  	tristate "VIA Watchdog Timer"
  	depends on X86 && PCI
  	select WATCHDOG_CORE
  	---help---
  	This is the driver for the hardware watchdog timer on VIA
  	southbridge chipset CX700, VX800/VX820 or VX855/VX875.
  
  	To compile this driver as a module, choose M here; the module
  	will be called via_wdt.
  
  	Most people will say N.
  
  config W83627HF_WDT
  	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
  	depends on X86
  	select WATCHDOG_CORE
  	---help---
  	  This is the driver for the hardware watchdog on the following
  	  Super I/O chips.
  		W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
  		W83637HF
  		W83667HG/HG-B
  		W83687THF
  		W83697HF
  		W83697UG
  		NCT6775
  		NCT6776
  		NCT6779
  
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called w83627hf_wdt.
  
  	  Most people will say N.
  
  config W83697HF_WDT
  	tristate "W83697HF/W83697HG Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the W83697HF/HG
  	  chipset as used in Dedibox/VIA motherboards (and likely others).
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called w83697hf_wdt.
  
  	  Most people will say N.
  
  config W83697UG_WDT
  	tristate "W83697UG/W83697UF Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the W83697UG/UF
  	  chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
  	  This watchdog simply watches your kernel to make sure it doesn't
  	  freeze, and if it does, it reboots your computer after a certain
  	  amount of time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called w83697ug_wdt.
  
  	  Most people will say N.
  
  config W83877F_WDT
  	tristate "W83877F (EMACS) Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the W83877F chipset
  	  as used in EMACS PC-104 motherboards (and likely others).  This
  	  watchdog simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called w83877f_wdt.
  
  	  Most people will say N.
  
  config W83977F_WDT
  	tristate "W83977F (PCM-5335) Watchdog Timer"
  	depends on X86
  	---help---
  	  This is the driver for the hardware watchdog on the W83977F I/O chip
  	  as used in AAEON's PCM-5335 SBC (and likely others).  This
  	  watchdog simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called w83977f_wdt.
  
  config MACHZ_WDT
  	tristate "ZF MachZ Watchdog"
  	depends on X86
  	---help---
  	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
  	  N.  This is the driver for the watchdog timer built-in on that
  	  processor using ZF-Logic interface.  This watchdog simply watches
  	  your kernel to make sure it doesn't freeze, and if it does, it
  	  reboots your computer after a certain amount of time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called machzwd.
  
  config SBC_EPX_C3_WATCHDOG
  	tristate "Winsystems SBC EPX-C3 watchdog"
  	depends on X86
  	---help---
  	  This is the driver for the built-in watchdog timer on the EPX-C3
  	  Single-board computer made by Winsystems, Inc.
  
  	  *Note*: This hardware watchdog is not probeable and thus there
  	  is no way to know if writing to its IO address will corrupt
  	  your system or have any real effect.  The only way to be sure
  	  that this driver does what you want is to make sure you
  	  are running it on an EPX-C3 from Winsystems with the watchdog
  	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
  	  IO ports.  Basically, the assumption is made that if you compile
  	  this driver into your kernel and/or load it as a module, that you
  	  know what you are doing and that you are in fact running on an
  	  EPX-C3 board!
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called sbc_epx_c3.
  
  # M32R Architecture
  
  # M68K Architecture
  
  config M54xx_WATCHDOG
  	tristate "MCF54xx watchdog support"
  	depends on M548x
  	help
  	  To compile this driver as a module, choose M here: the
  	  module will be called m54xx_wdt.
  
  # MicroBlaze Architecture
  
  config XILINX_WATCHDOG
  	tristate "Xilinx Watchdog timer"
  	depends on MICROBLAZE
  	---help---
  	  Watchdog driver for the xps_timebase_wdt ip core.
  
  	  IMPORTANT: The xps_timebase_wdt parent must have the property
  	  "clock-frequency" at device tree.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called of_xilinx_wdt.
  
  # MIPS Architecture
  
  config ATH79_WDT
  	tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
  	depends on ATH79
  	help
  	  Hardware driver for the built-in watchdog timer on the Atheros
  	  AR71XX/AR724X/AR913X SoCs.
  
  config BCM47XX_WDT
  	tristate "Broadcom BCM47xx Watchdog Timer"
  	depends on BCM47XX
  	select WATCHDOG_CORE
  	help
  	  Hardware driver for the Broadcom BCM47xx Watchdog Timer.
  
  config RC32434_WDT
  	tristate "IDT RC32434 SoC Watchdog Timer"
  	depends on MIKROTIK_RB532
  	help
  	  Hardware driver for the IDT RC32434 SoC built-in
  	  watchdog timer.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called rc32434_wdt.
  
  config INDYDOG
  	tristate "Indy/I2 Hardware Watchdog"
  	depends on SGI_HAS_INDYDOG
  	help
  	  Hardware driver for the Indy's/I2's watchdog. This is a
  	  watchdog timer that will reboot the machine after a 60 second
  	  timer expired and no process has written to /dev/watchdog during
  	  that time.
  
  config JZ4740_WDT
  	tristate "Ingenic jz4740 SoC hardware watchdog"
  	depends on MACH_JZ4740
  	select WATCHDOG_CORE
  	help
  	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
  
  config WDT_MTX1
  	tristate "MTX-1 Hardware Watchdog"
  	depends on MIPS_MTX1
  	help
  	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
  	  will reboot the machine after a 100 seconds timer expired.
  
  config PNX833X_WDT
  	tristate "PNX833x Hardware Watchdog"
  	depends on SOC_PNX8335
  	help
  	  Hardware driver for the PNX833x's watchdog. This is a
  	  watchdog timer that will reboot the machine after a programmable
  	  timer has expired and no process has written to /dev/watchdog during
  	  that time.
  
  config SIBYTE_WDOG
  	tristate "Sibyte SoC hardware watchdog"
  	depends on CPU_SB1
  	help
  	  Watchdog driver for the built in watchdog hardware in Sibyte
  	  SoC processors.  There are apparently two watchdog timers
  	  on such processors; this driver supports only the first one,
  	  because currently Linux only supports exporting one watchdog
  	  to userspace.
  
  	  To compile this driver as a loadable module, choose M here.
  	  The module will be called sb_wdog.
  
  config AR7_WDT
  	tristate "TI AR7 Watchdog Timer"
  	depends on AR7
  	help
  	  Hardware driver for the TI AR7 Watchdog Timer.
  
  config TXX9_WDT
  	tristate "Toshiba TXx9 Watchdog Timer"
  	depends on CPU_TX39XX || CPU_TX49XX
  	select WATCHDOG_CORE
  	help
  	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
  
  config OCTEON_WDT
  	tristate "Cavium OCTEON SOC family Watchdog Timer"
  	depends on CAVIUM_OCTEON_SOC
  	default y
  	select EXPORT_UASM if OCTEON_WDT = m
  	help
  	  Hardware driver for OCTEON's on chip watchdog timer.
  	  Enables the watchdog for all cores running Linux. It
  	  installs a NMI handler and pokes the watchdog based on an
  	  interrupt.  On first expiration of the watchdog, the
  	  interrupt handler pokes it.  The second expiration causes an
  	  NMI that prints a message. The third expiration causes a
  	  global soft reset.
  
  	  When userspace has /dev/watchdog open, no poking is done
  	  from the first interrupt, it is then only poked when the
  	  device is written.
  
  config BCM63XX_WDT
  	tristate "Broadcom BCM63xx hardware watchdog"
  	depends on BCM63XX
  	help
  	  Watchdog driver for the built in watchdog hardware in Broadcom
  	  BCM63xx SoC.
  
  	  To compile this driver as a loadable module, choose M here.
  	  The module will be called bcm63xx_wdt.
  
  config BCM2835_WDT
  	tristate "Broadcom BCM2835 hardware watchdog"
  	depends on ARCH_BCM2835
  	select WATCHDOG_CORE
  	help
  	  Watchdog driver for the built in watchdog hardware in Broadcom
  	  BCM2835 SoC.
  
  	  To compile this driver as a loadable module, choose M here.
  	  The module will be called bcm2835_wdt.
  
  config BCM_KONA_WDT
  	tristate "BCM Kona Watchdog"
  	depends on ARCH_BCM
  	select WATCHDOG_CORE
  	help
  	  Support for the watchdog timer on the following Broadcom BCM281xx
  	  family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
  	  BCM28155 variants.
  
  	  Say 'Y' or 'M' here to enable the driver. The module will be called
  	  bcm_kona_wdt.
  
  config BCM_KONA_WDT_DEBUG
  	bool "DEBUGFS support for BCM Kona Watchdog"
  	depends on BCM_KONA_WDT
  	help
  	  If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
  	  access to the driver's internal data structures as well as watchdog
  	  timer hardware registres.
  
  	  If in doubt, say 'N'.
  
  config LANTIQ_WDT
  	tristate "Lantiq SoC watchdog"
  	depends on LANTIQ
  	help
  	  Hardware driver for the Lantiq SoC Watchdog Timer.
  
  config RALINK_WDT
  	tristate "Ralink SoC watchdog"
  	select WATCHDOG_CORE
  	depends on RALINK
  	help
  	  Hardware driver for the Ralink SoC Watchdog Timer.
  
  # PARISC Architecture
  
  # POWERPC Architecture
  
  config GEF_WDT
  	tristate "GE Watchdog Timer"
  	depends on GE_FPGA
  	---help---
  	  Watchdog timer found in a number of GE single board computers.
  
  config MPC5200_WDT
  	bool "MPC52xx Watchdog Timer"
  	depends on PPC_MPC52xx
  	help
  	  Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
  
  config 8xxx_WDT
  	tristate "MPC8xxx Platform Watchdog Timer"
  	depends on PPC_8xx || PPC_83xx || PPC_86xx
  	select WATCHDOG_CORE
  	help
  	  This driver is for a SoC level watchdog that exists on some
  	  Freescale PowerPC processors. So far this driver supports:
  	  - MPC8xx watchdogs
  	  - MPC83xx watchdogs
  	  - MPC86xx watchdogs
  
  	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
  
  config MV64X60_WDT
  	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
  	depends on MV64X60
  
  config PIKA_WDT
  	tristate "PIKA FPGA Watchdog"
  	depends on WARP
  	default y
  	help
  	  This enables the watchdog in the PIKA FPGA. Currently used on
  	  the Warp platform.
  
  config BOOKE_WDT
  	tristate "PowerPC Book-E Watchdog Timer"
  	depends on BOOKE || 4xx
  	select WATCHDOG_CORE
  	---help---
  	  Watchdog driver for PowerPC Book-E chips, such as the Freescale
  	  MPC85xx SOCs and the IBM PowerPC 440.
  
  	  Please see Documentation/watchdog/watchdog-api.txt for
  	  more information.
  
  config BOOKE_WDT_DEFAULT_TIMEOUT
  	int "PowerPC Book-E Watchdog Timer Default Timeout"
  	depends on BOOKE_WDT
  	default 38 if PPC_FSL_BOOK3E
  	range 0 63 if PPC_FSL_BOOK3E
  	default 3 if !PPC_FSL_BOOK3E
  	range 0 3 if !PPC_FSL_BOOK3E
  	help
  	  Select the default watchdog timer period to be used by the PowerPC
  	  Book-E watchdog driver.  A watchdog "event" occurs when the bit
  	  position represented by this number transitions from zero to one.
  
  	  For Freescale Book-E processors, this is a number between 0 and 63.
  	  For other Book-E processors, this is a number between 0 and 3.
  
  	  The value can be overridden by the wdt_period command-line parameter.
  
  config MEN_A21_WDT
         tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
         select WATCHDOG_CORE
         depends on GPIOLIB
         help
          Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
  
  	The driver can also be built as a module. If so, the module will be
  	called mena21_wdt.
  
  	If unsure select N here.
  
  # PPC64 Architecture
  
  config WATCHDOG_RTAS
  	tristate "RTAS watchdog"
  	depends on PPC_RTAS
  	help
  	  This driver adds watchdog support for the RTAS watchdog.
  
  	  To compile this driver as a module, choose M here. The module
  	  will be called wdrtas.
  
  # S390 Architecture
  
  config ZVM_WATCHDOG
  	tristate "z/VM Watchdog Timer"
  	depends on S390
  	help
  	  IBM s/390 and zSeries machines running under z/VM 5.1 or later
  	  provide a virtual watchdog timer to their guest that cause a
  	  user define Control Program command to be executed after a
  	  timeout.
  
  	  To compile this driver as a module, choose M here. The module
  	  will be called vmwatchdog.
  
  # SUPERH (sh + sh64) Architecture
  
  config SH_WDT
  	tristate "SuperH Watchdog"
  	depends on SUPERH && (CPU_SH3 || CPU_SH4)
  	select WATCHDOG_CORE
  	help
  	  This driver adds watchdog support for the integrated watchdog in the
  	  SuperH processors. If you have one of these processors and wish
  	  to have watchdog support enabled, say Y, otherwise say N.
  
  	  As a side note, saying Y here will automatically boost HZ to 1000
  	  so that the timer has a chance to clear the overflow counter. On
  	  slower systems (such as the SH-2 and SH-3) this will likely yield
  	  some performance issues. As such, the WDT should be avoided here
  	  unless it is absolutely necessary.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called shwdt.
  
  # SPARC Architecture
  
  # SPARC64 Architecture
  
  config WATCHDOG_CP1XXX
  	tristate "CP1XXX Hardware Watchdog support"
  	depends on SPARC64 && PCI
  	---help---
  	  This is the driver for the hardware watchdog timers present on
  	  Sun Microsystems CompactPCI models CP1400 and CP1500.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called cpwatchdog.
  
  	  If you do not have a CompactPCI model CP1400 or CP1500, or
  	  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
  	  you should say N to this option.
  
  config WATCHDOG_RIO
  	tristate "RIO Hardware Watchdog support"
  	depends on SPARC64 && PCI
  	help
  	  Say Y here to support the hardware watchdog capability on Sun RIO
  	  machines.  The watchdog timeout period is normally one minute but
  	  can be changed with a boot-time parameter.
  
  # XTENSA Architecture
  
  # Xen Architecture
  
  config XEN_WDT
  	tristate "Xen Watchdog support"
  	depends on XEN
  	help
  	  Say Y here to support the hypervisor watchdog capability provided
  	  by Xen 4.0 and newer.  The watchdog timeout period is normally one
  	  minute but can be changed with a boot-time parameter.
  
  config UML_WATCHDOG
  	tristate "UML watchdog"
  	depends on UML
  
  #
  # ISA-based Watchdog Cards
  #
  
  comment "ISA-based Watchdog Cards"
  	depends on ISA
  
  config PCWATCHDOG
  	tristate "Berkshire Products ISA-PC Watchdog"
  	depends on ISA
  	---help---
  	  This is the driver for the Berkshire Products ISA-PC Watchdog card.
  	  This card simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time. This driver is like the WDT501 driver but for different
  	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
  	  watchdog cards can be ordered from <http://www.berkprod.com/>.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called pcwd.
  
  	  Most people will say N.
  
  config MIXCOMWD
  	tristate "Mixcom Watchdog"
  	depends on ISA
  	---help---
  	  This is a driver for the Mixcom hardware watchdog cards.  This
  	  watchdog simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called mixcomwd.
  
  	  Most people will say N.
  
  config WDT
  	tristate "WDT Watchdog timer"
  	depends on ISA
  	---help---
  	  If you have a WDT500P or WDT501P watchdog board, say Y here,
  	  otherwise N. It is not possible to probe for this board, which means
  	  that you have to inform the kernel about the IO port and IRQ that
  	  is needed (you can do this via the io and irq parameters)
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called wdt.
  
  #
  # PCI-based Watchdog Cards
  #
  
  comment "PCI-based Watchdog Cards"
  	depends on PCI
  
  config PCIPCWATCHDOG
  	tristate "Berkshire Products PCI-PC Watchdog"
  	depends on PCI
  	---help---
  	  This is the driver for the Berkshire Products PCI-PC Watchdog card.
  	  This card simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time. The card can also monitor the internal temperature of the PC.
  	  More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called pcwd_pci.
  
  	  Most people will say N.
  
  config WDTPCI
  	tristate "PCI-WDT500/501 Watchdog timer"
  	depends on PCI
  	---help---
  	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
  
  	  If you have a PCI-WDT501 watchdog board then you can enable the
  	  temperature sensor by setting the type parameter to 501.
  
  	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
  	  can do this via the tachometer parameter. Only do this if you have a
  	  fan tachometer actually set up.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called wdt_pci.
  
  #
  # USB-based Watchdog Cards
  #
  
  comment "USB-based Watchdog Cards"
  	depends on USB
  
  config USBPCWATCHDOG
  	tristate "Berkshire Products USB-PC Watchdog"
  	depends on USB
  	---help---
  	  This is the driver for the Berkshire Products USB-PC Watchdog card.
  	  This card simply watches your kernel to make sure it doesn't freeze,
  	  and if it does, it reboots your computer after a certain amount of
  	  time. The card can also monitor the internal temperature of the PC.
  	  More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
  
  	  To compile this driver as a module, choose M here: the
  	  module will be called pcwd_usb.
  
  	  Most people will say N.
  
  endif # WATCHDOG