menuconfig POWER_SUPPLY
  	bool "Power supply class support"
  	help
  	  Say Y here to enable power supply class support. This allows
  	  power supply (batteries, AC, USB) monitoring by userspace
  	  via sysfs and uevent (if available) and/or APM kernel interface
  	  (if selected below).
  
  if POWER_SUPPLY
  
  config POWER_SUPPLY_DEBUG
  	bool "Power supply debug"
  	help
  	  Say Y here to enable debugging messages for power supply class
  	  and drivers.
  
  config PDA_POWER
  	tristate "Generic PDA/phone power driver"
  	depends on !S390
  	help
  	  Say Y here to enable generic power driver for PDAs and phones with
  	  one or two external power supplies (AC/USB) connected to main and
  	  backup batteries, and optional builtin charger.
  
  config APM_POWER
  	tristate "APM emulation for class batteries"
  	depends on APM_EMULATION
  	help
  	  Say Y here to enable support APM status emulation using
  	  battery class devices.
  
  config GENERIC_ADC_BATTERY
  	tristate "Generic battery support using IIO"
  	depends on IIO
  	help
  	  Say Y here to enable support for the generic battery driver
  	  which uses IIO framework to read adc.
  
  config MAX8925_POWER
  	tristate "MAX8925 battery charger support"
  	depends on MFD_MAX8925
  	help
  	  Say Y here to enable support for the battery charger in the Maxim
  	  MAX8925 PMIC.
  
  config WM831X_BACKUP
  	tristate "WM831X backup battery charger support"
  	depends on MFD_WM831X
  	help
  	  Say Y here to enable support for the backup battery charger
  	  in the Wolfson Microelectronics WM831x PMICs.
  
  config WM831X_POWER
  	tristate "WM831X PMU support"
  	depends on MFD_WM831X
  	help
  	  Say Y here to enable support for the power management unit
  	  provided by Wolfson Microelectronics WM831x PMICs.
  
  config WM8350_POWER
          tristate "WM8350 PMU support"
          depends on MFD_WM8350
          help
            Say Y here to enable support for the power management unit
  	  provided by the Wolfson Microelectronics WM8350 PMIC.
  
  config TEST_POWER
  	tristate "Test power driver"
  	help
  	  This driver is used for testing. It's safe to say M here.
  
  config BATTERY_88PM860X
  	tristate "Marvell 88PM860x battery driver"
  	depends on MFD_88PM860X
  	help
  	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
  
  config BATTERY_DS2760
  	tristate "DS2760 battery driver (HP iPAQ & others)"
  	depends on W1 && W1_SLAVE_DS2760
  	help
  	  Say Y here to enable support for batteries with ds2760 chip.
  
  config BATTERY_DS2780
  	tristate "DS2780 battery driver"
  	depends on HAS_IOMEM
  	select W1
  	select W1_SLAVE_DS2780
  	help
  	  Say Y here to enable support for batteries with ds2780 chip.
  
  config BATTERY_DS2781
  	tristate "DS2781 battery driver"
  	depends on HAS_IOMEM
  	select W1
  	select W1_SLAVE_DS2781
  	help
  	  If you enable this you will have the DS2781 battery driver support.
  
  	  The battery monitor chip is used in many batteries/devices
  	  as the one who is responsible for charging/discharging/monitoring
  	  Li+ batteries.
  
  	  If you are unsure, say N.
  
  config BATTERY_DS2782
  	tristate "DS2782/DS2786 standalone gas-gauge"
  	depends on I2C
  	help
  	  Say Y here to enable support for the DS2782/DS2786 standalone battery
  	  gas-gauge.
  
  config BATTERY_PMU
  	tristate "Apple PMU battery"
  	depends on PPC32 && ADB_PMU
  	help
  	  Say Y here to expose battery information on Apple machines
  	  through the generic battery class.
  
  config BATTERY_OLPC
  	tristate "One Laptop Per Child battery"
  	depends on X86_32 && OLPC
  	help
  	  Say Y to enable support for the battery on the OLPC laptop.
  
  config BATTERY_TOSA
  	tristate "Sharp SL-6000 (tosa) battery"
  	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
  	help
  	  Say Y to enable support for the battery on the Sharp Zaurus
  	  SL-6000 (tosa) models.
  
  config BATTERY_COLLIE
  	tristate "Sharp SL-5500 (collie) battery"
  	depends on SA1100_COLLIE && MCP_UCB1200
  	help
  	  Say Y to enable support for the battery on the Sharp Zaurus
  	  SL-5500 (collie) models.
  
  config BATTERY_WM97XX
  	bool "WM97xx generic battery driver"
  	depends on TOUCHSCREEN_WM97XX=y
  	help
  	  Say Y to enable support for battery measured by WM97xx aux port.
  
  config BATTERY_SBS
          tristate "SBS Compliant gas gauge"
          depends on I2C
          help
  	  Say Y to include support for SBS battery driver for SBS-compliant
  	  gas gauges.
  
  config BATTERY_BQ27x00
  	tristate "BQ27x00 battery driver"
  	depends on I2C || I2C=n
  	help
  	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
  
  config BATTERY_BQ27X00_I2C
  	bool "BQ27200/BQ27500 support"
  	depends on BATTERY_BQ27x00
  	depends on I2C
  	default y
  	help
  	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
  
  config BATTERY_BQ27X00_PLATFORM
  	bool "BQ27000 support"
  	depends on BATTERY_BQ27x00
  	default y
  	help
  	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
  
  config BATTERY_DA9030
  	tristate "DA9030 battery driver"
  	depends on PMIC_DA903X
  	help
  	  Say Y here to enable support for batteries charger integrated into
  	  DA9030 PMIC.
  
  config BATTERY_DA9052
  	tristate "Dialog DA9052 Battery"
  	depends on PMIC_DA9052
  	help
  	  Say Y here to enable support for batteries charger integrated into
  	  DA9052 PMIC.
  
  config BATTERY_MAX17040
  	tristate "Maxim MAX17040 Fuel Gauge"
  	depends on I2C
  	help
  	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
  	  in handheld and portable equipment. The MAX17040 is configured
  	  to operate with a single lithium cell
  
  config BATTERY_MAX17042
  	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
  	  in handheld and portable equipment. The MAX17042 is configured
  	  to operate with a single lithium cell. MAX8997 and MAX8966 are
  	  multi-function devices that include fuel gauages that are compatible
  	  with MAX17042. This driver also supports max17047/50 chips which are
  	  improved version of max17042.
  
  config BATTERY_Z2
  	tristate "Z2 battery driver"
  	depends on I2C && MACH_ZIPIT2
  	help
  	  Say Y to include support for the battery on the Zipit Z2.
  
  config BATTERY_S3C_ADC
  	tristate "Battery driver for Samsung ADC based monitoring"
  	depends on S3C_ADC
  	help
  	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
  
  config BATTERY_TWL4030_MADC
  	tristate "TWL4030 MADC battery driver"
  	depends on TWL4030_MADC
  	help
  	  Say Y here to enable this dumb driver for batteries managed
  	  through the TWL4030 MADC.
  
  config CHARGER_88PM860X
  	tristate "Marvell 88PM860x Charger driver"
  	depends on MFD_88PM860X && BATTERY_88PM860X
  	help
  	  Say Y here to enable charger for Marvell 88PM860x chip.
  
  config CHARGER_PCF50633
  	tristate "NXP PCF50633 MBC"
  	depends on MFD_PCF50633
  	help
  	 Say Y to include support for NXP PCF50633 Main Battery Charger.
  
  config BATTERY_JZ4740
  	tristate "Ingenic JZ4740 battery"
  	depends on MACH_JZ4740
  	depends on MFD_JZ4740_ADC
  	help
  	  Say Y to enable support for the battery on Ingenic JZ4740 based
  	  boards.
  
  	  This driver can be build as a module. If so, the module will be
  	  called jz4740-battery.
  
  config BATTERY_INTEL_MID
  	tristate "Battery driver for Intel MID platforms"
  	depends on INTEL_SCU_IPC && SPI
  	help
  	  Say Y here to enable the battery driver on Intel MID
  	  platforms.
  
  config BATTERY_RX51
  	tristate "Nokia RX-51 (N900) battery driver"
  	depends on TWL4030_MADC
  	help
  	  Say Y here to enable support for battery information on Nokia
  	  RX-51, also known as N900 tablet.
  
  config CHARGER_ISP1704
  	tristate "ISP1704 USB Charger Detection"
  	depends on USB_PHY
  	help
  	  Say Y to enable support for USB Charger Detection with
  	  ISP1707/ISP1704 USB transceivers.
  
  config CHARGER_MAX8903
  	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
  	help
  	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
  	  The driver supports controlling charger-enable and current-limit
  	  pins based on the status of charger connections with interrupt
  	  handlers.
  
  config SABRESD_MAX8903
  	tristate "Sabresd Board Battery DC-DC Charger for USB and Adapter Power"
  	depends on TOUCHSCREEN_MAX11801
  	help
  	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs on
  	  sabresd board.The driver supports controlling charger and battery
  	  based on the status of charger connections with interrupt handlers.
  
  config CHARGER_TWL4030
  	tristate "OMAP TWL4030 BCI charger driver"
  	depends on TWL4030_CORE
  	help
  	  Say Y here to enable support for TWL4030 Battery Charge Interface.
  
  config CHARGER_LP8727
  	tristate "TI/National Semiconductor LP8727 charger driver"
  	depends on I2C
  	help
  	  Say Y here to enable support for LP8727 Charger Driver.
  
  config CHARGER_LP8788
  	tristate "TI LP8788 charger driver"
  	depends on MFD_LP8788
  	depends on LP8788_ADC
  	depends on IIO
  	help
  	  Say Y to enable support for the LP8788 linear charger.
  
  config CHARGER_GPIO
  	tristate "GPIO charger"
  	depends on GPIOLIB
  	help
  	  Say Y to include support for chargers which report their online status
  	  through a GPIO pin.
  
  	  This driver can be build as a module. If so, the module will be
  	  called gpio-charger.
  
  config CHARGER_MANAGER
  	bool "Battery charger manager for multiple chargers"
  	depends on REGULATOR && RTC_CLASS
  	select EXTCON
  	help
            Say Y to enable charger-manager support, which allows multiple
            chargers attached to a battery and multiple batteries attached to a
            system. The charger-manager also can monitor charging status in
            runtime and in suspend-to-RAM by waking up the system periodically
            with help of suspend_again support.
  
  config CHARGER_MAX14577
  	tristate "Maxim MAX14577 MUIC battery charger driver"
  	depends on MFD_MAX14577
  	help
  	  Say Y to enable support for the battery charger control sysfs and
  	  platform data of MAX14577 MUICs.
  
  config CHARGER_MAX8997
  	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
  	depends on MFD_MAX8997 && REGULATOR_MAX8997
  	help
  	  Say Y to enable support for the battery charger control sysfs and
  	  platform data of MAX8997/LP3974 PMICs.
  
  config CHARGER_MAX8998
  	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
  	depends on MFD_MAX8998 && REGULATOR_MAX8998
  	help
  	  Say Y to enable support for the battery charger control sysfs and
  	  platform data of MAX8998/LP3974 PMICs.
  
  config CHARGER_BQ2415X
  	tristate "TI BQ2415x battery charger driver"
  	depends on I2C
  	help
  	  Say Y to enable support for the TI BQ2415x battery charger
  	  PMICs.
  
  	  You'll need this driver to charge batteries on e.g. Nokia
  	  RX-51/N900.
  
  config CHARGER_BQ24190
  	tristate "TI BQ24190 battery charger driver"
  	depends on I2C && GPIOLIB
  	help
  	  Say Y to enable support for the TI BQ24190 battery charger.
  
  config CHARGER_BQ24735
  	tristate "TI BQ24735 battery charger support"
  	depends on I2C && GPIOLIB
  	help
  	  Say Y to enable support for the TI BQ24735 battery charger.
  
  config CHARGER_SMB347
  	tristate "Summit Microelectronics SMB347 Battery Charger"
  	depends on I2C
  	select REGMAP_I2C
  	help
  	  Say Y to include support for Summit Microelectronics SMB347
  	  Battery Charger.
  
  config CHARGER_TPS65090
  	tristate "TPS65090 battery charger driver"
  	depends on MFD_TPS65090
  	help
  	 Say Y here to enable support for battery charging with TPS65090
  	 PMIC chips.
  
  config AB8500_BM
  	bool "AB8500 Battery Management Driver"
  	depends on AB8500_CORE && AB8500_GPADC
  	help
  	  Say Y to include support for AB8500 battery management.
  
  config BATTERY_GOLDFISH
  	tristate "Goldfish battery driver"
  	depends on GOLDFISH || COMPILE_TEST
  	depends on HAS_IOMEM
  	help
  	  Say Y to enable support for the battery and AC power in the
  	  Goldfish emulator.
  
  config IMX6_USB_CHARGER
  	bool "Freescale imx6 USB Charger"
  	depends on SOC_IMX6Q || SOC_IMX6SL || SOC_IMX6SX
  	help
  	  Say Y to enable Freescale imx6 USB Charger Detect.
  
  source "drivers/power/reset/Kconfig"
  
  endif # POWER_SUPPLY
  
  source "drivers/power/avs/Kconfig"