/*
   * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc.
   *
   * SPDX-License-Identifier:	GPL-2.0+
   */
  
  /*
   * mpc8572ds board configuration file
   *
   */
  #ifndef __CONFIG_H
  #define __CONFIG_H
  
  #define CONFIG_SYS_GENERIC_BOARD
  #define CONFIG_DISPLAY_BOARDINFO
  
  #include "../board/freescale/common/ics307_clk.h"
  
  #ifdef CONFIG_36BIT
  #define CONFIG_PHYS_64BIT
  #endif
  
  #ifndef CONFIG_SYS_TEXT_BASE
  #define CONFIG_SYS_TEXT_BASE	0xeff40000
  #endif
  
  #ifndef CONFIG_RESET_VECTOR_ADDRESS
  #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
  #endif
  
  #ifndef CONFIG_SYS_MONITOR_BASE
  #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
  #endif
  
  /* High Level Configuration Options */
  #define CONFIG_BOOKE		1	/* BOOKE */
  #define CONFIG_E500		1	/* BOOKE e500 family */
  #define CONFIG_MPC8572		1
  #define CONFIG_MPC8572DS	1
  #define CONFIG_MP		1	/* support multiple processors */
  
  #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
  #define CONFIG_PCI		1	/* Enable PCI/PCIE */
  #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
  #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
  #define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
  #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
  #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
  #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
  #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
  
  #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
  
  #define CONFIG_TSEC_ENET		/* tsec ethernet support */
  #define CONFIG_ENV_OVERWRITE
  
  #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
  #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk() /* ddrclk for MPC85xx */
  #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
  
  /*
   * These can be toggled for performance analysis, otherwise use default.
   */
  #define CONFIG_L2_CACHE			/* toggle L2 cache */
  #define CONFIG_BTB			/* toggle branch predition */
  
  #define CONFIG_ENABLE_36BIT_PHYS	1
  
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_ADDR_MAP			1
  #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
  #endif
  
  #define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
  #define CONFIG_SYS_MEMTEST_END		0x7fffffff
  #define CONFIG_PANIC_HANG	/* do not reset board on panic */
  
  /*
   * Config the L2 Cache as L2 SRAM
   */
  #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_INIT_L2_ADDR_PHYS		0xff8f80000ull
  #else
  #define CONFIG_SYS_INIT_L2_ADDR_PHYS		CONFIG_SYS_INIT_L2_ADDR
  #endif
  #define CONFIG_SYS_L2_SIZE		(512 << 10)
  #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  
  #define CONFIG_SYS_CCSRBAR		0xffe00000
  #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
  
  #if defined(CONFIG_NAND_SPL)
  #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  #endif
  
  /* DDR Setup */
  #define CONFIG_VERY_BIG_RAM
  #define CONFIG_SYS_FSL_DDR2
  #undef CONFIG_FSL_DDR_INTERACTIVE
  #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
  #define CONFIG_DDR_SPD
  
  #define CONFIG_DDR_ECC
  #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
  
  #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
  #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
  
  #define CONFIG_NUM_DDR_CONTROLLERS	2
  #define CONFIG_DIMM_SLOTS_PER_CTLR	1
  #define CONFIG_CHIP_SELECTS_PER_CTRL	2
  
  /* I2C addresses of SPD EEPROMs */
  #define CONFIG_SYS_SPD_BUS_NUM		1	/* SPD EEPROMS locate on I2C bus 1 */
  #define SPD_EEPROM_ADDRESS1	0x51	/* CTLR 0 DIMM 0 */
  #define SPD_EEPROM_ADDRESS2	0x52	/* CTLR 1 DIMM 0 */
  
  /* These are used when DDR doesn't use SPD.  */
  #define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
  #define CONFIG_SYS_DDR_CS0_BNDS		0x0000001F
  #define CONFIG_SYS_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
  #define CONFIG_SYS_DDR_TIMING_3		0x00020000
  #define CONFIG_SYS_DDR_TIMING_0		0x00260802
  #define CONFIG_SYS_DDR_TIMING_1		0x626b2634
  #define CONFIG_SYS_DDR_TIMING_2		0x062874cf
  #define CONFIG_SYS_DDR_MODE_1		0x00440462
  #define CONFIG_SYS_DDR_MODE_2		0x00000000
  #define CONFIG_SYS_DDR_INTERVAL		0x0c300100
  #define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
  #define CONFIG_SYS_DDR_CLK_CTRL		0x00800000
  #define CONFIG_SYS_DDR_OCD_CTRL		0x00000000
  #define CONFIG_SYS_DDR_OCD_STATUS	0x00000000
  #define CONFIG_SYS_DDR_CONTROL		0xc3000008	/* Type = DDR2 */
  #define CONFIG_SYS_DDR_CONTROL2		0x24400000
  
  #define CONFIG_SYS_DDR_ERR_INT_EN	0x0000000d
  #define CONFIG_SYS_DDR_ERR_DIS		0x00000000
  #define CONFIG_SYS_DDR_SBE		0x00010000
  
  /*
   * Make sure required options are set
   */
  #ifndef CONFIG_SPD_EEPROM
  #error ("CONFIG_SPD_EEPROM is required")
  #endif
  
  #undef CONFIG_CLOCKS_IN_MHZ
  
  /*
   * Memory map
   *
   * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
   * 0x8000_0000	0xbfff_ffff	PCI Express Mem		1G non-cacheable
   * 0xc000_0000	0xdfff_ffff	PCI			512M non-cacheable
   * 0xe100_0000	0xe3ff_ffff	PCI IO range		4M non-cacheable
   *
   * Localbus cacheable (TBD)
   * 0xXXXX_XXXX	0xXXXX_XXXX	SRAM			YZ M Cacheable
   *
   * Localbus non-cacheable
   * 0xe000_0000	0xe80f_ffff	Promjet/free		128M non-cacheable
   * 0xe800_0000	0xefff_ffff	FLASH			128M non-cacheable
   * 0xffa0_0000	0xffaf_ffff	NAND			1M non-cacheable
   * 0xffdf_0000	0xffdf_7fff	PIXIS			32K non-cacheable TLB0
   * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
   * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
   */
  
  /*
   * Local Bus Definitions
   */
  #define CONFIG_SYS_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
  #else
  #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
  #endif
  
  
  #define CONFIG_FLASH_BR_PRELIM \
  	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
  #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
  
  #define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
  #define CONFIG_SYS_OR1_PRELIM	0xf8000ff7
  
  #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
  #define CONFIG_SYS_FLASH_QUIET_TEST
  #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
  
  #define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
  #define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
  #undef	CONFIG_SYS_FLASH_CHECKSUM
  #define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
  #define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
  
  #undef CONFIG_SYS_RAMBOOT
  
  #define CONFIG_FLASH_CFI_DRIVER
  #define CONFIG_SYS_FLASH_CFI
  #define CONFIG_SYS_FLASH_EMPTY_INFO
  #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
  
  #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
  
  #define CONFIG_HWCONFIG			/* enable hwconfig */
  #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
  #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
  #ifdef CONFIG_PHYS_64BIT
  #define PIXIS_BASE_PHYS	0xfffdf0000ull
  #else
  #define PIXIS_BASE_PHYS	PIXIS_BASE
  #endif
  
  #define CONFIG_SYS_BR3_PRELIM	(BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
  #define CONFIG_SYS_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
  
  #define PIXIS_ID		0x0	/* Board ID at offset 0 */
  #define PIXIS_VER		0x1	/* Board version at offset 1 */
  #define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
  #define PIXIS_CSR   		0x3	/* PIXIS General control/status register */
  #define PIXIS_RST		0x4	/* PIXIS Reset Control register */
  #define PIXIS_PWR		0x5	/* PIXIS Power status register */
  #define PIXIS_AUX		0x6	/* Auxiliary 1 register */
  #define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
  #define PIXIS_AUX2		0x8	/* Auxiliary 2 register */
  #define PIXIS_VCTL		0x10	/* VELA Control Register */
  #define PIXIS_VSTAT		0x11	/* VELA Status Register */
  #define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
  #define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
  #define PIXIS_VCORE0	 	0x14	/* VELA VCORE0 Register */
  #define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
  #define PIXIS_VBOOT_LBMAP	0xc0	/* VBOOT - CFG_LBMAP */
  #define PIXIS_VBOOT_LBMAP_NOR0	0x00	/* cfg_lbmap - boot from NOR 0 */
  #define PIXIS_VBOOT_LBMAP_PJET	0x01	/* cfg_lbmap - boot from projet */
  #define PIXIS_VBOOT_LBMAP_NAND	0x02	/* cfg_lbmap - boot from NAND */
  #define PIXIS_VBOOT_LBMAP_NOR1	0x03	/* cfg_lbmap - boot from NOR 1 */
  #define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
  #define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
  #define PIXIS_VSPEED2		0x19	/* VELA VSpeed 2 */
  #define PIXIS_VSYSCLK0		0x1C	/* VELA SYSCLK0 Register */
  #define PIXIS_VSYSCLK1		0x1D	/* VELA SYSCLK1 Register */
  #define PIXIS_VSYSCLK2		0x1E	/* VELA SYSCLK2 Register */
  #define PIXIS_VDDRCLK0		0x1F	/* VELA DDRCLK0 Register */
  #define PIXIS_VDDRCLK1		0x20	/* VELA DDRCLK1 Register */
  #define PIXIS_VDDRCLK2		0x21	/* VELA DDRCLK2 Register */
  #define PIXIS_VWATCH		0x24    /* Watchdog Register */
  #define PIXIS_LED		0x25    /* LED Register */
  
  #define PIXIS_SPD_SYSCLK_MASK		0x7		/* SYSCLK option */
  
  /* old pixis referenced names */
  #define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
  #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
  #define CONFIG_SYS_PIXIS_VBOOT_MASK	0xc0
  #define PIXIS_VSPEED2_TSEC1SER	0x8
  #define PIXIS_VSPEED2_TSEC2SER	0x4
  #define PIXIS_VSPEED2_TSEC3SER	0x2
  #define PIXIS_VSPEED2_TSEC4SER	0x1
  #define PIXIS_VCFGEN1_TSEC1SER	0x20
  #define PIXIS_VCFGEN1_TSEC2SER	0x20
  #define PIXIS_VCFGEN1_TSEC3SER	0x20
  #define PIXIS_VCFGEN1_TSEC4SER	0x20
  #define PIXIS_VSPEED2_MASK	(PIXIS_VSPEED2_TSEC1SER \
  					| PIXIS_VSPEED2_TSEC2SER \
  					| PIXIS_VSPEED2_TSEC3SER \
  					| PIXIS_VSPEED2_TSEC4SER)
  #define PIXIS_VCFGEN1_MASK	(PIXIS_VCFGEN1_TSEC1SER \
  					| PIXIS_VCFGEN1_TSEC2SER \
  					| PIXIS_VCFGEN1_TSEC3SER \
  					| PIXIS_VCFGEN1_TSEC4SER)
  
  #define CONFIG_SYS_INIT_RAM_LOCK	1
  #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
  #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000	/* Size of used area in RAM */
  
  #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
  
  #define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
  #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
  
  #ifndef CONFIG_NAND_SPL
  #define CONFIG_SYS_NAND_BASE		0xffa00000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_NAND_BASE_PHYS	0xfffa00000ull
  #else
  #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
  #endif
  #else
  #define CONFIG_SYS_NAND_BASE		0xfff00000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_NAND_BASE_PHYS	0xffff00000ull
  #else
  #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
  #endif
  #endif
  
  #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
  				CONFIG_SYS_NAND_BASE + 0x40000, \
  				CONFIG_SYS_NAND_BASE + 0x80000,\
  				CONFIG_SYS_NAND_BASE + 0xC0000}
  #define CONFIG_SYS_MAX_NAND_DEVICE    4
  #define CONFIG_CMD_NAND		1
  #define CONFIG_NAND_FSL_ELBC	1
  #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
  #define CONFIG_SYS_NAND_MAX_OOBFREE	5
  #define CONFIG_SYS_NAND_MAX_ECCPOS	56
  
  /* NAND boot: 4K NAND loader config */
  #define CONFIG_SYS_NAND_SPL_SIZE	0x1000
  #define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
  #define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
  #define CONFIG_SYS_NAND_U_BOOT_START \
  		(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
  #define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
  #define CONFIG_SYS_NAND_U_BOOT_RELOC	(CONFIG_SYS_INIT_L2_END - 0x2000)
  #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
  
  
  /* NAND flash config */
  #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
  			       | BR_PS_8	       /* Port Size = 8 bit */ \
  			       | BR_MS_FCM	       /* MSEL = FCM */ \
  			       | BR_V)		       /* valid */
  #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
  			       | OR_FCM_PGS	       /* Large Page*/ \
  			       | OR_FCM_CSCT \
  			       | OR_FCM_CST \
  			       | OR_FCM_CHT \
  			       | OR_FCM_SCY_1 \
  			       | OR_FCM_TRLX \
  			       | OR_FCM_EHTR)
  
  #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
  #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM	/* NOR Options */
  #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
  #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
  #define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
  			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
  			       | BR_PS_8	       /* Port Size = 8 bit */ \
  			       | BR_MS_FCM	       /* MSEL = FCM */ \
  			       | BR_V)		       /* valid */
  #define CONFIG_SYS_OR4_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
  #define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
  			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
  			       | BR_PS_8	       /* Port Size = 8 bit */ \
  			       | BR_MS_FCM	       /* MSEL = FCM */ \
  			       | BR_V)		       /* valid */
  #define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
  
  #define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\
  			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
  			       | BR_PS_8	       /* Port Size = 8 bit */ \
  			       | BR_MS_FCM	       /* MSEL = FCM */ \
  			       | BR_V)		       /* valid */
  #define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
  
  
  /* Serial Port - controlled on board with jumper J8
   * open - index 2
   * shorted - index 1
   */
  #define CONFIG_CONS_INDEX	1
  #define CONFIG_SYS_NS16550
  #define CONFIG_SYS_NS16550_SERIAL
  #define CONFIG_SYS_NS16550_REG_SIZE	1
  #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
  #ifdef CONFIG_NAND_SPL
  #define CONFIG_NS16550_MIN_FUNCTIONS
  #endif
  
  #define CONFIG_SYS_BAUDRATE_TABLE	\
  	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
  
  #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
  #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
  
  /* Use the HUSH parser */
  #define CONFIG_SYS_HUSH_PARSER
  
  /*
   * Pass open firmware flat tree
   */
  #define CONFIG_OF_LIBFDT		1
  #define CONFIG_OF_BOARD_SETUP		1
  #define CONFIG_OF_STDOUT_VIA_ALIAS	1
  
  /* new uImage format support */
  #define CONFIG_FIT		1
  #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
  
  /* I2C */
  #define CONFIG_SYS_I2C
  #define CONFIG_SYS_I2C_FSL
  #define CONFIG_SYS_FSL_I2C_SPEED	400000
  #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
  #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
  #define CONFIG_SYS_FSL_I2C2_SPEED	400000
  #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
  #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
  #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x29} }
  #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
  
  /*
   * I2C2 EEPROM
   */
  #define CONFIG_ID_EEPROM
  #ifdef CONFIG_ID_EEPROM
  #define CONFIG_SYS_I2C_EEPROM_NXID
  #endif
  #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
  #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
  #define CONFIG_SYS_EEPROM_BUS_NUM	1
  
  /*
   * General PCI
   * Memory space is mapped 1-1, but I/O space must start from 0.
   */
  
  /* controller 3, direct to uli, tgtid 3, Base address 8000 */
  #define CONFIG_SYS_PCIE3_NAME		"ULI"
  #define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
  #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc00000000ull
  #else
  #define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
  #define CONFIG_SYS_PCIE3_MEM_PHYS	0x80000000
  #endif
  #define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
  #define CONFIG_SYS_PCIE3_IO_VIRT	0xffc00000
  #define CONFIG_SYS_PCIE3_IO_BUS	0x00000000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_PCIE3_IO_PHYS	0xfffc00000ull
  #else
  #define CONFIG_SYS_PCIE3_IO_PHYS	0xffc00000
  #endif
  #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
  
  /* controller 2, Slot 2, tgtid 2, Base address 9000 */
  #define CONFIG_SYS_PCIE2_NAME		"Slot 1"
  #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
  #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
  #else
  #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
  #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
  #endif
  #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
  #define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
  #define CONFIG_SYS_PCIE2_IO_BUS	0x00000000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
  #else
  #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
  #endif
  #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
  
  /* controller 1, Slot 1, tgtid 1, Base address a000 */
  #define CONFIG_SYS_PCIE1_NAME		"Slot 2"
  #define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
  #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
  #else
  #define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
  #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
  #endif
  #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
  #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
  #define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
  #ifdef CONFIG_PHYS_64BIT
  #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc20000ull
  #else
  #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
  #endif
  #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
  
  #if defined(CONFIG_PCI)
  
  /*PCIE video card used*/
  #define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE1_IO_VIRT
  
  /* video */
  #define CONFIG_VIDEO
  
  #if defined(CONFIG_VIDEO)
  #define CONFIG_BIOSEMU
  #define CONFIG_CFB_CONSOLE
  #define CONFIG_VIDEO_SW_CURSOR
  #define CONFIG_VGA_AS_SINGLE_DEVICE
  #define CONFIG_ATI_RADEON_FB
  #define CONFIG_VIDEO_LOGO
  /*#define CONFIG_CONSOLE_CURSOR*/
  #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
  #endif
  
  #define CONFIG_PCI_PNP			/* do pci plug-and-play */
  
  #undef CONFIG_EEPRO100
  #undef CONFIG_TULIP
  #undef CONFIG_RTL8139
  #define CONFIG_E1000			/* Define e1000 pci Ethernet card */
  
  #ifndef CONFIG_PCI_PNP
  	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
  	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BUS
  	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
  #endif
  
  #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
  #define CONFIG_DOS_PARTITION
  #define CONFIG_SCSI_AHCI
  
  #ifdef CONFIG_SCSI_AHCI
  #define CONFIG_LIBATA
  #define CONFIG_SATA_ULI5288
  #define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
  #define CONFIG_SYS_SCSI_MAX_LUN	1
  #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
  #define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
  #endif /* SCSI */
  
  #endif	/* CONFIG_PCI */
  
  
  #if defined(CONFIG_TSEC_ENET)
  
  #define CONFIG_MII		1	/* MII PHY management */
  #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
  #define CONFIG_TSEC1	1
  #define CONFIG_TSEC1_NAME	"eTSEC1"
  #define CONFIG_TSEC2	1
  #define CONFIG_TSEC2_NAME	"eTSEC2"
  #define CONFIG_TSEC3	1
  #define CONFIG_TSEC3_NAME	"eTSEC3"
  #define CONFIG_TSEC4	1
  #define CONFIG_TSEC4_NAME	"eTSEC4"
  
  #define CONFIG_PIXIS_SGMII_CMD
  #define CONFIG_FSL_SGMII_RISER	1
  #define SGMII_RISER_PHY_OFFSET	0x1c
  
  #ifdef CONFIG_FSL_SGMII_RISER
  #define CONFIG_SYS_TBIPA_VALUE		0x10 /* avoid conflict with eTSEC4 paddr */
  #endif
  
  #define TSEC1_PHY_ADDR		0
  #define TSEC2_PHY_ADDR		1
  #define TSEC3_PHY_ADDR		2
  #define TSEC4_PHY_ADDR		3
  
  #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
  #define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
  #define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
  #define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
  
  #define TSEC1_PHYIDX		0
  #define TSEC2_PHYIDX		0
  #define TSEC3_PHYIDX		0
  #define TSEC4_PHYIDX		0
  
  #define CONFIG_ETHPRIME		"eTSEC1"
  
  #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
  #endif	/* CONFIG_TSEC_ENET */
  
  /*
   * Environment
   */
  
  #if defined(CONFIG_SYS_RAMBOOT)
  
  #else
  	#define CONFIG_ENV_IS_IN_FLASH	1
  	#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
  	#define CONFIG_ENV_ADDR	0xfff80000
  	#else
  	#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  	#endif
  	#define CONFIG_ENV_SIZE	0x2000
  	#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
  #endif
  
  #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
  #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
  
  /*
   * Command line configuration.
   */
  #include <config_cmd_default.h>
  
  #define CONFIG_CMD_ERRATA
  #define CONFIG_CMD_IRQ
  #define CONFIG_CMD_PING
  #define CONFIG_CMD_I2C
  #define CONFIG_CMD_MII
  #define CONFIG_CMD_ELF
  #define CONFIG_CMD_SETEXPR
  #define CONFIG_CMD_REGINFO
  
  #if defined(CONFIG_PCI)
  #define CONFIG_CMD_PCI
  #define CONFIG_CMD_NET
  #define CONFIG_CMD_SCSI
  #define CONFIG_CMD_EXT2
  #endif
  
  /*
   * USB
   */
  #define CONFIG_USB_EHCI
  
  #ifdef CONFIG_USB_EHCI
  #define CONFIG_CMD_USB
  #define CONFIG_USB_EHCI_PCI
  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  #define CONFIG_USB_STORAGE
  #define CONFIG_PCI_EHCI_DEVICE			0
  #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
  #endif
  
  #undef CONFIG_WATCHDOG			/* watchdog disabled */
  
  /*
   * Miscellaneous configurable options
   */
  #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
  #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
  #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
  #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
  #if defined(CONFIG_CMD_KGDB)
  #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
  #else
  #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
  #endif
  #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
  #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
  #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
  
  /*
   * For booting Linux, the board info and command line data
   * have to be in the first 64 MB of memory, since this is
   * the maximum mapped by the Linux kernel during initialization.
   */
  #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
  #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
  
  #if defined(CONFIG_CMD_KGDB)
  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
  #endif
  
  /*
   * Environment Configuration
   */
  
  /* The mac addresses for all ethernet interface */
  #if defined(CONFIG_TSEC_ENET)
  #define CONFIG_HAS_ETH0
  #define CONFIG_ETHADDR	00:E0:0C:02:00:FD
  #define CONFIG_HAS_ETH1
  #define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
  #define CONFIG_HAS_ETH2
  #define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
  #define CONFIG_HAS_ETH3
  #define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
  #endif
  
  #define CONFIG_IPADDR		192.168.1.254
  
  #define CONFIG_HOSTNAME		unknown
  #define CONFIG_ROOTPATH		"/opt/nfsroot"
  #define CONFIG_BOOTFILE		"uImage"
  #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
  
  #define CONFIG_SERVERIP		192.168.1.1
  #define CONFIG_GATEWAYIP	192.168.1.1
  #define CONFIG_NETMASK		255.255.255.0
  
  /* default location for tftp and bootm */
  #define CONFIG_LOADADDR		1000000
  
  #define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
  #undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
  
  #define CONFIG_BAUDRATE	115200
  
  #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"		\
  "netdev=eth0\0"						\
  "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"				\
  "tftpflash=tftpboot $loadaddr $uboot; "			\
  	"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
  		" +$filesize; "	\
  	"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
  		" +$filesize; "	\
  	"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
  		" $filesize; "	\
  	"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
  		" +$filesize; "	\
  	"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
  		" $filesize\0"	\
  "consoledev=ttyS0\0"				\
  "ramdiskaddr=2000000\0"			\
  "ramdiskfile=8572ds/ramdisk.uboot\0"		\
  "fdtaddr=c00000\0"				\
  "fdtfile=8572ds/mpc8572ds.dtb\0"		\
  "bdev=sda3\0"
  
  #define CONFIG_HDBOOT				\
   "setenv bootargs root=/dev/$bdev rw "		\
   "console=$consoledev,$baudrate $othbootargs;"	\
   "tftp $loadaddr $bootfile;"			\
   "tftp $fdtaddr $fdtfile;"			\
   "bootm $loadaddr - $fdtaddr"
  
  #define CONFIG_NFSBOOTCOMMAND		\
   "setenv bootargs root=/dev/nfs rw "	\
   "nfsroot=$serverip:$rootpath "		\
   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
   "console=$consoledev,$baudrate $othbootargs;"	\
   "tftp $loadaddr $bootfile;"		\
   "tftp $fdtaddr $fdtfile;"		\
   "bootm $loadaddr - $fdtaddr"
  
  #define CONFIG_RAMBOOTCOMMAND		\
   "setenv bootargs root=/dev/ram rw "	\
   "console=$consoledev,$baudrate $othbootargs;"	\
   "tftp $ramdiskaddr $ramdiskfile;"	\
   "tftp $loadaddr $bootfile;"		\
   "tftp $fdtaddr $fdtfile;"		\
   "bootm $loadaddr $ramdiskaddr $fdtaddr"
  
  #define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT
  
  #endif	/* __CONFIG_H */