# Copyright 2008 Openmoko, Inc.
  #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
  #
  # Licensed under GPLv2
  
  if ARCH_S3C64XX
  
  # Configuration options for the S3C6410 CPU
  
  config CPU_S3C6400
  	bool
  	help
  	  Enable S3C6400 CPU support
  
  config CPU_S3C6410
  	bool
  	help
  	  Enable S3C6410 CPU support
  
  config S3C64XX_PL080
  	bool "S3C64XX DMA using generic PL08x driver"
  	select AMBA_PL08X
  	select SAMSUNG_DMADEV
  
  config S3C64XX_SETUP_SDHCI
  	bool
  	select S3C64XX_SETUP_SDHCI_GPIO
  	help
  	  Internal configuration for default SDHCI setup for S3C6400 and
  	  S3C6410 SoCs.
  
  config S3C64XX_DEV_ONENAND1
  	bool
  	help
  	  Compile in platform device definition for OneNAND1 controller
  
  # platform specific device setup
  
  config S3C64XX_SETUP_I2C0
  	bool
  	default y
  	help
  	  Common setup code for i2c bus 0.
  
  	  Note, currently since i2c0 is always compiled, this setup helper
  	  is always compiled with it.
  
  config S3C64XX_SETUP_I2C1
  	bool
  	help
  	  Common setup code for i2c bus 1.
  
  config S3C64XX_SETUP_IDE
  	bool
  	help
  	  Common setup code for S3C64XX IDE.
  
  config S3C64XX_SETUP_FB_24BPP
  	bool
  	help
  	  Common setup code for S3C64XX with an 24bpp RGB display helper.
  
  config S3C64XX_SETUP_KEYPAD
  	bool
  	help
  	  Common setup code for S3C64XX KEYPAD GPIO configurations
  
  config S3C64XX_SETUP_SDHCI_GPIO
  	bool
  	help
  	  Common setup code for S3C64XX SDHCI GPIO configurations
  
  config S3C64XX_SETUP_SPI
  	bool
  	help
  	 Common setup code for SPI GPIO configurations
  
  config S3C64XX_SETUP_USB_PHY
  	bool
  	help
  	  Common setup code for USB PHY controller
  
  # S36400 Macchine support
  
  config MACH_SMDK6400
         bool "SMDK6400"
  	select CPU_S3C6400
  	select S3C64XX_SETUP_SDHCI
  	select S3C_DEV_HSMMC
  	select S3C_DEV_NAND
  	help
  	  Machine support for the Samsung SMDK6400
  
  # S3C6410 machine support
  
  config MACH_ANW6410
  	bool "A&W6410"
  	select CPU_S3C6410
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C_DEV_FB
  	help
  	  Machine support for the A&W6410
  
  config MACH_MINI6410
  	bool "MINI6410"
  	select CPU_S3C6410
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C64XX_SETUP_SDHCI
  	select S3C_DEV_FB
  	select S3C_DEV_HSMMC
  	select S3C_DEV_HSMMC1
  	select S3C_DEV_NAND
  	select S3C_DEV_USB_HOST
  	select SAMSUNG_DEV_ADC
  	select SAMSUNG_DEV_TS
  	help
  	  Machine support for the FriendlyARM MINI6410
  
  config MACH_REAL6410
  	bool "REAL6410"
  	select CPU_S3C6410
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C64XX_SETUP_SDHCI
  	select S3C_DEV_FB
  	select S3C_DEV_HSMMC
  	select S3C_DEV_HSMMC1
  	select S3C_DEV_NAND
  	select S3C_DEV_USB_HOST
  	select SAMSUNG_DEV_ADC
  	select SAMSUNG_DEV_TS
  	help
  	  Machine support for the CoreWind REAL6410
  
  config MACH_SMDK6410
  	bool "SMDK6410"
  	select CPU_S3C6410
  	select HAVE_S3C2410_WATCHDOG if WATCHDOG
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C64XX_SETUP_I2C1
  	select S3C64XX_SETUP_IDE
  	select S3C64XX_SETUP_KEYPAD
  	select S3C64XX_SETUP_SDHCI
  	select S3C64XX_SETUP_USB_PHY
  	select S3C_DEV_FB
  	select S3C_DEV_HSMMC
  	select S3C_DEV_HSMMC1
  	select S3C_DEV_I2C1
  	select S3C_DEV_RTC
  	select S3C_DEV_USB_HOST
  	select S3C_DEV_USB_HSOTG
  	select S3C_DEV_WDT
  	select SAMSUNG_DEV_ADC
  	select SAMSUNG_DEV_BACKLIGHT
  	select SAMSUNG_DEV_IDE
  	select SAMSUNG_DEV_KEYPAD
  	select SAMSUNG_DEV_PWM
  	select SAMSUNG_DEV_TS
  	help
  	  Machine support for the Samsung SMDK6410
  
  # At least some of the SMDK6410s were shipped with the card detect
  # for the MMC/SD slots connected to the same input. This means that
  # either the boards need to be altered to have channel0 to an alternate
  # configuration or that only one slot can be used.
  
  choice
  	prompt "SMDK6410 MMC/SD slot setup"
  	depends on MACH_SMDK6410
  
  config SMDK6410_SD_CH0
  	bool "Use channel 0 only"
  	depends on MACH_SMDK6410
  	help
            Select CON7 (channel 0) as the MMC/SD slot, as
  	  at least some SMDK6410 boards come with the
  	  resistors fitted so that the card detects for
  	  channels 0 and 1 are the same.
  
  config SMDK6410_SD_CH1
  	bool "Use channel 1 only"
  	depends on MACH_SMDK6410
  	help
            Select CON6 (channel 1) as the MMC/SD slot, as
  	  at least some SMDK6410 boards come with the
  	  resistors fitted so that the card detects for
  	  channels 0 and 1 are the same.
  
  endchoice
  
  config SMDK6410_WM1190_EV1
  	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
  	depends on MACH_SMDK6410
  	select MFD_WM8350_I2C
  	select REGULATOR
  	select REGULATOR_WM8350
  	help
  	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
  	  and audio daughtercard for the Samsung SMDK6410 reference
  	  platform.  Enabling this option will build support for this
  	  module into the kernel.  The presence of the module will be
  	  detected at runtime so the resulting kernel can be used
  	  with or without the 1190-EV1 fitted.
  
  config SMDK6410_WM1192_EV1
  	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
  	depends on MACH_SMDK6410
  	select MFD_WM831X
  	select MFD_WM831X_I2C
  	select REGULATOR
  	select REGULATOR_WM831X
  	help
  	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
  	  daughtercard for the Samsung SMDK6410 reference platform.
  	  Enabling this option will build support for this module into
  	  the kernel.  The presence of the daughtercard will be
  	  detected at runtime so the resulting kernel can be used
  	  with or without the 1192-EV1 fitted.
  
  config MACH_NCP
  	bool "NCP"
  	select CPU_S3C6410
  	select S3C64XX_SETUP_I2C1
  	select S3C_DEV_HSMMC1
  	select S3C_DEV_I2C1
  	help
            Machine support for the Samsung NCP
  
  config MACH_HMT
  	bool "Airgoo HMT"
  	select CPU_S3C6410
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C_DEV_FB
  	select S3C_DEV_NAND
  	select S3C_DEV_USB_HOST
  	select SAMSUNG_DEV_PWM
  	help
  	  Machine support for the Airgoo HMT
  
  config MACH_SMARTQ
  	bool
  	select CPU_S3C6410
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C64XX_SETUP_SDHCI
  	select S3C64XX_SETUP_USB_PHY
  	select S3C_DEV_FB
  	select S3C_DEV_HSMMC
  	select S3C_DEV_HSMMC1
  	select S3C_DEV_HSMMC2
  	select S3C_DEV_HWMON
  	select S3C_DEV_RTC
  	select S3C_DEV_USB_HOST
  	select S3C_DEV_USB_HSOTG
  	select SAMSUNG_DEV_ADC
  	select SAMSUNG_DEV_PWM
  	select SAMSUNG_DEV_TS
  	help
  	    Shared machine support for SmartQ 5/7
  
  config MACH_SMARTQ5
  	bool "SmartQ 5"
  	select MACH_SMARTQ
  	help
  	    Machine support for the SmartQ 5
  
  config MACH_SMARTQ7
  	bool "SmartQ 7"
  	select MACH_SMARTQ
  	help
  	    Machine support for the SmartQ 7
  
  config MACH_WLF_CRAGG_6410
  	bool "Wolfson Cragganmore 6410"
  	select CPU_S3C6410
  	select I2C
  	select LEDS_GPIO_REGISTER
  	select S3C64XX_DEV_SPI0
  	select S3C64XX_SETUP_FB_24BPP
  	select S3C64XX_SETUP_I2C1
  	select S3C64XX_SETUP_IDE
  	select S3C64XX_SETUP_KEYPAD
  	select S3C64XX_SETUP_SDHCI
  	select S3C64XX_SETUP_SPI
  	select S3C64XX_SETUP_USB_PHY
  	select S3C_DEV_FB
  	select S3C_DEV_HSMMC
  	select S3C_DEV_HSMMC1
  	select S3C_DEV_HSMMC2
  	select S3C_DEV_I2C1
  	select S3C_DEV_RTC
  	select S3C_DEV_USB_HOST
  	select S3C_DEV_USB_HSOTG
  	select S3C_DEV_WDT
  	select SAMSUNG_DEV_ADC
  	select SAMSUNG_DEV_KEYPAD
  	select SAMSUNG_DEV_PWM
  	help
  	  Machine support for the Wolfson Cragganmore S3C6410 variant.
  
  config MACH_S3C64XX_DT
  	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
  	select CLKSRC_OF
  	select CPU_S3C6400
  	select CPU_S3C6410
  	select PINCTRL
  	select PINCTRL_S3C64XX
  	select USE_OF
  	help
  	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
  	  enabled.
  	  Select this if a fdt blob is available for your S3C64XX SoC based
  	  board.
  	  Note: This is under development and not all peripherals can be
  	  supported with this machine file.
  
  endif