#include "ovenstatics.h"
  #include <QtDebug>

  #include <QApplication>
  #include <QTimer>

  #include "mainwindow.h"
  #include "ovencontroller.h"
  #include "popupwindow.h"

  #include "engineermenuwindow.h"
  #include "errorpopupdlg.h"

  #include "historylistwindow.h"

  OvenStatistics* OvenStatistics::p_singletonInstance=NULL;

  OvenStatistics* OvenStatistics::getInstance(QObject *parent){

      if(!p_singletonInstance){

          p_singletonInstance = new OvenStatistics(parent);

          p_singletonInstance->udp = UdpHandler::getInstance();
          p_singletonInstance->oven = Oven::getInstance();

          //for singletone event debug

  //        MainWindow* mw = (MainWindow*)parent;
  //        connect(mw->pcombiButton, SIGNAL(clicked()),p_singtonInstance, SLOT(onDataChanged()));

          connect(p_singletonInstance->udp , SIGNAL(changed()), p_singletonInstance, SLOT(onDataChanged()));
          QTimer *timer = new QTimer(p_singletonInstance);
          connect(timer, SIGNAL(timeout()),p_singletonInstance,SLOT(oneSecTimerFired()));

          timer->start(1000); //1000ms fired

      }

      return p_singletonInstance;

  }

  void OvenStatistics::destroy(){
      if(!p_singletonInstance)
          delete p_singletonInstance;

  }

  OvenStatistics::OvenStatistics(QObject* parent) :QObject(parent)

  {

      int i = 0;

      curdoorstate = false;
      curSysErrorState = 0;

      curCommErrorState = 0;
      curSensorErrorState = 0;
      bDataRefreshed = false;

      realdata.d32 = 0;
  
      for(i=0;i<MAX_LOG_SENSOR;i++){
          curSensorValue[i].utemp = 0;
      }
  
      curSensorValue[12].itemp = 100;

      srvdata = new ServiceData();
      srvdata->loadServiceData();

  }

  OvenStatistics::~OvenStatistics(){

      delete srvdata;

  }

  void OvenStatistics::onDataChanged()

  {
      error_item *item;
      time_t ltime=0;

      uint16_t errstatetemp;

      qDebug() << "statics event fired";

      udp->fillControl(control);
      udp->fillData(state);

      bDataRefreshed = true;

      time(&ltime);

      if(oven->cooking() && control.system){
          if(state.door_state ==1 && curdoorstate==0){
              //door error

              item = &(srvdata->err_log.items.door);

              item->fired_cnt+=1;
              if(item->first_fired==0)item->first_fired = ltime;
              item->last_fried = ltime;
          }
          curdoorstate = state.door_state;

      }

      if(state.system_error!=0 &&  state.system_error != curSysErrorState){
          processSystemError( state.system_error,ltime);
      }
      curSysErrorState = state.system_error;

      errstatetemp = state.communication_error;

      if(errstatetemp!=0 && errstatetemp != curCommErrorState ){
          processCommError( errstatetemp,ltime );
      }
      curCommErrorState = errstatetemp;

      errstatetemp = state.sensor_error;

      if(errstatetemp!=0 && errstatetemp != curSensorErrorState ){

          processSensorError(errstatetemp,ltime );

      }
      curSensorErrorState = errstatetemp;
  
  
  }

  void OvenStatistics::processSensorError(uint16_t errflag, time_t ltime){

      error_item *item;

      QString strMsg = "",strTitle="";

      uint8_t state;
      if( control.system==0 && !oven->cooking()) state = SYS_OFF_COOK_OFF;
      else if(control.system != 0 && !oven->cooking()) state = SYS_ON_COOK_OFF;
      else if(control.system !=0 && oven->cooking()) state = SYS_ON_COOK_ON;
      else state = SYS_ON_COOK_OFF;
  
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_1)){

          item = &(srvdata->err_log.items.inner_temp_fail);

          strTitle = tr("내부 온도 이상 발생");
          strMsg  = tr("내부 온도 센서에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_1],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_2)){

          item = &(srvdata->err_log.items.qunching_temp_fail);

          strTitle  = tr("퀀칭 온도 이상 발생");
          strMsg  = tr("퀀칭 온도에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_2],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_3)){
          //Reserved allerrornoe 설정

          item = &(srvdata->err_log.items.qunching_temp_fail);

          strTitle  = tr("퀀칭 온도 이상 발생");
          strMsg  = tr("퀀칭 온도  센서에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_3],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_4)){

          item = &(srvdata->err_log.items.wall_temp1_fail);

          strTitle  = tr("벽면 온도 이상 발생");
          strMsg  = tr("벽면 온도 센서에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_4],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_5)){

          item = &(srvdata->err_log.items.steam_gen_temp_fail);

          strTitle  = tr("스팀제네레이터 온도 이상 발생");
          strMsg  = tr("스팀제네레이터 온도 센서에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_5],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_6)){

          item = &(srvdata->err_log.items.meatprove_temp1_fail);

          strTitle  = tr("미트프로브 온도 이상 발생");
          strMsg  = tr("미트프로브 온도 센서에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_6],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_7)){
         //Reseved

          item = &(srvdata->err_log.items.meatprove_temp2_fail);

          strTitle  = tr("미트프로브2 온도 이상 발생");
          strMsg  = tr("미트프로브2 온도 센서에 이상이 발생하였습니다.");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_7],strMsg , strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_8)){
          //Reserved

          item = &(srvdata->err_log.items.meatprove_temp3_fail);

          strMsg  = tr("미트프로브3 온도 센서에 이상이 발생하였습니다.");
          strTitle  = tr("미트프로브3 온도 이상 발생");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_8],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_9)){
          //Reserved

          item = &(srvdata->err_log.items.meatprove_temp4_fail);

          strMsg  = tr("미트프로브4 온도 센서에 이상이 발생하였습니다.");
          strTitle  = tr("미트프로브4 온도 이상 발생");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_9],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(SENSOR_ERR_SENSOR_10)){

          item = &(srvdata->err_log.items.pcb_temp_fail);

          strMsg  = tr("PCB 온도 센서에 이상이 발생하였습니다.");
          strTitle  = tr("PCB 온도 이상 발생");
          processErrorItems(item,sensor_err_type_def[state][SENSOR_ERR_SENSOR_10],strMsg,strTitle, ltime);

      }
  }

  void OvenStatistics::processCommError(uint16_t errflag, time_t ltime){

      error_item *item;

      QString strMsg = "",strTitle="";

      uint8_t state;
      if( control.system==0 && !oven->cooking()) state = SYS_OFF_COOK_OFF;
      else if(control.system != 0 && !oven->cooking()) state = SYS_ON_COOK_OFF;
      else if(control.system !=0 && oven->cooking()) state = SYS_ON_COOK_ON;
      else state = SYS_ON_COOK_OFF;
  
      if(errflag & MAKE_MASK(COMM_ERR_BUNNER1)){

          item = &(srvdata->err_log.items.upper_pan_fail);

          strMsg  = tr("상부 송풍기 이상 발생");

          strTitle  = tr("상부 송풍기 이상 발생");
          processErrorItems(item,comm_err_type_def[state][COMM_ERR_BUNNER1],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(COMM_ERR_BUNNER2)){

          item = &(srvdata->err_log.items.lower_pan_fail);

          strMsg  = tr("하부 송풍기 이상 발생");

          strTitle  = tr("하부 송풍기 이상 발생");
          processErrorItems(item,comm_err_type_def[state][COMM_ERR_BUNNER2],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(COMM_ERR_BUNNER3)){

          item = &(srvdata->err_log.items.steam_pan_fail);

          strMsg  = tr("스팀 송풍기 이상 발생");

          strTitle  = tr("스팀 송풍기 이상 발생");
          processErrorItems(item,comm_err_type_def[state][COMM_ERR_BUNNER3],strMsg,strTitle, ltime);

      }

      if(errflag & MAKE_MASK(COMM_ERR_LOWERFAN)){

          item = &(srvdata->err_log.items.lower_motor_fail);

          strMsg  = tr("하부 모터 컨트롤러 이상 발생");
          strTitle  = tr("하부 모터 컨트롤러 이상 발생");
          processErrorItems(item,comm_err_type_def[state][COMM_ERR_BUNNER2],strMsg,strTitle, ltime);

      }
      if(errflag & MAKE_MASK(COMM_ERR_UPPERFAN)){

          item = &(srvdata->err_log.items.upper_motor_fail);

          strMsg  = tr("상부 모터 컨트롤러 이상 발생");

          strTitle  = tr("상부 모터 컨트롤러 이상 발생");
          processErrorItems(item,comm_err_type_def[state][COMM_ERR_BUNNER2],strMsg,strTitle, ltime);

      }

  }

  void OvenStatistics::processSystemError(uint16_t errflag,time_t ltime){

     error_item *item;

     QString strMsg = "",strTitle = "";

     uint8_t state;
     if( control.system==0 && !oven->cooking()) state = SYS_OFF_COOK_OFF;
     else if(control.system != 0 && !oven->cooking()) state = SYS_ON_COOK_OFF;
     else if(control.system !=0 && oven->cooking()) state = SYS_ON_COOK_ON;
     else state = SYS_ON_COOK_OFF;
  
      if( errflag & MAKE_MASK(SYS_ERR_FIRE_TRIGGER1)){

          //버너 컨트롤러 1 착화 이상

          item = &(srvdata->err_log.items.upper_fire_fail);

          strMsg  = tr("상부 버너 착하가 되지 않습니다.");

          strTitle = tr("상부 버너 착하 이상 발생");
          processErrorItems(item, sys_err_type_def[state][SYS_ERR_FIRE_TRIGGER1],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_FIRE_TRIGGER2)){

          //버너 컨트롤러 2 착화 이상

          item = &(srvdata->err_log.items.lower_fire_fail);

          strMsg  = tr("하부 버너 착하가 되지 않습니다.");

          strTitle  = tr("하부 버너 착하 이상 발생");
          processErrorItems(item, sys_err_type_def[state][SYS_ERR_FIRE_TRIGGER2],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_FIRE_TRIGGER3)){

          item = &(srvdata->err_log.items.steam_fire_fail);

          strMsg  = tr("스팀 버너 착하가 되지 않습니다.");

          strMsg  = tr("스팀 버너 착하 이상 발생");
           processErrorItems(item, sys_err_type_def[state][SYS_ERR_FIRE_TRIGGER3],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_OVNE_TEMP_ALARM)){

          item = &(srvdata->err_log.items.inner_temp_high_alarm);

          strMsg  = tr("내부 온도가 과열되었습니다.");
          strTitle  = tr("내부 온도 과열 발생");
           processErrorItems(item, sys_err_type_def[state][SYS_ERR_OVNE_TEMP_ALARM],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_QUN_TEMP_ALARM)){
          //퀀칭 온도 센서 과열

          item = &(srvdata->err_log.items.qunching_temp_high_alarm);

          strTitle  = tr("퀀칭 온도 센서 이상 발생");
          strMsg  = tr("퀀칭 온도 센서가 과열되었습니다");
           processErrorItems(item, sys_err_type_def[state][SYS_ERR_QUN_TEMP_ALARM],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_CENTER_TEMP_ALARM)){
          //중심 온도 과열

          item = &(srvdata->err_log.items.meatprove_temp1_high_alarm);

          strTitle  = tr("미트프로브 온도 센서 이상 발생.");
          strMsg  = tr("미트프로브 온도 센서 과열되었습니다.");
           processErrorItems(item, sys_err_type_def[state][SYS_ERR_CENTER_TEMP_ALARM],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_WALL_TEMP_ALARM)){

          item = &(srvdata->err_log.items.wall_temp1_high_alarm);

          strTitle  = tr("벽면 온도 센서 이상 발생.");
          strMsg  = tr("벽면 온도 센서가 과열 되었습니다.");
           processErrorItems(item, sys_err_type_def[state][SYS_ERR_WALL_TEMP_ALARM],strMsg,strTitle,ltime);
      }
     if(errflag & MAKE_MASK(SYS_ERR_STAM_TEMP_ALARM)){

         item = &(srvdata->err_log.items.steam_gen_temp_high_alram);

         strTitle  = tr("스팀제네레이터 온도 과열 발생.");
         strMsg  = tr("스팀제네레이터 온도 센서 과열이 발생되었습니다.");
          processErrorItems(item, sys_err_type_def[state][SYS_ERR_STAM_TEMP_ALARM],strMsg,strTitle,ltime);
     }

      if(errflag & MAKE_MASK(SYS_ERR_WATER_SPLY_FAIL)){
          //급수 이상 -> 유량 센서 이상

          item = &(srvdata->err_log.items.water_level_sensor_fail);

          strTitle  = tr("급수 이상 발생");

          strMsg  = tr("급수가 되지 않습니다.");

           processErrorItems(item, sys_err_type_def[state][SYS_ERR_WATER_SPLY_FAIL],strMsg,strTitle,ltime);

      }

      if(errflag & MAKE_MASK(SYS_ERR_WATER_LEVEL_FAIL)){
          //급수 이상 -> 수위 센서 이상

          item = &(srvdata->err_log.items.water_level_sensor_fail);

          strTitle = tr("급수 이상 발생");

          strMsg  = tr("급수가 되지 않습니다.");

           processErrorItems(item, sys_err_type_def[state][SYS_ERR_WATER_LEVEL_FAIL],strMsg,strTitle,ltime);

      }
  }

  bool OvenStatistics::getNeedErrorClear(){

      return bNeedErrorClear;
  }

  void OvenStatistics::clearNeedErrorClear(){

      //에러클리어 송신 후 flag clear
      bNeedErrorClear = false;
  }

  void OvenStatistics::oneSecTimerFired(void){

      static int nOneSecCnt=1;
      time_t ltime;
  
      ltime = time(NULL);
  
      nOneSecCnt++;
      if( (nOneSecCnt % 10) ==0 ) {

          srvdata->saveServiceData();

          qDebug()<<"statics data saved";
      }

      if(bDataRefreshed) bDataRefreshed= false;
      else{
          udp->fillControl(control);
          udp->fillData(state);
      }
      //가열부 시간 측정
      if( (state.onoff_state1 & LOAD_STATE1_STEAM_BUNNER) !=0){

          srvdata->use_log.items.steam_heat +=1;

      }
      if( (state.onoff_state1 & (LOAD_STATE1_UPPER_BUNNER | LOAD_STATE1_LOWER_FAN))!=0){

          srvdata->use_log.items.dry_heat+=1;

          if(state.onoff_state1 & (LOAD_STATE1_UPPER_BUNNER)){

              srvdata->use_log.items.upper_heat +=1;

          }
          if((state.onoff_state2 & LOAD_STATE1_LOWER_BUNNER)!=0){

              srvdata->use_log.items.lower_heat +=1;

          }
      }
      //모드 시간 계산
      if(state.cooking_mode !=0){
          if(state.cooking_humidity==0){
              //건열 모드

              srvdata->use_log.items.cook_dry_mode+=1;

          }
          else if(state.cooking_humidity ==100){
              //스팀모드

              srvdata->use_log.items.cook_steam_mode+=1;

          }

          else srvdata->use_log.items.cook_combi_mode+=1;

      }

      if(state.cleaning_mode !=0 && state.cleaning_sate !=0){

          switch (state.cleaning_mode) {
          case (uint16_t)wash_mode_nocleanser:

              srvdata->use_log.items.wash_mode_nocleanser+=1;

              break;
          case (uint16_t)wash_mode_simple:

              srvdata->use_log.items.wash_mode_simple+=1;

              break;
          case (uint16_t)wash_mode_standard:

              srvdata->use_log.items.wash_mode_standard+=1;

              break;
          case (uint16_t)wash_mode_strong:

              srvdata->use_log.items.wash_mode_strong+=1;

              break;
          case (uint16_t)wash_mode_highspeed:

              srvdata->use_log.items.wash_mode_speed+=1;

              break;
          default:
              break;
          }
      }
      if(control.cooldown ==1){

          srvdata->use_log.items.cooldown_mode+=1;

      }
      //부품

      if(state.door_state !=0){

          srvdata->use_log.items.door_open+=1;

          realdata.b.door_open = 1;

      }
      if(state.onoff_state2 !=0){
             if( (state.onoff_state2 & LOAD_STATE2_DV)!=0){

                 srvdata->use_log.items.dv_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_SSV)!=0){

                 srvdata->use_log.items.ssv_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_QNV)!=0){

                 srvdata->use_log.items.qnv_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_SNV)!=0){

                 srvdata->use_log.items.snv_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_SSP)!=0){

                 srvdata->use_log.items.ssp_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_HDM)!=0){

                 srvdata->use_log.items.hdm_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_DP)!=0){

                 srvdata->use_log.items.dp_open+=1;

             }
             if((state.onoff_state2 & LOAD_STATE2_UNP) !=0){

                 srvdata->use_log.items.unp_open+=1;

             }
      }

  
      //Real time Data Refresh
  
      realdata.b.door_open = state.door_state==0?0:1;
      realdata.b.dv_open = (state.onoff_state2&LOAD_STATE2_DV)==0?0:1;
      realdata.b.qnv_open = (state.onoff_state2&LOAD_STATE2_QNV)==0?0:1;
      realdata.b.sgnv_open = (state.onoff_state2&LOAD_STATE2_SGNV)==0?0:1;
      realdata.b.snv_open = (state.onoff_state2&LOAD_STATE2_SNV)==0?0:1;

      realdata.b.wsv_open = (state.onoff_state2&LOAD_STATE2_WSV)==0?0:1;

      realdata.b.ssv_open = (state.onoff_state2&LOAD_STATE2_SSV)==0?0:1;
      realdata.b.water_level = 0;

      if(srvdata->sensor_log.items.B1.high_temp.itemp < state.sensor1 ){
          srvdata->sensor_log.items.B1.high_temp.itemp = state.sensor1;
          srvdata->sensor_log.items.B1.last_high_time = ltime;

      }
      curSensorValue[0].itemp = state.sensor1;

      if(srvdata->sensor_log.items.B2.high_temp.itemp < state.sensor2 ){
          srvdata->sensor_log.items.B2.high_temp.itemp = state.sensor2;
          srvdata->sensor_log.items.B2.last_high_time = ltime;

      }
      curSensorValue[1].itemp = state.sensor2;

      if(srvdata->sensor_log.items.B3_1.high_temp.itemp < state.sensor6 ){
          srvdata->sensor_log.items.B3_1.high_temp.itemp = state.sensor6;
          srvdata->sensor_log.items.B3_1.last_high_time = ltime;

      }
      curSensorValue[5].itemp = state.sensor6;

      if(srvdata->sensor_log.items.B4.high_temp.itemp < state.sensor4 ){
          srvdata->sensor_log.items.B4.high_temp.itemp = state.sensor4;
          srvdata->sensor_log.items.B4.last_high_time = ltime;

      }
       curSensorValue[3].itemp = state.sensor4;

      if(srvdata->sensor_log.items.B5.high_temp.itemp < state.sensor5 ){
          srvdata->sensor_log.items.B5.high_temp.itemp = state.sensor5;
          srvdata->sensor_log.items.B5.last_high_time = ltime;

      }
      curSensorValue[4].itemp = state.sensor5;

      if(srvdata->sensor_log.items.B3_2.high_temp.itemp < state.sensor7 ){
          srvdata->sensor_log.items.B3_2.high_temp.itemp = state.sensor7;
          srvdata->sensor_log.items.B3_2.last_high_time = ltime;

      }
      curSensorValue[6].itemp = state.sensor7;

      if(srvdata->sensor_log.items.B3_3.high_temp.itemp < state.sensor8 ){
          srvdata->sensor_log.items.B3_3.high_temp.itemp = state.sensor8;
          srvdata->sensor_log.items.B3_3.last_high_time = ltime;

      }
      curSensorValue[7].itemp = state.sensor8;

      if(srvdata->sensor_log.items.B3_4.high_temp.itemp < state.sensor9 ){
          srvdata->sensor_log.items.B3_4.high_temp.itemp = state.sensor9;
          srvdata->sensor_log.items.B3_4.last_high_time = ltime;

      }
      curSensorValue[8].itemp = state.sensor9;

      if(srvdata->sensor_log.items.mbar1.high_temp.utemp < state.sensor11 ){
          srvdata->sensor_log.items.mbar1.high_temp.utemp = state.sensor11;
          srvdata->sensor_log.items.mbar1.last_high_time = ltime;

      }
      curSensorValue[10].utemp = state.sensor11;

      if(srvdata->sensor_log.items.mbar2.high_temp.utemp < state.sensor12 ){
          srvdata->sensor_log.items.mbar2.high_temp.utemp = state.sensor12;
          srvdata->sensor_log.items.mbar2.last_high_time = ltime;

      }
      curSensorValue[11].utemp = state.sensor12;

      if(srvdata->sensor_log.items.pcb.high_temp.itemp < state.sensor13 ){
          srvdata->sensor_log.items.pcb.high_temp.itemp = state.sensor13;
          srvdata->sensor_log.items.pcb.last_high_time = ltime;

      }
      curSensorValue[12].itemp = state.sensor13;

      if(srvdata->sensor_log.items.adc.high_temp.itemp < state.sensor14 ){
          srvdata->sensor_log.items.adc.high_temp.itemp = state.sensor14;
          srvdata->sensor_log.items.adc.last_high_time = ltime;

      }
      curSensorValue[13].itemp = state.sensor14;

  }

  void OvenStatistics::processErrorItems(error_item *item, error_exe_type errtype, const QString &MsgDesc, const QString &MsgTitle, time_t ltime){

      qDebug() << (int) (item - &(srvdata->err_log.values[0]))  <<   "ERROR Fired!";

     if(m_pLastErrItem == item ){

          srvdata->err_log.items.repeat_error.fired_cnt =item->fired_cnt;
          srvdata->err_log.items.repeat_error.first_fired = item->first_fired;
          srvdata->err_log.items.repeat_error.last_fried = item->last_fried;

     }
     m_pLastErrItem = item;

      if(errtype >= error_type_onlychk){

          item->fired_cnt+=1;
          if(item->first_fired == 0) item->first_fired = ltime;
          item->last_fried = ltime;
      }

      switch(errtype){
          case error_type_onlypop:
          case error_type_popclr:
          case error_type_popnonclr:
              {

                  ErrorPopupDlg *dlg = new ErrorPopupDlg(QApplication::activeWindow(),MsgDesc,MsgTitle);

                  dlg->exec();
                  break;
              }

      case error_type_engclr:

          case error_type_engnonclr:
          case error_type_onlyeng:
              {

                  EngineerMenuWindow *w = new EngineerMenuWindow(QApplication::activeWindow());

                  w->showFullScreen();
                  break;
              }
          default:
              break;
      }
      if(errtype > error_type_clrsplit){
          //에러 클리어 명령 송신
          qDebug() << "send error clear command";
          if(errtype == error_type_engclr){
              //확인 후 송신
              bNeedErrorClear = true;
          }
          else{
              //에러클리어 메시지 즉시 송신

              udp->set(TG_ERROR_CLEAR,0xCECE);

          }
      }

  }

  realtime_data OvenStatistics::getPartsRealtimeData(void){

      return realdata;
  }

  uint8_t OvenStatistics::getSensorTypeByIdx(uint16_t idx){

      if(idx > MAX_LOG_SENSOR)  return 0;
      return sensorTypeInfo[idx];
  }

  type_temp OvenStatistics::getCurSensorValueByIdx(uint16_t idx){

      return curSensorValue[idx];
  }