menuconfig REGULATOR
  	bool "Voltage and Current Regulator Support"
  	help
  	  Generic Voltage and Current Regulator support.
  
  	  This framework is designed to provide a generic interface to voltage
  	  and current regulators within the Linux kernel. It's intended to
  	  provide voltage and current control to client or consumer drivers and
  	  also provide status information to user space applications through a
  	  sysfs interface.
  
  	  The intention is to allow systems to dynamically control regulator
  	  output in order to save power and prolong battery life. This applies
  	  to both voltage regulators (where voltage output is controllable) and
  	  current sinks (where current output is controllable).
  
  	  This framework safely compiles out if not selected so that client
  	  drivers can still be used in systems with no software controllable
  	  regulators.
  
  	  If unsure, say no.
  
  
  if REGULATOR
  
  config REGULATOR_DEBUG
  	bool "Regulator debug support"
  	help
  	  Say yes here to enable debugging support.
  
  config REGULATOR_FIXED_VOLTAGE
  	tristate "Fixed voltage regulator support"
  	help
  	  This driver provides support for fixed voltage regulators,
  	  useful for systems which use a combination of software
  	  managed regulators and simple non-configurable regulators.
  
  config REGULATOR_VIRTUAL_CONSUMER
  	tristate "Virtual regulator consumer support"
  	help
  	  This driver provides a virtual consumer for the voltage and
  	  current regulator API which provides sysfs controls for
  	  configuring the supplies requested.  This is mainly useful
  	  for test purposes.
  
  	  If unsure, say no.
  
  config REGULATOR_USERSPACE_CONSUMER
  	tristate "Userspace regulator consumer support"
  	help
  	  There are some classes of devices that are controlled entirely
  	  from user space. Userspace consumer driver provides ability to
  	  control power supplies for such devices.
  
  	  If unsure, say no.
  
  config REGULATOR_88PM800
  	tristate "Marvell 88PM800 Power regulators"
  	depends on MFD_88PM800
  	help
  	  This driver supports Marvell 88PM800 voltage regulator chips.
  	  It delivers digitally programmable output,
  	  the voltage is programmed via I2C interface.
  	  It's suitable to support PXA988 chips to control VCC_MAIN and
  	  various voltages.
  
  config REGULATOR_88PM8607
  	tristate "Marvell 88PM8607 Power regulators"
  	depends on MFD_88PM860X=y
  	help
  	  This driver supports 88PM8607 voltage regulator chips.
  
  config REGULATOR_ACT8865
  	tristate "Active-semi act8865 voltage regulator"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver controls a active-semi act8865 voltage output
  	  regulator via I2C bus.
  
  config REGULATOR_AD5398
  	tristate "Analog Devices AD5398/AD5821 regulators"
  	depends on I2C
  	help
  	  This driver supports AD5398 and AD5821 current regulator chips.
  	  If building into module, its name is ad5398.ko.
  
  config REGULATOR_ANATOP
  	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
  	depends on MFD_SYSCON
  	help
  	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
  	  regulators. It is recommended that this option be
  	  enabled on i.MX6 platform.
  
  config REGULATOR_AAT2870
  	tristate "AnalogicTech AAT2870 Regulators"
  	depends on MFD_AAT2870_CORE
  	help
  	  If you have a AnalogicTech AAT2870 say Y to enable the
  	  regulator driver.
  
  config REGULATOR_AB3100
  	tristate "ST-Ericsson AB3100 Regulator functions"
  	depends on AB3100_CORE
  	default y if AB3100_CORE
  	help
  	 These regulators correspond to functionality in the
  	 AB3100 analog baseband dealing with power regulators
  	 for the system.
  
  config REGULATOR_AB8500
  	bool "ST-Ericsson AB8500 Power Regulators"
  	depends on AB8500_CORE
  	help
  	  This driver supports the regulators found on the ST-Ericsson mixed
  	  signal AB8500 PMIC
  
  config REGULATOR_ARIZONA
  	tristate "Wolfson Arizona class devices"
  	depends on MFD_ARIZONA
  	depends on SND_SOC
  	help
  	  Support for the regulators found on Wolfson Arizona class
  	  devices.
  
  config REGULATOR_AS3711
  	tristate "AS3711 PMIC"
  	depends on MFD_AS3711
  	help
  	  This driver provides support for the voltage regulators on the
  	  AS3711 PMIC
  
  config REGULATOR_AS3722
  	tristate "AMS AS3722 PMIC Regulators"
  	depends on MFD_AS3722
  	help
  	  This driver provides support for the voltage regulators on the
  	  AS3722 PMIC. This will enable support for all the software
  	  controllable DCDC/LDO regulators.
  
  config REGULATOR_DA903X
  	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
  	depends on PMIC_DA903X
  	help
  	  Say y here to support the BUCKs and LDOs regulators found on
  	  Dialog Semiconductor DA9030/DA9034 PMIC.
  
  config REGULATOR_DA9052
  	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
  	depends on PMIC_DA9052
  	help
  	  This driver supports the voltage regulators of DA9052-BC and
  	  DA9053-AA/Bx PMIC.
  
  config REGULATOR_DA9055
  	tristate "Dialog Semiconductor DA9055 regulators"
  	depends on MFD_DA9055
  	help
  	  Say y here to support the BUCKs and LDOs regulators found on
  	  Dialog Semiconductor DA9055 PMIC.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called da9055-regulator.
  
  config REGULATOR_DA9063
  	tristate "Dialog Semiconductor DA9063 regulators"
  	depends on MFD_DA9063
  	help
  	  Say y here to support the BUCKs and LDOs regulators found on
  	  DA9063 PMICs.
  
  	  This driver can also be built as a module. If so, the module
  	  will be called da9063-regulator.
  
  config REGULATOR_DA9210
  	tristate "Dialog Semiconductor DA9210 regulator"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  Say y here to support for the Dialog Semiconductor DA9210.
  	  The DA9210 is a multi-phase synchronous step down
  	  converter 12A DC-DC Buck controlled through an I2C
  	  interface.
  
  config REGULATOR_DBX500_PRCMU
  	bool
  
  config REGULATOR_DB8500_PRCMU
  	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
  	depends on MFD_DB8500_PRCMU
  	select REGULATOR_DBX500_PRCMU
  	help
  	  This driver supports the voltage domain regulators controlled by the
  	  DB8500 PRCMU
  
  config REGULATOR_FAN53555
  	tristate "Fairchild FAN53555 Regulator"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver supports Fairchild FAN53555 Digitally Programmable
  	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
  	  regulator that delivers a digitally programmable output from an
  	  input voltage supply of 2.5V to 5.5V. The output voltage is
  	  programmed through an I2C interface.
  
  config REGULATOR_GPIO
  	tristate "GPIO regulator support"
  	depends on GPIOLIB
  	help
  	  This driver provides support for regulators that can be
  	  controlled via gpios.
  	  It is capable of supporting current and voltage regulators
  	  and the platform has to provide a mapping of GPIO-states
  	  to target volts/amps.
  
  config REGULATOR_ISL6271A
  	tristate "Intersil ISL6271A Power regulator"
  	depends on I2C
  	help
  	  This driver supports ISL6271A voltage regulator chip.
  
  config REGULATOR_LP3971
  	tristate "National Semiconductors LP3971 PMIC regulator driver"
  	depends on I2C
  	help
  	 Say Y here to support the voltage regulators and convertors
  	 on National Semiconductors LP3971 PMIC
  
  config REGULATOR_LP3972
  	tristate "National Semiconductors LP3972 PMIC regulator driver"
  	depends on I2C
  	help
  	 Say Y here to support the voltage regulators and convertors
  	 on National Semiconductors LP3972 PMIC
  
  config REGULATOR_LP872X
  	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver supports LP8720/LP8725 PMIC
  
  config REGULATOR_LP8755
  	tristate "TI LP8755 High Performance PMU driver"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver supports LP8755 High Performance PMU driver. This
  	  chip contains six step-down DC/DC converters which can support
  	  9 mode multiphase configuration.
  
  config REGULATOR_LP8788
  	tristate "TI LP8788 Power Regulators"
  	depends on MFD_LP8788
  	help
  	  This driver supports LP8788 voltage regulator chip.
  
  config REGULATOR_MAX14577
  	tristate "Maxim 14577 regulator"
  	depends on MFD_MAX14577
  	help
  	  This driver controls a Maxim 14577 regulator via I2C bus.
  	  The regulators include safeout LDO and current regulator 'CHARGER'.
  
  config REGULATOR_MAX1586
  	tristate "Maxim 1586/1587 voltage regulator"
  	depends on I2C
  	help
  	  This driver controls a Maxim 1586 or 1587 voltage output
  	  regulator via I2C bus. The provided regulator is suitable
  	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
  
  config REGULATOR_MAX17135
          tristate "Maxim MAX17135 Regulator Support"
          depends on MFD_MAX17135
  
  config REGULATOR_MAX8649
  	tristate "Maxim 8649 voltage regulator"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver controls a Maxim 8649 voltage output regulator via
  	  I2C bus.
  
  config REGULATOR_MAX8660
  	tristate "Maxim 8660/8661 voltage regulator"
  	depends on I2C
  	help
  	  This driver controls a Maxim 8660/8661 voltage output
  	  regulator via I2C bus.
  
  config REGULATOR_MAX8907
  	tristate "Maxim 8907 voltage regulator"
  	depends on MFD_MAX8907
  	help
  	  This driver controls a Maxim 8907 voltage output regulator
  	  via I2C bus. The provided regulator is suitable for Tegra
  	  chip to control Step-Down DC-DC and LDOs.
  
  config REGULATOR_MAX8925
  	tristate "Maxim MAX8925 Power Management IC"
  	depends on MFD_MAX8925
  	help
  	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
  
  config REGULATOR_MAX8952
  	tristate "Maxim MAX8952 Power Management IC"
  	depends on I2C
  	help
  	  This driver controls a Maxim 8952 voltage output regulator
  	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
  	  modes ranging from 0.77V to 1.40V by 0.01V steps.
  
  config REGULATOR_MAX8973
  	tristate "Maxim MAX8973 voltage regulator "
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
  	  switching regulator delievers up to 9A of output current. Each
  	  phase operates at a 2MHz fixed frequency with a 120 deg shift
  	  from the adjacent phase, allowing the use of small magnetic component.
  
  config REGULATOR_MAX8997
  	tristate "Maxim 8997/8966 regulator"
  	depends on MFD_MAX8997
  	help
  	  This driver controls a Maxim 8997/8966 regulator
  	  via I2C bus. The provided regulator is suitable for S5PC110,
  	  S5PV210, and Exynos-4 chips to control VCC_CORE and
  	  VCC_USIM voltages.
  
  config REGULATOR_MAX8998
  	tristate "Maxim 8998 voltage regulator"
  	depends on MFD_MAX8998
  	help
  	  This driver controls a Maxim 8998 voltage output regulator
  	  via I2C bus. The provided regulator is suitable for S3C6410
  	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
  
  config REGULATOR_MAX77686
  	tristate "Maxim 77686 regulator"
  	depends on MFD_MAX77686
  	help
  	  This driver controls a Maxim 77686 regulator
  	  via I2C bus. The provided regulator is suitable for
  	  Exynos-4 chips to control VARM and VINT voltages.
  
  config REGULATOR_MAX77693
  	tristate "Maxim MAX77693 regulator"
  	depends on MFD_MAX77693
  	help
  	  This driver controls a Maxim 77693 regulator via I2C bus.
  	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
  	  and one current regulator 'CHARGER'. This is suitable for
  	  Exynos-4x12 chips.
  
  config REGULATOR_MC13XXX_CORE
  	tristate
  
  config REGULATOR_MC13783
  	tristate "Freescale MC13783 regulator driver"
  	depends on MFD_MC13XXX
  	select REGULATOR_MC13XXX_CORE
  	help
  	  Say y here to support the regulators found on the Freescale MC13783
  	  PMIC.
  
  config REGULATOR_MC13892
  	tristate "Freescale MC13892 regulator driver"
  	depends on MFD_MC13XXX
  	select REGULATOR_MC13XXX_CORE
  	help
  	  Say y here to support the regulators found on the Freescale MC13892
  	  PMIC.
  
  config REGULATOR_PALMAS
  	tristate "TI Palmas PMIC Regulators"
  	depends on MFD_PALMAS
  	help
  	  If you wish to control the regulators on the Palmas series of
  	  chips say Y here. This will enable support for all the software
  	  controllable SMPS/LDO regulators.
  
  	  The regulators available on Palmas series chips vary depending
  	  on the muxing. This is handled automatically in the driver by
  	  reading the mux info from OTP.
  
  config REGULATOR_PCAP
  	tristate "Motorola PCAP2 regulator driver"
  	depends on EZX_PCAP
  	help
  	 This driver provides support for the voltage regulators of the
  	 PCAP2 PMIC.
  
  config REGULATOR_PCF50633
  	tristate "NXP PCF50633 regulator driver"
  	depends on MFD_PCF50633
  	help
  	 Say Y here to support the voltage regulators and convertors
  	 on PCF50633
  
  config REGULATOR_PFUZE100
  	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  Say y here to support the regulators found on the Freescale
  	  PFUZE100/PFUZE200 PMIC.
  
  config REGULATOR_RC5T583
  	tristate "RICOH RC5T583 Power regulators"
  	depends on MFD_RC5T583
  	help
  	  Select this option to enable the power regulator of RICOH
  	  PMIC RC5T583.
  	  This driver supports the control of different power rails of device
  	  through regulator interface. The device supports multiple DCDC/LDO
  	  outputs which can be controlled by i2c communication.
  
  config REGULATOR_S2MPS11
  	tristate "Samsung S2MPS11 voltage regulator"
  	depends on MFD_SEC_CORE
  	help
  	 This driver supports a Samsung S2MPS11 voltage output regulator
  	 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
  	 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
  
  config REGULATOR_S5M8767
  	tristate "Samsung S5M8767A voltage regulator"
  	depends on MFD_SEC_CORE
  	help
  	 This driver supports a Samsung S5M8767A voltage output regulator
  	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
  	 supports DVS mode with 8bits of output voltage control.
  
  config REGULATOR_TI_ABB
  	tristate "TI Adaptive Body Bias on-chip LDO"
  	depends on ARCH_OMAP
  	help
  	  Select this option to support Texas Instruments' on-chip Adaptive Body
  	  Bias (ABB) LDO regulators. It is recommended that this option be
  	  enabled on required TI SoC. Certain Operating Performance Points
  	  on TI SoCs may be unstable without enabling this as it provides
  	  device specific optimized bias to allow/optimize functionality.
  
  config REGULATOR_STW481X_VMMC
  	bool "ST Microelectronics STW481X VMMC regulator"
  	depends on MFD_STW481X
  	default y if MFD_STW481X
  	help
  	  This driver supports the internal VMMC regulator in the STw481x
  	  PMIC chips.
  
  config REGULATOR_TPS51632
  	tristate "TI TPS51632 Power Regulator"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver supports TPS51632 voltage regulator chip.
  	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
  	  with Serial VID control and DVFS.
  	  The voltage output can be configure through I2C interface or PWM
  	  interface.
  
  config REGULATOR_TPS6105X
  	tristate "TI TPS6105X Power regulators"
  	depends on TPS6105X
  	default y if TPS6105X
  	help
  	  This driver supports TPS61050/TPS61052 voltage regulator chips.
  	  It is a single boost converter primarily for white LEDs and
  	  audio amplifiers.
  
  config REGULATOR_TPS62360
  	tristate "TI TPS6236x Power Regulator"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver supports TPS6236x voltage regulator chip. This
  	  regulator is meant for processor core supply. This chip is
  	  high-frequency synchronous step down dc-dc converter optimized
  	  for battery-powered portable applications.
  
  config REGULATOR_TPS65023
  	tristate "TI TPS65023 Power regulators"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
  	  three step-down converters and two general-purpose LDO voltage regulators.
  	  It supports TI's software based Class-2 SmartReflex implementation.
  
  config REGULATOR_TPS6507X
  	tristate "TI TPS6507X Power regulators"
  	depends on I2C
  	help
  	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
  	  three step-down converters and two general-purpose LDO voltage regulators.
  	  It supports TI's software based Class-2 SmartReflex implementation.
  
  config REGULATOR_TPS65090
  	tristate "TI TPS65090 Power regulator"
  	depends on MFD_TPS65090
  	help
  	  This driver provides support for the voltage regulators on the
  	  TI TPS65090 PMIC.
  
  config REGULATOR_TPS65217
  	tristate "TI TPS65217 Power regulators"
  	depends on MFD_TPS65217
  	help
  	  This driver supports TPS65217 voltage regulator chips. TPS65217
  	  provides three step-down converters and four general-purpose LDO
  	  voltage regulators. It supports software based voltage control
  	  for different voltage domains
  
  config REGULATOR_TPS6524X
  	tristate "TI TPS6524X Power regulators"
  	depends on SPI
  	help
  	  This driver supports TPS6524X voltage regulator chips. TPS6524X
  	  provides three step-down converters and two general-purpose LDO
  	  voltage regulators.  This device is interfaced using a customized
  	  serial interface currently supported on the sequencer serial
  	  port controller.
  
  config REGULATOR_TPS6586X
  	tristate "TI TPS6586X Power regulators"
  	depends on MFD_TPS6586X
  	help
  	  This driver supports TPS6586X voltage regulator chips.
  
  config REGULATOR_TPS65910
  	tristate "TI TPS65910/TPS65911 Power Regulators"
  	depends on MFD_TPS65910
  	help
  	  This driver supports TPS65910/TPS65911 voltage regulator chips.
  
  config REGULATOR_TPS65912
  	tristate "TI TPS65912 Power regulator"
  	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
  	help
  	    This driver supports TPS65912 voltage regulator chip.
  
  config REGULATOR_TPS80031
  	tristate "TI TPS80031/TPS80032 power regualtor driver"
  	depends on MFD_TPS80031
  	help
  	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
  	  Path and Battery Charger. It has 5 configurable step-down
  	  converters, 11 general purpose LDOs, VBUS generator and digital
  	  output to control regulators.
  
  config REGULATOR_TWL4030
  	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
  	depends on TWL4030_CORE
  	help
  	  This driver supports the voltage regulators provided by
  	  this family of companion chips.
  
  config REGULATOR_VEXPRESS
  	tristate "Versatile Express regulators"
  	depends on VEXPRESS_CONFIG
  	help
  	  This driver provides support for voltage regulators available
  	  on the ARM Ltd's Versatile Express platform.
  
  config REGULATOR_WM831X
  	tristate "Wolfson Microelectronics WM831x PMIC regulators"
  	depends on MFD_WM831X
  	help
  	  Support the voltage and current regulators of the WM831x series
  	  of PMIC devices.
  
  config REGULATOR_WM8350
  	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
  	depends on MFD_WM8350
  	help
  	  This driver provides support for the voltage and current regulators
  	  of the WM8350 AudioPlus PMIC.
  
  config REGULATOR_WM8400
  	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
  	depends on MFD_WM8400
  	help
  	  This driver provides support for the voltage regulators of the
  	  WM8400 AudioPlus PMIC.
  
  config REGULATOR_WM8994
  	tristate "Wolfson Microelectronics WM8994 CODEC"
  	depends on MFD_WM8994
  	help
  	  This driver provides support for the voltage regulators on the
  	  WM8994 CODEC.
  
  endif