source "arch/powerpc/platforms/Kconfig.cputype"
  
  config PPC32
  	bool
  	default y if !PPC64
  
  config 32BIT
  	bool
  	default y if PPC32
  
  config 64BIT
  	bool
  	default y if PPC64
  
  config WORD_SIZE
  	int
  	default 64 if PPC64
  	default 32 if !PPC64
  
  config ARCH_PHYS_ADDR_T_64BIT
         def_bool PPC64 || PHYS_64BIT
  
  config ARCH_DMA_ADDR_T_64BIT
  	def_bool ARCH_PHYS_ADDR_T_64BIT
  
  config MMU
  	bool
  	default y
  
  config HAVE_SETUP_PER_CPU_AREA
  	def_bool PPC64
  
  config NEED_PER_CPU_EMBED_FIRST_CHUNK
  	def_bool PPC64
  
  config NR_IRQS
  	int "Number of virtual interrupt numbers"
  	range 32 32768
  	default "512"
  	help
  	  This defines the number of virtual interrupt numbers the kernel
  	  can manage. Virtual interrupt numbers are what you see in
  	  /proc/interrupts. If you configure your system to have too few,
  	  drivers will fail to load or worse - handle with care.
  
  config STACKTRACE_SUPPORT
  	bool
  	default y
  
  config HAVE_LATENCYTOP_SUPPORT
  	def_bool y
  
  config TRACE_IRQFLAGS_SUPPORT
  	bool
  	default y
  
  config LOCKDEP_SUPPORT
  	bool
  	default y
  
  config RWSEM_GENERIC_SPINLOCK
  	bool
  
  config RWSEM_XCHGADD_ALGORITHM
  	bool
  	default y
  
  config GENERIC_LOCKBREAK
  	bool
  	default y
  	depends on SMP && PREEMPT
  
  config ARCH_HAS_ILOG2_U32
  	bool
  	default y
  
  config ARCH_HAS_ILOG2_U64
  	bool
  	default y if 64BIT
  
  config GENERIC_HWEIGHT
  	bool
  	default y
  
  config PPC
  	bool
  	default y
  	select ARCH_MIGHT_HAVE_PC_PARPORT
  	select ARCH_MIGHT_HAVE_PC_SERIO
  	select BINFMT_ELF
  	select OF
  	select OF_EARLY_FLATTREE
  	select HAVE_FTRACE_MCOUNT_RECORD
  	select HAVE_DYNAMIC_FTRACE
  	select HAVE_FUNCTION_TRACER
  	select HAVE_FUNCTION_GRAPH_TRACER
  	select SYSCTL_EXCEPTION_TRACE
  	select ARCH_WANT_OPTIONAL_GPIOLIB
  	select VIRT_TO_BUS if !PPC64
  	select HAVE_IDE
  	select HAVE_IOREMAP_PROT
  	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_LITTLE_ENDIAN
  	select HAVE_KPROBES
  	select HAVE_ARCH_KGDB
  	select HAVE_KRETPROBES
  	select HAVE_ARCH_TRACEHOOK
  	select HAVE_MEMBLOCK
  	select HAVE_MEMBLOCK_NODE_MAP
  	select HAVE_DMA_ATTRS
  	select HAVE_DMA_API_DEBUG
  	select HAVE_OPROFILE
  	select HAVE_DEBUG_KMEMLEAK
  	select GENERIC_ATOMIC64 if PPC32
  	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
  	select HAVE_PERF_EVENTS
  	select HAVE_REGS_AND_STACK_ACCESS_API
  	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
  	select ARCH_WANT_IPC_PARSE_VERSION
  	select SPARSE_IRQ
  	select IRQ_DOMAIN
  	select GENERIC_IRQ_SHOW
  	select GENERIC_IRQ_SHOW_LEVEL
  	select IRQ_FORCED_THREADING
  	select HAVE_RCU_TABLE_FREE if SMP
  	select HAVE_SYSCALL_TRACEPOINTS
  	select HAVE_BPF_JIT if PPC64
  	select HAVE_ARCH_JUMP_LABEL
  	select ARCH_HAVE_NMI_SAFE_CMPXCHG
  	select GENERIC_SMP_IDLE_THREAD
  	select GENERIC_CMOS_UPDATE
  	select GENERIC_TIME_VSYSCALL_OLD
  	select GENERIC_CLOCKEVENTS
  	select GENERIC_STRNCPY_FROM_USER
  	select GENERIC_STRNLEN_USER
  	select HAVE_MOD_ARCH_SPECIFIC
  	select MODULES_USE_ELF_RELA
  	select CLONE_BACKWARDS
  	select ARCH_USE_BUILTIN_BSWAP
  	select OLD_SIGSUSPEND
  	select OLD_SIGACTION if PPC32
  	select HAVE_DEBUG_STACKOVERFLOW
  	select HAVE_IRQ_EXIT_ON_IRQ_STACK
  	select ARCH_USE_CMPXCHG_LOCKREF if PPC64
  	select ARCH_SUPPORTS_ATOMIC_RMW
  
  config GENERIC_CSUM
  	def_bool CPU_LITTLE_ENDIAN
  
  config EARLY_PRINTK
  	bool
  	default y
  
  config PANIC_TIMEOUT
  	int
  	default 180
  
  config COMPAT
  	bool
  	default y if PPC64
  	select COMPAT_BINFMT_ELF
  	select ARCH_WANT_OLD_COMPAT_IPC
  	select COMPAT_OLD_SIGACTION
  
  config SYSVIPC_COMPAT
  	bool
  	depends on COMPAT && SYSVIPC
  	default y
  
  # All PPC32s use generic nvram driver through ppc_md
  config GENERIC_NVRAM
  	bool
  	default y if PPC32
  
  config SCHED_OMIT_FRAME_POINTER
  	bool
  	default y
  
  config ARCH_MAY_HAVE_PC_FDC
  	bool
  	default !PPC_PSERIES || PCI
  
  config PPC_OF
  	def_bool y
  
  config PPC_UDBG_16550
  	bool
  	default n
  
  config GENERIC_TBSYNC
  	bool
  	default y if PPC32 && SMP
  	default n
  
  config AUDIT_ARCH
  	bool
  	default y
  
  config GENERIC_BUG
  	bool
  	default y
  	depends on BUG
  
  config SYS_SUPPORTS_APM_EMULATION
  	default y if PMAC_APM_EMU
  	bool
  
  config EPAPR_BOOT
  	bool
  	help
  	  Used to allow a board to specify it wants an ePAPR compliant wrapper.
  	default n
  
  config DEFAULT_UIMAGE
  	bool
  	help
  	  Used to allow a board to specify it wants a uImage built by default
  	default n
  
  config ARCH_HIBERNATION_POSSIBLE
  	bool
  	default y
  
  config ARCH_SUSPEND_POSSIBLE
  	def_bool y
  	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
  		   (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
  		   || 44x || 40x
  
  config PPC_DCR_NATIVE
  	bool
  	default n
  
  config PPC_DCR_MMIO
  	bool
  	default n
  
  config PPC_DCR
  	bool
  	depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
  	default y
  
  config PPC_OF_PLATFORM_PCI
  	bool
  	depends on PCI
  	depends on PPC64 # not supported on 32 bits yet
  	default n
  
  config ARCH_SUPPORTS_DEBUG_PAGEALLOC
  	def_bool y
  
  config ARCH_SUPPORTS_UPROBES
  	def_bool y
  
  config PPC_ADV_DEBUG_REGS
  	bool
  	depends on 40x || BOOKE
  	default y
  
  config PPC_ADV_DEBUG_IACS
  	int
  	depends on PPC_ADV_DEBUG_REGS
  	default 4 if 44x
  	default 2
  
  config PPC_ADV_DEBUG_DACS
  	int
  	depends on PPC_ADV_DEBUG_REGS
  	default 2
  
  config PPC_ADV_DEBUG_DVCS
  	int
  	depends on PPC_ADV_DEBUG_REGS
  	default 2 if 44x
  	default 0
  
  config PPC_ADV_DEBUG_DAC_RANGE
  	bool
  	depends on PPC_ADV_DEBUG_REGS && 44x
  	default y
  
  config PPC_EMULATE_SSTEP
  	bool
  	default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT
  
  source "init/Kconfig"
  
  source "kernel/Kconfig.freezer"
  
  source "arch/powerpc/sysdev/Kconfig"
  source "arch/powerpc/platforms/Kconfig"
  
  menu "Kernel options"
  
  config HIGHMEM
  	bool "High memory support"
  	depends on PPC32
  
  source kernel/Kconfig.hz
  source kernel/Kconfig.preempt
  source "fs/Kconfig.binfmt"
  
  config HUGETLB_PAGE_SIZE_VARIABLE
  	bool
  	depends on HUGETLB_PAGE
  	default y
  
  config MATH_EMULATION
  	bool "Math emulation"
  	depends on 4xx || 8xx || PPC_MPC832x || BOOKE
  	---help---
  	  Some PowerPC chips designed for embedded applications do not have
  	  a floating-point unit and therefore do not implement the
  	  floating-point instructions in the PowerPC instruction set.  If you
  	  say Y here, the kernel will include code to emulate a floating-point
  	  unit, which will allow programs that use floating-point
  	  instructions to run.
  
  	  This is also useful to emulate missing (optional) instructions
  	  such as fsqrt on cores that do have an FPU but do not implement
  	  them (such as Freescale BookE).
  
  choice
  	prompt "Math emulation options"
  	default MATH_EMULATION_FULL
  	depends on MATH_EMULATION
  
  config	MATH_EMULATION_FULL
  	bool "Emulate all the floating point instructions"
  	---help---
  	  Select this option will enable the kernel to support to emulate
  	  all the floating point instructions. If your SoC doesn't have
  	  a FPU, you should select this.
  
  config MATH_EMULATION_HW_UNIMPLEMENTED
  	bool "Just emulate the FPU unimplemented instructions"
  	---help---
  	  Select this if you know there does have a hardware FPU on your
  	  SoC, but some floating point instructions are not implemented by that.
  
  endchoice
  
  config PPC_TRANSACTIONAL_MEM
         bool "Transactional Memory support for POWERPC"
         depends on PPC_BOOK3S_64
         depends on SMP
         select ALTIVEC
         select VSX
         default n
         ---help---
           Support user-mode Transactional Memory on POWERPC.
  
  config IOMMU_HELPER
  	def_bool PPC64
  
  config SWIOTLB
  	bool "SWIOTLB support"
  	default n
  	select IOMMU_HELPER
  	---help---
  	  Support for IO bounce buffering for systems without an IOMMU.
  	  This allows us to DMA to the full physical address space on
  	  platforms where the size of a physical address is larger
  	  than the bus address.  Not all platforms support this.
  
  config HOTPLUG_CPU
  	bool "Support for enabling/disabling CPUs"
  	depends on SMP && (PPC_PSERIES || \
  	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
  	---help---
  	  Say Y here to be able to disable and re-enable individual
  	  CPUs at runtime on SMP machines.
  
  	  Say N if you are unsure.
  
  config ARCH_CPU_PROBE_RELEASE
  	def_bool y
  	depends on HOTPLUG_CPU
  
  config ARCH_ENABLE_MEMORY_HOTPLUG
  	def_bool y
  
  config ARCH_HAS_WALK_MEMORY
  	def_bool y
  
  config ARCH_ENABLE_MEMORY_HOTREMOVE
  	def_bool y
  
  config PPC64_SUPPORTS_MEMORY_FAILURE
  	bool "Add support for memory hwpoison"
  	depends on PPC_BOOK3S_64
  	default "y" if PPC_POWERNV
  	select ARCH_SUPPORTS_MEMORY_FAILURE
  
  config KEXEC
  	bool "kexec system call"
  	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
  	help
  	  kexec is a system call that implements the ability to shutdown your
  	  current kernel, and to start another kernel.  It is like a reboot
  	  but it is independent of the system firmware.   And like a reboot
  	  you can start any kernel with it, not just Linux.
  
  	  The name comes from the similarity to the exec system call.
  
  	  It is an ongoing process to be certain the hardware in a machine
  	  is properly shutdown, so do not be surprised if this code does not
  	  initially work for you.  As of this writing the exact hardware
  	  interface is strongly in flux, so no good recommendation can be
  	  made.
  
  config CRASH_DUMP
  	bool "Build a kdump crash kernel"
  	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
  	select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE
  	help
  	  Build a kernel suitable for use as a kdump capture kernel.
  	  The same kernel binary can be used as production kernel and dump
  	  capture kernel.
  
  config FA_DUMP
  	bool "Firmware-assisted dump"
  	depends on PPC64 && PPC_RTAS && CRASH_DUMP && KEXEC
  	help
  	  A robust mechanism to get reliable kernel crash dump with
  	  assistance from firmware. This approach does not use kexec,
  	  instead firmware assists in booting the kdump kernel
  	  while preserving memory contents. Firmware-assisted dump
  	  is meant to be a kdump replacement offering robustness and
  	  speed not possible without system firmware assistance.
  
  	  If unsure, say "N"
  
  config IRQ_ALL_CPUS
  	bool "Distribute interrupts on all CPUs by default"
  	depends on SMP
  	help
  	  This option gives the kernel permission to distribute IRQs across
  	  multiple CPUs.  Saying N here will route all IRQs to the first
  	  CPU.  Generally saying Y is safe, although some problems have been
  	  reported with SMP Power Macintoshes with this option enabled.
  
  config NUMA
  	bool "NUMA support"
  	depends on PPC64
  	default y if SMP && PPC_PSERIES
  
  config NODES_SHIFT
  	int
  	default "8" if PPC64
  	default "4"
  	depends on NEED_MULTIPLE_NODES
  
  config ARCH_SELECT_MEMORY_MODEL
  	def_bool y
  	depends on PPC64
  
  config ARCH_FLATMEM_ENABLE
  	def_bool y
  	depends on (PPC64 && !NUMA) || PPC32
  
  config ARCH_SPARSEMEM_ENABLE
  	def_bool y
  	depends on PPC64
  	select SPARSEMEM_VMEMMAP_ENABLE
  
  config ARCH_SPARSEMEM_DEFAULT
  	def_bool y
  	depends on (SMP && PPC_PSERIES) || PPC_PS3
  
  config SYS_SUPPORTS_HUGETLBFS
  	bool
  
  source "mm/Kconfig"
  
  config ARCH_MEMORY_PROBE
  	def_bool y
  	depends on MEMORY_HOTPLUG
  
  # Some NUMA nodes have memory ranges that span
  # other nodes.  Even though a pfn is valid and
  # between a node's start and end pfns, it may not
  # reside on that node.  See memmap_init_zone()
  # for details.
  config NODES_SPAN_OTHER_NODES
  	def_bool y
  	depends on NEED_MULTIPLE_NODES
  
  config PPC_HAS_HASH_64K
  	bool
  	depends on PPC64
  	default n
  
  config STDBINUTILS
  	bool "Using standard binutils settings"
  	depends on 44x
  	default y
  	help
  	  Turning this option off allows you to select 256KB PAGE_SIZE on 44x.
  	  Note, that kernel will be able to run only those applications,
  	  which had been compiled using binutils later than 2.17.50.0.3 with
  	  '-zmax-page-size' set to 256K (the default is 64K). Or, if using
  	  the older binutils, you can patch them with a trivial patch, which
  	  changes the ELF_MAXPAGESIZE definition from 0x10000 to 0x40000.
  
  choice
  	prompt "Page size"
  	default PPC_4K_PAGES
  	help
  	  Select the kernel logical page size. Increasing the page size
  	  will reduce software overhead at each page boundary, allow
  	  hardware prefetch mechanisms to be more effective, and allow
  	  larger dma transfers increasing IO efficiency and reducing
  	  overhead. However the utilization of memory will increase.
  	  For example, each cached file will using a multiple of the
  	  page size to hold its contents and the difference between the
  	  end of file and the end of page is wasted.
  
  	  Some dedicated systems, such as software raid serving with
  	  accelerated calculations, have shown significant increases.
  
  	  If you configure a 64 bit kernel for 64k pages but the
  	  processor does not support them, then the kernel will simulate
  	  them with 4k pages, loading them on demand, but with the
  	  reduced software overhead and larger internal fragmentation.
  	  For the 32 bit kernel, a large page option will not be offered
  	  unless it is supported by the configured processor.
  
  	  If unsure, choose 4K_PAGES.
  
  config PPC_4K_PAGES
  	bool "4k page size"
  
  config PPC_16K_PAGES
  	bool "16k page size" if 44x
  
  config PPC_64K_PAGES
  	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
  	depends on !PPC_FSL_BOOK3E
  	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
  
  config PPC_256K_PAGES
  	bool "256k page size" if 44x
  	depends on !STDBINUTILS
  	help
  	  Make the page size 256k.
  
  	  As the ELF standard only requires alignment to support page
  	  sizes up to 64k, you will need to compile all of your user
  	  space applications with a non-standard binutils settings
  	  (see the STDBINUTILS description for details).
  
  	  Say N unless you know what you are doing.
  
  endchoice
  
  config FORCE_MAX_ZONEORDER
  	int "Maximum zone order"
  	range 9 64 if PPC64 && PPC_64K_PAGES
  	default "9" if PPC64 && PPC_64K_PAGES
  	range 13 64 if PPC64 && !PPC_64K_PAGES
  	default "13" if PPC64 && !PPC_64K_PAGES
  	range 9 64 if PPC32 && PPC_16K_PAGES
  	default "9" if PPC32 && PPC_16K_PAGES
  	range 7 64 if PPC32 && PPC_64K_PAGES
  	default "7" if PPC32 && PPC_64K_PAGES
  	range 5 64 if PPC32 && PPC_256K_PAGES
  	default "5" if PPC32 && PPC_256K_PAGES
  	range 11 64
  	default "11"
  	help
  	  The kernel memory allocator divides physically contiguous memory
  	  blocks into "zones", where each zone is a power of two number of
  	  pages.  This option selects the largest power of two that the kernel
  	  keeps in the memory allocator.  If you need to allocate very large
  	  blocks of physically contiguous memory, then you may need to
  	  increase this value.
  
  	  This config option is actually maximum order plus one. For example,
  	  a value of 11 means that the largest free memory block is 2^10 pages.
  
  	  The page size is not necessarily 4KB.  For example, on 64-bit
  	  systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES.  Keep
  	  this in mind when choosing a value for this option.
  
  config PPC_SUBPAGE_PROT
  	bool "Support setting protections for 4k subpages"
  	depends on PPC_STD_MMU_64 && PPC_64K_PAGES
  	help
  	  This option adds support for a system call to allow user programs
  	  to set access permissions (read/write, readonly, or no access)
  	  on the 4k subpages of each 64k page.
  
  config SCHED_SMT
  	bool "SMT (Hyperthreading) scheduler support"
  	depends on PPC64 && SMP
  	help
  	  SMT scheduler support improves the CPU scheduler's decision making
  	  when dealing with POWER5 cpus at a cost of slightly increased
  	  overhead in some places. If unsure say N here.
  
  config PPC_DENORMALISATION
  	bool "PowerPC denormalisation exception handling"
  	depends on PPC_BOOK3S_64
  	default "y" if PPC_POWERNV
  	---help---
  	  Add support for handling denormalisation of single precision
  	  values.  Useful for bare metal only.  If unsure say Y here.
  
  config CMDLINE_BOOL
  	bool "Default bootloader kernel arguments"
  
  config CMDLINE
  	string "Initial kernel command string"
  	depends on CMDLINE_BOOL
  	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
  	help
  	  On some platforms, there is currently no way for the boot loader to
  	  pass arguments to the kernel. For these platforms, you can supply
  	  some command-line options at build time by entering them here.  In
  	  most cases you will need to specify the root device here.
  
  config EXTRA_TARGETS
  	string "Additional default image types"
  	help
  	  List additional targets to be built by the bootwrapper here (separated
  	  by spaces).  This is useful for targets that depend of device tree
  	  files in the .dts directory.
  
  	  Targets in this list will be build as part of the default build
  	  target, or when the user does a 'make zImage' or a
  	  'make zImage.initrd'.
  
  	  If unsure, leave blank
  
  config ARCH_WANTS_FREEZER_CONTROL
  	def_bool y
  	depends on ADB_PMU
  
  source kernel/power/Kconfig
  
  config SECCOMP
  	bool "Enable seccomp to safely compute untrusted bytecode"
  	depends on PROC_FS
  	default y
  	help
  	  This kernel feature is useful for number crunching applications
  	  that may need to compute untrusted bytecode during their
  	  execution. By using pipes or other transports made available to
  	  the process as file descriptors supporting the read/write
  	  syscalls, it's possible to isolate those applications in
  	  their own address space using seccomp. Once seccomp is
  	  enabled via /proc/<pid>/seccomp, it cannot be disabled
  	  and the task is only allowed to execute a few safe syscalls
  	  defined by each seccomp mode.
  
  	  If unsure, say Y. Only embedded should say N here.
  
  endmenu
  
  config ISA_DMA_API
  	bool
  	default PCI
  
  menu "Bus options"
  
  config ISA
  	bool "Support for ISA-bus hardware"
  	depends on PPC_CHRP
  	select PPC_I8259
  	help
  	  Find out whether you have ISA slots on your motherboard.  ISA is the
  	  name of a bus system, i.e. the way the CPU talks to the other stuff
  	  inside your box.  If you have an Apple machine, say N here; if you
  	  have an IBM RS/6000 or pSeries machine, say Y.  If you have an
  	  embedded board, consult your board documentation.
  
  config ZONE_DMA
  	bool
  	default y
  
  config NEED_DMA_MAP_STATE
  	def_bool (PPC64 || NOT_COHERENT_CACHE)
  
  config NEED_SG_DMA_LENGTH
  	def_bool y
  
  config GENERIC_ISA_DMA
  	bool
  	depends on ISA_DMA_API
  	default y
  
  config PPC_INDIRECT_PCI
  	bool
  	depends on PCI
  	default y if 40x || 44x
  	default n
  
  config EISA
  	bool
  
  config SBUS
  	bool
  
  config FSL_SOC
  	bool
  
  config FSL_PCI
   	bool
  	select PPC_INDIRECT_PCI
  	select PCI_QUIRKS
  
  config FSL_PMC
  	bool
  	default y
  	depends on SUSPEND && (PPC_85xx || PPC_86xx)
  	help
  	  Freescale MPC85xx/MPC86xx power management controller support
  	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
  
  config PPC4xx_CPM
  	bool
  	default y
  	depends on SUSPEND && (44x || 40x)
  	help
  	  PPC4xx Clock Power Management (CPM) support (suspend/resume).
  	  It also enables support for two different idle states (idle-wait
  	  and idle-doze).
  
  config 4xx_SOC
  	bool
  
  config FSL_LBC
  	bool "Freescale Local Bus support"
  	depends on FSL_SOC
  	help
  	  Enables reporting of errors from the Freescale local bus
  	  controller.  Also contains some common code used by
  	  drivers for specific local bus peripherals.
  
  config FSL_IFC
  	bool
          depends on FSL_SOC
  
  config FSL_GTM
  	bool
  	depends on PPC_83xx || QUICC_ENGINE || CPM2
  	help
  	  Freescale General-purpose Timers support
  
  # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
  config MCA
  	bool
  
  # Platforms that what PCI turned unconditionally just do select PCI
  # in their config node.  Platforms that want to choose at config
  # time should select PPC_PCI_CHOICE
  config PPC_PCI_CHOICE
  	bool
  
  config PCI
  	bool "PCI support" if PPC_PCI_CHOICE
  	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
  		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
  	default PCI_QSPAN if !4xx && !CPM2 && 8xx
  	select GENERIC_PCI_IOMAP
  	help
  	  Find out whether your system includes a PCI bus. PCI is the name of
  	  a bus system, i.e. the way the CPU talks to the other stuff inside
  	  your box.  If you say Y here, the kernel will include drivers and
  	  infrastructure code to support PCI bus devices.
  
  config PCI_DOMAINS
  	def_bool PCI
  
  config PCI_SYSCALL
  	def_bool PCI
  
  config PCI_QSPAN
  	bool "QSpan PCI"
  	depends on !4xx && !CPM2 && 8xx
  	select PPC_I8259
  	help
  	  Say Y here if you have a system based on a Motorola 8xx-series
  	  embedded processor with a QSPAN PCI interface, otherwise say N.
  
  config PCI_8260
  	bool
  	depends on PCI && 8260
  	select PPC_INDIRECT_PCI
  	default y
  
  source "drivers/pci/pcie/Kconfig"
  
  source "drivers/pci/Kconfig"
  
  source "drivers/pcmcia/Kconfig"
  
  source "drivers/pci/hotplug/Kconfig"
  
  config HAS_RAPIDIO
  	bool
  	default n
  
  config RAPIDIO
  	tristate "RapidIO support"
  	depends on HAS_RAPIDIO || PCI
  	help
  	  If you say Y here, the kernel will include drivers and
  	  infrastructure code to support RapidIO interconnect devices.
  
  config FSL_RIO
  	bool "Freescale Embedded SRIO Controller support"
  	depends on RAPIDIO = y && HAS_RAPIDIO
  	default "n"
  	---help---
  	  Include support for RapidIO controller on Freescale embedded
  	  processors (MPC8548, MPC8641, etc).
  
  source "drivers/rapidio/Kconfig"
  
  endmenu
  
  config NONSTATIC_KERNEL
  	bool
  	default n
  
  menu "Advanced setup"
  	depends on PPC32
  
  config ADVANCED_OPTIONS
  	bool "Prompt for advanced kernel configuration options"
  	help
  	  This option will enable prompting for a variety of advanced kernel
  	  configuration options.  These options can cause the kernel to not
  	  work if they are set incorrectly, but can be used to optimize certain
  	  aspects of kernel memory management.
  
  	  Unless you know what you are doing, say N here.
  
  comment "Default settings for advanced configuration options are used"
  	depends on !ADVANCED_OPTIONS
  
  config LOWMEM_SIZE_BOOL
  	bool "Set maximum low memory"
  	depends on ADVANCED_OPTIONS
  	help
  	  This option allows you to set the maximum amount of memory which
  	  will be used as "low memory", that is, memory which the kernel can
  	  access directly, without having to set up a kernel virtual mapping.
  	  This can be useful in optimizing the layout of kernel virtual
  	  memory.
  
  	  Say N here unless you know what you are doing.
  
  config LOWMEM_SIZE
  	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
  	default "0x30000000"
  
  config LOWMEM_CAM_NUM_BOOL
  	bool "Set number of CAMs to use to map low memory"
  	depends on ADVANCED_OPTIONS && FSL_BOOKE
  	help
  	  This option allows you to set the maximum number of CAM slots that
  	  will be used to map low memory.  There are a limited number of slots
  	  available and even more limited number that will fit in the L1 MMU.
  	  However, using more entries will allow mapping more low memory.  This
  	  can be useful in optimizing the layout of kernel virtual memory.
  
  	  Say N here unless you know what you are doing.
  
  config LOWMEM_CAM_NUM
  	depends on FSL_BOOKE
  	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
  	default 3
  
  config DYNAMIC_MEMSTART
  	bool "Enable page aligned dynamic load address for kernel"
  	depends on ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
  	select NONSTATIC_KERNEL
  	help
  	  This option enables the kernel to be loaded at any page aligned
  	  physical address. The kernel creates a mapping from KERNELBASE to 
  	  the address where the kernel is loaded. The page size here implies
  	  the TLB page size of the mapping for kernel on the particular platform.
  	  Please refer to the init code for finding the TLB page size.
  
  	  DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
  	  kernel image, where the only restriction is the page aligned kernel
  	  load address. When this option is enabled, the compile time physical 
  	  address CONFIG_PHYSICAL_START is ignored.
  
  	  This option is overridden by CONFIG_RELOCATABLE
  
  config RELOCATABLE
  	bool "Build a relocatable kernel"
  	depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
  	select NONSTATIC_KERNEL
  	help
  	  This builds a kernel image that is capable of running at the
  	  location the kernel is loaded at, without any alignment restrictions.
  	  This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
  
  	  One use is for the kexec on panic case where the recovery kernel
  	  must live at a different physical address than the primary
  	  kernel.
  
  	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
  	  it has been loaded at and the compile time physical addresses
  	  CONFIG_PHYSICAL_START is ignored.  However CONFIG_PHYSICAL_START
  	  setting can still be useful to bootwrappers that need to know the
  	  load address of the kernel (eg. u-boot/mkimage).
  
  config RELOCATABLE_PPC32
  	def_bool y
  	depends on PPC32 && RELOCATABLE
  
  config PAGE_OFFSET_BOOL
  	bool "Set custom page offset address"
  	depends on ADVANCED_OPTIONS
  	help
  	  This option allows you to set the kernel virtual address at which
  	  the kernel will map low memory.  This can be useful in optimizing
  	  the virtual memory layout of the system.
  
  	  Say N here unless you know what you are doing.
  
  config PAGE_OFFSET
  	hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
  	default "0xc0000000"
  
  config KERNEL_START_BOOL
  	bool "Set custom kernel base address"
  	depends on ADVANCED_OPTIONS
  	help
  	  This option allows you to set the kernel virtual address at which
  	  the kernel will be loaded.  Normally this should match PAGE_OFFSET
  	  however there are times (like kdump) that one might not want them
  	  to be the same.
  
  	  Say N here unless you know what you are doing.
  
  config KERNEL_START
  	hex "Virtual address of kernel base" if KERNEL_START_BOOL
  	default PAGE_OFFSET if PAGE_OFFSET_BOOL
  	default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
  	default "0xc0000000"
  
  config PHYSICAL_START_BOOL
  	bool "Set physical address where the kernel is loaded"
  	depends on ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
  	help
  	  This gives the physical address where the kernel is loaded.
  
  	  Say N here unless you know what you are doing.
  
  config PHYSICAL_START
  	hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
  	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
  	default "0x00000000"
  
  config PHYSICAL_ALIGN
  	hex
  	default "0x04000000" if FSL_BOOKE
  	help
  	  This value puts the alignment restrictions on physical address
  	  where kernel is loaded and run from. Kernel is compiled for an
  	  address which meets above alignment restriction.
  
  config TASK_SIZE_BOOL
  	bool "Set custom user task size"
  	depends on ADVANCED_OPTIONS
  	help
  	  This option allows you to set the amount of virtual address space
  	  allocated to user tasks.  This can be useful in optimizing the
  	  virtual memory layout of the system.
  
  	  Say N here unless you know what you are doing.
  
  config TASK_SIZE
  	hex "Size of user task space" if TASK_SIZE_BOOL
  	default "0x80000000" if PPC_8xx
  	default "0xc0000000"
  
  config CONSISTENT_SIZE_BOOL
  	bool "Set custom consistent memory pool size"
  	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
  	help
  	  This option allows you to set the size of the
  	  consistent memory pool.  This pool of virtual memory
  	  is used to make consistent memory allocations.
  
  config CONSISTENT_SIZE
  	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
  	default "0x00200000" if NOT_COHERENT_CACHE
  
  config PIN_TLB
  	bool "Pinned Kernel TLBs (860 ONLY)"
  	depends on ADVANCED_OPTIONS && 8xx
  endmenu
  
  if PPC64
  config RELOCATABLE
  	bool "Build a relocatable kernel"
  	depends on !COMPILE_TEST
  	select NONSTATIC_KERNEL
  	help
  	  This builds a kernel image that is capable of running anywhere
  	  in the RMA (real memory area) at any 16k-aligned base address.
  	  The kernel is linked as a position-independent executable (PIE)
  	  and contains dynamic relocations which are processed early
  	  in the bootup process.
  
  	  One use is for the kexec on panic case where the recovery kernel
  	  must live at a different physical address than the primary
  	  kernel.
  
  # This value must have zeroes in the bottom 60 bits otherwise lots will break
  config PAGE_OFFSET
  	hex
  	default "0xc000000000000000"
  config KERNEL_START
  	hex
  	default "0xc000000000000000"
  config PHYSICAL_START
  	hex
  	default "0x00000000"
  endif
  
  config	ARCH_RANDOM
  	def_bool n
  
  source "net/Kconfig"
  
  source "drivers/Kconfig"
  
  source "fs/Kconfig"
  
  source "arch/powerpc/sysdev/qe_lib/Kconfig"
  
  source "lib/Kconfig"
  
  source "arch/powerpc/Kconfig.debug"
  
  source "security/Kconfig"
  
  config KEYS_COMPAT
  	bool
  	depends on COMPAT && KEYS
  	default y
  
  source "crypto/Kconfig"
  
  config PPC_LIB_RHEAP
  	bool
  
  source "arch/powerpc/kvm/Kconfig"