Blame view

bootloader/u-boot_2015_04/doc/README.marubun-pcmcia 2.02 KB
6b13f685e   김민수   BSP 최초 추가
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
  
  U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
  	Last update 21/11/2007 by Nobuhiro Iwamatsu
  
  ========================================================================================
  
  0. What's this?
      This driver supports MARUBUN MR-SHPC-01.
  	url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
  	(Sorry Japanese only.)
  
      This chip is used with SuperH well, and adopted by the
      reference board.
  	ex. * MS7750SE01
  		* MS7722SE01
  		* other
  
      This chip doesn't support CardBus.
  
  1. base source code
      The code is based on sources from the Linux kernel
  	( arch/sh/kernel/cf-enabler.c ).
  
  2. How to use
      The options you have to specify in the config file are (with the
      value for my board as an example):
  
      * CONFIG_MARUBUN_PCCARD
  	If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
  	ex.	#define CONFIG_MARUBUN_PCCARD
  
      * CONFIG_PCMCIA_SLOT_A
  	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
  	ex.	#define CONFIG_PCMCIA_SLOT_A    1
  
      * CONFIG_SYS_MARUBUN_MRSHPC
  	This is MR-SHPC-01 PCMCIA controler base address.
  	You should do the setting matched to your environment.
  	ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
  	     ( for MS7722SE01 environment )
  
      * CONFIG_SYS_MARUBUN_MW1
  	This is MR-SHPC-01 memory window base address.
  	You should do the setting matched to your environment.
  	ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
  	     ( for MS7722SE01 environment )
  
      * CONFIG_SYS_MARUBUN_MW1
  	This is MR-SHPC-01 attribute window base address.
  	You should do the setting matched to your environment.
  	ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
  	     ( for MS7722SE01 environment )
  
      * CONFIG_SYS_MARUBUN_MW1
  	This is MR-SHPC-01 I/O window base address.
  	You should do the setting matched to your environment.
  	ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
  	     ( for MS7722SE01 environment )
  
  3. Other
      * Check Compact Flash only.
      * Maybe, NE2000 compatible NIC is sure to move.
  
  Copyright (c) 2007
  	Nobuhiro Iwamatsu <iwamatsu@nigaur.org>